From: Adam Dybkowski Date: Thu, 16 Apr 2020 12:24:38 +0000 (+0200) Subject: crypto/qat: support plain SHA1..SHA512 hashes X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=6e21c1a532446ebc7e0b970abef7955841a0f572;p=dpdk.git crypto/qat: support plain SHA1..SHA512 hashes This patch adds support for plain SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 hashes to QAT PMD. Signed-off-by: Adam Dybkowski Acked-by: Fiona Trahe --- diff --git a/doc/guides/cryptodevs/features/qat.ini b/doc/guides/cryptodevs/features/qat.ini index 6e350eb81f..a722419979 100644 --- a/doc/guides/cryptodevs/features/qat.ini +++ b/doc/guides/cryptodevs/features/qat.ini @@ -44,10 +44,15 @@ ZUC EEA3 = Y [Auth] NULL = Y MD5 HMAC = Y +SHA1 = Y SHA1 HMAC = Y +SHA224 = Y SHA224 HMAC = Y +SHA256 = Y SHA256 HMAC = Y +SHA384 = Y SHA384 HMAC = Y +SHA512 = Y SHA512 HMAC = Y AES GMAC = Y SNOW3G UIA2 = Y diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst index 4ea7985a78..c2cc3d5cae 100644 --- a/doc/guides/cryptodevs/qat.rst +++ b/doc/guides/cryptodevs/qat.rst @@ -52,10 +52,15 @@ Cipher algorithms: Hash algorithms: +* ``RTE_CRYPTO_AUTH_SHA1`` * ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA224`` * ``RTE_CRYPTO_AUTH_SHA224_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256`` * ``RTE_CRYPTO_AUTH_SHA256_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA384`` * ``RTE_CRYPTO_AUTH_SHA384_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA512`` * ``RTE_CRYPTO_AUTH_SHA512_HMAC`` * ``RTE_CRYPTO_AUTH_AES_XCBC_MAC`` * ``RTE_CRYPTO_AUTH_SNOW3G_UIA2`` diff --git a/doc/guides/rel_notes/release_20_05.rst b/doc/guides/rel_notes/release_20_05.rst index 3f87203c64..348a715f3e 100644 --- a/doc/guides/rel_notes/release_20_05.rst +++ b/doc/guides/rel_notes/release_20_05.rst @@ -90,6 +90,11 @@ New Features when running on GEN2 QAT hardware with particular firmware versions (GEN3 support was added in DPDK 20.02). +* **Added plain SHA-1,224,256,384,512 support to QAT PMD.** + + Added support for plain SHA-1, SHA-224, SHA-256, SHA-384 and SHA-512 hashes + to QAT PMD. + * **Added QAT intermediate buffer too small handling in QAT compression PMD.** Added a special way of buffer handling when internal QAT intermediate buffer diff --git a/drivers/crypto/qat/qat_sym_capabilities.h b/drivers/crypto/qat/qat_sym_capabilities.h index 27e57aaaf8..ff691ce353 100644 --- a/drivers/crypto/qat/qat_sym_capabilities.h +++ b/drivers/crypto/qat/qat_sym_capabilities.h @@ -6,6 +6,111 @@ #define _QAT_SYM_CAPABILITIES_H_ #define QAT_BASE_GEN1_SYM_CAPABILITIES \ + { /* SHA1 */ \ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ + {.sym = { \ + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \ + {.auth = { \ + .algo = RTE_CRYPTO_AUTH_SHA1, \ + .block_size = 64, \ + .key_size = { \ + .min = 0, \ + .max = 0, \ + .increment = 0 \ + }, \ + .digest_size = { \ + .min = 1, \ + .max = 20, \ + .increment = 1 \ + }, \ + .iv_size = { 0 } \ + }, } \ + }, } \ + }, \ + { /* SHA224 */ \ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ + {.sym = { \ + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \ + {.auth = { \ + .algo = RTE_CRYPTO_AUTH_SHA224, \ + .block_size = 64, \ + .key_size = { \ + .min = 0, \ + .max = 0, \ + .increment = 0 \ + }, \ + .digest_size = { \ + .min = 1, \ + .max = 28, \ + .increment = 1 \ + }, \ + .iv_size = { 0 } \ + }, } \ + }, } \ + }, \ + { /* SHA256 */ \ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ + {.sym = { \ + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \ + {.auth = { \ + .algo = RTE_CRYPTO_AUTH_SHA256, \ + .block_size = 64, \ + .key_size = { \ + .min = 0, \ + .max = 0, \ + .increment = 0 \ + }, \ + .digest_size = { \ + .min = 1, \ + .max = 32, \ + .increment = 1 \ + }, \ + .iv_size = { 0 } \ + }, } \ + }, } \ + }, \ + { /* SHA384 */ \ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ + {.sym = { \ + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \ + {.auth = { \ + .algo = RTE_CRYPTO_AUTH_SHA384, \ + .block_size = 128, \ + .key_size = { \ + .min = 0, \ + .max = 0, \ + .increment = 0 \ + }, \ + .digest_size = { \ + .min = 1, \ + .max = 48, \ + .increment = 1 \ + }, \ + .iv_size = { 0 } \ + }, } \ + }, } \ + }, \ + { /* SHA512 */ \ + .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ + {.sym = { \ + .xform_type = RTE_CRYPTO_SYM_XFORM_AUTH, \ + {.auth = { \ + .algo = RTE_CRYPTO_AUTH_SHA512, \ + .block_size = 128, \ + .key_size = { \ + .min = 0, \ + .max = 0, \ + .increment = 0 \ + }, \ + .digest_size = { \ + .min = 1, \ + .max = 64, \ + .increment = 1 \ + }, \ + .iv_size = { 0 } \ + }, } \ + }, } \ + }, \ { /* SHA1 HMAC */ \ .op = RTE_CRYPTO_OP_TYPE_SYMMETRIC, \ {.sym = { \ diff --git a/drivers/crypto/qat/qat_sym_session.c b/drivers/crypto/qat/qat_sym_session.c index fd2cc382e6..3727d564d8 100644 --- a/drivers/crypto/qat/qat_sym_session.c +++ b/drivers/crypto/qat/qat_sym_session.c @@ -19,6 +19,41 @@ #include "qat_sym_session.h" #include "qat_sym_pmd.h" +/* SHA1 - 20 bytes - Initialiser state can be found in FIPS stds 180-2 */ +static const uint8_t sha1InitialState[] = { + 0x67, 0x45, 0x23, 0x01, 0xef, 0xcd, 0xab, 0x89, 0x98, 0xba, + 0xdc, 0xfe, 0x10, 0x32, 0x54, 0x76, 0xc3, 0xd2, 0xe1, 0xf0}; + +/* SHA 224 - 32 bytes - Initialiser state can be found in FIPS stds 180-2 */ +static const uint8_t sha224InitialState[] = { + 0xc1, 0x05, 0x9e, 0xd8, 0x36, 0x7c, 0xd5, 0x07, 0x30, 0x70, 0xdd, + 0x17, 0xf7, 0x0e, 0x59, 0x39, 0xff, 0xc0, 0x0b, 0x31, 0x68, 0x58, + 0x15, 0x11, 0x64, 0xf9, 0x8f, 0xa7, 0xbe, 0xfa, 0x4f, 0xa4}; + +/* SHA 256 - 32 bytes - Initialiser state can be found in FIPS stds 180-2 */ +static const uint8_t sha256InitialState[] = { + 0x6a, 0x09, 0xe6, 0x67, 0xbb, 0x67, 0xae, 0x85, 0x3c, 0x6e, 0xf3, + 0x72, 0xa5, 0x4f, 0xf5, 0x3a, 0x51, 0x0e, 0x52, 0x7f, 0x9b, 0x05, + 0x68, 0x8c, 0x1f, 0x83, 0xd9, 0xab, 0x5b, 0xe0, 0xcd, 0x19}; + +/* SHA 384 - 64 bytes - Initialiser state can be found in FIPS stds 180-2 */ +static const uint8_t sha384InitialState[] = { + 0xcb, 0xbb, 0x9d, 0x5d, 0xc1, 0x05, 0x9e, 0xd8, 0x62, 0x9a, 0x29, + 0x2a, 0x36, 0x7c, 0xd5, 0x07, 0x91, 0x59, 0x01, 0x5a, 0x30, 0x70, + 0xdd, 0x17, 0x15, 0x2f, 0xec, 0xd8, 0xf7, 0x0e, 0x59, 0x39, 0x67, + 0x33, 0x26, 0x67, 0xff, 0xc0, 0x0b, 0x31, 0x8e, 0xb4, 0x4a, 0x87, + 0x68, 0x58, 0x15, 0x11, 0xdb, 0x0c, 0x2e, 0x0d, 0x64, 0xf9, 0x8f, + 0xa7, 0x47, 0xb5, 0x48, 0x1d, 0xbe, 0xfa, 0x4f, 0xa4}; + +/* SHA 