From: Bernard Iremonger Date: Tue, 13 Dec 2016 11:40:35 +0000 (+0000) Subject: net/ixgbe: move set VF functions from the ethdev X-Git-Tag: spdx-start~5007 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=57aa1fd284d5ae529dbbf5a947b2e0be68088458;p=dpdk.git net/ixgbe: move set VF functions from the ethdev Move the following functions from eth_dev_ops to the ixgbe PMD and rename: ixgbe_set_pool_rx_mode ixgbe_set_pool_rx ixgbe_set_pool_tx ixgbe_set_pool_vlan_filter ixgbe_set_vf_rate_limit Rename the functions to the following: rte_pmd_ixgbe_set_vf_rxmode rte_pmd_ixgbe_set_vf_rx rte_pmd_ixgbe_set_vf_tx rte_pmd_ixgbe_set_vf_vlan_filter rte_pmd_ixgbe_set_vf_rate_limit Use public function internally Signed-off-by: Bernard Iremonger --- diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 224c9475a4..f93b951890 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -2348,7 +2348,8 @@ ixgbe_dev_start(struct rte_eth_dev *dev) for (vf = 0; vf < pci_dev->max_vfs; vf++) for (idx = 0; idx < IXGBE_MAX_QUEUE_NUM_PER_VF; idx++) if (vfinfo[vf].tx_rate[idx] != 0) - ixgbe_set_vf_rate_limit(dev, vf, + rte_pmd_ixgbe_set_vf_rate_limit( + dev->data->port_id, vf, vfinfo[vf].tx_rate[idx], 1 << idx); } @@ -5072,6 +5073,271 @@ rte_pmd_ixgbe_set_vf_vlan_stripq(uint8_t port, uint16_t vf, uint8_t on) return 0; } +int +rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on) +{ + int val = 0; + struct rte_eth_dev *dev; + struct rte_eth_dev_info dev_info; + struct ixgbe_hw *hw; + uint32_t vmolr; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); + + dev = &rte_eth_devices[port]; + rte_eth_dev_info_get(port, &dev_info); + + if (strstr(dev_info.driver_name, "ixgbe_vf")) + return -ENOTSUP; + + if (vf >= dev_info.max_vfs) + return -EINVAL; + + if (on > 1) + return -EINVAL; + + hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); + + if (hw->mac.type == ixgbe_mac_82598EB) { + PMD_INIT_LOG(ERR, "setting VF receive mode set should be done" + " on 82599 hardware and newer"); + return -ENOTSUP; + } + if (ixgbe_vmdq_mode_check(hw) < 0) + return -ENOTSUP; + + val = ixgbe_convert_vm_rx_mask_to_val(rx_mask, val); + + if (on) + vmolr |= val; + else + vmolr &= ~val; + + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); + + return 0; +} + +int +rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on) +{ + struct rte_eth_dev *dev; + struct rte_eth_dev_info dev_info; + uint32_t reg, addr; + uint32_t val; + const uint8_t bit1 = 0x1; + struct ixgbe_hw *hw; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); + + dev = &rte_eth_devices[port]; + rte_eth_dev_info_get(port, &dev_info); + + if (strstr(dev_info.driver_name, "ixgbe_vf")) + return -ENOTSUP; + + if (vf >= dev_info.max_vfs) + return -EINVAL; + + if (on > 1) + return -EINVAL; + + hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + + if (ixgbe_vmdq_mode_check(hw) < 0) + return -ENOTSUP; + + /* for vf >= 32, set bit in PFVFRE[1], otherwise PFVFRE[0] */ + if (vf >= 32) { + addr = IXGBE_VFRE(1); + val = bit1 << (vf - 32); + } else { + addr = IXGBE_VFRE(0); + val = bit1 << vf; + } + + reg = IXGBE_READ_REG(hw, addr); + + if (on) + reg |= val; + else + reg &= ~val; + + IXGBE_WRITE_REG(hw, addr, reg); + + return 0; +} + +int +rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on) +{ + struct rte_eth_dev *dev; + struct rte_eth_dev_info dev_info; + uint32_t reg, addr; + uint32_t val; + const uint8_t bit1 = 0x1; + + struct ixgbe_hw *hw; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); + + dev = &rte_eth_devices[port]; + rte_eth_dev_info_get(port, &dev_info); + + if (strstr(dev_info.driver_name, "ixgbe_vf")) + return -ENOTSUP; + + if (vf >= dev_info.max_vfs) + return -EINVAL; + + if (on > 1) + return -EINVAL; + + hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + if (ixgbe_vmdq_mode_check(hw) < 0) + return -ENOTSUP; + + /* for vf >= 32, set bit in PFVFTE[1], otherwise PFVFTE[0] */ + if (vf >= 32) { + addr = IXGBE_VFTE(1); + val = bit1 << (vf - 32); + } else { + addr = IXGBE_VFTE(0); + val = bit1 << vf; + } + + reg = IXGBE_READ_REG(hw, addr); + + if (on) + reg |= val; + else + reg &= ~val; + + IXGBE_WRITE_REG(hw, addr, reg); + + return 0; +} + +int +rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, + uint64_t vf_mask, uint8_t vlan_on) +{ + struct rte_eth_dev *dev; + struct rte_eth_dev_info dev_info; + int ret = 0; + uint16_t vf_idx; + struct ixgbe_hw *hw; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); + + dev = &rte_eth_devices[port]; + rte_eth_dev_info_get(port, &dev_info); + + if (strstr(dev_info.driver_name, "ixgbe_vf")) + return -ENOTSUP; + + if ((vlan > ETHER_MAX_VLAN_ID) || (vf_mask == 0)) + return -EINVAL; + + hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + if (ixgbe_vmdq_mode_check(hw) < 0) + return -ENOTSUP; + + for (vf_idx = 0; vf_idx < 64; vf_idx++) { + if (vf_mask & ((uint64_t)(1ULL << vf_idx))) { + ret = hw->mac.ops.set_vfta(hw, vlan, vf_idx, + vlan_on, false); + if (ret < 0) + return ret; + } + } + + return ret; +} + +int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, + uint16_t tx_rate, uint64_t q_msk) +{ + struct rte_eth_dev *dev; + struct rte_eth_dev_info dev_info; + struct ixgbe_hw *hw; + struct ixgbe_vf_info *vfinfo; + struct rte_eth_link link; + uint8_t nb_q_per_pool; + uint32_t queue_stride; + uint32_t queue_idx, idx = 0, vf_idx; + uint32_t queue_end; + uint16_t total_rate = 0; + struct rte_pci_device *pci_dev; + + RTE_ETH_VALID_PORTID_OR_ERR_RET(port, -ENODEV); + + dev = &rte_eth_devices[port]; + rte_eth_dev_info_get(port, &dev_info); + rte_eth_link_get_nowait(port, &link); + + if (strstr(dev_info.driver_name, "ixgbe_vf")) + return -ENOTSUP; + + if (vf >= dev_info.max_vfs) + return -EINVAL; + + if (tx_rate > link.link_speed) + return -EINVAL; + + if (q_msk == 0) + return 0; + + pci_dev = IXGBE_DEV_TO_PCI(dev); + hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + vfinfo = *(IXGBE_DEV_PRIVATE_TO_P_VFDATA(dev->data->dev_private)); + nb_q_per_pool = RTE_ETH_DEV_SRIOV(dev).nb_q_per_pool; + queue_stride = IXGBE_MAX_RX_QUEUE_NUM / RTE_ETH_DEV_SRIOV(dev).active; + queue_idx = vf * queue_stride; + queue_end = queue_idx + nb_q_per_pool - 1; + if (queue_end >= hw->mac.max_tx_queues) + return -EINVAL; + + if (vfinfo) { + for (vf_idx = 0; vf_idx < pci_dev->max_vfs; vf_idx++) { + if (vf_idx == vf) + continue; + for (idx = 0; idx < RTE_DIM(vfinfo[vf_idx].tx_rate); + idx++) + total_rate += vfinfo[vf_idx].tx_rate[idx]; + } + } else { + return -EINVAL; + } + + /* Store tx_rate for this vf. */ + for (idx = 0; idx < nb_q_per_pool; idx++) { + if (((uint64_t)0x1 << idx) & q_msk) { + if (vfinfo[vf].tx_rate[idx] != tx_rate) + vfinfo[vf].tx_rate[idx] = tx_rate; + total_rate += tx_rate; + } + } + + if (total_rate > dev->data->dev_link.link_speed) { + /* Reset stored TX rate of the VF if it causes exceed + * link speed. + */ + memset(vfinfo[vf].tx_rate, 0, sizeof(vfinfo[vf].tx_rate)); + return -EINVAL; + } + + /* Set RTTBCNRC of each queue/pool for vf X */ + for (; queue_idx <= queue_end; queue_idx++) { + if (0x1 & q_msk) + ixgbe_set_queue_rate_limit(dev, queue_idx, tx_rate); + q_msk = q_msk >> 1; + } + + return 0; +} + #define IXGBE_MRCTL_VPME 0x01 /* Virtual Pool Mirroring. */ #define IXGBE_MRCTL_UPME 0x02 /* Uplink Port Mirroring. */ #define IXGBE_MRCTL_DPME 0x04 /* Downlink Port Mirroring. */ diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe.h b/drivers/net/ixgbe/rte_pmd_ixgbe.h index 22bc4c73e5..dade57ae9f 