From: Ajit Khaparde Date: Mon, 26 Sep 2016 16:19:07 +0000 (-0500) Subject: net/bnxt: update buffer descriptor definitions X-Git-Tag: spdx-start~5759 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=76fc6a5938916a80060000b5343b4758bfda3567;p=dpdk.git net/bnxt: update buffer descriptor definitions Update the PMD to use the 1.5.1 HWRM API. Most of the changes in the patch are white spaces and rearrangement of the lines - hopefully a onetime change owing to the usage of a different auto generated file. Structures updated in this patch: tx_bd_short, tx_bd_long, tx_bd_long_hi, rx_prod_pkt_bd Signed-off-by: Ajit Khaparde --- diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index b880dfd482..36e264a5cf 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -118,422 +118,442 @@ struct ctx_hw_stats64 { /* Short TX BD (16 bytes) */ struct tx_bd_short { + uint16_t flags_type; /* - * All bits in this field must be valid on the first BD of a packet. - * Only the packet_end bit must be valid for the remaining BDs of a - * packet. + * All bits in this field must be valid on the first BD of a + * packet. Only the packet_end bit must be valid for the + * remaining BDs of a packet. */ /* This value identifies the type of buffer descriptor. */ - #define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f) - #define TX_BD_SHORT_TYPE_SFT 0 - /* - * Indicates that this BD is 16B long and is used for normal L2 - * packet transmission. - */ - #define TX_BD_SHORT_TYPE_TX_BD_SHORT (UINT32_C(0x0) << 0) - /* - * If set to 1, the packet ends with the data in the buffer pointed to - * by this descriptor. This flag must be valid on every BD. - */ - #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) - /* - * If set to 1, the device will not generate a completion for this - * transmit packet unless there is an error in it's processing. If this - * bit is set to 0, then the packet will be completed normally. This bit - * must be valid only on the first BD of a packet. - */ - #define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80) - /* - * This value indicates how many 16B BD locations are consumed in the - * ring by this packet. A value of 1 indicates that this BD is the only - * BD (and that the it is a short BD). A value of 3 indicates either 3 - * short BDs or 1 long BD and one short BD in the packet. A value of 0 - * indicates that there are 32 BD locations in the packet (the maximum). - * This field is valid only on the first BD of a packet. - */ - #define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) - #define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8 - /* - * This value is a hint for the length of the entire packet. It is used - * by the chip to optimize internal processing. The packet will be - * dropped if the hint is too short. This field is valid only on the - * first BD of a packet. - */ - #define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000) - #define TX_BD_SHORT_FLAGS_LHINT_SFT 13 - /* indicates packet length < 512B */ - #define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) - /* indicates 512 <= packet length < 1KB */ - #define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) - /* indicates 1KB <= packet length < 2KB */ - #define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) - /* indicates packet length >= 2KB */ - #define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) - #define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K + #define TX_BD_SHORT_TYPE_MASK UINT32_C(0x3f) + #define TX_BD_SHORT_TYPE_SFT 0 /* - * If set to 1, the device immediately updates the Send Consumer Index - * after the buffer associated with this descriptor has been transferred - * via DMA to NIC memory from host memory. An interrupt may or may not - * be generated according to the state of the interrupt avoidance - * mechanisms. If this bit is set to 0, then the Consumer Index is only - * updated as soon as one of the host interrupt coalescing conditions - * has been met. This bit must be valid on the first BD of a packet. + * Indicates that this BD is 16B long and is + * used for normal L2 packet transmission. */ - #define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000) + #define