From: Wenzhuo Lu <wenzhuo.lu@intel.com>
Date: Fri, 5 Jun 2015 05:21:52 +0000 (+0800)
Subject: ixgbe/base: rework X550em PHY setup function
X-Git-Tag: spdx-start~9085
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=54128402f47eff4b74162c252992651699302c8a;p=dpdk.git

ixgbe/base: rework X550em PHY setup function

This patch cleans up the ixgbe_setup_internal_phy_ x550em() function as follows:
 - Renames it to ixgbe_setup_internal_phy_t_x550em to clarify that it is
   specific to copper
 - Returns an error if called for non-copper devices
 - Corrects the comments
 - Removed the LASI(Link Alarm Status Interrupt) status register checks as
   this was incorrect and never worked correctly anyway.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---

diff --git a/drivers/net/ixgbe/base/ixgbe_x550.c b/drivers/net/ixgbe/base/ixgbe_x550.c
index 21f8971a50..bc0ca53e0c 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.c
+++ b/drivers/net/ixgbe/base/ixgbe_x550.c
@@ -1150,7 +1150,8 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw)
 		phy->ops.write_reg = ixgbe_write_phy_reg_x550em;
 		break;
 	case ixgbe_phy_x550em_ext_t:
-		phy->ops.setup_internal_link = ixgbe_setup_internal_phy_x550em;
+		phy->ops.setup_internal_link =
+					 ixgbe_setup_internal_phy_t_x550em;
 		phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em;
 		break;
 	default:
@@ -1537,35 +1538,27 @@ s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw,
 }
 
 /**
- * ixgbe_setup_internal_phy_x550em - Configure integrated KR PHY
+ * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link
  * @hw: point to hardware structure
  *
- * Configures the integrated KR PHY to talk to the external PHY. The base
- * driver will call this function when it gets notification via interrupt from
- * the external PHY. This function forces the internal PHY into iXFI mode at
- * the correct speed.
+ * Configures the link between the integrated KR PHY and the external X557 PHY
+ * The driver will call this function when it gets a link status change
+ * interrupt from the X557 PHY. This function configures the link speed
+ * between the PHYs to match the link speed of the BASE-T link.
  *
  * A return of a non-zero value indicates an error, and the base driver should
  * not report link up.
  */
-s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw)
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw)
 {
 	u32 status;
-	u16 lasi, autoneg_status, speed;
+	u16 autoneg_status, speed;
 	ixgbe_link_speed force_speed;
 
-	/* Verify that the external link status has changed */
-	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_XENPAK_LASI_STATUS,
-				      IXGBE_MDIO_PMA_PMD_DEV_TYPE,
-				      &lasi);
-	if (status != IXGBE_SUCCESS)
-		return status;
-
-	/* If there was no change in link status, we can just exit */
-	if (!(lasi & IXGBE_XENPAK_LASI_LINK_STATUS_ALARM))
-		return IXGBE_SUCCESS;
+	if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper)
+		return IXGBE_ERR_CONFIG;
 
-	/* we read this twice back to back to indicate current status */
+	/* read this twice back to back to indicate current status */
 	status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS,
 				      IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
 				      &autoneg_status);
diff --git a/drivers/net/ixgbe/base/ixgbe_x550.h b/drivers/net/ixgbe/base/ixgbe_x550.h
index a60c7ce348..bd6ce9dc62 100644
--- a/drivers/net/ixgbe/base/ixgbe_x550.h
+++ b/drivers/net/ixgbe/base/ixgbe_x550.h
@@ -83,7 +83,7 @@ s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw);
 s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw);
 s32 ixgbe_setup_kx4_x550em(struct ixgbe_hw *hw);
 s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw);
-s32 ixgbe_setup_internal_phy_x550em(struct ixgbe_hw *hw);
+s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw);
 s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw);
 u32 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw);
 void ixgbe_disable_rx_x550(struct ixgbe_hw *hw);