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe.h +++ b/drivers/net/ixgbe/rte_pmd_ixgbe.h @@ -282,6 +282,110 @@ int rte_pmd_ixgbe_macsec_select_txsa(uint8_t port, uint8_t idx, uint8_t an, int rte_pmd_ixgbe_macsec_select_rxsa(uint8_t port, uint8_t idx, uint8_t an, uint32_t pn, uint8_t *key); +/** +* Set RX L2 Filtering mode of a VF of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param rx_mode +* The RX mode mask, which is one or more of accepting Untagged Packets, +* packets that match the PFUTA table, Broadcast and Multicast Promiscuous. +* ETH_VMDQ_ACCEPT_UNTAG,ETH_VMDQ_ACCEPT_HASH_UC, +* ETH_VMDQ_ACCEPT_BROADCAST and ETH_VMDQ_ACCEPT_MULTICAST will be used +* in rx_mode. +* @param on +* 1 - Enable a VF RX mode. +* 0 - Disable a VF RX mode. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rxmode(uint8_t port, uint16_t vf, uint16_t rx_mask, uint8_t on); + +/** +* Enable or disable a VF traffic receive of an Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic receive. +* 0 - Disable a VF traffic receive. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_rx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable or disable a VF traffic transmit of the Ethernet device. +* +* @param port +* The port identifier of the Ethernet device. +* @param vf +* VF id. +* @param on +* 1 - Enable a VF traffic transmit. +* 0 - Disable a VF traffic transmit. +* @return +* - (0) if successful. +* - (-ENODEV) if *port_id* invalid. +* - (-ENOTSUP) if hardware doesn't support. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_tx(uint8_t port, uint16_t vf, uint8_t on); + +/** +* Enable/Disable hardware VF VLAN filtering by an Ethernet device of +* received VLAN packets tagged with a given VLAN Tag Identifier. +* +* @param port id +* The port identifier of the Ethernet device. +* @param vlan_id +* The VLAN Tag Identifier whose filtering must be enabled or disabled. +* @param vf_mask +* Bitmap listing which VFs participate in the VLAN filtering. +* @param vlan_on +* 1 - Enable VFs VLAN filtering. +* 0 - Disable VFs VLAN filtering. +* @return +* - (0) if successful. +* - (-ENOTSUP) if hardware doesn't support. +* - (-ENODEV) if *port_id* invalid. +* - (-EINVAL) if bad parameter. +*/ +int +rte_pmd_ixgbe_set_vf_vlan_filter(uint8_t port, uint16_t vlan, uint64_t vf_mask, uint8_t vlan_on); + +/** + * Set the rate limitation for a vf on an Ethernet device. + * + * @param port_id + * The port identifier of the Ethernet device. + * @param vf + * VF id. + * @param tx_rate + * The tx rate allocated from the total link speed for this VF id. + * @param q_msk + * The queue mask which need to set the rate. + * @return + * - (0) if successful. + * - (-ENOTSUP) if hardware doesn't support this feature. + * - (-ENODEV) if *port_id* invalid. + * - (-EINVAL) if bad parameter. + */ +int rte_pmd_ixgbe_set_vf_rate_limit(uint8_t port, uint16_t vf, uint16_t tx_rate, uint64_t q_msk); + /** * Response sent back to ixgbe driver from user app after callback */ diff --git a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map index 6d68934b6b..a992dfd37a 100644 --- a/drivers/net/ixgbe/rte_pmd_ixgbe_version.map +++ b/drivers/net/ixgbe/rte_pmd_ixgbe_version.map @@ -19,10 +19,15 @@ DPDK_16.11 { DPDK_17.02 { global: - rte_pmd_ixgbe_macsec_enable; - rte_pmd_ixgbe_macsec_disable; - rte_pmd_ixgbe_macsec_config_txsc; rte_pmd_ixgbe_macsec_config_rxsc; - rte_pmd_ixgbe_macsec_select_txsa; + rte_pmd_ixgbe_macsec_config_txsc; + rte_pmd_ixgbe_macsec_disable; + rte_pmd_ixgbe_macsec_enable; rte_pmd_ixgbe_macsec_select_rxsa; + rte_pmd_ixgbe_macsec_select_txsa; + rte_pmd_ixgbe_set_vf_rate_limit; + rte_pmd_ixgbe_set_vf_rx; + rte_pmd_ixgbe_set_vf_rxmode; + rte_pmd_ixgbe_set_vf_tx; + rte_pmd_ixgbe_set_vf_vlan_filter; } DPDK_16.11;