TX_BD_SHORT_TYPE_TX_BD_SHORT UINT32_C(0x0) /* - * All bits in this field must be valid on the first BD of a packet. - * Only the packet_end bit must be valid for the remaining BDs of a - * packet. + * If set to 1, the packet ends with the data in the buffer + * pointed to by this descriptor. This flag must be valid on + * every BD. */ - #define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0) - #define TX_BD_SHORT_FLAGS_SFT 6 - uint16_t flags_type; - + #define TX_BD_SHORT_FLAGS_PACKET_END UINT32_C(0x40) + /* + * If set to 1, the device will not generate a completion for + * this transmit packet unless there is an error in it's + * processing. If this bit is set to 0, then the packet will be + * completed normally. This bit must be valid only on the first + * BD of a packet. + */ + #define TX_BD_SHORT_FLAGS_NO_CMPL UINT32_C(0x80) + /* + * This value indicates how many 16B BD locations are consumed + * in the ring by this packet. A value of 1 indicates that this + * BD is the only BD (and that the it is a short BD). A value of + * 3 indicates either 3 short BDs or 1 long BD and one short BD + * in the packet. A value of 0 indicates that there are 32 BD + * locations in the packet (the maximum). This field is valid + * only on the first BD of a packet. + */ + #define TX_BD_SHORT_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) + #define TX_BD_SHORT_FLAGS_BD_CNT_SFT 8 + /* + * This value is a hint for the length of the entire packet. It + * is used by the chip to optimize internal processing. The + * packet will be dropped if the hint is too short. This field + * is valid only on the first BD of a packet. + */ + #define TX_BD_SHORT_FLAGS_LHINT_MASK UINT32_C(0x6000) + #define TX_BD_SHORT_FLAGS_LHINT_SFT 13 + /* indicates packet length < 512B */ + #define TX_BD_SHORT_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) + /* indicates 512 <= packet length < 1KB */ + #define TX_BD_SHORT_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) + /* indicates 1KB <= packet length < 2KB */ + #define TX_BD_SHORT_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) + /* indicates packet length >= 2KB */ + #define TX_BD_SHORT_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) + #define TX_BD_SHORT_FLAGS_LHINT_LAST TX_BD_SHORT_FLAGS_LHINT_GTE2K /* - * This is the length of the host physical buffer this BD describes in - * bytes. This field must be valid on all BDs of a packet. + * If set to 1, the device immediately updates the Send Consumer + * Index after the buffer associated with this descriptor has + * been transferred via DMA to NIC memory from host memory. An + * interrupt may or may not be generated according to the state + * of the interrupt avoidance mechanisms. If this bit is set to + * 0, then the Consumer Index is only updated as soon as one of + * the host interrupt coalescing conditions has been met. This + * bit must be valid on the first BD of a packet. */ + #define TX_BD_SHORT_FLAGS_COAL_NOW UINT32_C(0x8000) + /* + * All bits in this field must be valid on the first BD of a + * packet. Only the packet_end bit must be valid for the + * remaining BDs of a packet. + */ + #define TX_BD_SHORT_FLAGS_MASK UINT32_C(0xffc0) + #define TX_BD_SHORT_FLAGS_SFT 6 uint16_t len; /* - * The opaque data field is pass through to the completion and can be - * used for any data that the driver wants to associate with the - * transmit BD. This field must be valid on the first BD of a packet. + * This is the length of the host physical buffer this BD + * describes in bytes. This field must be valid on all BDs of a + * packet. */ uint32_t opaque; - /* - * This is the host physical address for the portion of the packet - * described by this TX BD. This value must be valid on all BDs of a - * packet. + * The opaque data field is pass through to the completion and + * can be used for any data that the driver wants to associate + * with the transmit BD. This field must be valid on the first + * BD of a packet. */ uint64_t addr; + /* + * This is the host physical address for the portion of the + * packet described by this TX BD. This value must be valid on + * all BDs of a packet. + */ } __attribute__((packed)); /* Long