From: Yuanhan Liu Date: Fri, 6 May 2016 21:26:03 +0000 (+0800) Subject: vhost: add vhost-user client mode X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=64ab701c3d1e;p=dpdk.git vhost: add vhost-user client mode Add a new paramter (flags) to rte_vhost_driver_register(). DPDK vhost-user acts as client mode when RTE_VHOST_USER_CLIENT flag is set. The flags would also allow future extensions without breaking the API (again). The rest is straingfoward then: allocate a unix socket, and bind/listen for server, connect for client. This extension is for vhost-user only, therefore we simply quit and report error when any flags are given for vhost-cuse. Signed-off-by: Yuanhan Liu --- diff --git a/doc/guides/rel_notes/release_16_07.rst b/doc/guides/rel_notes/release_16_07.rst index 6d4d2781c2..1fab04f43a 100644 --- a/doc/guides/rel_notes/release_16_07.rst +++ b/doc/guides/rel_notes/release_16_07.rst @@ -51,6 +51,18 @@ New Features The ioports are mapped in memory when using Linux UIO. +* **Added vhost-user client mode.** + + DPDK vhost-user could be the server as well as the client. It supports + server mode only before, now it also supports client mode. Client mode + is enabled when ``RTE_VHOST_USER_CLIENT`` flag is set while calling + ``rte_vhost_driver_register``. + + When DPDK vhost-user restarts from normal or abnormal quit (say crash), + the client mode would allow DPDK to establish the connect again. Note + that a brand new QEMU version (v2.7 or above) is needed, otherwise, the + reconnect won't work. + * **Added AES-CTR support to AESNI MB PMD.** Now AESNI MB PMD supports 128/192/256-bit counter mode AES encryption and diff --git a/drivers/net/vhost/rte_eth_vhost.c b/drivers/net/vhost/rte_eth_vhost.c index 395b892a2d..2b238c8827 100644 --- a/drivers/net/vhost/rte_eth_vhost.c +++ b/drivers/net/vhost/rte_eth_vhost.c @@ -467,7 +467,7 @@ eth_dev_start(struct rte_eth_dev *dev) int ret = 0; if (rte_atomic16_cmpset(&internal->once, 0, 1)) { - ret = rte_vhost_driver_register(internal->iface_name); + ret = rte_vhost_driver_register(internal->iface_name, 0); if (ret) return ret; } diff --git a/examples/tep_termination/main.c b/examples/tep_termination/main.c index ec57869cac..622f248a50 100644 --- a/examples/tep_termination/main.c +++ b/examples/tep_termination/main.c @@ -1254,7 +1254,7 @@ main(int argc, char *argv[]) rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF); /* Register CUSE device to handle IOCTLs. */ - ret = rte_vhost_driver_register((char *)&dev_basename); + ret = rte_vhost_driver_register((char *)&dev_basename, 0); if (ret != 0) rte_exit(EXIT_FAILURE, "CUSE device setup failure.\n"); diff --git a/examples/vhost/main.c b/examples/vhost/main.c index b95d789cab..0595e6369d 100644 --- a/examples/vhost/main.c +++ b/examples/vhost/main.c @@ -1488,7 +1488,7 @@ main(int argc, char *argv[]) rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF); /* Register vhost(cuse or user) driver to handle vhost messages. */ - ret = rte_vhost_driver_register((char *)&dev_basename); + ret = rte_vhost_driver_register(dev_basename, 0); if (ret != 0) rte_exit(EXIT_FAILURE, "vhost driver register failure.