From: Hemant Agrawal Date: Fri, 26 May 2017 06:51:11 +0000 (+0530) Subject: net/dpaa2: support parallel Rx X-Git-Tag: spdx-start~3135 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=5c6942fdb9270b26d353fff9c99fe9a0ad46229b;p=dpdk.git net/dpaa2: support parallel Rx Typically when the PMD issues a Rx command to DPAA2 hardware, the HW writes the available descriptors into the given memory. The RX function then processes the frames and prepare them as mbufs. This patch adds support to issue another pull request to hardware in another memory location, before we start processing the output of the first request. This help in controlling the CPU cycles wasted during the wait for the hardware to write the descriptors. Signed-off-by: Hemant Agrawal --- diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c index 698fb8455c..797e71d3dc 100644 --- a/drivers/net/dpaa2/dpaa2_ethdev.c +++ b/drivers/net/dpaa2/dpaa2_ethdev.c @@ -391,7 +391,7 @@ dpaa2_supported_ptypes_get(struct rte_eth_dev *dev) RTE_PTYPE_UNKNOWN }; - if (dev->rx_pkt_burst == dpaa2_dev_rx) + if (dev->rx_pkt_burst == dpaa2_dev_prefetch_rx) return ptypes; return NULL; } @@ -886,7 +886,7 @@ dpaa2_dev_init(struct rte_eth_dev *eth_dev) eth_dev->dev_ops = &dpaa2_ethdev_ops; eth_dev->data->drv_name = rte_dpaa2_pmd.driver.name; - eth_dev->rx_pkt_burst = dpaa2_dev_rx; + eth_dev->rx_pkt_burst = dpaa2_dev_prefetch_rx; eth_dev->tx_pkt_burst = dpaa2_dev_tx; rte_fslmc_vfio_dmamap(); diff --git a/drivers/net/dpaa2/dpaa2_ethdev.h b/drivers/net/dpaa2/dpaa2_ethdev.h index 7196398f86..7fa7e7d63c 100644 --- a/drivers/net/dpaa2/dpaa2_ethdev.h +++ b/drivers/net/dpaa2/dpaa2_ethdev.h @@ -77,7 +77,8 @@ int dpaa2_remove_flow_dist(struct rte_eth_dev *eth_dev, int dpaa2_attach_bp_list(struct dpaa2_dev_priv *priv, void *blist); -uint16_t dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts); +uint16_t dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, + uint16_t nb_pkts); uint16_t dpaa2_dev_tx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts); #endif /* _DPAA2_ETHDEV_H */ diff --git a/drivers/net/dpaa2/dpaa2_rxtx.c b/drivers/net/dpaa2/dpaa2_rxtx.c index ff9a696e0f..8476972546 100644 --- a/drivers/net/dpaa2/dpaa2_rxtx.c +++ b/drivers/net/dpaa2/dpaa2_rxtx.c @@ -242,17 +242,18 @@ eth_copy_mbuf_to_fd(struct rte_mbuf *mbuf, } uint16_t -dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts) +dpaa2_dev_prefetch_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts) { - /* Function is responsible to receive frames for a given device and VQ*/ + /* Function receive frames for a given device and VQ*/ struct dpaa2_queue *dpaa2_q = (struct dpaa2_queue *)queue; struct qbman_result *dq_storage; uint32_t fqid = dpaa2_q->fqid; int ret, num_rx = 0; uint8_t is_last = 0, status; struct qbman_swp *swp; - const struct qbman_fd *fd; + const struct qbman_fd *fd[DPAA2_DQRR_RING_SIZE]; struct qbman_pull_desc pulldesc; + struct queue_storage_info_t *q_storage = dpaa2_q->q_storage; struct rte_eth_dev *dev = dpaa2_q->dev; if (unlikely(!DPAA2_PER_LCORE_DPIO)) { @@ -263,44 +264,51 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts) } } swp = DPAA2_PER_LCORE_PORTAL; - dq_storage = dpaa2_q->q_storage->dq_storage[0]; - - qbman_pull_desc_clear(&pulldesc); - qbman_pull_desc_set_numframes(&pulldesc, - (nb_pkts > DPAA2_DQRR_RING_SIZE) ? - DPAA2_DQRR_RING_SIZE : nb_pkts); - qbman_pull_desc_set_fq(&pulldesc, fqid); - /* todo optimization - we can have dq_storage_phys available*/ - qbman_pull_desc_set_storage(&pulldesc, dq_storage, + if (!q_storage->active_dqs) { + q_storage->toggle = 0; + dq_storage = q_storage->dq_storage[q_storage->toggle]; + qbman_pull_desc_clear(&pulldesc); + qbman_pull_desc_set_numframes(&pulldesc, + (nb_pkts > DPAA2_DQRR_RING_SIZE) ? + DPAA2_DQRR_RING_SIZE : nb_pkts); + qbman_pull_desc_set_fq(&pulldesc, fqid); + qbman_pull_desc_set_storage(&pulldesc, dq_storage, (dma_addr_t)(DPAA2_VADDR_TO_IOVA(dq_storage)), 1); - - /*Issue