TX BD (32 bytes split to 2 16-byte struct) */ struct tx_bd_long { + uint16_t flags_type; /* - * All bits in this field must be valid on the first BD of a packet. - * Only the packet_end bit must be valid for the remaining BDs of a - * packet. + * All bits in this field must be valid on the first BD of a + * packet. Only the packet_end bit must be valid for the + * remaining BDs of a packet. */ /* This value identifies the type of buffer descriptor. */ - #define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f) - #define TX_BD_LONG_TYPE_SFT 0 - /* - * Indicates that this BD is 32B long and is used for normal L2 - * packet transmission. - */ - #define TX_BD_LONG_TYPE_TX_BD_LONG (UINT32_C(0x10) << 0) - /* - * If set to 1, the packet ends with the data in the buffer pointed to - * by this descriptor. This flag must be valid on every BD. - */ - #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) - /* - * If set to 1, the device will not generate a completion for this - * transmit packet unless there is an error in it's processing. If this - * bit is set to 0, then the packet will be completed normally. This bit - * must be valid only on the first BD of a packet. - */ - #define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80) - /* - * This value indicates how many 16B BD locations are consumed in the - * ring by this packet. A value of 1 indicates that this BD is the only - * BD (and that the it is a short BD). A value of 3 indicates either 3 - * short BDs or 1 long BD and one short BD in the packet. A value of 0 - * indicates that there are 32 BD locations in the packet (the maximum). - * This field is valid only on the first BD of a packet. - */ - #define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) - #define TX_BD_LONG_FLAGS_BD_CNT_SFT 8 - /* - * This value is a hint for the length of the entire packet. It is used - * by the chip to optimize internal processing. The packet will be - * dropped if the hint is too short. This field is valid only on the - * first BD of a packet. - */ - #define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000) - #define TX_BD_LONG_FLAGS_LHINT_SFT 13 - /* indicates packet length < 512B */ - #define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) - /* indicates 512 <= packet length < 1KB */ - #define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) - /* indicates 1KB <= packet length < 2KB */ - #define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) - /* indicates packet length >= 2KB */ - #define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) - #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K + #define TX_BD_LONG_TYPE_MASK UINT32_C(0x3f) + #define TX_BD_LONG_TYPE_SFT 0 /* - * If set to 1, the device immediately updates the Send Consumer Index - * after the buffer associated with this descriptor has been transferred - * via DMA to NIC memory from host memory. An interrupt may or may not - * be generated according to the state of the interrupt avoidance - * mechanisms. If this bit is set to 0, then the Consumer Index is only - * updated as soon as one of the host interrupt coalescing conditions - * has been met. This bit must be valid on the first BD of a packet. + * Indicates that this BD is 32B long and is + * used for normal L2 packet transmission. */ - #define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000) + #define TX_BD_LONG_TYPE_TX_BD_LONG UINT32_C(0x10) /* - * All bits in this field must be valid on the first BD of a packet. - * Only the packet_end bit must be valid for the remaining BDs of a - * packet. + * If set to 1, the packet ends with the data in the buffer + * pointed to by this descriptor. This flag must be valid on + * every BD. */ - #define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0) - #define TX_BD_LONG_FLAGS_SFT 6 - uint16_t flags_type; - + #define TX_BD_LONG_FLAGS_PACKET_END UINT32_C(0x40) + /* + * If set to 1, the device will not generate a completion for + * this transmit packet unless there is an error in it's + * processing. If this bit is set to 0, then the packet will be + * completed normally. This bit must be valid only on the first + * BD of a packet. + */ + #define