From: Ajit Khaparde Date: Tue, 17 Apr 2018 01:11:20 +0000 (-0700) Subject: net/bnxt: add code to determine the Tx COS queue X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=698aa7e9532538ec5d6329679b3f71918e3e7585;p=dpdk.git net/bnxt: add code to determine the Tx COS queue The hwrm_queue_qportcfg command has been extended to determine the COS queue that a Tx ring needs to use. This patch adds code to determine the information from the FW and use it while creating the Tx rings. Signed-off-by: Ajit Khaparde --- diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h index 2e99878ef6..d3eab8d364 100644 --- a/drivers/net/bnxt/bnxt.h +++ b/drivers/net/bnxt/bnxt.h @@ -272,6 +272,7 @@ struct bnxt { struct bnxt_link_info link_info; struct bnxt_cos_queue_info cos_queue[BNXT_COS_QUEUE_COUNT]; + uint8_t tx_cosq_id; uint16_t fw_fid; uint8_t dflt_mac_addr[ETHER_ADDR_LEN]; @@ -293,6 +294,7 @@ struct bnxt { uint16_t vxlan_fw_dst_port_id; uint16_t geneve_fw_dst_port_id; uint32_t fw_ver; + uint32_t hwrm_spec_code; rte_atomic64_t rx_mbuf_alloc_fail; struct bnxt_led_info leds[BNXT_MAX_LED]; diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c index 0100f7473b..3a326d4f5c 100644 --- a/drivers/net/bnxt/bnxt_hwrm.c +++ b/drivers/net/bnxt/bnxt_hwrm.c @@ -27,6 +27,7 @@ #include #define HWRM_CMD_TIMEOUT 10000 +#define HWRM_VERSION_1_9_1 0x10901 struct bnxt_plcmodes_cfg { uint32_t flags; @@ -665,6 +666,7 @@ int bnxt_hwrm_ver_get(struct bnxt *bp) fw_version = resp->hwrm_intf_maj << 16; fw_version |= resp->hwrm_intf_min << 8; fw_version |= resp->hwrm_intf_upd; + bp->hwrm_spec_code = fw_version; if (resp->hwrm_intf_maj != HWRM_VERSION_MAJOR) { PMD_DRV_LOG(ERR, "Unsupported firmware API version\n"); @@ -891,9 +893,15 @@ int bnxt_hwrm_queue_qportcfg(struct bnxt *bp) int rc = 0; struct hwrm_queue_qportcfg_input req = {.req_type = 0 }; struct hwrm_queue_qportcfg_output *resp = bp->hwrm_cmd_resp_addr; + int i; HWRM_PREP(req, QUEUE_QPORTCFG); + req.flags = HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX; + /* HWRM Version >= 1.9.1 */ + if (bp->hwrm_spec_code >= HWRM_VERSION_1_9_1) + req.drv_qmap_cap = + HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED; rc = bnxt_hwrm_send_message(bp, &req, sizeof(req)); HWRM_CHECK_RESULT(); @@ -913,6 +921,20 @@ int bnxt_hwrm_queue_qportcfg(struct bnxt *bp) HWRM_UNLOCK(); + if (bp->hwrm_spec_code < HWRM_VERSION_1_9_1) { + bp->tx_cosq_id = bp->cos_queue[0].id; + } else { + /* iterate and find the COSq profile to use for Tx */ + for (i = 0; i < BNXT_COS_QUEUE_COUNT; i++) { + if (bp->cos_queue[i].profile == + HWRM_QUEUE_SERVICE_PROFILE_LOSSY) { + bp->tx_cosq_id = bp->cos_queue[i].id; + break; + } + } + } + PMD_DRV_LOG(DEBUG, "Tx Cos Queue to use: %d\n", bp->tx_cosq_id); + return rc; } @@ -936,7 +958,7 @@ int bnxt_hwrm_ring_alloc(struct bnxt *bp, switch (ring_type) { case HWRM_RING_ALLOC_INPUT_RING_TYPE_TX: - req.queue_id = bp->cos_queue[0].id; + req.queue_id = rte_cpu_to_le_16(bp->tx_cosq_id); /* FALLTHROUGH */ case HWRM_RING_ALLOC_INPUT_RING_TYPE_RX: req.ring_type = ring_type; diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h index 629243477b..7c161eea04 100644 --- a/drivers/net/bnxt/bnxt_hwrm.h +++ b/drivers/net/bnxt/bnxt_hwrm.h @@ -26,6 +26,9 @@ struct bnxt_cp_ring_info; #define ASYNC_CMPL_EVENT_ID_VF_CFG_CHANGE \ (1 << (HWRM_ASYNC_EVENT_CMPL_EVENT_ID_VF_CFG_CHANGE - 32)) +#define HWRM_QUEUE_SERVICE_PROFILE_LOSSY \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY + int bnxt_hwrm_cfa_l2_clear_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic); int bnxt_hwrm_cfa_l2_set_rx_mask(struct bnxt *bp, struct bnxt_vnic_info *vnic, diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index bcdacae819..79705a7daa 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -6759,339 +6759,453 @@ struct hwrm_port_led_qcaps_output { * configured. */ /* Input (24 bytes) */ +/* hwrm_queue_qportcfg_input (size:192b/24B) */ struct hwrm_queue_qportcfg_input { - uint16_t req_type; + /* The HWRM command request type. */ + uint16_t req_type; /* - * This value indicates what type of request this is. The format - * for the rest of the command is determined by this field. + * The completion ring to send the completion event on. This should + * be the NQ ID returned from the `nq_alloc` HWRM command. */ - uint16_t cmpl_ring; + uint16_t cmpl_ring; /* - * This value indicates the what completion ring the request - * will be optionally completed on. If the value is -1, then no - * CR completion will be generated. Any other value must be a - * valid CR ring_id value for this function. + * The sequence ID is used by the driver for tracking multiple + * commands. This ID is treated as opaque data by the firmware and + * the value is returned in the `hwrm_resp_hdr` upon completion. */ - uint16_t seq_id; - /* This value indicates the command sequence number. */ - uint16_t target_id; + uint16_t seq_id; /* - * Target ID of this command. 