From: Helin Zhang Date: Tue, 3 Nov 2015 15:40:28 +0000 (+0800) Subject: i40e: enlarge the number of supported queues X-Git-Tag: spdx-start~8152 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=705b57f82054431ed681cc899129e7c70fb36138;p=dpdk.git i40e: enlarge the number of supported queues It enlarges the number of supported queues to hardware allowed maximum. There was a software limitation of 64 per physical port which is not reasonable. Signed-off-by: Helin Zhang --- diff --git a/config/common_bsdapp b/config/common_bsdapp index f202d2f34c..fba29e5d7c 100644 --- a/config/common_bsdapp +++ b/config/common_bsdapp @@ -141,7 +141,7 @@ CONFIG_RTE_LIBRTE_KVARGS=y CONFIG_RTE_LIBRTE_ETHER=y CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=256 +CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 CONFIG_RTE_LIBRTE_IEEE1588=n CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y @@ -189,6 +189,7 @@ CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 # interval up to 8160 us, aligned to 2 (or default value) diff --git a/config/common_linuxapp b/config/common_linuxapp index c1d4bbd43a..7248262940 100644 --- a/config/common_linuxapp +++ b/config/common_linuxapp @@ -139,7 +139,7 @@ CONFIG_RTE_LIBRTE_KVARGS=y CONFIG_RTE_LIBRTE_ETHER=y CONFIG_RTE_LIBRTE_ETHDEV_DEBUG=n CONFIG_RTE_MAX_ETHPORTS=32 -CONFIG_RTE_MAX_QUEUES_PER_PORT=256 +CONFIG_RTE_MAX_QUEUES_PER_PORT=1024 CONFIG_RTE_LIBRTE_IEEE1588=n CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS=16 CONFIG_RTE_ETHDEV_RXTX_CALLBACKS=y @@ -187,6 +187,7 @@ CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y CONFIG_RTE_LIBRTE_I40E_RX_OLFLAGS_ENABLE=y CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n +CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4 # interval up to 8160 us, aligned to 2 (or default value) diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index f099ac0333..730c3b7abc 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -8,11 +8,6 @@ API and ABI deprecation notices are to be posted here. Deprecation Notices ------------------- -* Significant ABI changes are planned for struct rte_eth_dev to support up to - 1024 queues per port. This change will be in release 2.2. - There is no backward compatibility planned from release 2.2. - All binaries will need to be rebuilt from release 2.2. - * The following fields have been deprecated in rte_eth_stats: ibadcrc, ibadlen, imcasts, fdirmatch, fdirmiss, tx_pause_xon, rx_pause_xon, tx_pause_xoff, rx_pause_xoff diff --git a/doc/guides/rel_notes/release_2_2.rst b/doc/guides/rel_notes/release_2_2.rst index b39a78ac6e..e04c23c5a6 100644 --- a/doc/guides/rel_notes/release_2_2.rst +++ b/doc/guides/rel_notes/release_2_2.rst @@ -118,6 +118,13 @@ Drivers Fixed i40e issue that occurred when a DPDK application didn't initialize ports if memory wasn't available on socket 0. +* **i40e: Fixed maximum of 64 queues per port.** + + Fixed the issue in i40e of cannot supporting more than 64 queues per port, + though hardware actually supports that. The real number of queues may vary, + as long as the total number of queues used in PF, VFs, VMDq and FD does not + exceeds the hardware maximum. + * **vhost: Fixed Qemu shutdown.