From: Rasesh Mody Date: Fri, 11 Dec 2015 06:36:37 +0000 (-0800) Subject: bnx2x: add guide X-Git-Tag: spdx-start~7775 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=47a298e79b593ace632044d263591b6da665cbc9;p=dpdk.git bnx2x: add guide Signed-off-by: Harish Patil Signed-off-by: Rasesh Mody --- diff --git a/MAINTAINERS b/MAINTAINERS index 3292e8492b..8a9022bfc2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -331,6 +331,7 @@ F: doc/guides/nics/pcap_ring.rst QLogic/Broadcom bnx2x F: drivers/net/bnx2x/ +F: doc/guides/nics/bnx2x.rst Ring PMD M: Bruce Richardson diff --git a/doc/guides/nics/bnx2x.rst b/doc/guides/nics/bnx2x.rst new file mode 100644 index 0000000000..7a94080191 --- /dev/null +++ b/doc/guides/nics/bnx2x.rst @@ -0,0 +1,314 @@ +.. BSD LICENSE + Copyright (c) 2015 QLogic Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of QLogic Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +BNX2X Poll Mode Driver +====================== + +The BNX2X poll mode driver library (**librte_pmd_bnx2x**) implements support +for **QLogic 578xx** 10/20 Gbps family of adapters as well as their virtual +functions (VF) in SR-IOV context. It is supported on several standard Linux +distros like Red Hat 7.x and SLES12 OS. It is compile-tested under FreeBSD OS. + +More information can be found at `QLogic Corporation's Official Website +`_. + +Supported Features +------------------ + +BNX2X PMD has support for: + +- Base L2 features +- Unicast/multicast filtering +- Promiscuous mode +- Port hardware statistics +- SR-IOV VF + +Non-supported Features +---------------------- + +The features not yet supported include: + +- TSS (Transmit Side Scaling) +- RSS (Receive Side Scaling) +- LRO/TSO offload +- Checksum offload +- SR-IOV PF + +Co-existence considerations +--------------------------- + +- BCM578xx being a CNA can have both NIC and Storage personalities. + However, coexistence with storage protocol drivers (cnic, bnx2fc and + bnx2fi) is not supported on the same adapter. So storage personality + has to be disabled on that adapter when used in DPDK applications. + +- For SR-IOV case, bnx2x PMD will be used to bind to SR-IOV VF device and + Linux native kernel driver (bnx2x) will be attached to SR-IOV PF. + + +Supported QLogic NICs +--------------------- + +- 578xx + +Prerequisites +------------- + +- Requires firmware version **7.2.51.0**. It is inbox on most of the + standard Linux distros. If it is not available visit + `QLogic Driver Download Center `_ + to get the required firmware. + +Pre-Installation Configuration +------------------------------ + +Config File Options +~~~~~~~~~~~~~~~~~~~ + +The following options can be modified in the ``.config`` file. Please note that +enabling debugging options may affect system performance. + +- ``CONFIG_RTE_LIBRTE_BNX2X_PMD`` (default **y**) + + Toggle compilation of bnx2x driver. + +- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG`` (default **n**) + + Toggle display of generic debugging messages. + +- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_INIT`` (default **n**) + + Toggle display of initialization related messages. + +- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_TX`` (default **n**) + + Toggle display of transmit fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_RX`` (default **n**) + + Toggle display of receive fast path run-time messages. + +- ``CONFIG_RTE_LIBRTE_BNX2X_DEBUG_PERIODIC`` (default **n**) + + Toggle display of register reads and writes. + + +.. _bnx2x_driver-compilation: + +Driver Compilation +~~~~~~~~~~~~~~~~~~ + +BNX2X PMD for Linux x86_64 gcc target, run the following "make" +command:: + + cd + make config T=x86_64-native-linuxapp-gcc install + +To compile BNX2X PMD for Linux x86_64 clang target, run the following "make" +command:: + + cd + make config T=x86_64-native-linuxapp-clang install + +To compile BNX2X PMD for Linux i686 gcc target, run the following "make" +command:: + + cd + make config T=i686-native-linuxapp-gcc install + +To compile BNX2X PMD for FreeBSD x86_64 clang target, run the following "gmake" +command:: + + cd + gmake config T=x86_64-native-bsdapp-clang