From: Ferruh Yigit Date: Fri, 17 Feb 2017 13:42:38 +0000 (+0000) Subject: net/kni: add KNI PMD X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=75e2bc54c018;p=dpdk.git net/kni: add KNI PMD Add KNI PMD which wraps librte_kni for ease of use. KNI PMD can be used as any regular PMD to send / receive packets to the Linux networking stack. Signed-off-by: Ferruh Yigit Reviewed-by: Yong Wang Acked-by: Bruce Richardson Acked-by: Yong Wang --- diff --git a/MAINTAINERS b/MAINTAINERS index c48f7a9e40..6e6b1c214d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -405,6 +405,11 @@ M: Keith Wiles F: drivers/net/tap/ F: doc/guides/nics/tap.rst +KNI PMD +M: Ferruh Yigit +F: drivers/net/kni/ +F: doc/guides/nics/kni.rst + Ring PMD M: Bruce Richardson F: drivers/net/ring/ diff --git a/config/common_base b/config/common_base index 41191c8783..9134b1fbf9 100644 --- a/config/common_base +++ b/config/common_base @@ -589,6 +589,7 @@ CONFIG_RTE_PIPELINE_STATS_COLLECT=n # Compile librte_kni # CONFIG_RTE_LIBRTE_KNI=n +CONFIG_RTE_LIBRTE_PMD_KNI=n CONFIG_RTE_KNI_KMOD=n CONFIG_RTE_KNI_KMOD_ETHTOOL=n CONFIG_RTE_KNI_PREEMPT_DEFAULT=y diff --git a/config/common_linuxapp b/config/common_linuxapp index 00ebaac3de..d03a60a2e9 100644 --- a/config/common_linuxapp +++ b/config/common_linuxapp @@ -39,6 +39,7 @@ CONFIG_RTE_EAL_IGB_UIO=y CONFIG_RTE_EAL_VFIO=y CONFIG_RTE_KNI_KMOD=y CONFIG_RTE_LIBRTE_KNI=y +CONFIG_RTE_LIBRTE_PMD_KNI=y CONFIG_RTE_LIBRTE_VHOST=y CONFIG_RTE_LIBRTE_PMD_VHOST=y CONFIG_RTE_LIBRTE_PMD_AF_PACKET=y diff --git a/doc/guides/nics/features/kni.ini b/doc/guides/nics/features/kni.ini new file mode 100644 index 0000000000..6deb66ae2d --- /dev/null +++ b/doc/guides/nics/features/kni.ini @@ -0,0 +1,7 @@ +; +; Supported features of the 'kni' network poll mode driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Usage doc = Y diff --git a/doc/guides/nics/index.rst b/doc/guides/nics/index.rst index 87f9334953..524862510f 100644 --- a/doc/guides/nics/index.rst +++ b/doc/guides/nics/index.rst @@ -46,6 +46,7 @@ Network Interface Controller Drivers i40e ixgbe intel_vf + kni mlx4 mlx5 nfp diff --git a/doc/guides/nics/kni.rst b/doc/guides/nics/kni.rst new file mode 100644 index 0000000000..77542b56e3 --- /dev/null +++ b/doc/guides/nics/kni.rst @@ -0,0 +1,197 @@ +.. BSD LICENSE + Copyright(c) 2017 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +KNI Poll Mode Driver +====================== + +KNI PMD is wrapper to the :ref:`librte_kni ` library. + +This PMD enables using KNI without having a KNI specific application, +any forwarding application can use PMD interface for KNI. + +Sending packets to any DPDK controlled interface or sending to the +Linux networking stack will be transparent to the DPDK application. + +To create a KNI device ``net_kni#`` device name should be used, and this +will create ``kni#`` Linux virtual network interface. + +There is no physical device backend for the virtual KNI device. + +Packets sent to the KNI Linux interface will be received by the DPDK +application, and DPDK application may forward packets to a physical NIC +or to a virtual device (like another KNI interface or PCAP interface). + +To forward any traffic from physical NIC to the Linux networking stack, +an application should control a physical port and create one virtual KNI port, +and forward between two. + +Using this PMD requires KNI kernel module be inserted. + + +Usage +----- + +EAL ``--vdev`` argument can be used to create KNI device instance, like:: + + testpmd --vdev=net_kni0 --vdev=net_kn1 -- -i + +Above command will create ``kni0`` and ``kni1`` Linux network interfaces, +those interfaces can be controlled by standard Linux tools. + +When testpmd forwarding starts, any packets sent to ``kni0`` interface +forwarded to the ``kni1`` interface and vice versa. + +There is no hard limit on number of interfaces that can be created. + + +Default interface configuration +------------------------------- + +``librte_kni`` can create Linux network interfaces with different features, +feature set controlled by a configuration struct, and KNI PMD uses a fixed +configuration: + + .. code-block:: console + + Interface name: kni# + force bind kernel thread to a core : NO + mbuf size: MAX_PACKET_SZ + +KNI control path is not supported with the PMD, since there is no physical +backend device by default. + + +PMD arguments +------------- + +``no_request_thread``, by default PMD creates a phtread for each KNI interface +to handle Linux network interface control commands, like ``ifconfig kni0 up`` + +With ``no_request_thread`` option, pthread is not created and control commands +not handled by PMD. + +By default request thread is enabled. And this argument should not be used +most of the time, unless this PMD used with customized DPDK application to handle +requests itself. + +Argument usage:: + + testpmd --vdev "net_kni0,no_request_thread=1" -- -i + + +PMD log messages +---------------- + +If KNI kernel module (rte_kni.ko) not inserted, following error log printed:: + + "KNI: KNI subsystem has not been initialized. Invoke rte_kni_init() first" + + +PMD testing +----------- + +It is possible to test PMD quickly using KNI kernel module loopback feature: + +* Insert KNI kernel module with loopback support: + + .. code-block:: console + + insmod build/kmod/rte_kni.ko lo_mode=lo_mode_fifo_skb + +* Start testpmd with no physical device but two KNI virtual devices: + + .. code-block:: console + + ./testpmd --vdev net_kni0 --vdev net_kni1 -- -i + + .. code-block:: console + + ... + Configuring Port 0 (socket 0) + KNI: pci: 00:00:00 c580:b8 + Port 0: 1A:4A:5B:7C:A2:8C + Configuring Port 1 (socket 0) + KNI: pci: 00:00:00 600:b9 + Port 1: AE:95:21:07:93:DD + Checking link statuses... + Port 0 Link Up - speed 10000 Mbps - full-duplex + Port 1 Link Up - speed 10000 Mbps - full-duplex + Done + testpmd> + +* Observe Linux interfaces + + .. code-block:: console + + $ ifconfig kni0 && ifconfig kni1 + kni0: flags=4098 mtu 1500 + ether ae:8e:79:8e:9b:c8 txqueuelen 1000 (Ethernet) + RX packets 0 bytes 0 (0.0 B) + RX errors 0 dropped 0 overruns 0 frame 0 + TX packets 0 bytes 0 (0.0 B) + TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 + + kni1: flags=4098 mtu 1500 + ether 9e:76:43:53:3e:9b txqueuelen 1000 (Ethernet) + RX packets 0 bytes 0 (0.0 B) + RX errors 0 dropped 0 overruns 0 frame 0 + TX packets 0 bytes 0 (0.0 B) + TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 + + +* Start forwarding with tx_first: + + .. code-block:: console + + testpmd> start tx_first + +* Quit and check forwarding stats: + + .. code-block:: console + + testpmd> quit + Telling cores to stop... + Waiting for lcores to finish... + + ---------------------- Forward statistics for port 0 ---------------------- + RX-packets: 35637905 RX-dropped: 0 RX-total: 35637905 + TX-packets: 35637947 TX-dropped: 0 TX-total: 35637947 + ---------------------------------------------------------------------------- + + ---------------------- Forward statistics for port 1 ---------------------- + RX-packets: 35637915 RX-dropped: 0 RX-total: 35637915 + TX-packets: 35637937 TX-dropped: 0 TX-total: 35637937 + ---------------------------------------------------------------------------- + + +++++++++++++++ Accumulated forward statistics for all ports+++++++++++++++ + RX-packets: 71275820 RX-dropped: 0 RX-total: 71275820 + TX-packets: 71275884 TX-dropped: 0 TX-total: 71275884 + ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ + diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 5b0bc34128..ac5d3b3488 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -85,6 +85,11 @@ DEPDIRS-vmxnet3 = $(core-libs) DIRS-$(CONFIG_RTE_LIBRTE_PMD_XENVIRT) += xenvirt DEPDIRS-xenvirt = $(core-libs) librte_cmdline +ifeq ($(CONFIG_RTE_LIBRTE_KNI),y) +DIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += kni +endif +DEPDIRS-kni = $(core-libs) librte_kni + ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y) DIRS-$(CONFIG_RTE_LIBRTE_PMD_VHOST) += vhost endif # $(CONFIG_RTE_LIBRTE_VHOST) diff --git a/drivers/net/kni/Makefile b/drivers/net/kni/Makefile new file mode 100644 index 0000000000..b3017b170e --- /dev/null +++ b/drivers/net/kni/Makefile @@ -0,0 +1,64 @@ +# BSD LICENSE +# +# Copyright(c) 2017 Intel Corporation. All rights reserved. +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# * Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# * Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# * Neither the name of Intel Corporation nor the names of its +# contributors may be used to endorse or promote products derived +# from this software without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +include $(RTE_SDK)/mk/rte.vars.mk + +# +# library name +# +LIB = librte_pmd_kni.a + +CFLAGS += -O3 +CFLAGS += $(WERROR_FLAGS) +LDLIBS += -lpthread + +EXPORT_MAP := rte_pmd_kni_version.map + +LIBABIVER := 1 + +# +# all source are stored in SRCS-y +# +SRCS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += rte_eth_kni.c + +# +# Export include files +# +SYMLINK-y-include += + +# this lib depends upon: +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_eal +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_ether +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kni +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_kvargs +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mbuf +DEPDIRS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += lib/librte_mempool + +include $(RTE_SDK)/mk/rte.lib.mk diff --git a/drivers/net/kni/rte_eth_kni.c b/drivers/net/kni/rte_eth_kni.c new file mode 100644 index 0000000000..59205e7dd7 --- /dev/null +++ b/drivers/net/kni/rte_eth_kni.c @@ -0,0 +1,515 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2017 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include +#include +#include + +#include +#include +#include +#include +#include + +/* Only single queue supported */ +#define KNI_MAX_QUEUE_PER_PORT 1 + +#define MAX_PACKET_SZ 2048 +#define MAX_KNI_PORTS 8 + +#define ETH_KNI_NO_REQUEST_THREAD_ARG "no_request_thread" +static const char * const valid_arguments[] = { + ETH_KNI_NO_REQUEST_THREAD_ARG, + NULL +}; + +struct eth_kni_args { + int no_request_thread; +}; + +struct pmd_queue_stats { + uint64_t pkts; + uint64_t bytes; + uint64_t err_pkts; +}; + +struct pmd_queue { + struct pmd_internals *internals; + struct rte_mempool *mb_pool; + + struct pmd_queue_stats rx; + struct pmd_queue_stats tx; +}; + +struct pmd_internals { + struct rte_kni *kni; + int is_kni_started; + + pthread_t thread; + int stop_thread; + int no_request_thread; + + struct ether_addr eth_addr; + + struct pmd_queue rx_queues[KNI_MAX_QUEUE_PER_PORT]; + struct pmd_queue tx_queues[KNI_MAX_QUEUE_PER_PORT]; +}; + +static const struct rte_eth_link pmd_link = { + .link_speed = ETH_SPEED_NUM_10G, + .link_duplex = ETH_LINK_FULL_DUPLEX, + .link_status = ETH_LINK_DOWN, + .link_autoneg = ETH_LINK_SPEED_AUTONEG, +}; +static int is_kni_initialized; + +static uint16_t +eth_kni_rx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs) +{ + struct pmd_queue *kni_q = q; + struct rte_kni *kni = kni_q->internals->kni; + uint16_t nb_pkts; + + nb_pkts = rte_kni_rx_burst(kni, bufs, nb_bufs); + + kni_q->rx.pkts += nb_pkts; + kni_q->rx.err_pkts += nb_bufs - nb_pkts; + + return nb_pkts; +} + +static uint16_t +eth_kni_tx(void *q, struct rte_mbuf **bufs, uint16_t nb_bufs) +{ + struct pmd_queue *kni_q = q; + struct rte_kni *kni = kni_q->internals->kni; + uint16_t nb_pkts; + + nb_pkts = rte_kni_tx_burst(kni, bufs, nb_bufs); + + kni_q->tx.pkts += nb_pkts; + kni_q->tx.err_pkts += nb_bufs - nb_pkts; + + return nb_pkts; +} + +static void * +kni_handle_request(void *param) +{ + struct pmd_internals *internals = param; +#define MS 1000 + + while (!internals->stop_thread) { + rte_kni_handle_request(internals->kni); + usleep(500 * MS); + } + + return param; +} + +static int +eth_kni_start(struct rte_eth_dev *dev) +{ + struct pmd_internals *internals = dev->data->dev_private; + uint16_t port_id = dev->data->port_id; + struct rte_mempool *mb_pool; + struct rte_kni_conf conf; + const char *name = dev->data->name + 4; /* remove net_ */ + + snprintf(conf.name, RTE_KNI_NAMESIZE, "%s", name); + conf.force_bind = 0; + conf.group_id = port_id; + conf.mbuf_size = MAX_PACKET_SZ; + mb_pool = internals->rx_queues[0].mb_pool; + + internals->kni = rte_kni_alloc(mb_pool, &conf, NULL); + if (internals->kni == NULL) { + RTE_LOG(ERR, PMD, + "Fail to create kni interface for port: %d\n", + port_id); + return -1; + } + + return 0; +} + +static int +eth_kni_dev_start(struct rte_eth_dev *dev) +{ + struct pmd_internals *internals = dev->data->dev_private; + int ret; + + if (internals->is_kni_started == 0) { + ret = eth_kni_start(dev); + if (ret) + return -1; + internals->is_kni_started = 1; + } + + if (internals->no_request_thread == 0) { + ret = pthread_create(&internals->thread, NULL, + kni_handle_request, internals); + if (ret) { + RTE_LOG(ERR, PMD, + "Fail to create kni request thread\n"); + return -1; + } + } + + dev->data->dev_link.link_status = 1; + + return 0; +} + +static void +eth_kni_dev_stop(struct rte_eth_dev *dev) +{ + struct pmd_internals *internals = dev->data->dev_private; + int ret; + + if (internals->no_request_thread == 0) { + internals->stop_thread = 1; + + ret = pthread_cancel(internals->thread); + if (ret) + RTE_LOG(ERR, PMD, "Can't cancel the thread\n"); + + ret = pthread_join(internals->thread, NULL); + if (ret) + RTE_LOG(ERR, PMD, "Can't join the thread\n"); + + internals->stop_thread = 0; + } + + dev->data->dev_link.link_status = 0; +} + +static int +eth_kni_dev_configure(struct rte_eth_dev *dev __rte_unused) +{ + return 0; +} + +static void +eth_kni_dev_info(struct rte_eth_dev *dev __rte_unused, + struct rte_eth_dev_info *dev_info) +{ + dev_info->max_mac_addrs = 1; + dev_info->max_rx_pktlen = UINT32_MAX; + dev_info->max_rx_queues = KNI_MAX_QUEUE_PER_PORT; + dev_info->max_tx_queues = KNI_MAX_QUEUE_PER_PORT; + dev_info->min_rx_bufsize = 0; + dev_info->pci_dev = NULL; +} + +static int +eth_kni_rx_queue_setup(struct rte_eth_dev *dev, + uint16_t rx_queue_id, + uint16_t nb_rx_desc __rte_unused, + unsigned int socket_id __rte_unused, + const struct rte_eth_rxconf *rx_conf __rte_unused, + struct rte_mempool *mb_pool) +{ + struct pmd_internals *internals = dev->data->dev_private; + struct pmd_queue *q; + + q = &internals->rx_queues[rx_queue_id]; + q->internals = internals; + q->mb_pool = mb_pool; + + dev->data->rx_queues[rx_queue_id] = q; + + return 0; +} + +static int +eth_kni_tx_queue_setup(struct rte_eth_dev *dev, + uint16_t tx_queue_id, + uint16_t nb_tx_desc __rte_unused, + unsigned int socket_id __rte_unused, + const struct rte_eth_txconf *tx_conf __rte_unused) +{ + struct pmd_internals *internals = dev->data->dev_private; + struct pmd_queue *q; + + q = &internals->tx_queues[tx_queue_id]; + q->internals = internals; + + dev->data->tx_queues[tx_queue_id] = q; + + return 0; +} + +static void +eth_kni_queue_release(void *q __rte_unused) +{ +} + +static int +eth_kni_link_update(struct rte_eth_dev *dev __rte_unused, + int wait_to_complete __rte_unused) +{ + return 0; +} + +static void +eth_kni_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats) +{ + unsigned long rx_packets_total = 0, rx_bytes_total = 0; + unsigned long tx_packets_total = 0, tx_bytes_total = 0; + struct rte_eth_dev_data *data = dev->data; + unsigned long tx_packets_err_total = 0; + unsigned int i, num_stats; + struct pmd_queue *q; + + num_stats = RTE_MIN((unsigned int)RTE_ETHDEV_QUEUE_STAT_CNTRS, + data->nb_rx_queues); + for (i = 0; i < num_stats; i++) { + q = data->rx_queues[i]; + stats->q_ipackets[i] = q->rx.pkts; + stats->q_ibytes[i] = q->rx.bytes; + rx_packets_total += stats->q_ipackets[i]; + rx_bytes_total += stats->q_ibytes[i]; + } + + num_stats = RTE_MIN((unsigned int)RTE_ETHDEV_QUEUE_STAT_CNTRS, + data->nb_tx_queues); + for (i = 0; i < num_stats; i++) { + q = data->tx_queues[i]; + stats->q_opackets[i] = q->tx.pkts; + stats->q_obytes[i] = q->tx.bytes; + stats->q_errors[i] = q->tx.err_pkts; + tx_packets_total += stats->q_opackets[i]; + tx_bytes_total += stats->q_obytes[i]; + tx_packets_err_total += stats->q_errors[i]; + } + + stats->ipackets = rx_packets_total; + stats->ibytes = rx_bytes_total; + stats->opackets = tx_packets_total; + stats->obytes = tx_bytes_total; + stats->oerrors = tx_packets_err_total; +} + +static void +eth_kni_stats_reset(struct rte_eth_dev *dev) +{ + struct rte_eth_dev_data *data = dev->data; + struct pmd_queue *q; + unsigned int i; + + for (i = 0; i < data->nb_rx_queues; i++) { + q = data->rx_queues[i]; + q->rx.pkts = 0; + q->rx.bytes = 0; + } + for (i = 0; i < data->nb_tx_queues; i++) { + q = data->tx_queues[i]; + q->tx.pkts = 0; + q->tx.bytes = 0; + q->tx.err_pkts = 0; + } +} + +static const struct eth_dev_ops eth_kni_ops = { + .dev_start = eth_kni_dev_start, + .dev_stop = eth_kni_dev_stop, + .dev_configure = eth_kni_dev_configure, + .dev_infos_get = eth_kni_dev_info, + .rx_queue_setup = eth_kni_rx_queue_setup, + .tx_queue_setup = eth_kni_tx_queue_setup, + .rx_queue_release = eth_kni_queue_release, + .tx_queue_release = eth_kni_queue_release, + .link_update = eth_kni_link_update, + .stats_get = eth_kni_stats_get, + .stats_reset = eth_kni_stats_reset, +}; + +static struct rte_vdev_driver eth_kni_drv; + +static struct rte_eth_dev * +eth_kni_create(const char *name, struct eth_kni_args *args, + unsigned int numa_node) +{ + struct pmd_internals *internals = NULL; + struct rte_eth_dev_data *data; + struct rte_eth_dev *eth_dev; + + RTE_LOG(INFO, PMD, "Creating kni ethdev on numa socket %u\n", + numa_node); + + data = rte_zmalloc_socket(name, sizeof(*data), 0, numa_node); + if (data == NULL) + goto error; + + internals = rte_zmalloc_socket(name, sizeof(*internals), 0, numa_node); + if (internals == NULL) + goto error; + + /* reserve an ethdev entry */ + eth_dev = rte_eth_dev_allocate(name); + if (eth_dev == NULL) + goto error; + + data->dev_private = internals; + data->port_id = eth_dev->data->port_id; + memmove(data->name, eth_dev->data->name, sizeof(data->name)); + data->nb_rx_queues = 1; + data->nb_tx_queues = 1; + data->dev_link = pmd_link; + data->mac_addrs = &internals->eth_addr; + + eth_random_addr(internals->eth_addr.addr_bytes); + + eth_dev->data = data; + eth_dev->dev_ops = ð_kni_ops; + eth_dev->driver = NULL; + + data->dev_flags = RTE_ETH_DEV_DETACHABLE; + data->kdrv = RTE_KDRV_NONE; + data->drv_name = eth_kni_drv.driver.name; + data->numa_node = numa_node; + + internals->no_request_thread = args->no_request_thread; + + return eth_dev; + +error: + rte_free(data); + rte_free(internals); + + return NULL; +} + +static int +kni_init(void) +{ + if (is_kni_initialized == 