From: Cunming Liang Date: Tue, 17 Feb 2015 02:08:00 +0000 (+0800) Subject: eal: new option --lcores for cpu assignment X-Git-Tag: spdx-start~9579 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=53e54bf81700;p=dpdk.git eal: new option --lcores for cpu assignment It supports one new eal long option '--lcores' for EAL thread cpuset assignment. The format pattern: --lcores='[<,lcores[@cpus]>...]' lcores, cpus could be a single digit/range or a group. '(' and ')' are necessary if it's a group. If not supply '@cpus', the value of cpus uses the same as lcores. e.g. '1,2@(5-7),(3-5)@(0,2),(0,6),7-8' means starting 9 EAL thread as below lcore 0 runs on cpuset 0x41 (cpu 0,6) lcore 1 runs on cpuset 0x2 (cpu 1) lcore 2 runs on cpuset 0xe0 (cpu 5,6,7) lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2) lcore 6 runs on cpuset 0x41 (cpu 0,6) lcore 7 runs on cpuset 0x80 (cpu 7) lcore 8 runs on cpuset 0x100 (cpu 8) Test report: http://dpdk.org/ml/archives/dev/2015-February/013383.html Signed-off-by: Cunming Liang Acked-by: Olivier Matz Tested-by: Qun Wan Acked-by: Konstantin Ananyev --- diff --git a/lib/librte_eal/common/eal_common_options.c b/lib/librte_eal/common/eal_common_options.c index 4314e4e0d2..c59370b9cb 100644 --- a/lib/librte_eal/common/eal_common_options.c +++ b/lib/librte_eal/common/eal_common_options.c @@ -45,6 +45,7 @@ #include #include #include +#include #include "eal_internal_cfg.h" #include "eal_options.h" @@ -73,6 +74,7 @@ eal_long_options[] = { {OPT_FILE_PREFIX, 1, NULL, OPT_FILE_PREFIX_NUM }, {OPT_HELP, 0, NULL, OPT_HELP_NUM }, {OPT_HUGE_DIR, 1, NULL, OPT_HUGE_DIR_NUM }, + {OPT_LCORES, 1, NULL, OPT_LCORES_NUM }, {OPT_LOG_LEVEL, 1, NULL, OPT_LOG_LEVEL_NUM }, {OPT_MASTER_LCORE, 1, NULL, OPT_MASTER_LCORE_NUM }, {OPT_NO_HPET, 0, NULL, OPT_NO_HPET_NUM }, @@ -258,9 +260,11 @@ eal_parse_corelist(const char *corelist) if (min == RTE_MAX_LCORE) min = idx; for (idx = min; idx <= max; idx++) { - cfg->lcore_role[idx] = ROLE_RTE; - lcore_config[idx].core_index = count; - count++; + if (cfg->lcore_role[idx] != ROLE_RTE) { + cfg->lcore_role[idx] = ROLE_RTE; + lcore_config[idx].core_index = count; + count++; + } } min = RTE_MAX_LCORE; } else @@ -295,6 +299,283 @@ eal_parse_master_lcore(const char *arg) return 0; } +/* + * Parse elem, the elem could be single number/range or '(' ')' group + * 1) A single number elem, it's just a simple digit. e.g. 9 + * 2) A single range elem, two digits with a '-' between. e.g. 2-6 + * 3) A group elem, combines multiple 1) or 2) with '( )'. e.g (0,2-4,6) + * Within group elem, '-' used for a range separator; + * ',' used for a single number. + */ +static int +eal_parse_set(const char *input, uint16_t set[], unsigned num) +{ + unsigned idx; + const char *str = input; + char *end = NULL; + unsigned min, max; + + memset(set, 0, num * sizeof(uint16_t)); + + while (isblank(*str)) + str++; + + /* only digit or left bracket is qualify for start point */ + if ((!isdigit(*str) && *str != '(') || *str == '\0') + return -1; + + /* process single number or single range of number */ + if (*str != '(') { + errno = 0; + idx = strtoul(str, &end, 10); + if (errno || end == NULL || idx >= num) + return -1; + else { + while (isblank(*end)) + end++; + + min = idx; + max = idx; + if (*end == '-') { + /* process single - */ + end++; + while (isblank(*end)) + end++; + if (!isdigit(*end)) + return -1; + + errno = 0; + idx = strtoul(end, &end, 10); + if (errno || end == NULL || idx >= num) + return -1; + max = idx; + while (isblank(*end)) + end++; + if (*end != ',' && *end != '\0') + return -1; + } + + if (*end != ',' && *end != '\0' && + *end != '@') + return -1; + + for (idx = RTE_MIN(min, max); + idx <= RTE_MAX(min, max); idx++) + set[idx] = 1; + + return end - input; + } + } + + /* process set within bracket */ + str++; + while (isblank(*str)) + str++; + if (*str == '\0') + return -1; + + min = RTE_MAX_LCORE; + do { + + /* go ahead to the first digit */ + while (isblank(*str)) + str++; + if (!isdigit(*str)) + return -1; + + /* get the digit value */ + errno = 0; + idx = strtoul(str, &end, 10); + if (errno || end == NULL || idx >= num) + return -1; + + /* go ahead to separator '-',',' and ')' */ + while (isblank(*end)) + end++; + if (*end == '-') { + if (min == RTE_MAX_LCORE) + min = idx; + else /* avoid continuous '-' */ + return -1; + } else if ((*end == ',') || (*end == ')')) { + max = idx; + if (min == RTE_MAX_LCORE) + min = idx; + for (idx = RTE_MIN(min, max); + idx <= RTE_MAX(min, max); idx++) + set[idx] = 1; + + min = RTE_MAX_LCORE; + } else + return -1; + + str = end + 1; + } while (*end != '\0' && *end != ')'); + + return str - input; +} + +/* convert from set array to cpuset bitmap */ +static int +convert_to_cpuset(rte_cpuset_t *cpusetp, + uint16_t *set, unsigned num) +{ + unsigned idx; + + CPU_ZERO(cpusetp); + + for (idx = 0; idx < num; idx++) { + if (!set[idx]) + continue; + + if (!lcore_config[idx].detected) { + RTE_LOG(ERR, EAL, "core %u " + "unavailable\n", idx); + return -1; + } + + CPU_SET(idx, cpusetp); + } + + return 0; +} + +/* + * The format pattern: --lcores='[<,lcores[@cpus]>...]' + * lcores, cpus could be a single digit/range or a group. + * '(' and ')' are necessary if it's a group. + * If not supply '@cpus', the value of cpus uses the same as lcores. + * e.g. '1,2@(5-7),(3-5)@(0,2),(0,6),7-8' means start 9 EAL thread as below + * lcore 0 runs on cpuset 0x41 (cpu 0,6) + * lcore 1 runs on cpuset 0x2 (cpu 1) + * lcore 2 runs on cpuset 0xe0 (cpu 5,6,7) + * lcore 3,4,5 runs on cpuset 0x5 (cpu 0,2) + * lcore 6 runs on cpuset 0x41 (cpu 0,6) + * lcore 7 runs on cpuset 0x80 (cpu 7) + * lcore 8 runs on cpuset 0x100 (cpu 8) + */ +static int +eal_parse_lcores(const char *lcores) +{ + struct rte_config *cfg = rte_eal_get_configuration(); + static uint16_t set[RTE_MAX_LCORE]; + unsigned idx = 0; + int i; + unsigned count = 0; + const char *lcore_start = NULL; + const char *end = NULL; + int offset; + rte_cpuset_t cpuset; + int lflags = 0; + int ret = -1; + + if (lcores == NULL) + return -1; + + /* Remove all blank characters ahead and after */ + while (isblank(*lcores)) + lcores++; + i = strnlen(lcores, sysconf(_SC_ARG_MAX)); + while ((i > 0) && isblank(lcores[i - 1])) + i--; + + CPU_ZERO(&cpuset); + + /* Reset lcore config */ + for (idx = 0; idx < RTE_MAX_LCORE; idx++) { + cfg->lcore_role[idx] = ROLE_OFF; + lcore_config[idx].core_index = -1; + CPU_ZERO(&lcore_config[idx].cpuset); + } + + /* Get list of cores */ + do { + while (isblank(*lcores)) + lcores++; + if (*lcores == '\0') + goto err; + + /* record lcore_set start point */ + lcore_start = lcores; + + /* go across a complete bracket */ + if (*lcore_start == '(') { + lcores += strcspn(lcores, ")"); + if (*lcores++ == '\0') + goto err; + } + + /* scan the separator '@', ','(next) or '\0'(finish) */ + lcores += strcspn(lcores, "@,"); + + if (*lcores == '@') { + /* explicit assign cpu_set */ + offset = eal_parse_set(lcores + 1, set, RTE_DIM(set)); + if (offset < 0) + goto err; + + /* prepare cpu_set and update the end cursor */ + if (0 > convert_to_cpuset(&cpuset, + set, RTE_DIM(set))) + goto