install + +To compile BNX2X PMD for FreeBSD x86_64 gcc target, run the following "gmake" +command:: + + cd + gmake config T=x86_64-native-bsdapp-gcc install -Wl,-rpath=/usr/local/lib/gcc48 CC=gcc48 + +Linux +----- + +.. _bnx2x_Linux-installation: + +Linux Installation +~~~~~~~~~~~~~~~~~~ + +Sample Application Notes +~~~~~~~~~~~~~~~~~~~~~~~~ + +This section demonstrates how to launch ``testpmd`` with QLogic 578xx +devices managed by ``librte_pmd_bnx2x`` in Linux operating system. + +#. Request huge pages: + + .. code-block:: console + + echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages + +#. Load ``igb_uio`` or ``vfio-pci`` driver: + + .. code-block:: console + + insmod ./x86_64-native-linuxapp-gcc/kmod/igb_uio.ko + + or + + .. code-block:: console + + modprobe vfio-pci + +#. Bind the QLogic adapters to ``igb_uio`` or ``vfio-pci`` loaded in the + previous step:: + + ./tools/dpdk_nic_bind.py --bind igb_uio 0000:84:00.0 0000:84:00.1 + + or + + Setup VFIO permissions for regular users and then bind to ``vfio-pci``: + + .. code-block:: console + + sudo chmod a+x /dev/vfio + + sudo chmod 0666 /dev/vfio/* + + ./tools/dpdk_nic_bind.py --bind vfio-pci 0000:84:00.0 0000:84:00.1 + +#. Start ``testpmd`` with basic parameters: + + .. code-block:: console + + ./x86_64-native-linuxapp-gcc/app/testpmd -c 0xf -n 4 -- -i + + Example output: + + .. code-block:: console + + [...] + EAL: PCI device 0000:84:00.0 on NUMA socket 1 + EAL: probe driver: 14e4:168e rte_bnx2x_pmd + EAL: PCI memory mapped at 0x7f14f6fe5000 + EAL: PCI memory mapped at 0x7f14f67e5000 + EAL: PCI memory mapped at 0x7f15fbd9b000 + EAL: PCI device 0000:84:00.1 on NUMA socket 1 + EAL: probe driver: 14e4:168e rte_bnx2x_pmd + EAL: PCI memory mapped at 0x7f14f5fe5000 + EAL: PCI memory mapped at 0x7f14f57e5000 + EAL: PCI memory mapped at 0x7f15fbd4f000 + Interactive-mode selected + Configuring Port 0 (socket 0) + PMD: bnx2x_dev_tx_queue_setup(): fp[00] req_bd=512, thresh=512, + usable_bd=1020, total_bd=1024, + tx_pages=4 + PMD: bnx2x_dev_rx_queue_setup(): fp[00] req_bd=128, thresh=0, + usable_bd=510, total_bd=512, + rx_pages=1, cq_pages=8 + PMD: bnx2x_print_adapter_info(): + [...] + Checking link statuses... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> + +SR-IOV: Prerequisites and sample Application Notes +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +This section provides instructions to configure SR-IOV with Linux OS. + +#. Verify SR-IOV and ARI capabilities are enabled on the adapter using ``lspci``: + + .. code-block:: console + + lspci -s -vvv + + Example output: + + .. code-block:: console + + [...] + Capabilities: [1b8 v1] Alternative Routing-ID Interpretation (ARI) + [...] + Capabilities: [1c0 v1] Single Root I/O Virtualization (SR-IOV) + [...] + Kernel driver in use: igb_uio + +#. Load the kernel module: + + .. code-block:: console + + modprobe bnx2x + + Example output: + + .. code-block:: console + + systemd-udevd[4848]: renamed network interface eth0 to ens5f0 + systemd-udevd[4848]: renamed network interface eth1 to ens5f1 + +#. Bring up the PF ports: + + .. code-block:: console + + ifconfig ens5f0 up + ifconfig ens5f1 up + +#. Create VF device(s): + + Echo the number of VFs to be created into "sriov_numvfs" sysfs entry + of the parent PF. + + Example output: + + .. code-block:: console + + echo 2 > /sys/devices/pci0000:00/0000:00:03.0/0000:81:00.0/sriov_numvfs + + +#. Assign VF MAC address: + + Assign MAC address to the VF using iproute2 ulility. The syntax is: + ip link set vf mac + + Example output: + + .. code-block:: console + + ip link set ens5f0 vf 0 mac 52:54:00:2f:9d:e8 + + +#. PCI passthrough: + + The VF devices may be passed through to the guest VM using virt-manager or + virsh etc. bnx2x PMD should be used to bind the VF devices in the guest VM + using the instructions outlined in the Application notes below. diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst index 7bf2938c49..54d2b2cda2 100644 --- a/doc/guides/nics/index.rst +++ b/doc/guides/nics/index.rst @@ -40,6 +40,7 @@ Network Interface Controller Drivers :maxdepth: 3 :numbered: + bnx2x cxgbe e1000em ixgbe