From: Olga Shern Date: Sat, 12 Dec 2015 16:20:51 +0000 (+0200) Subject: mlx4: update documentation X-Git-Tag: spdx-start~7746 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=54f5a7a224e86e6abbea8a2a1a9e5cd211177c77;p=dpdk.git mlx4: update documentation -Split "Features" and "Limitations" sections. -Update limitations with missing information. -Update prerequisites with supported MLNX_OFED release, firmware and CPU architectures. -Enhance usage example with openibd script. Signed-off-by: Olga Shern Signed-off-by: Adrien Mazarguil --- diff --git a/doc/guides/nics/mlx4.rst b/doc/guides/nics/mlx4.rst index 562db060b0..62f0c31eb9 100644 --- a/doc/guides/nics/mlx4.rst +++ b/doc/guides/nics/mlx4.rst @@ -78,8 +78,8 @@ long as they share the same MAC address. Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs. -Features and limitations ------------------------- +Features +--------- - RSS, also known as RCA, is supported. In this mode the number of configured RX queues must be a power of two. @@ -91,11 +91,17 @@ Features and limitations - Scattered packets are supported for TX and RX. - Inner L3/L4 (IP, TCP and UDP) TX/RX checksum offloading and validation. - Outer L3 (IP) TX/RX checksum offloading and validation for VXLAN frames. +- Secondary process TX is supported. -.. break +Limitations +----------- - RSS hash key cannot be modified. +- RSS RETA cannot be configured +- RSS always includes L3 (IPv4/IPv6) and L4 (UDP/TCP). They cannot be + dissociated. - Hardware counters are not implemented (they are software counters). +- Secondary process RX is not supported Configuration ------------- @@ -237,8 +243,9 @@ DPDK and must be installed separately: Currently supported by DPDK: -- Mellanox OFED **3.0**. -- Firmware version **2.34.5000** and higher. +- Mellanox OFED **3.1**. +- Firmware version **2.35.5100** and higher. +- Supported architectures: **x86_64** and **POWER8**. Getting Mellanox OFED ~~~~~~~~~~~~~~~~~~~~~ @@ -272,6 +279,13 @@ devices managed by librte_pmd_mlx4. modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib + Alternatively if MLNX_OFED is fully installed, the follwoing script can + be run: + + .. code-block:: console + + /etc/init.d/openibd restart + .. note:: User space I/O kernel modules (uio and igb_uio) are not used and do