From: Chengwen Feng Date: Wed, 31 Mar 2021 10:01:36 +0000 (+0800) Subject: net/hns3: fix setting default MAC address in bonding of VF X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=76a3836b98c4af6b9aaeaaa50907fe6143d31c55;p=dpdk.git net/hns3: fix setting default MAC address in bonding of VF When start testpmd with two hns3 VFs(0000:bd:01.0, 0000:bd:01.7), and then execute the following commands: testpmd> create bonded device 1 0 testpmd> set bonding mac_addr 2 3c:12:34:56:78:9a testpmd> add bonding slave 0 2 testpmd> add bonding slave 1 2 testpmd> set portmask 0x4 testpmd> port start 2 It will occurs the following error in a low probability: 0000:bd:01.0 hns3_get_mbx_resp(): VF could not get mbx(3,0) head(16) tail(15) lost(1) from PF in_irq:0 0000:bd:01.0 hns3vf_set_default_mac_addr(): Failed to set mac addr(3C:**:**:**:78:9A) for vf: -62 mac_address_slaves_update(1541) - Failed to update port Id 0 MAC address The problem replay: 1. The 'port start 2' command will start slave ports and then set slave mac address, the function call flow: bond_ethdev_start -> mac_address_slaves_update. 2. There are also a monitor task which running in intr thread will check slave ports link status and update slave ports mac address, the function call flow: bond_ethdev_slave_link_status_change_monitor -> bond_ethdev_lsc_event_callback -> mac_address_slaves_update. 3. Because the above step1&2 running on different threads, they may both call drivers ops mac_addr_set which is hns3vf_set_default_mac_addr. 4. hns3vf_set_default_mac_addr will first acquire hw.lock and then send mailbox to PF and wait PF's response message. Note: the PF's response is an independent message which will received in hw.cmq.crq, the receiving operation can only performed in intr thread. 5. So if the step1 operation hold the hw.lock and try get response message, and step2 operation try acquire the hw.lock and so it can't process the response message, this will lead to step1 fail. The solution: 1. make all threads could process the mailbox response message, which protected by the hw.cmq.crq.lock. 2. use the following rules to avoid deadlock: 2.1. ensure use the correct locking sequence: hw.lock > hw.mbx_resp.lock > hw.cmq.crq.lock. 2.2. make sure don't acquire such as hw.lock & hw.mbx_resp.lock again when process mailbox response message. Fixes: 463e748964f5 ("net/hns3: support mailbox") Cc: stable@dpdk.org Signed-off-by: Chengwen Feng Signed-off-by: Min Hu (Connor) --- diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h index 16226f1c13..4efa4033e6 100644 --- a/drivers/net/hns3/hns3_ethdev.h +++ b/drivers/net/hns3/hns3_ethdev.h @@ -439,7 +439,6 @@ struct hns3_hw { struct hns3_cmq cmq; struct hns3_mbx_resp_status mbx_resp; /* mailbox response */ struct hns3_mbx_arq_ring arq; /* mailbox async rx queue */ - pthread_t irq_thread_id; struct hns3_mac mac; unsigned int secondary_cnt; /* Number of secondary processes init'd. */ struct hns3_tqp_stats tqp_stats; diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c index 638be859de..eb47ed320a 100644 --- a/drivers/net/hns3/hns3_ethdev_vf.c +++ b/drivers/net/hns3/hns3_ethdev_vf.c @@ -1109,9 +1109,6 @@ hns3vf_interrupt_handler(void *param) enum hns3vf_evt_cause event_cause; uint32_t clearval; - if (hw->irq_thread_id == 0) - hw->irq_thread_id = pthread_self(); - /* Disable interrupt */ hns3vf_disable_irq0(hw); diff --git a/drivers/net/hns3/hns3_mbx.c b/drivers/net/hns3/hns3_mbx.c index 0b11e89d66..499285d7c2 100644 --- a/drivers/net/hns3/hns3_mbx.c +++ b/drivers/net/hns3/hns3_mbx.c @@ -40,36 +40,14 @@ hns3_resp_to_errno(uint16_t resp_code) return -EIO; } -static void -hns3_poll_all_sync_msg(void) -{ - struct rte_eth_dev *eth_dev; - struct hns3_adapter *adapter; - const char *name; - uint16_t port_id; - - RTE_ETH_FOREACH_DEV(port_id) { - eth_dev = &rte_eth_devices[port_id]; - name = eth_dev->device->driver->name; - if (strcmp(name, "net_hns3") && strcmp(name, "net_hns3_vf")) - continue; - adapter = eth_dev->data->dev_private; - if (!adapter || adapter->hw.adapter_state == HNS3_NIC_CLOSED) - continue; - /* Synchronous msg, the mbx_resp.req_msg_data is non-zero */ - if (adapter->hw.mbx_resp.req_msg_data) - hns3_dev_handle_mbx_msg(&adapter->hw); - } -} - static int hns3_get_mbx_resp(struct hns3_hw *hw, uint16_t code0, uint16_t code1, uint8_t *resp_data, uint16_t resp_len) { #define HNS3_MAX_RETRY_MS 500 +#define HNS3_WAIT_RESP_US 100 struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw); struct hns3_mbx_resp_status *mbx_resp; - bool in_irq = false; uint64_t now; uint64_t end; @@ -96,26 +74,19 @@ hns3_get_mbx_resp(struct hns3_hw *hw, uint16_t code0, uint16_t code1, return -EIO; } - /* - * The mbox response is running on the interrupt thread. - * Sending mbox in the interrupt thread cannot wait for the - * response, so polling the mbox response on the irq thread. - */ - if (pthread_equal(hw->irq_thread_id, pthread_self())) { - in_irq = true; - hns3_poll_all_sync_msg(); - } else { - rte_delay_ms(HNS3_POLL_RESPONE_MS); - } + hns3_dev_handle_mbx_msg(hw); + rte_delay_us(HNS3_WAIT_RESP_US); + now = get_timeofday_ms(); } hw->mbx_resp.req_msg_data = 0; if (now >= end) { hw->mbx_resp.lost++; hns3_err(hw, - "VF could not get mbx(%u,%u) head(%u) tail(%u) lost(%u) from PF in_irq:%d", + "VF could not get mbx(%u,%u) head(%u) tail(%u) " + "lost(%u) from PF", code0, code1, hw->mbx_resp.head, hw->mbx_resp.tail, - hw->mbx_resp.lost, in_irq); + hw->mbx_resp.lost); return -ETIME; } rte_io_rmb(); @@ -368,9 +339,13 @@ hns3_dev_handle_mbx_msg(struct hns3_hw *hw) uint8_t *temp; int i; + rte_spinlock_lock(&hw->cmq.crq.lock); + while (!hns3_cmd_crq_empty(hw)) { - if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED)) + if (__atomic_load_n(&hw->reset.disable_cmd, __ATOMIC_RELAXED)) { + rte_spinlock_unlock(&hw->cmq.crq.lock); return; + } desc = &crq->desc[crq->next_to_use]; req = (struct hns3_mbx_pf_to_vf_cmd *)desc->data; @@ -441,4 +416,6 @@ hns3_dev_handle_mbx_msg(struct hns3_hw *hw) /* Write back CMDQ_RQ header pointer, IMP need this pointer */ hns3_write_dev(hw, HNS3_CMDQ_RX_HEAD_REG, crq->next_to_use); + + rte_spinlock_unlock(&hw->cmq.crq.lock); }