err; + end = lcores + 1 + offset; + } else { /* ',' or '\0' */ + /* haven't given cpu_set, current loop done */ + end = lcores; + + /* go back to check - */ + offset = strcspn(lcore_start, "(-"); + if (offset < (end - lcore_start) && + *(lcore_start + offset) != '(') + lflags = 1; + } + + if (*end != ',' && *end != '\0') + goto err; + + /* parse lcore_set from start point */ + if (0 > eal_parse_set(lcore_start, set, RTE_DIM(set))) + goto err; + + /* without '@', by default using lcore_set as cpu_set */ + if (*lcores != '@' && + 0 > convert_to_cpuset(&cpuset, set, RTE_DIM(set))) + goto err; + + /* start to update lcore_set */ + for (idx = 0; idx < RTE_MAX_LCORE; idx++) { + if (!set[idx]) + continue; + + if (cfg->lcore_role[idx] != ROLE_RTE) { + lcore_config[idx].core_index = count; + cfg->lcore_role[idx] = ROLE_RTE; + count++; + } + + if (lflags) { + CPU_ZERO(&cpuset); + CPU_SET(idx, &cpuset); + } + rte_memcpy(&lcore_config[idx].cpuset, &cpuset, + sizeof(rte_cpuset_t)); + } + + lcores = end + 1; + } while (*end != '\0'); + + if (count == 0) + goto err; + + cfg->lcore_count = count; + lcores_parsed = 1; + ret = 0; + +err: + + return ret; +} + static int eal_parse_syslog(const char *facility, struct internal_config *conf) { @@ -495,6 +776,13 @@ eal_parse_common_option(int opt, const char *optarg, conf->log_level = log; break; } + case OPT_LCORES_NUM: + if (eal_parse_lcores(optarg) < 0) { + RTE_LOG(ERR, EAL, "invalid parameter for --" + OPT_LCORES "\n"); + return -1; + } + break; /* don't know what to do, leave this to caller */ default: @@ -533,7 +821,7 @@ eal_check_common_options(struct internal_config *internal_cfg) if (!lcores_parsed) { RTE_LOG(ERR, EAL, "CPU cores must be enabled with options " - "-c or -l\n"); + "-c, -l or --lcores\n"); return -1; } if (cfg->lcore_role[cfg->master_lcore] != ROLE_RTE) { @@ -587,6 +875,14 @@ eal_common_usage(void) " -l CORELIST List of cores to run on\n" " The argument format is [-c2][,c3[-c4],...]\n" " where c1, c2, etc are core indexes between 0 and %d\n" + " --"OPT_LCORES" COREMAP Map lcore set to physical cpu set\n" + " The argument format is\n" + " '[<,lcores[@cpus]>...]'\n" + " lcores and cpus list are grouped by '(' and ')'\n" + " Within the group, '-' is used for range separator,\n" + " ',' is used for single number separator.\n" + " '( )' can be omitted for single element group,\n" + " '@' can be omitted if cpus and lcores have the same value\n" " --"OPT_MASTER_LCORE" ID Core ID that is used as master\n" " -n CHANNELS Number of memory channels\n" " -m MB Memory to allocate (see also --"OPT_SOCKET_MEM")\n" diff --git a/lib/librte_eal/common/eal_options.h b/lib/librte_eal/common/eal_options.h index d199a00a18..f6714d90c3 100644 --- a/lib/librte_eal/common/eal_options.h +++ b/lib/librte_eal/common/eal_options.h @@ -53,6 +53,8 @@ enum { OPT_FILE_PREFIX_NUM, #define OPT_HUGE_DIR "huge-dir" OPT_HUGE_DIR_NUM, +#define OPT_LCORES "lcores" + OPT_LCORES_NUM, #define OPT_LOG_LEVEL "log-level" OPT_LOG_LEVEL_NUM, #define OPT_MASTER_LCORE "master-lcore" diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile index 1b6c4844fc..4da9d273ae 100644 --- a/lib/librte_eal/linuxapp/eal/Makefile +++ b/lib/librte_eal/linuxapp/eal/Makefile @@ -99,6 +99,7 @@ CFLAGS_eal_hugepage_info.o := -D_GNU_SOURCE CFLAGS_eal_pci.o := -D_GNU_SOURCE CFLAGS_eal_pci_vfio.o := -D_GNU_SOURCE CFLAGS_eal_common_whitelist.o := -D_GNU_SOURCE +CFLAGS_eal_common_options.o := -D_GNU_SOURCE # workaround for a gcc bug with noreturn attribute # http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603