\n"); diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h index bc2b74b239..5f69e78d53 100644 --- a/lib/librte_vhost/rte_virtio_net.h +++ b/lib/librte_vhost/rte_virtio_net.h @@ -51,6 +51,8 @@ #include #include +#define RTE_VHOST_USER_CLIENT (1ULL << 0) + /* Enum for virtqueue management. */ enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM}; @@ -85,11 +87,14 @@ uint64_t rte_vhost_feature_get(void); int rte_vhost_enable_guest_notification(int vid, uint16_t queue_id, int enable); -/* Register vhost driver. dev_name could be different for multiple instance support. */ -int rte_vhost_driver_register(const char *dev_name); +/** + * Register vhost driver. path could be different for multiple + * instance support. + */ +int rte_vhost_driver_register(const char *path, uint64_t flags); /* Unregister vhost driver. This is only meaningful to vhost user. */ -int rte_vhost_driver_unregister(const char *dev_name); +int rte_vhost_driver_unregister(const char *path); /* Register callbacks. */ int rte_vhost_driver_callback_register(struct virtio_net_device_ops const * const); diff --git a/lib/librte_vhost/vhost_cuse/vhost-net-cdev.c b/lib/librte_vhost/vhost_cuse/vhost-net-cdev.c index cf6d191685..5d1501161b 100644 --- a/lib/librte_vhost/vhost_cuse/vhost-net-cdev.c +++ b/lib/librte_vhost/vhost_cuse/vhost-net-cdev.c @@ -352,7 +352,7 @@ static const struct cuse_lowlevel_ops vhost_net_ops = { * vhost_net_device_ops are also passed when the device is registered in app. */ int -rte_vhost_driver_register(const char *dev_name) +rte_vhost_driver_register(const char *dev_name, uint64_t flags) { struct cuse_info cuse_info; char device_name[PATH_MAX] = ""; @@ -364,6 +364,12 @@ rte_vhost_driver_register(const char *dev_name) char fuse_opt_nomulti[] = FUSE_OPT_NOMULTI; char *fuse_argv[] = {fuse_opt_dummy, fuse_opt_fore, fuse_opt_nomulti}; + if (flags) { + RTE_LOG(ERR, VHOST_CONFIG, + "vhost-cuse does not support any flags so far\n"); + return -1; + } + if (access(cuse_device_name, R_OK | W_OK) < 0) { RTE_LOG(ERR, VHOST_CONFIG, "char device %s can't be accessed, maybe not exist\n", diff --git a/lib/librte_vhost/vhost_user/vhost-net-user.c b/lib/librte_vhost/vhost_user/vhost-net-user.c index f485a3bd7c..a480f9f672 100644 --- a/lib/librte_vhost/vhost_user/vhost-net-user.c +++ b/lib/librte_vhost/vhost_user/vhost-net-user.c @@ -33,6 +33,7 @@ #include #include +#include #include #include #include @@ -58,6 +59,7 @@ struct vhost_user_socket { char *path; int listenfd; + bool is_server; }; struct vhost_user_connection { @@ -75,7 +77,7 @@ struct vhost_user { #define MAX_VIRTIO_BACKLOG 128 -static void vhost_user_new_connection(int fd, void *data, int *remove); +static void vhost_user_server_new_connection(int fd, void *data, int *remove); static void vhost_user_msg_handler(int fd, void *dat, int *remove); static struct vhost_user vhost_user = { @@ -111,48 +113,6 @@ static const char *vhost_message_str[VHOST_USER_MAX] = { [VHOST_USER_SEND_RARP] = "VHOST_USER_SEND_RARP", }; -/** - * Create a unix domain socket, bind to path and listen for connection. - * @return - * socket fd or -1 on failure - */ -static int -uds_socket(const char *path) -{ - struct sockaddr_un un; - int sockfd; - int ret; - - if (path == NULL) - return -1; - - sockfd = socket(AF_UNIX, SOCK_STREAM, 0); - if (sockfd < 0) - return -1; - RTE_LOG(INFO, VHOST_CONFIG, "socket created, fd:%d\n", sockfd); - - memset(&un, 0, sizeof(un)); - un.sun_family = AF_UNIX; - snprintf(un.sun_path, sizeof(un.sun_path), "%s", path); - ret = bind(sockfd, (struct sockaddr *)&un, sizeof(un)); - if (ret == -1) { - RTE_LOG(ERR, VHOST_CONFIG, "fail to bind fd:%d, remove file:%s and try again.