From: Fiona Trahe Date: Fri, 10 Aug 2018 14:10:53 +0000 (+0100) Subject: doc: describe qat build config options X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=7ce27b9e5ce3556576070ceee6da906671c86e3d;p=dpdk.git doc: describe qat build config options Added description of the build configuration options for QAT. Signed-off-by: Fiona Trahe Acked-by: Tomasz Jozwiak --- diff --git a/doc/guides/cryptodevs/qat.rst b/doc/guides/cryptodevs/qat.rst index a352dabcd9..67b84b3e2c 100644 --- a/doc/guides/cryptodevs/qat.rst +++ b/doc/guides/cryptodevs/qat.rst @@ -142,6 +142,37 @@ Quick instructions for QAT compressdev PMD are as follows: make +Build Configuration +~~~~~~~~~~~~~~~~~~~ + +These are the build configuration options affecting QAT, and their default values: + +.. code-block:: console + + CONFIG_RTE_LIBRTE_PMD_QAT=y + CONFIG_RTE_LIBRTE_PMD_QAT_SYM=n + CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES=48 + CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS=16 + +CONFIG_RTE_LIBRTE_PMD_QAT must be enabled for any QAT PMD to be built. + +The QAT cryptodev PMD has an external dependency on libcrypto, so is not +built by default. CONFIG_RTE_LIBRTE_PMD_QAT_SYM should be enabled to build it. + +The QAT compressdev PMD has no external dependencies, so needs no configuration +options and is built by default. + +The number of VFs per PF varies - see table below. If multiple QAT packages are +installed on a platform then CONFIG_RTE_PMD_QAT_MAX_PCI_DEVICES should be +adjusted to the number of VFs which the QAT common code will need to handle. +Note, there is a separate config item for max cryptodevs CONFIG_RTE_CRYPTO_MAX_DEVS, +if necessary this should be adjusted to handle the total of QAT and other devices +which the process will use. + +QAT allocates internal structures to handle SGLs. For the compression service +CONFIG_RTE_PMD_QAT_COMP_SGL_MAX_SEGMENTS can be changed if more segments are needed. +An extra (max_inflight_ops x 16) bytes per queue_pair will be used for every increment. + Device and driver naming ~~~~~~~~~~~~~~~~~~~~~~~~