TX_BD_LONG_FLAGS_NO_CMPL UINT32_C(0x80) + /* + * This value indicates how many 16B BD locations are consumed + * in the ring by this packet. A value of 1 indicates that this + * BD is the only BD (and that the it is a short BD). A value of + * 3 indicates either 3 short BDs or 1 long BD and one short BD + * in the packet. A value of 0 indicates that there are 32 BD + * locations in the packet (the maximum). This field is valid + * only on the first BD of a packet. + */ + #define TX_BD_LONG_FLAGS_BD_CNT_MASK UINT32_C(0x1f00) + #define TX_BD_LONG_FLAGS_BD_CNT_SFT 8 + /* + * This value is a hint for the length of the entire packet. It + * is used by the chip to optimize internal processing. The + * packet will be dropped if the hint is too short. This field + * is valid only on the first BD of a packet. + */ + #define TX_BD_LONG_FLAGS_LHINT_MASK UINT32_C(0x6000) + #define TX_BD_LONG_FLAGS_LHINT_SFT 13 + /* indicates packet length < 512B */ + #define TX_BD_LONG_FLAGS_LHINT_LT512 (UINT32_C(0x0) << 13) + /* indicates 512 <= packet length < 1KB */ + #define TX_BD_LONG_FLAGS_LHINT_LT1K (UINT32_C(0x1) << 13) + /* indicates 1KB <= packet length < 2KB */ + #define TX_BD_LONG_FLAGS_LHINT_LT2K (UINT32_C(0x2) << 13) + /* indicates packet length >= 2KB */ + #define TX_BD_LONG_FLAGS_LHINT_GTE2K (UINT32_C(0x3) << 13) + #define TX_BD_LONG_FLAGS_LHINT_LAST TX_BD_LONG_FLAGS_LHINT_GTE2K + /* + * If set to 1, the device immediately updates the Send Consumer + * Index after the buffer associated with this descriptor has + * been transferred via DMA to NIC memory from host memory. An + * interrupt may or may not be generated according to the state + * of the interrupt avoidance mechanisms. If this bit is set to + * 0, then the Consumer Index is only updated as soon as one of + * the host interrupt coalescing conditions has been met. This + * bit must be valid on the first BD of a packet. + */ + #define TX_BD_LONG_FLAGS_COAL_NOW UINT32_C(0x8000) /* - * This is the length of the host physical buffer this BD describes in - * bytes. This field must be valid on all BDs of a packet. + * All bits in this field must be valid on the first BD of a + * packet. Only the packet_end bit must be valid for the + * remaining BDs of a packet. */ + #define TX_BD_LONG_FLAGS_MASK UINT32_C(0xffc0) + #define TX_BD_LONG_FLAGS_SFT 6 uint16_t len; - /* - * The opaque data field is pass through to the completion and can be - * used for any data that the driver wants to associate with the - * transmit BD. This field must be valid on the first BD of a packet. + * This is the length of the host physical buffer this BD + * describes in bytes. This field must be valid on all BDs of a + * packet. */ uint32_t opaque; - /* - * This is the host physical address for the portion of the packet - * described by this TX BD. This value must be valid on all BDs of a - * packet. + * The opaque data field is pass through to the completion and + * can be used for any data that the driver wants to associate + * with the transmit BD. This field must be valid on the first + * BD of a packet. */ uint64_t addr; + /* + * This is the host physical address for the portion of the + * packet described by this TX BD. This value must be valid on + * all BDs of a packet. + */ } __attribute__((packed)); /* last 16 bytes of Long TX BD */ - struct tx_bd_long_hi { + uint16_t lflags; /* - * All bits in this field must be valid on the first BD of a packet. - * Their value on other BDs of the packet will be ignored. + * All bits in this field must be valid on the first BD of a + * packet. Their value on other BDs of the packet will be + * ignored. */ /* - * If set to 1, the controller replaces the TCP/UPD checksum fields of - * normal TCP/UPD checksum, or the inner TCP/UDP checksum field of the - * encapsulated TCP/UDP packets with the hardware calculated TCP/UDP - * checksum for the packet associated with this descriptor. This bit - * must be valid on the first BD of a packet. + * If set to 1, the controller replaces the TCP/UPD checksum + * fields of normal TCP/UPD checksum, or the inner TCP/UDP + * checksum field of the encapsulated TCP/UDP packets with the + * hardware calculated TCP/UDP checksum for the packet + * associated with this descriptor. The flag is ignored if the + * LSO flag is set. This bit must be valid on the first BD of a + * packet. */ #define TX_BD_LONG_LFLAGS_TCP_UDP_CHKSUM UINT32_C(0x1) /* - * If set to 1, the controller replaces the IP checksum of the normal - * packets, or the inner IP checksum of the encapsulated packets with - * the hardware calculated IP checksum for the packet associated with - * this descriptor. This bit must be valid on the first BD of a packet. - */ - #define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2) - /* - * If set to 1, the controller will not append an Ethernet CRC to the - * end of the frame. This bit must be valid on the first BD of a packet. - * Packet must be 64B or longer when this flag is set. It is not useful - * to use this bit with any form of TX offload such as CSO or LSO. The - * intent is that the packet from the host already has a valid Ethernet - * CRC on the packet. - */ - #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) - /* - * If set to 1, the device will record the time at which the packet was - * actually transmitted at the TX MAC. This bit must be valid on the - * first BD of a packet. - */ - #define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8) - /* - * If set to 1, The controller replaces the tunnel IP checksum field - * with hardware calculated IP checksum for the IP header of the packet - * associated with this descriptor. In case of VXLAN, the controller - * also replaces the outer header UDP checksum with hardware calculated - * UDP checksum for the packet associated with this descriptor. - */ - #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) - /* - * If set to 1, the device will treat this packet with LSO(Large Send - * Offload) processing for both normal or encapsulated packets, which is - * a form of TCP segmentation. When this bit is 1, the hdr_size and mss - * fields must be valid. The driver doesn't need to set t_ip_chksum, - * ip_chksum, and tcp_udp_chksum flags since the controller will replace - * the appropriate checksum fields for segmented packets. When this bit - * is 1, the hdr_size and mss fields must be valid. - */ - #define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20) - /* - * If set to zero when LSO is '1', then the IPID will be treated as a - * 16b number and will be wrapped if it exceeds a value of 0xffff. If - * set to one when LSO is '1', then the IPID will be treated as a 15b - * number and will be wrapped if it exceeds a value 0f 0x7fff. - */ - #define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40) - /* - * If set to zero when LSO is '1', then the IPID of the tunnel IP header - * will not be modified during LSO operations. If set to one when LSO is - * '1', then the IPID of the tunnel IP header will be incremented for - * each subsequent segment of an LSO operation. - */ - #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) - /* - * If set to '1', then the RoCE ICRC will be appended to the packet. - * Packet must be a valid RoCE format packet. - */ - #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) - /* - * If set to '1', then the FCoE CRC will be appended to the packet. - * Packet must be a valid FCoE format packet. - */ - #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) - uint16_t lflags; - - /* - * When LSO is '1', this field must contain the offset of the TCP - * payload from the beginning of the packet in as 16b words. In case of - * encapsulated/tunneling packet, this field contains the offset of the - * inner TCP payload from beginning of the packet as 16-bit words. This - * value must be valid on the first BD of a packet. - */ - #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) - #define TX_BD_LONG_HDR_SIZE_SFT 0 + * If set to 1, the controller replaces the IP checksum of the + * normal packets, or the inner IP checksum of the encapsulated + * packets with the hardware calculated IP checksum for the + * packet associated with this descriptor. This bit must be + * valid on the first BD of a packet. + */ + #define TX_BD_LONG_LFLAGS_IP_CHKSUM UINT32_C(0x2) + /* + * If set to 1, the controller will not append an Ethernet CRC + * to the end of