** Fixed issue with libvirt ``virsh destroy`` not killing the VM. @@ -191,6 +198,9 @@ ABI Changes * The new fields rx_desc_lim and tx_desc_lim are added into rte_eth_dev_info structure. +* The maximum number of queues per port CONFIG_RTE_MAX_QUEUES_PER_PORT is + increased to 1024. + * The mbuf structure was changed to support unified packet type. It was already done in 2.1 for CONFIG_RTE_NEXT_ABI. diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c index 843076045a..52c7899b1c 100644 --- a/drivers/net/i40e/i40e_ethdev.c +++ b/drivers/net/i40e/i40e_ethdev.c @@ -2747,9 +2747,8 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev) { struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private); struct i40e_hw *hw = I40E_PF_TO_HW(pf); - uint16_t sum_queues = 0, sum_vsis, left_queues; + uint16_t qp_count = 0, vsi_count = 0; - /* First check if FW support SRIOV */ if (dev->pci_dev->max_vfs && !hw->func_caps.sr_iov_1_1) { PMD_INIT_LOG(ERR, "HW configuration doesn't support SRIOV"); return -EINVAL; @@ -2760,109 +2759,85 @@ i40e_pf_parameter_init(struct rte_eth_dev *dev) pf->fc_conf.low_water[I40E_MAX_TRAFFIC_CLASS] = I40E_DEFAULT_LOW_WATER; pf->flags = I40E_FLAG_HEADER_SPLIT_DISABLED; - pf->max_num_vsi = RTE_MIN(hw->func_caps.num_vsis, I40E_MAX_NUM_VSIS); - PMD_INIT_LOG(INFO, "Max supported VSIs:%u", pf->max_num_vsi); - /* Allocate queues for pf */ - if (hw->func_caps.rss) { + pf->max_num_vsi = hw->func_caps.num_vsis; + pf->lan_nb_qp_max = RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF; + pf->vmdq_nb_qp_max = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM; + pf->vf_nb_qp_max = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF; + + /* FDir queue/VSI allocation */ + pf->fdir_qp_offset = 0; + if (hw->func_caps.fd) { + pf->flags |= I40E_FLAG_FDIR; + pf->fdir_nb_qps = I40E_DEFAULT_QP_NUM_FDIR; + } else { + pf->fdir_nb_qps = 0; + } + qp_count += pf->fdir_nb_qps; + vsi_count += 1; + + /* LAN queue/VSI allocation */ + pf->lan_qp_offset = pf->fdir_qp_offset + pf->fdir_nb_qps; + if (!hw->func_caps.rss) { + pf->lan_nb_qps = 1; + } else { pf->flags |= I40E_FLAG_RSS; if (hw->mac.type == I40E_MAC_X722) pf->flags |= I40E_FLAG_RSS_AQ_CAPABLE; - pf->lan_nb_qps = RTE_MIN(hw->func_caps.num_tx_qp, - (uint32_t)(1 << hw->func_caps.rss_table_entry_width)); - pf->lan_nb_qps = i40e_align_floor(pf->lan_nb_qps); - } else - pf->lan_nb_qps = 1; - sum_queues = pf->lan_nb_qps; - /* Default VSI is not counted in */ - sum_vsis = 0; - PMD_INIT_LOG(INFO, "PF queue pairs:%u", pf->lan_nb_qps); + pf->lan_nb_qps = pf->lan_nb_qp_max; + } + qp_count += pf->lan_nb_qps; + vsi_count += 1; + /* VF queue/VSI allocation */ + pf->vf_qp_offset = pf->lan_qp_offset + pf->lan_nb_qps; if (hw->func_caps.sr_iov_1_1 && dev->pci_dev->max_vfs) { pf->flags |= I40E_FLAG_SRIOV; pf->vf_nb_qps = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF; - if (dev->pci_dev->max_vfs > hw->func_caps.num_vfs) { - PMD_INIT_LOG(ERR, "Config VF number %u, " - "max supported %u.", - dev->pci_dev->max_vfs, - hw->func_caps.num_vfs); - return -EINVAL; - } - if (pf->vf_nb_qps > I40E_MAX_QP_NUM_PER_VF) { - PMD_INIT_LOG(ERR, "FVL VF queue %u, " - "max support %u queues.", - pf->vf_nb_qps, I40E_MAX_QP_NUM_PER_VF); - return -EINVAL; - } pf->vf_num = dev->pci_dev->max_vfs; - sum_queues += pf->vf_nb_qps * pf->vf_num; - sum_vsis += pf->vf_num; - PMD_INIT_LOG(INFO, "Max VF num:%u each has queue pairs:%u", - pf->vf_num, pf->vf_nb_qps); - } else + PMD_DRV_LOG(DEBUG, "%u VF VSIs, %u queues per VF VSI, " + "in total %u queues", pf->vf_num, pf->vf_nb_qps, + pf->vf_nb_qps * pf->vf_num); + } else { + pf->vf_nb_qps = 0; pf->vf_num = 0; + } + qp_count += pf->vf_nb_qps * pf->vf_num; + vsi_count += pf->vf_num; + /* VMDq queue/VSI allocation */ + pf->vmdq_qp_offset = pf->vf_qp_offset + pf->vf_nb_qps * pf->vf_num; if (hw->func_caps.vmdq) { pf->flags |= I40E_FLAG_VMDQ; - pf->vmdq_nb_qps = RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM; + pf->vmdq_nb_qps = pf->vmdq_nb_qp_max; pf->max_nb_vmdq_vsi = 