512 - 64 bytes - Initialiser state can be found in FIPS stds 180-2 */ +static const uint8_t sha512InitialState[] = { + 0x6a, 0x09, 0xe6, 0x67, 0xf3, 0xbc, 0xc9, 0x08, 0xbb, 0x67, 0xae, + 0x85, 0x84, 0xca, 0xa7, 0x3b, 0x3c, 0x6e, 0xf3, 0x72, 0xfe, 0x94, + 0xf8, 0x2b, 0xa5, 0x4f, 0xf5, 0x3a, 0x5f, 0x1d, 0x36, 0xf1, 0x51, + 0x0e, 0x52, 0x7f, 0xad, 0xe6, 0x82, 0xd1, 0x9b, 0x05, 0x68, 0x8c, + 0x2b, 0x3e, 0x6c, 0x1f, 0x1f, 0x83, 0xd9, 0xab, 0xfb, 0x41, 0xbd, + 0x6b, 0x5b, 0xe0, 0xcd, 0x19, 0x13, 0x7e, 0x21, 0x79}; + /** Frees a context previously created * Depends on openssl libcrypto */ @@ -665,8 +700,29 @@ qat_sym_session_configure_auth(struct rte_cryptodev *dev, session->auth_iv.offset = auth_xform->iv.offset; session->auth_iv.length = auth_xform->iv.length; + session->auth_mode = ICP_QAT_HW_AUTH_MODE1; switch (auth_xform->algo) { + case RTE_CRYPTO_AUTH_SHA1: + session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA1; + session->auth_mode = ICP_QAT_HW_AUTH_MODE0; + break; + case RTE_CRYPTO_AUTH_SHA224: + session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA224; + session->auth_mode = ICP_QAT_HW_AUTH_MODE0; + break; + case RTE_CRYPTO_AUTH_SHA256: + session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA256; + session->auth_mode = ICP_QAT_HW_AUTH_MODE0; + break; + case RTE_CRYPTO_AUTH_SHA384: + session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA384; + session->auth_mode = ICP_QAT_HW_AUTH_MODE0; + break; + case RTE_CRYPTO_AUTH_SHA512: + session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA512; + session->auth_mode = ICP_QAT_HW_AUTH_MODE0; + break; case RTE_CRYPTO_AUTH_SHA1_HMAC: session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_SHA1; break; @@ -722,11 +778,6 @@ qat_sym_session_configure_auth(struct rte_cryptodev *dev, } session->qat_hash_alg = ICP_QAT_HW_AUTH_ALGO_ZUC_3G_128_EIA3; break; - case RTE_CRYPTO_AUTH_SHA1: - case RTE_CRYPTO_AUTH_SHA256: - case RTE_CRYPTO_AUTH_SHA512: - case RTE_CRYPTO_AUTH_SHA224: - case RTE_CRYPTO_AUTH_SHA384: case RTE_CRYPTO_AUTH_MD5: case RTE_CRYPTO_AUTH_AES_CBC_MAC: QAT_LOG(ERR, "Crypto: Unsupported hash alg %u", @@ -811,6 +862,8 @@ qat_sym_session_configure_aead(struct rte_cryptodev *dev, session->cipher_iv.offset = xform->aead.iv.offset; session->cipher_iv.length = xform->aead.iv.length; + session->auth_mode = ICP_QAT_HW_AUTH_MODE1; + switch (aead_xform->algo) { case RTE_CRYPTO_AEAD_AES_GCM: if (qat_sym_validate_aes_key(aead_xform->key.length, @@ -1661,10 +1714,11 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, hash = (struct icp_qat_hw_auth_setup *)cdesc->cd_cur_ptr; hash->auth_config.reserved = 0; hash->auth_config.config = - ICP_QAT_HW_AUTH_CONFIG_BUILD(ICP_QAT_HW_AUTH_MODE1, + ICP_QAT_HW_AUTH_CONFIG_BUILD(cdesc->auth_mode, cdesc->qat_hash_alg, digestsize); - if (cdesc->qat_hash_alg == ICP_QAT_HW_AUTH_ALGO_SNOW_3G_UIA2 + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0 + || cdesc->qat_hash_alg == ICP_QAT_HW_AUTH_ALGO_SNOW_3G_UIA2 || cdesc->qat_hash_alg == ICP_QAT_HW_AUTH_ALGO_KASUMI_F9 || cdesc->qat_hash_alg == ICP_QAT_HW_AUTH_ALGO_ZUC_3G_128_EIA3 || cdesc->qat_hash_alg == ICP_QAT_HW_AUTH_ALGO_AES_XCBC_MAC @@ -1687,6 +1741,15 