From: Maxime Coquelin Date: Tue, 26 Jan 2021 10:16:03 +0000 (+0100) Subject: net/virtio: move PCI specific dev init to PCI ethdev init X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=512e27eeb743;p=dpdk.git net/virtio: move PCI specific dev init to PCI ethdev init This patch moves the PCI specific initialization from eth_virtio_dev_init() to eth_virtio_pci_init(). Signed-off-by: Maxime Coquelin Reviewed-by: Chenbo Xia Reviewed-by: David Marchand --- diff --git a/drivers/net/virtio/virtio_ethdev.c b/drivers/net/virtio/virtio_ethdev.c index 21f49e3300..ca9351b2bd 100644 --- a/drivers/net/virtio/virtio_ethdev.c +++ b/drivers/net/virtio/virtio_ethdev.c @@ -1676,7 +1676,6 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features) struct virtio_hw *hw = eth_dev->data->dev_private; struct virtio_net_config *config; struct virtio_net_config local_config; - struct rte_pci_device *pci_dev = NULL; int ret; /* Reset the device although not necessary at startup */ @@ -1697,9 +1696,6 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features) hw->weak_barriers = !vtpci_with_feature(hw, VIRTIO_F_ORDER_PLATFORM); - if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY || hw->bus_type == VIRTIO_BUS_PCI_MODERN) - pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev); - /* If host does not support both status and MSI-X then disable LSC */ if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS) && hw->use_msix != VIRTIO_MSIX_NONE) @@ -1828,45 +1824,9 @@ virtio_init_device(struct rte_eth_dev *eth_dev, uint64_t req_features) vtpci_reinit_complete(hw); - if (pci_dev) - PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x", - eth_dev->data->port_id, pci_dev->id.vendor_id, - pci_dev->id.device_id); - return 0; } -/* - * Remap the PCI device again (IO port map for legacy device and - * memory map for modern device), so that the secondary process - * could have the PCI initiated correctly. - */ -static int -virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw) -{ - if (hw->bus_type == VIRTIO_BUS_PCI_MODERN) { - /* - * We don't have to re-parse the PCI config space, since - * rte_pci_map_device() makes sure the mapped address - * in secondary process would equal to the one mapped in - * the primary process: error will be returned if that - * requirement is not met. - * - * That said, we could simply reuse all cap pointers - * (such as dev_cfg, common_cfg, etc.) parsed from the - * primary process, which is stored in shared memory. - */ - if (rte_pci_map_device(pci_dev)) { - PMD_INIT_LOG(DEBUG, "failed to map pci device!"); - return -1; - } - } else if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) { - if (rte_pci_ioport_map(pci_dev, 0, VTPCI_IO(hw)) < 0) - return -1; - } - - return 0; -} static void virtio_set_vtpci_ops(struct virtio_hw *hw) @@ -1909,17 +1869,11 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev) eth_dev->rx_descriptor_done = virtio_dev_rx_queue_done; if (rte_eal_process_type() == RTE_PROC_SECONDARY) { - if (hw->bus_type != VIRTIO_BUS_USER) { - ret = virtio_remap_pci(RTE_ETH_DEV_TO_PCI(eth_dev), hw); - if (ret) - return ret; - } - virtio_set_vtpci_ops(hw); set_rxtx_funcs(eth_dev); - return 0; } + ret = virtio_dev_devargs_parse(eth_dev->device->devargs, &speed, &vectorized); if (ret < 0) return ret; @@ -1936,15 +1890,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev) } hw->port_id = eth_dev->data->port_id; - /* For virtio_user case the hw->virtio_user_dev is populated by - * virtio_user_eth_dev_alloc() before eth_virtio_dev_init() is called. - */ - if (hw->bus_type != VIRTIO_BUS_USER) { - ret = vtpci_init(RTE_ETH_DEV_TO_PCI(eth_dev), hw); - if (ret) - goto err_vtpci_init; - } - rte_spinlock_init(&hw->state_lock); /* reset device and negotiate default features */ @@ -1971,12 +1916,6 @@ eth_virtio_dev_init(struct rte_eth_dev *eth_dev) return 0; err_virtio_init: - if (hw->bus_type == VIRTIO_BUS_PCI_MODERN || hw->bus_type == VIRTIO_BUS_PCI_LEGACY) { - rte_pci_unmap_device(RTE_ETH_DEV_TO_PCI(eth_dev)); - if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) - rte_pci_ioport_unmap(VTPCI_IO(hw)); - } -err_vtpci_init: rte_free(eth_dev->data->mac_addrs); eth_dev->data->mac_addrs = NULL; return ret; diff --git a/drivers/net/virtio/virtio_pci_ethdev.c b/drivers/net/virtio/virtio_pci_ethdev.c index 6427e57290..8793bf73ee 100644 --- a/drivers/net/virtio/virtio_pci_ethdev.c +++ b/drivers/net/virtio/virtio_pci_ethdev.c @@ -32,10 +32,79 @@ static const struct rte_pci_id pci_id_virtio_map[] = { { .vendor_id = 0, /* sentinel */ }, }; + +/* + * Remap the PCI device again (IO port map for legacy device and + * memory map for modern device), so that the secondary process + * could have the PCI initiated correctly. + */ +static int +virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw) +{ + if (hw->bus_type == VIRTIO_BUS_PCI_MODERN) { + /* + * We don't have to re-parse the PCI config space, since + * rte_pci_map_device() makes sure the mapped address + * in secondary process would equal to the one mapped in + * the primary process: error will be returned if that + * requirement is not met. + * + * That said, we could simply reuse all cap pointers + * (such as dev_cfg, common_cfg, etc.) parsed from the + * primary process, which is stored in shared memory. + */ + if (rte_pci_map_device(pci_dev)) { + PMD_INIT_LOG(DEBUG, "failed to map pci device!"); + return -1; + } + } else if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) { + if (rte_pci_ioport_map(pci_dev, 0, VTPCI_IO(hw)) < 0) + return -1; + } + + return 0; +} + static int eth_virtio_pci_init(struct rte_eth_dev *eth_dev) { - return eth_virtio_dev_init(eth_dev); + struct virtio_pci_dev *dev = eth_dev->data->dev_private; + struct virtio_hw *hw = &dev->hw; + struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev); + int ret; + + if (rte_eal_process_type() == RTE_PROC_PRIMARY) { + ret = vtpci_init(RTE_ETH_DEV_TO_PCI(eth_dev), hw); + if (ret) { + PMD_INIT_LOG(ERR, "Failed to init PCI device\n"); + return -1; + } + } else { + ret = virtio_remap_pci(RTE_ETH_DEV_TO_PCI(eth_dev), hw); + if (ret < 0) { + PMD_INIT_LOG(ERR, "Failed to remap PCI device\n"); + return -1; + } + } + + ret = eth_virtio_dev_init(eth_dev); + if (ret < 0) { + PMD_INIT_LOG(ERR, "Failed to init virtio device\n"); + goto err_unmap; + } + + PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x", + eth_dev->data->port_id, pci_dev->id.vendor_id, + pci_dev->id.device_id); + + return 0; + +err_unmap: + rte_pci_unmap_device(RTE_ETH_DEV_TO_PCI(eth_dev)); + if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) + rte_pci_ioport_unmap(VTPCI_IO(hw)); + + return ret; } static int