1; - /* - * If VMDQ available, assume a single VSI can be created. Will adjust - * later. - */ - sum_queues += pf->vmdq_nb_qps * pf->max_nb_vmdq_vsi; - sum_vsis += pf->max_nb_vmdq_vsi; + PMD_DRV_LOG(DEBUG, "%u VMDQ VSIs, %u queues per VMDQ VSI, " + "in total %u queues", pf->max_nb_vmdq_vsi, + pf->vmdq_nb_qps, + pf->vmdq_nb_qps * pf->max_nb_vmdq_vsi); } else { pf->vmdq_nb_qps = 0; pf->max_nb_vmdq_vsi = 0; } - pf->nb_cfg_vmdq_vsi = 0; - - if (hw->func_caps.fd) { - pf->flags |= I40E_FLAG_FDIR; - pf->fdir_nb_qps = I40E_DEFAULT_QP_NUM_FDIR; - /** - * Each flow director consumes one VSI and one queue, - * but can't calculate out predictably here. - */ - } + qp_count += pf->vmdq_nb_qps * pf->max_nb_vmdq_vsi; + vsi_count += pf->max_nb_vmdq_vsi; if (hw->func_caps.dcb) pf->flags |= I40E_FLAG_DCB; - if (sum_vsis > pf->max_num_vsi || - sum_queues > hw->func_caps.num_rx_qp) { - PMD_INIT_LOG(ERR, "VSI/QUEUE setting can't be satisfied"); - PMD_INIT_LOG(ERR, "Max VSIs: %u, asked:%u", - pf->max_num_vsi, sum_vsis); - PMD_INIT_LOG(ERR, "Total queue pairs:%u, asked:%u", - hw->func_caps.num_rx_qp, sum_queues); + if (qp_count > hw->func_caps.num_tx_qp) { + PMD_DRV_LOG(ERR, "Failed to allocate %u queues, which exceeds " + "the hardware maximum %u", qp_count, + hw->func_caps.num_tx_qp); return -EINVAL; } - - /* Adjust VMDQ setting to support as many VMs as possible */ - if (pf->flags & I40E_FLAG_VMDQ) { - left_queues = hw->func_caps.num_rx_qp - sum_queues; - - pf->max_nb_vmdq_vsi += RTE_MIN(left_queues / pf->vmdq_nb_qps, - pf->max_num_vsi - sum_vsis); - - /* Limit the max VMDQ number that rte_ether that can support */ - pf->max_nb_vmdq_vsi = RTE_MIN(pf->max_nb_vmdq_vsi, - ETH_64_POOLS - 1); - - PMD_INIT_LOG(INFO, "Max VMDQ VSI num:%u", - pf->max_nb_vmdq_vsi); - PMD_INIT_LOG(INFO, "VMDQ queue pairs:%u", pf->vmdq_nb_qps); - } - - /* Each VSI occupy 1 MSIX interrupt at least, plus IRQ0 for misc intr - * cause */ - if (sum_vsis > hw->func_caps.num_msix_vectors - 1) { - PMD_INIT_LOG(ERR, "Too many VSIs(%u), MSIX intr(%u) not enough", - sum_vsis, hw->func_caps.num_msix_vectors); + if (vsi_count > hw->func_caps.num_vsis) { + PMD_DRV_LOG(ERR, "Failed to allocate %u VSIs, which exceeds " + "the hardware maximum %u", vsi_count, + hw->func_caps.num_vsis); return -EINVAL; } - return I40E_SUCCESS; + + return 0; } static int @@ -3252,7 +3227,8 @@ i40e_vsi_config_tc_queue_mapping(struct i40e_vsi *vsi, bsf = rte_bsf32(qpnum_per_tc); /* Adjust the queue number to actual queues that can be applied */ - vsi->nb_qps = qpnum_per_tc * total_tc; + if (!(vsi->type == I40E_VSI_MAIN && total_tc == 1)) + vsi->nb_qps = qpnum_per_tc * total_tc; /** * Configure TC and queue mapping parameters, for enabled TC, diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h index de3b9d9cb8..fe3d331100 100644 --- a/drivers/net/i40e/i40e_ethdev.h +++ b/drivers/net/i40e/i40e_ethdev.h @@ -402,10 +402,18 @@ struct i40e_pf { uint16_t vf_num; /* Each of below queue pairs should be power of 2 since it's the precondition after TC configuration applied */ + uint16_t lan_nb_qp_max; uint16_t lan_nb_qps; /* The number of queue pairs of LAN */ + uint16_t lan_qp_offset; + uint16_t vmdq_nb_qp_max; uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */ + uint16_t vmdq_qp_offset; + uint16_t vf_nb_qp_max; uint16_t vf_nb_qps; /* The number of queue pairs of VF */ + uint16_t vf_qp_offset; uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director */ + uint16_t fdir_qp_offset; + uint16_t hash_lut_size; /* The size of hash lookup table */ /* store VXLAN UDP ports */ uint16_t vxlan_ports[I40E_MAX_PF_UDP_OFFLOAD_PORTS];