From: Stephen Hemminger Date: Fri, 22 Jan 2016 01:38:37 +0000 (-0800) Subject: igb: set default thresholds based on MAC type X-Git-Tag: spdx-start~7413 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=4a41c17dba18;p=dpdk.git igb: set default thresholds based on MAC type This brings the DPDK igb driver inline with the behavior used by the current Linux driver. The IGB hardware has several different MAC types and the threshold values that work vary based on the hardware. Since DPDK 1.8 it has been up to devices to provide the correct default configuration parameter. But the igb driver gives values that are broken on some devices, and always causes a warning message at startup. Please test this on real hardware, I don't have the luxury of a hardware lab full of variations of this chip. Signed-off-by: Stephen Hemminger Acked-by: Wenzhuo Lu --- diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c index e3f50cc7ba..9a34d0113e 100644 --- a/drivers/net/e1000/igb_ethdev.c +++ b/drivers/net/e1000/igb_ethdev.c @@ -61,13 +61,14 @@ * Default values for port configuration */ #define IGB_DEFAULT_RX_FREE_THRESH 32 -#define IGB_DEFAULT_RX_PTHRESH 8 + +#define IGB_DEFAULT_RX_PTHRESH ((hw->mac.type == e1000_i354) ? 12 : 8) #define IGB_DEFAULT_RX_HTHRESH 8 -#define IGB_DEFAULT_RX_WTHRESH 0 +#define IGB_DEFAULT_RX_WTHRESH ((hw->mac.type == e1000_82576) ? 1 : 4) -#define IGB_DEFAULT_TX_PTHRESH 32 -#define IGB_DEFAULT_TX_HTHRESH 0 -#define IGB_DEFAULT_TX_WTHRESH 0 +#define IGB_DEFAULT_TX_PTHRESH ((hw->mac.type == e1000_i354) ? 20 : 8) +#define IGB_DEFAULT_TX_HTHRESH 1 +#define IGB_DEFAULT_TX_WTHRESH ((hw->mac.type == e1000_82576) ? 1 : 16) #define IGB_HKEY_MAX_INDEX 10 diff --git a/drivers/net/e1000/igb_rxtx.c b/drivers/net/e1000/igb_rxtx.c index 74587b524a..e527895e49 100644 --- a/drivers/net/e1000/igb_rxtx.c +++ b/drivers/net/e1000/igb_rxtx.c @@ -1309,13 +1309,13 @@ eth_igb_tx_queue_setup(struct rte_eth_dev *dev, * driver. */ if (tx_conf->tx_free_thresh != 0) - PMD_INIT_LOG(WARNING, "The tx_free_thresh parameter is not " + PMD_INIT_LOG(INFO, "The tx_free_thresh parameter is not " "used for the 1G driver."); if (tx_conf->tx_rs_thresh != 0) - PMD_INIT_LOG(WARNING, "The tx_rs_thresh parameter is not " + PMD_INIT_LOG(INFO, "The tx_rs_thresh parameter is not " "used for the 1G driver."); - if (tx_conf->tx_thresh.wthresh == 0) - PMD_INIT_LOG(WARNING, "To improve 1G driver performance, " + if (tx_conf->tx_thresh.wthresh == 0 && hw->mac.type != e1000_82576) + PMD_INIT_LOG(INFO, "To improve 1G driver performance, " "consider setting the TX WTHRESH value to 4, 8, " "or 16.");