From: Hyong Youb Kim <hyonkim@cisco.com>
Date: Wed, 26 Sep 2018 02:54:21 +0000 (-0700)
Subject: net/enic: add VLAN and csum offloads to simple Tx handler
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=70401fd7784db6f55cce87b91e19d364edce506a;p=dpdk.git

net/enic: add VLAN and csum offloads to simple Tx handler

Currently the simple Tx handler supports no offloads, which makes it
usable only for a small number of benchmarks. Add vlan and checksum
offloads to the handler, as cycles/packet increases only by about 3
cycles, and applications commonly use those offloads.

Signed-off-by: Hyong Youb Kim <hyonkim@cisco.com>
Reviewed-by: John Daley <johndale@cisco.com>
---

diff --git a/drivers/net/enic/enic_main.c b/drivers/net/enic/enic_main.c
index fd940c583e..03c5ef7419 100644
--- a/drivers/net/enic/enic_main.c
+++ b/drivers/net/enic/enic_main.c
@@ -534,6 +534,7 @@ int enic_enable(struct enic *enic)
 	unsigned int index;
 	int err;
 	struct rte_eth_dev *eth_dev = enic->rte_dev;
+	uint64_t simple_tx_offloads;
 
 	eth_dev->data->dev_link.link_speed = vnic_dev_port_speed(enic->vdev);
 	eth_dev->data->dev_link.link_duplex = ETH_LINK_FULL_DUPLEX;
@@ -572,10 +573,17 @@ int enic_enable(struct enic *enic)
 	}
 
 	/*
-	 * Use the simple TX handler if possible. All offloads must be
-	 * disabled.
+	 * Use the simple TX handler if possible. Only checksum offloads
+	 * and vlan insertion are supported.
 	 */
-	if (eth_dev->data->dev_conf.txmode.offloads == 0) {
+	simple_tx_offloads = enic->tx_offload_capa &
+		(DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM |
+		 DEV_TX_OFFLOAD_VLAN_INSERT |
+		 DEV_TX_OFFLOAD_IPV4_CKSUM |
+		 DEV_TX_OFFLOAD_UDP_CKSUM |
+		 DEV_TX_OFFLOAD_TCP_CKSUM);
+	if ((eth_dev->data->dev_conf.txmode.offloads &
+	     ~simple_tx_offloads) == 0) {
 		PMD_INIT_LOG(DEBUG, " use the simple tx handler");
 		eth_dev->tx_pkt_burst = &enic_simple_xmit_pkts;
 		for (index = 0; index < enic->wq_count; index++)
diff --git a/drivers/net/enic/enic_rxtx.c b/drivers/net/enic/enic_rxtx.c
index 8d57c418fc..276a2e5596 100644
--- a/drivers/net/enic/enic_rxtx.c
+++ b/drivers/net/enic/enic_rxtx.c
@@ -842,12 +842,33 @@ static void enqueue_simple_pkts(struct rte_mbuf **pkts,
 				struct enic *enic)
 {
 	struct rte_mbuf *p;
+	uint16_t mss;
 
 	while (n) {
 		n--;
 		p = *pkts++;
 		desc->address = p->buf_iova + p->data_off;
 		desc->length = p->pkt_len;
+		/* VLAN insert */
+		desc->vlan_tag = p->vlan_tci;
+		desc->header_length_flags &=
+			((1 << WQ_ENET_FLAGS_EOP_SHIFT) |
+			 (1 << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT));
+		if (p->ol_flags & PKT_TX_VLAN) {
+			desc->header_length_flags |=
+				1 << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT;
+		}
+		/*
+		 * Checksum offload. We use WQ_ENET_OFFLOAD_MODE_CSUM, which
+		 * is 0, so no need to set offload_mode.
+		 */
+		mss = 0;
+		if (p->ol_flags & PKT_TX_IP_CKSUM)
+			mss |= ENIC_CALC_IP_CKSUM << WQ_ENET_MSS_SHIFT;
+		if (p->ol_flags & PKT_TX_L4_MASK)
+			mss |= ENIC_CALC_TCP_UDP_CKSUM << WQ_ENET_MSS_SHIFT;
+		desc->mss_loopback = mss;
+
 		/*
 		 * The app should not send oversized
 		 * packets. tx_pkt_prepare includes a check as