0x0 - 0xFFF8 - Used for function - * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF - * - HWRM + * The target ID of the command: + * * 0x0-0xFFF8 - The function ID + * * 0xFFF8-0xFFFE - Reserved for internal processors + * * 0xFFFF - HWRM */ - uint64_t resp_addr; + uint16_t target_id; /* - * This is the host address where the response will be written - * when the request is complete. This area must be 16B aligned - * and must be cleared to zero before the request is made. + * A physical address pointer pointing to a host buffer that the + * command's response data will be written. This can be either a host + * physical address (HPA) or a guest physical address (GPA) and must + * point to a physically contiguous block of memory. */ - uint32_t flags; + uint64_t resp_addr; + uint32_t flags; /* - * Enumeration denoting the RX, TX type of the resource. This - * enumeration is used for resources that are similar for both + * Enumeration denoting the RX, TX type of the resource. + * This enumeration is used for resources that are similar for both * TX and RX paths of the chip. */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH UINT32_C(0x1) /* tx path */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_TX UINT32_C(0x0) /* rx path */ - #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) + #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX UINT32_C(0x1) #define HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_LAST \ - QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX - uint16_t port_id; + HWRM_QUEUE_QPORTCFG_INPUT_FLAGS_PATH_RX /* * Port ID of port for which the queue configuration is being - * queried. This field is only required when sent by IPC. + * queried. This field is only required when sent by IPC. */ - uint16_t unused_0; + uint16_t port_id; + /* + * Drivers will set this capability when it can use + * queue_idx_service_profile to map the queues to application. + */ + uint8_t drv_qmap_cap; + /* disabled */ + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_DISABLED UINT32_C(0x0) + /* enabled */ + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED UINT32_C(0x1) + #define HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_LAST \ + HWRM_QUEUE_QPORTCFG_INPUT_DRV_QMAP_CAP_ENABLED + uint8_t unused_0; } __attribute__((packed)); /* Output (32 bytes) */ +/* hwrm_queue_qportcfg_output (size:256b/32B) */ struct hwrm_queue_qportcfg_output { - uint16_t error_code; - /* - * Pass/Fail or error type Note: receiver to verify the in - * parameters, and fail the call with an error when appropriate - */ - uint16_t req_type; - /* This field returns the type of original request. */ - uint16_t seq_id; - /* This field provides original sequence number of the command. */ - uint16_t resp_len; - /* - * This field is the length of the response in bytes. The last - * byte of the response is a valid flag that will read as '1' - * when the command has been completely written to memory. - */ - uint8_t max_configurable_queues; + /* The specific error status for the command. */ + uint16_t error_code; + /* The HWRM command request type. */ + uint16_t req_type; + /* The sequence ID from the original command. */ + uint16_t seq_id; + /* The length of the response data in number of bytes. */ + uint16_t resp_len; /* * The maximum number of queues that can be configured on this - * port. Valid values range from 1 through 8. + * port. + * Valid values range from 1 through 8. */ - uint8_t max_configurable_lossless_queues; + uint8_t max_configurable_queues; /* * The maximum number of lossless queues that can be configured - * on this port. Valid values range from 0 through 8. + * on this port. + * Valid values range from 0 through 8. */ - uint8_t queue_cfg_allowed; + uint8_t max_configurable_lossless_queues; /* * Bitmask indicating which queues can be configured by the - * hwrm_queue_cfg command. Each bit represents a specific queue - * where bit 0 represents queue 0 and bit 7 represents queue 7. + * hwrm_queue_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. * # A value of 0 indicates that the queue is not configurable - * by the hwrm_queue_cfg command. # A value of 1 indicates that - * the queue is configurable. # A hwrm_queue_cfg command shall - * return error when trying to configure a queue not - * configurable. + * by the hwrm_queue_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_cfg