a volatile dequeue command. */ - while (1) { - if (qbman_swp_pull(swp, &pulldesc)) { - PMD_RX_LOG(ERR, "VDQ command is not issued." - "QBMAN is busy\n"); - /* Portal was busy, try again */ - continue; + if (check_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)) { + while (!qbman_check_command_complete(swp, + get_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index))) + ; + clear_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index); } - break; - }; - - /* Receive the packets till Last Dequeue entry is found with - * respect to the above issues PULL command. + while (1) { + if (qbman_swp_pull(swp, &pulldesc)) { + PMD_RX_LOG(WARNING, "VDQ command is not issued." + "QBMAN is busy\n"); + /* Portal was busy, try again */ + continue; + } + break; + } + q_storage->active_dqs = dq_storage; + q_storage->active_dpio_id = DPAA2_PER_LCORE_DPIO->index; + set_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index, dq_storage); + } + dq_storage = q_storage->active_dqs; + /* Check if the previous issued command is completed. + * Also seems like the SWP is shared between the Ethernet Driver + * and the SEC driver. */ + while (!qbman_check_command_complete(swp, dq_storage)) + ; + if (dq_storage == get_swp_active_dqs(q_storage->active_dpio_id)) + clear_swp_active_dqs(q_storage->active_dpio_id); while (!is_last) { - struct rte_mbuf *mbuf; - /*Check if the previous issued command is completed. - * Also seems like the SWP is shared between the - * Ethernet Driver and the SEC driver. - */ - while (!qbman_check_command_complete(swp, dq_storage)) - ; /* Loop until the dq_storage is updated with * new token by QBMAN */ while (!qbman_result_has_new_result(swp, dq_storage)) ; + rte_prefetch0((void *)((uint64_t)(dq_storage + 1))); /* Check whether Last Pull command is Expired and * setting Condition for Loop termination */ @@ -311,27 +319,50 @@ dpaa2_dev_rx(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts) if (unlikely((status & QBMAN_DQ_STAT_VALIDFRAME) == 0)) continue; } + fd[num_rx] = qbman_result_DQ_fd(dq_storage); - fd = qbman_result_DQ_fd(dq_storage); - mbuf = (struct rte_mbuf *)DPAA2_IOVA_TO_VADDR( - DPAA2_GET_FD_ADDR(fd) - - rte_dpaa2_bpid_info[DPAA2_GET_FD_BPID(fd)].meta_data_size); - /* Prefeth mbuf */ - rte_prefetch0(mbuf); /* Prefetch Annotation address for the parse results */ - rte_prefetch0((void *)((uint64_t)DPAA2_GET_FD_ADDR(fd) - + DPAA2_FD_PTA_SIZE + 16)); + rte_prefetch0((void *)((uint64_t)DPAA2_GET_FD_ADDR(fd[num_rx]) + + DPAA2_FD_PTA_SIZE + 16)); - bufs[num_rx] = eth_fd_to_mbuf(fd); + bufs[num_rx] = eth_fd_to_mbuf(fd[num_rx]); bufs[num_rx]->port = dev->data->port_id; + if (dev->data->dev_conf.rxmode.hw_vlan_strip) + rte_vlan_strip(bufs[num_rx]); - num_rx++; dq_storage++; - } /* End of Packet Rx loop */ + num_rx++; + } + + if (check_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index)) { + while (!qbman_check_command_complete(swp, + get_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index))) + ; + clear_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index); + } + q_storage->toggle ^= 1; + dq_storage = q_storage->dq_storage[q_storage->toggle]; + qbman_pull_desc_clear(&pulldesc); + qbman_pull_desc_set_numframes(&pulldesc, DPAA2_DQRR_RING_SIZE); + qbman_pull_desc_set_fq(&pulldesc, fqid); + qbman_pull_desc_set_storage(&pulldesc, dq_storage, + (dma_addr_t)(DPAA2_VADDR_TO_IOVA(dq_storage)), 1); + /* Issue a volatile dequeue command. */ + while (1) { + if (qbman_swp_pull(swp, &pulldesc)) { + PMD_RX_LOG(WARNING, "VDQ command is not issued." + "QBMAN is busy\n"); + continue; + } + break; + } + q_storage->active_dqs = dq_storage; + q_storage->active_dpio_id = DPAA2_PER_LCORE_DPIO->index; + set_swp_active_dqs(DPAA2_PER_LCORE_DPIO->index, dq_storage); dpaa2_q->rx_pkts += num_rx; - /*Return the total number of packets received to DPAA2 app*/ + /* Return the total number of packets received to DPAA2 app */ return num_rx; }