the frame. This bit must be valid on the first + * BD of a packet. Packet must be 64B or longer when this flag + * is set. It is not useful to use this bit with any form of TX + * offload such as CSO or LSO. The intent is that the packet + * from the host already has a valid Ethernet CRC on the packet. + */ + #define TX_BD_LONG_LFLAGS_NOCRC UINT32_C(0x4) + /* + * If set to 1, the device will record the time at which the + * packet was actually transmitted at the TX MAC. This bit must + * be valid on the first BD of a packet. + */ + #define TX_BD_LONG_LFLAGS_STAMP UINT32_C(0x8) + /* + * If set to 1, The controller replaces the tunnel IP checksum + * field with hardware calculated IP checksum for the IP header + * of the packet associated with this descriptor. For outer UDP + * checksum, global outer UDP checksum TE_NIC register needs to + * be enabled. If the global outer UDP checksum TE_NIC register + * bit is set, outer UDP checksum will be calculated for the + * following cases: 1. Packets with tcp_udp_chksum flag set to + * offload checksum for inner packet AND the inner packet is + * TCP/UDP. If the inner packet is ICMP for example (non- + * TCP/UDP), even if the tcp_udp_chksum is set, the outer UDP + * checksum will not be calculated. 2. Packets with lso flag set + * which implies inner TCP checksum calculation as part of LSO + * operation. + */ + #define TX_BD_LONG_LFLAGS_T_IP_CHKSUM UINT32_C(0x10) + /* + * If set to 1, the device will treat this packet with LSO(Large + * Send Offload) processing for both normal or encapsulated + * packets, which is a form of TCP segmentation. When this bit + * is 1, the hdr_size and mss fields must be valid. The driver + * doesn't need to set t_ip_chksum, ip_chksum, and + * tcp_udp_chksum flags since the controller will replace the + * appropriate checksum fields for segmented packets. When this + * bit is 1, the hdr_size and mss fields must be valid. + */ + #define TX_BD_LONG_LFLAGS_LSO UINT32_C(0x20) + /* + * If set to zero when LSO is '1', then the IPID will be treated + * as a 16b number and will be wrapped if it exceeds a value of + * 0xffff. If set to one when LSO is '1', then the IPID will be + * treated as a 15b number and will be wrapped if it exceeds a + * value 0f 0x7fff. + */ + #define TX_BD_LONG_LFLAGS_IPID_FMT UINT32_C(0x40) + /* + * If set to zero when LSO is '1', then the IPID of the tunnel + * IP header will not be modified during LSO operations. If set + * to one when LSO is '1', then the IPID of the tunnel IP header + * will be incremented for each subsequent segment of an LSO + * operation. The flag is ignored if the LSO packet is a normal + * (non-tunneled) TCP packet. + */ + #define TX_BD_LONG_LFLAGS_T_IPID UINT32_C(0x80) + /* + * If set to '1', then the RoCE ICRC will be appended to the + * packet. Packet must be a valid RoCE format packet. + */ + #define TX_BD_LONG_LFLAGS_ROCE_CRC UINT32_C(0x100) + /* + * If set to '1', then the FCoE CRC will be appended to the + * packet. Packet must be a valid FCoE format packet. + */ + #define TX_BD_LONG_LFLAGS_FCOE_CRC UINT32_C(0x200) uint16_t hdr_size; - /* - * This is the MSS value that will be used to do the LSO processing. The - * value is the length in bytes of the TCP payload for each segment - * generated by the LSO operation. This value must be valid on the first + * When LSO is '1', this field must contain the offset of the + * TCP payload from the beginning of the packet in as 16b words. + * In case of encapsulated/tunneling packet, this field contains + * the offset of the inner TCP payload from beginning of the + * packet as 16-bit words. This value must be valid on the first * BD of a packet. */ - #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) - #define TX_BD_LONG_MSS_SFT 0 + #define TX_BD_LONG_HDR_SIZE_MASK UINT32_C(0x1ff) + #define TX_BD_LONG_HDR_SIZE_SFT 0 uint32_t mss; - - uint16_t unused_2; - /* - * This value selects a CFA action to perform on the packet. Set this - * value to zero if no CFA action is desired. This value must be valid - * on the first BD of a packet. + * This is the MSS value that will be used to do the LSO + * processing. The value is the length in bytes of the TCP + * payload