command shall return error when trying to + * configure a queue not configurable. */ - uint8_t queue_cfg_info; + uint8_t queue_cfg_allowed; /* Information about queue configuration. */ - /* - * If this flag is set to '1', then the queues are configured - * asymmetrically on TX and RX sides. If this flag is set to - * '0', then the queues are configured symmetrically on TX and - * RX sides. For symmetric configuration, the queue - * configuration including queue ids and service profiles on the - * TX side is the same as the corresponding queue configuration - * on the RX side. - */ - #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG UINT32_C(0x1) - uint8_t queue_pfcenable_cfg_allowed; + uint8_t queue_cfg_info; + /* + * If this flag is set to '1', then the queues are + * configured asymmetrically on TX and RX sides. + * If this flag is set to '0', then the queues are + * configured symmetrically on TX and RX sides. For + * symmetric configuration, the queue configuration + * including queue ids and service profiles on the + * TX side is the same as the corresponding queue + * configuration on the RX side. + */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_CFG_INFO_ASYM_CFG \ + UINT32_C(0x1) /* * Bitmask indicating which queues can be configured by the - * hwrm_queue_pfcenable_cfg command. Each bit represents a - * specific priority where bit 0 represents priority 0 and bit 7 - * represents priority 7. # A value of 0 indicates that the - * priority is not configurable by the hwrm_queue_pfcenable_cfg - * command. # A value of 1 indicates that the priority is - * configurable. # A hwrm_queue_pfcenable_cfg command shall - * return error when trying to configure a priority that is not - * configurable. - */ - uint8_t queue_pri2cos_cfg_allowed; + * hwrm_queue_pfcenable_cfg command. + * + * Each bit represents a specific priority where bit 0 represents + * priority 0 and bit 7 represents priority 7. + * # A value of 0 indicates that the priority is not configurable by + * the hwrm_queue_pfcenable_cfg command. + * # A value of 1 indicates that the priority is configurable. + * # A hwrm_queue_pfcenable_cfg command shall return error when + * trying to configure a priority that is not configurable. + */ + uint8_t queue_pfcenable_cfg_allowed; /* * Bitmask indicating which queues can be configured by the - * hwrm_queue_pri2cos_cfg command. Each bit represents a - * specific queue where bit 0 represents queue 0 and bit 7 - * represents queue 7. # A value of 0 indicates that the queue - * is not configurable by the hwrm_queue_pri2cos_cfg command. # - * A value of 1 indicates that the queue is configurable. # A - * hwrm_queue_pri2cos_cfg command shall return error when trying - * to configure a queue that is not configurable. + * hwrm_queue_pri2cos_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. + * # A value of 0 indicates that the queue is not configurable + * by the hwrm_queue_pri2cos_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_pri2cos_cfg command shall return error when + * trying to configure a queue that is not configurable. */ - uint8_t queue_cos2bw_cfg_allowed; + uint8_t queue_pri2cos_cfg_allowed; /* * Bitmask indicating which queues can be configured by the - * hwrm_queue_pri2cos_cfg command. Each bit represents a - * specific queue where bit 0 represents queue 0 and bit 7 - * represents queue 7. # A value of 0 indicates that the queue - * is not configurable by the hwrm_queue_pri2cos_cfg command. # - * A value of 1 indicates that the queue is configurable. # A - * hwrm_queue_pri2cos_cfg command shall return error when trying - * to configure a queue not configurable. - */ - uint8_t queue_id0; - /* - * ID of CoS Queue 0. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + * hwrm_queue_pri2cos_cfg command. + * + * Each bit represents a specific queue where bit 0 represents + * queue 0 and bit 7 represents queue 7. + * # A value of 0 indicates that the queue is not configurable + * by the hwrm_queue_pri2cos_cfg command. + * # A value of 1 indicates that the queue is configurable. + * # A hwrm_queue_pri2cos_cfg command shall return error when + * trying to configure a queue not configurable. + */ + uint8_t queue_cos2bw_cfg_allowed; + /* + * ID of CoS Queue 0. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id0_service_profile; + uint8_t queue_id0; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id0_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id1; - /* - * ID of CoS Queue 1. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID0_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 1. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id1_service_profile; + uint8_t queue_id1; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id1_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id2; - /* - * ID of CoS Queue 2. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID1_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 2. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id2_service_profile; + uint8_t queue_id2; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id2_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id3; - /* - * ID of CoS Queue 3. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID2_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 3. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id3_service_profile; + uint8_t queue_id3; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id3_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id4; - /* - * ID of CoS Queue 4. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID3_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 4. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id4_service_profile; + uint8_t queue_id4; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id4_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id5; - /* - * ID of CoS Queue 5. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID4_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 5. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id5_service_profile; + uint8_t queue_id5; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id5_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id6; - /* - * ID of CoS Queue 6. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID5_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 6. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id6_service_profile; + uint8_t queue_id6; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id6_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t queue_id7; - /* - * ID of CoS Queue 7. FF - Invalid id # This ID can be used on - * any subsequent call to an hwrm command that takes a queue id. + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID6_SERVICE_PROFILE_UNKNOWN + /* + * ID of CoS Queue 7. + * FF - Invalid id + * + * # This ID can be used on any subsequent call to an hwrm command + * that takes a queue id. * # IDs must always be queried by this command before any use - * by the driver or software. # Any driver or software should - * not make any assumptions about queue IDs. # A value of 0xff - * indicates that the queue is not available. # Available queues - * may not be in sequential order. + * by the driver or software. + * # Any driver or software should not make any assumptions about + * queue IDs. + * # A value of 0xff indicates that the queue is not available. + * # Available queues may not be in sequential order. */ - uint8_t queue_id7_service_profile; + uint8_t queue_id7; /* This value is applicable to CoS queues only. */ - /* Lossy (best-effort) */ + uint8_t queue_id7_service_profile; + /* Lossy (best-effort) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY \ UINT32_C(0x0) - /* Lossless */ + /* Lossless (legacy) */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS \ UINT32_C(0x1) - /* - * Set to 0xFF... (All Fs) if there is no - * service profile specified - */ + /* Lossless RoCE */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_ROCE \ + UINT32_C(0x1) + /* Lossy RoCE CNP */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSY_ROCE_CNP \ + UINT32_C(0x2) + /* Lossless NIC */ + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LOSSLESS_NIC \ + UINT32_C(0x3) + /* Set to 0xFF... (All Fs) if there is no service profile specified */ #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN \ UINT32_C(0xff) - uint8_t valid; + #define HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_LAST \ + HWRM_QUEUE_QPORTCFG_OUTPUT_QUEUE_ID7_SERVICE_PROFILE_UNKNOWN /* - * This field is used in Output records to indicate that the - * output is completely written to RAM. This field should be - * read as '1' to indicate that the output has been completely - * written. When writing a command completion or response to an - * internal processor, the order of writes has to be such that - * this field is written last. + * This field is used in Output records to indicate that the output + * is completely written to RAM. This field should be read as '1' + * to indicate that the output has been completely written. + * When writing a command completion or response to an internal + * processor, + * the order of writes has to be such that this field is written last. */ + uint8_t valid; } __attribute__((packed)); /*********************