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, */ switch (cdesc->qat_hash_alg) { case ICP_QAT_HW_AUTH_ALGO_SHA1: + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0) { + /* Plain SHA-1 */ + rte_memcpy(cdesc->cd_cur_ptr, sha1InitialState, + sizeof(sha1InitialState)); + state1_size = qat_hash_get_state1_size( + cdesc->qat_hash_alg); + break; + } + /* SHA-1 HMAC */ if (qat_sym_do_precomputes(ICP_QAT_HW_AUTH_ALGO_SHA1, authkey, authkeylen, cdesc->cd_cur_ptr, &state1_size, cdesc->aes_cmac)) { @@ -1696,6 +1759,15 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, state2_size = RTE_ALIGN_CEIL(ICP_QAT_HW_SHA1_STATE2_SZ, 8); break; case ICP_QAT_HW_AUTH_ALGO_SHA224: + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0) { + /* Plain SHA-224 */ + rte_memcpy(cdesc->cd_cur_ptr, sha224InitialState, + sizeof(sha224InitialState)); + state1_size = qat_hash_get_state1_size( + cdesc->qat_hash_alg); + break; + } + /* SHA-224 HMAC */ if (qat_sym_do_precomputes(ICP_QAT_HW_AUTH_ALGO_SHA224, authkey, authkeylen, cdesc->cd_cur_ptr, &state1_size, cdesc->aes_cmac)) { @@ -1705,6 +1777,15 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, state2_size = ICP_QAT_HW_SHA224_STATE2_SZ; break; case ICP_QAT_HW_AUTH_ALGO_SHA256: + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0) { + /* Plain SHA-256 */ + rte_memcpy(cdesc->cd_cur_ptr, sha256InitialState, + sizeof(sha256InitialState)); + state1_size = qat_hash_get_state1_size( + cdesc->qat_hash_alg); + break; + } + /* SHA-256 HMAC */ if (qat_sym_do_precomputes(ICP_QAT_HW_AUTH_ALGO_SHA256, authkey, authkeylen, cdesc->cd_cur_ptr, &state1_size, cdesc->aes_cmac)) { @@ -1714,6 +1795,15 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, state2_size = ICP_QAT_HW_SHA256_STATE2_SZ; break; case ICP_QAT_HW_AUTH_ALGO_SHA384: + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0) { + /* Plain SHA-384 */ + rte_memcpy(cdesc->cd_cur_ptr, sha384InitialState, + sizeof(sha384InitialState)); + state1_size = qat_hash_get_state1_size( + cdesc->qat_hash_alg); + break; + } + /* SHA-384 HMAC */ if (qat_sym_do_precomputes(ICP_QAT_HW_AUTH_ALGO_SHA384, authkey, authkeylen, cdesc->cd_cur_ptr, &state1_size, cdesc->aes_cmac)) { @@ -1723,6 +1813,15 @@ int qat_sym_session_aead_create_cd_auth(struct qat_sym_session *cdesc, state2_size = ICP_QAT_HW_SHA384_STATE2_SZ; break; case ICP_QAT_HW_AUTH_ALGO_SHA512: + if (cdesc->auth_mode == ICP_QAT_HW_AUTH_MODE0) { + /* Plain SHA-512 */ + rte_memcpy(cdesc->cd_cur_ptr, sha512InitialState, + sizeof(sha512InitialState)); + state1_size = qat_hash_get_state1_size( + cdesc->qat_hash_alg); + break; + } + /* SHA-512 HMAC */ if (qat_sym_do_precomputes(ICP_QAT_HW_AUTH_ALGO_SHA512, authkey, authkeylen, cdesc->cd_cur_ptr, &state1_size, cdesc->aes_cmac)) { diff --git a/drivers/crypto/qat/qat_sym_session.h b/drivers/crypto/qat/qat_sym_session.h index 5a01c81796..e6538f627a 100644 --- a/drivers/crypto/qat/qat_sym_session.h +++ b/drivers/crypto/qat/qat_sym_session.h @@ -67,6 +67,7 @@ struct qat_sym_session { enum icp_qat_hw_cipher_mode qat_mode; enum icp_qat_hw_auth_algo qat_hash_alg; enum icp_qat_hw_auth_op auth_op; + enum icp_qat_hw_auth_mode auth_mode; void *bpi_ctx; struct qat_sym_cd cd; uint8_t *cd_cur_ptr;