for each segment generated by the LSO operation. This + * value must be valid on the first BD of a packet. */ + #define TX_BD_LONG_MSS_MASK UINT32_C(0x7fff) + #define TX_BD_LONG_MSS_SFT 0 + uint16_t unused_2; uint16_t cfa_action; - /* - * This value is action meta-data that defines CFA edit operations that - * are done in addition to any action editing. + * This value selects a CFA action to perform on the packet. Set + * this value to zero if no CFA action is desired. This value + * must be valid on the first BD of a packet. + */ + uint32_t cfa_meta; + /* + * This value is action meta-data that defines CFA edit + * operations that are done in addition to any action editing. */ /* When key=1, This is the VLAN tag VID value. */ #define TX_BD_LONG_CFA_META_VLAN_VID_MASK UINT32_C(0xfff) #define TX_BD_LONG_CFA_META_VLAN_VID_SFT 0 /* When key=1, This is the VLAN tag DE value. */ - #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000) + #define TX_BD_LONG_CFA_META_VLAN_DE UINT32_C(0x1000) /* When key=1, This is the VLAN tag PRI value. */ #define TX_BD_LONG_CFA_META_VLAN_PRI_MASK UINT32_C(0xe000) #define TX_BD_LONG_CFA_META_VLAN_PRI_SFT 13 /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_MASK UINT32_C(0x70000) #define TX_BD_LONG_CFA_META_VLAN_TPID_SFT 16 - /* 0x88a8 */ + /* 0x88a8 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID88A8 (UINT32_C(0x0) << 16) - /* 0x8100 */ + /* 0x8100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID8100 (UINT32_C(0x1) << 16) - /* 0x9100 */ + /* 0x9100 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9100 (UINT32_C(0x2) << 16) - /* 0x9200 */ + /* 0x9200 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9200 (UINT32_C(0x3) << 16) - /* 0x9300 */ + /* 0x9300 */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPID9300 (UINT32_C(0x4) << 16) - /* Value programmed in CFA VLANTPID register. */ + /* Value programmed in CFA VLANTPID register. */ #define TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG (UINT32_C(0x5) << 16) - #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \ - TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG + #define TX_BD_LONG_CFA_META_VLAN_TPID_LAST \ + TX_BD_LONG_CFA_META_VLAN_TPID_TPIDCFG /* When key=1, This is the VLAN tag TPID select value. */ #define TX_BD_LONG_CFA_META_VLAN_RESERVED_MASK UINT32_C(0xff80000) #define TX_BD_LONG_CFA_META_VLAN_RESERVED_SFT 19 /* - * This field identifies the type of edit to be performed on the packet. - * This value must be valid on the first BD of a packet. + * This field identifies the type of edit to be performed on the + * packet. This value must be valid on the first BD of a packet. + */ + #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000) + #define TX_BD_LONG_CFA_META_KEY_SFT 28 + /* No editing */ + #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28) + /* + * - meta[17:16] - TPID select value (0 = + * 0x8100). - meta[15:12] - PRI/DE value. - + * meta[11:0] - VID value. */ - #define TX_BD_LONG_CFA_META_KEY_MASK UINT32_C(0xf0000000) - #define TX_BD_LONG_CFA_META_KEY_SFT 28 - /* No editing */ - #define TX_BD_LONG_CFA_META_KEY_NONE (UINT32_C(0x0) << 28) - /* - * - meta[17:16] - TPID select value (0 = 0x8100). - meta[15:12] - * - PRI/DE value. - meta[11:0] - VID value. - */ #define TX_BD_LONG_CFA_META_KEY_VLAN_TAG (UINT32_C(0x1) << 28) #define TX_BD_LONG_CFA_META_KEY_LAST TX_BD_LONG_CFA_META_KEY_VLAN_TAG - uint32_t cfa_meta; } __attribute__((packed)); /* RX Producer Packet BD (16 bytes) */ struct rx_prod_pkt_bd { + uint16_t flags_type; /* This value identifies the type of buffer descriptor. */ - #define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f) - #define RX_PROD_PKT_BD_TYPE_SFT 0 - /* - * Indicates that this BD is 16B long and is an RX Producer (ie. - * empty) buffer descriptor. - */ - #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT (UINT32_C(0x4) << 0) + #define RX_PROD_PKT_BD_TYPE_MASK UINT32_C(0x3f) + #define RX_PROD_PKT_BD_TYPE_SFT 0 /* - * If set to 1, the packet will be placed at the address plus 2B. The 2 - * Bytes of padding will be written as zero. + * Indicates that this BD is 16B long and is an + * RX Producer (ie. empty) buffer descriptor. */ + #define RX_PROD_PKT_BD_TYPE_RX_PROD_PKT UINT32_C(0x4) /* - * This is intended to be used when the host buffer is cache-line - * aligned to produce packets that are easy to parse in host memory - * while still allowing writes to be cache line aligned. + * If set to 1, the packet will be placed at the address plus + * 2B. The 2 Bytes of padding will be written as zero. */ - #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* - * If set to 1, the packet write will be padded out to the nearest - * cache-line with zero value padding. + * This is intended to be used when the host buffer is cache- + * line aligned to produce packets that are easy to parse in + * host memory while still allowing writes to be cache line + * aligned. */ + #define RX_PROD_PKT_BD_FLAGS_SOP_PAD UINT32_C(0x40) /* - * If receive buffers start/end on cache-line boundaries, this feature - * will ensure that all data writes on the PCI bus start/end on cache - * line boundaries. + * If set to 1, the packet write will be padded out to the + * nearest cache-line with zero value padding. */ - #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) /* - * This value is the number of additional buffers in the ring that - * describe the buffer space to be consumed for the this packet. If the - * value is zero, then the packet must fit within the space described by - * this BD. If this value is 1 or more, it indicates how many additional - * "buffer" BDs are in the ring immediately following this BD to be used - * for the same network packet. Even if the packet to be placed does not - * need all the additional buffers, they will be consumed anyway. + * If receive buffers start/end on cache-line boundaries, this + * feature will ensure that all data writes on the PCI bus + * start/end on cache line boundaries. + */ + #define RX_PROD_PKT_BD_FLAGS_EOP_PAD UINT32_C(0x80) + /* + * This value is the number of additional buffers in the ring + * that describe the buffer space to be consumed for the this + * packet. If the value is zero, then the packet must fit within + * the space described by this BD. If this value is 1 or more, + * it indicates how many additional "buffer" BDs are in the ring + * immediately following this BD to be used for the same network + * packet. Even if the packet to be placed does not need all the + * additional buffers, they will be consumed anyway. */ #define RX_PROD_PKT_BD_FLAGS_BUFFERS_MASK UINT32_C(0x300) #define RX_PROD_PKT_BD_FLAGS_BUFFERS_SFT 8 - #define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0) - #define RX_PROD_PKT_BD_FLAGS_SFT 6 - uint16_t flags_type; - + #define RX_PROD_PKT_BD_FLAGS_MASK UINT32_C(0xffc0) + #define RX_PROD_PKT_BD_FLAGS_SFT 6 + uint16_t len; /* - * This is the length in Bytes of the host physical buffer where data - * for the packet may be placed in host memory. + * This is the length in Bytes of the host physical buffer where + * data for the packet may be placed in host memory. */ /* - * While this is a Byte resolution value, it is often advantageous to - * ensure that the buffers provided end on a host cache line. + * While this is a Byte resolution value, it is often + * advantageous to ensure that the buffers provided end on a + * host cache line. */ - uint16_t len; - + uint32_t opaque; /* - * The opaque data field is pass through to the completion and can be - * used for any data that the driver wants to associate with this - * receive buffer set. + * The opaque data field is pass through to the completion and + * can be used for any data that the driver wants to associate + * with this receive buffer set. */ - uint32_t opaque; - + uint64_t addr; /* - * This is the host physical address where data for the packet may by - * placed in host memory. + * This is the host physical address where data for the packet + * may by placed in host memory. */ /* - * While this is a Byte resolution value, it is often advantageous to - * ensure that the buffers provide start on a host cache line. + * While this is a Byte resolution value, it is often + * advantageous to ensure that the buffers provide start on a + * host cache line. */ - uint64_t addr; } __attribute__((packed)); /* Completion Ring Structures */