\n", - sockfd, path); - goto err; - } - RTE_LOG(INFO, VHOST_CONFIG, "bind to %s\n", path); - - ret = listen(sockfd, MAX_VIRTIO_BACKLOG); - if (ret == -1) - goto err; - - return sockfd; - -err: - close(sockfd); - return -1; -} - /* return bytes# of read on success or negative val on failure. */ static int read_fd_message(int sockfd, char *buf, int buflen, int *fds, int fd_num) @@ -287,32 +247,24 @@ send_vhost_message(int sockfd, struct VhostUserMsg *msg) return ret; } -/* call back when there is new vhost-user connection. */ + static void -vhost_user_new_connection(int fd, void *dat, int *remove __rte_unused) +vhost_user_add_connection(int fd, struct vhost_user_socket *vsocket) { - struct vhost_user_socket *vsocket = dat; - int conn_fd; - struct vhost_user_connection *conn; int vid; - unsigned int size; - - conn_fd = accept(fd, NULL, NULL); - RTE_LOG(INFO, VHOST_CONFIG, - "new virtio connection is %d\n", conn_fd); - if (conn_fd < 0) - return; + size_t size; + struct vhost_user_connection *conn; - conn = calloc(1, sizeof(*conn)); + conn = malloc(sizeof(*conn)); if (conn == NULL) { - close(conn_fd); + close(fd); return; } vid = vhost_new_device(); if (vid == -1) { + close(fd); free(conn); - close(conn_fd); return; } @@ -323,8 +275,21 @@ vhost_user_new_connection(int fd, void *dat, int *remove __rte_unused) conn->vsocket = vsocket; conn->vid = vid; - fdset_add(&vhost_user.fdset, - conn_fd, vhost_user_msg_handler, NULL, conn); + fdset_add(&vhost_user.fdset, fd, vhost_user_msg_handler, NULL, conn); +} + +/* call back when there is new vhost-user connection from client */ +static void +vhost_user_server_new_connection(int fd, void *dat, int *remove __rte_unused) +{ + struct vhost_user_socket *vsocket = dat; + + fd = accept(fd, NULL, NULL); + if (fd < 0) + return; + + RTE_LOG(INFO, VHOST_CONFIG, "new vhost user connection is %d\n", fd); + vhost_user_add_connection(fd, vsocket); } /* callback when there is message on the connfd */ @@ -452,50 +417,135 @@ vhost_user_msg_handler(int connfd, void *dat, int *remove) } } -/** - * Creates and initialise the vhost server. - */ -int -rte_vhost_driver_register(const char *path) +static int +create_unix_socket(const char *path, struct sockaddr_un *un, bool is_server) { - struct vhost_user_socket *vsocket; + int fd; - pthread_mutex_lock(&vhost_user.mutex); + fd = socket(AF_UNIX, SOCK_STREAM, 0); + if (fd < 0) + return -1; + RTE_LOG(INFO, VHOST_CONFIG, "vhost-user %s: socket created, fd: %d\n", + is_server ? "server" : "client", fd); - if (vhost_user.vsocket_cnt == MAX_VHOST_SOCKET) { - RTE_LOG(ERR, VHOST_CONFIG, - "error: the number of servers reaches maximum\n"); - pthread_mutex_unlock(&vhost_user.mutex); + memset(un, 0, sizeof(*un)); + un->sun_family = AF_UNIX; + strncpy(un->sun_path, path, sizeof(un->sun_path)); + + return fd; +} + +static int +vhost_user_create_server(struct vhost_user_socket *vsocket) +{ + int fd; + int ret; + struct sockaddr_un un; + const char *path = vsocket->path; + + fd = create_unix_socket(path, &un, vsocket->is_server); + if (fd < 0) return -1; + + ret = bind(fd, (struct sockaddr *)&un, sizeof(un)); + if (ret < 0) { + RTE_LOG(ERR, VHOST_CONFIG, + "failed to bind to %s: %s; remove it and try again\n", + path, strerror(errno)); + goto err; } + RTE_LOG(INFO, VHOST_CONFIG, "bind to %s\n", path); - vsocket = calloc(sizeof(struct vhost_user_socket), 1); - if (vsocket == NULL) { - pthread_mutex_unlock(&vhost_user.mutex); + ret = listen(fd, MAX_VIRTIO_BACKLOG); + if (ret < 0) + goto err; + + vsocket->listenfd = fd; + fdset_add(&vhost_user.fdset, fd, vhost_user_server_new_connection, + NULL, vsocket); + + return 0; + +err: + close(fd); + return -1; +} + +static int +vhost_user_create_client(struct vhost_user_socket *vsocket) +{ + int fd; + int ret; + struct sockaddr_un un; + const char *path = vsocket->path; + + fd = create_unix_socket(path, &un, vsocket->is_server); + if (fd < 0) + return -1; + + ret = connect(fd, (struct sockaddr *)&un, sizeof(un)); + if (ret < 0) { + RTE_LOG(ERR, VHOST_CONFIG, "failed to connect to %s: %s\n", + path, strerror(errno)); + close(fd); return -1; } - vsocket->listenfd = uds_socket(path); - if (vsocket->listenfd < 0) { - free(vsocket); - pthread_mutex_unlock(&vhost_user.mutex); + vhost_user_add_connection(fd, vsocket); + + return 0; +} + +/* + * Register a new vhost-user socket; here we could act as server + * (the default case), or client (when RTE_VHOST_USER_CLIENT) flag + * is set. + */ +int +rte_vhost_driver_register(const char *path, uint64_t flags) +{ + int ret = -1; + struct vhost_user_socket *vsocket; + + if (!path) return -1; + + pthread_mutex_lock(&vhost_user.mutex); + + if (vhost_user.vsocket_cnt == MAX_VHOST_SOCKET) { + RTE_LOG(ERR, VHOST_CONFIG, + "error: the number of vhost sockets reaches maximum\n"); + goto out; } + vsocket = malloc(sizeof(struct vhost_user_socket)); + if (!vsocket) + goto out; + memset(vsocket, 0, sizeof(struct vhost_user_socket)); vsocket->path = strdup(path); - fdset_add(&vhost_user.fdset, vsocket->listenfd, - vhost_user_new_connection, NULL, vsocket); + if ((flags & RTE_VHOST_USER_CLIENT) != 0) { + ret = vhost_user_create_client(vsocket); + } else { + vsocket->is_server = true; + ret = vhost_user_create_server(vsocket); + } + if (ret < 0) { + free(vsocket->path); + free(vsocket); + goto out; + } vhost_user.vsockets[vhost_user.vsocket_cnt++] = vsocket; + +out: pthread_mutex_unlock(&vhost_user.mutex); - return 0; + return ret; } - /** - * Unregister the specified vhost server + * Unregister the specified vhost socket */ int rte_vhost_driver_unregister(const char *path) @@ -507,15 +557,16 @@ rte_vhost_driver_unregister(const char *path) for (i = 0; i < vhost_user.vsocket_cnt; i++) { if (!strcmp(vhost_user.vsockets[i]->path, path)) { - fdset_del(&vhost_user.fdset, - vhost_user.vsockets[i]->listenfd); + if (vhost_user.vsockets[i]->is_server) { + fdset_del(&vhost_user.fdset, + vhost_user.vsockets[i]->listenfd); + close(vhost_user.vsockets[i]->listenfd); + unlink(path); + } - close(vhost_user.vsockets[i]->listenfd); free(vhost_user.vsockets[i]->path); free(vhost_user.vsockets[i]); - unlink(path); - count = --vhost_user.vsocket_cnt; vhost_user.vsockets[i] = vhost_user.vsockets[count]; vhost_user.vsockets[count] = NULL;