0) + rte_kni_init(MAX_KNI_PORTS); + + is_kni_initialized++; + + return 0; +} + +static int +eth_kni_kvargs_process(struct eth_kni_args *args, const char *params) +{ + struct rte_kvargs *kvlist; + + kvlist = rte_kvargs_parse(params, valid_arguments); + if (kvlist == NULL) + return -1; + + memset(args, 0, sizeof(struct eth_kni_args)); + + if (rte_kvargs_count(kvlist, ETH_KNI_NO_REQUEST_THREAD_ARG) == 1) + args->no_request_thread = 1; + + rte_kvargs_free(kvlist); + + return 0; +} + +static int +eth_kni_probe(const char *name, const char *params) +{ + struct rte_eth_dev *eth_dev; + struct eth_kni_args args; + int ret; + + RTE_LOG(INFO, PMD, "Initializing eth_kni for %s\n", name); + + ret = eth_kni_kvargs_process(&args, params); + if (ret < 0) + return ret; + + ret = kni_init(); + if (ret < 0) + return ret; + + eth_dev = eth_kni_create(name, &args, rte_socket_id()); + if (eth_dev == NULL) + goto kni_uninit; + + eth_dev->rx_pkt_burst = eth_kni_rx; + eth_dev->tx_pkt_burst = eth_kni_tx; + + return 0; + +kni_uninit: + is_kni_initialized--; + if (is_kni_initialized == 0) + rte_kni_close(); + return -1; +} + +static int +eth_kni_remove(const char *name) +{ + struct rte_eth_dev *eth_dev; + struct pmd_internals *internals; + + RTE_LOG(INFO, PMD, "Un-Initializing eth_kni for %s\n", name); + + /* find the ethdev entry */ + eth_dev = rte_eth_dev_allocated(name); + if (eth_dev == NULL) + return -1; + + eth_kni_dev_stop(eth_dev); + + if (eth_dev->data) { + internals = eth_dev->data->dev_private; + rte_kni_release(internals->kni); + + rte_free(internals); + } + rte_free(eth_dev->data); + + rte_eth_dev_release_port(eth_dev); + + is_kni_initialized--; + if (is_kni_initialized == 0) + rte_kni_close(); + + return 0; +} + +static struct rte_vdev_driver eth_kni_drv = { + .probe = eth_kni_probe, + .remove = eth_kni_remove, +}; + +RTE_PMD_REGISTER_VDEV(net_kni, eth_kni_drv); +RTE_PMD_REGISTER_PARAM_STRING(net_kni, ETH_KNI_NO_REQUEST_THREAD_ARG "="); diff --git a/drivers/net/kni/rte_pmd_kni_version.map b/drivers/net/kni/rte_pmd_kni_version.map new file mode 100644 index 0000000000..8591cc0b18 --- /dev/null +++ b/drivers/net/kni/rte_pmd_kni_version.map @@ -0,0 +1,4 @@ +DPDK_17.05 { + + local: *; +}; diff --git a/mk/rte.app.mk b/mk/rte.app.mk index 336e4485f7..2f9d32ec2a 100644 --- a/mk/rte.app.mk +++ b/mk/rte.app.mk @@ -58,11 +58,6 @@ _LDLIBS-y += -L$(RTE_SDK_BIN)/lib # # Order is important: from higher level to lower level # - -ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) -_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni -endif - _LDLIBS-$(CONFIG_RTE_LIBRTE_PIPELINE) += -lrte_pipeline _LDLIBS-$(CONFIG_RTE_LIBRTE_TABLE) += -lrte_table _LDLIBS-$(CONFIG_RTE_LIBRTE_PORT) += -lrte_port @@ -99,6 +94,10 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_EAL) += -lrte_eal _LDLIBS-$(CONFIG_RTE_LIBRTE_CMDLINE) += -lrte_cmdline _LDLIBS-$(CONFIG_RTE_LIBRTE_REORDER) += -lrte_reorder +ifeq ($(CONFIG_RTE_EXEC_ENV_LINUXAPP),y) +_LDLIBS-$(CONFIG_RTE_LIBRTE_KNI) += -lrte_kni +endif + ifeq ($(CONFIG_RTE_BUILD_SHARED_LIB),n) # plugins (link only if static libraries) _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring @@ -115,6 +114,9 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += -lrte_pmd_enic _LDLIBS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += -lrte_pmd_fm10k _LDLIBS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += -lrte_pmd_i40e _LDLIBS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += -lrte_pmd_ixgbe +ifeq ($(CONFIG_RTE_LIBRTE_KNI),y) +_LDLIBS-$(CONFIG_RTE_LIBRTE_PMD_KNI) += -lrte_pmd_kni +endif _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += -lrte_pmd_mlx4 -libverbs _LDLIBS-$(CONFIG_RTE_LIBRTE_MLX5_PMD) += -lrte_pmd_mlx5 -libverbs _LDLIBS-$(CONFIG_RTE_LIBRTE_NFP_PMD) += -lrte_pmd_nfp -lm