From: Alejandro Lucero <alejandro.lucero@netronome.com>
Date: Tue, 20 Dec 2016 13:22:00 +0000 (+0000)
Subject: net/nfp: report link speed using hardware info
X-Git-Tag: spdx-start~4962
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=8245355acbbb19f32283efb5d90802774e2292e8;p=dpdk.git

net/nfp: report link speed using hardware info

Previous reported speed was hardcoded because there was not firmware
support for getting this information. This change needs also to support
old firmware versions, but instead of the previous hardcoded report, no
speed is reported to the user avoiding to give the wrong speed when link
is not configured to 40G.

Signed-off-by: Alejandro Lucero <alejandro.lucero@netronome.com>
---

diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c
index da4bf97076..85923297d0 100644
--- a/drivers/net/nfp/nfp_net.c
+++ b/drivers/net/nfp/nfp_net.c
@@ -818,6 +818,17 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 	struct rte_eth_link link, old;
 	uint32_t nn_link_status;
 
+	static const uint32_t ls_to_ethtool[] = {
+		[NFP_NET_CFG_STS_LINK_RATE_UNSUPPORTED] = ETH_SPEED_NUM_NONE,
+		[NFP_NET_CFG_STS_LINK_RATE_UNKNOWN]     = ETH_SPEED_NUM_NONE,
+		[NFP_NET_CFG_STS_LINK_RATE_1G]          = ETH_SPEED_NUM_1G,
+		[NFP_NET_CFG_STS_LINK_RATE_10G]         = ETH_SPEED_NUM_10G,
+		[NFP_NET_CFG_STS_LINK_RATE_25G]         = ETH_SPEED_NUM_25G,
+		[NFP_NET_CFG_STS_LINK_RATE_40G]         = ETH_SPEED_NUM_40G,
+		[NFP_NET_CFG_STS_LINK_RATE_50G]         = ETH_SPEED_NUM_50G,
+		[NFP_NET_CFG_STS_LINK_RATE_100G]        = ETH_SPEED_NUM_100G,
+	};
+
 	PMD_DRV_LOG(DEBUG, "Link update\n");
 
 	hw = NFP_NET_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -833,8 +844,21 @@ nfp_net_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complete)
 		link.link_status = ETH_LINK_UP;
 
 	link.link_duplex = ETH_LINK_FULL_DUPLEX;
-	/* Other cards can limit the tx and rx rate per VF */
-	link.link_speed = ETH_SPEED_NUM_40G;
+
+	nn_link_status = (nn_link_status >> NFP_NET_CFG_STS_LINK_RATE_SHIFT) &
+			 NFP_NET_CFG_STS_LINK_RATE_MASK;
+
+	if ((NFD_CFG_MAJOR_VERSION_of(hw->ver) < 4) ||
+	    ((NFD_CFG_MINOR_VERSION_of(hw->ver) == 4) &&
+	    (NFD_CFG_MINOR_VERSION_of(hw->ver) == 0)))
+		/* We really do not know the speed wil old firmware */
+		link.link_speed = ETH_SPEED_NUM_NONE;
+	else {
+		if (nn_link_status >= RTE_DIM(ls_to_ethtool))
+			link.link_speed = ETH_SPEED_NUM_NONE;
+		else
+			link.link_speed = ls_to_ethtool[nn_link_status];
+	}
 
 	if (old.link_status != link.link_status) {
 		nfp_net_dev_atomic_write_link_status(dev, &link);
diff --git a/drivers/net/nfp/nfp_net_ctrl.h b/drivers/net/nfp/nfp_net_ctrl.h
index fce8251523..426402b218 100644
--- a/drivers/net/nfp/nfp_net_ctrl.h
+++ b/drivers/net/nfp/nfp_net_ctrl.h
@@ -157,6 +157,17 @@
 #define   NFP_NET_CFG_VERSION_MINOR(x)    (((x) & 0xff) <<  0)
 #define NFP_NET_CFG_STS                 0x0034
 #define   NFP_NET_CFG_STS_LINK            (0x1 << 0) /* Link up or down */
+/* Link rate */
+#define   NFP_NET_CFG_STS_LINK_RATE_SHIFT 1
+#define   NFP_NET_CFG_STS_LINK_RATE_MASK  0xF
+#define   NFP_NET_CFG_STS_LINK_RATE_UNSUPPORTED   0
+#define   NFP_NET_CFG_STS_LINK_RATE_UNKNOWN       1
+#define   NFP_NET_CFG_STS_LINK_RATE_1G            2
+#define   NFP_NET_CFG_STS_LINK_RATE_10G           3
+#define   NFP_NET_CFG_STS_LINK_RATE_25G           4
+#define   NFP_NET_CFG_STS_LINK_RATE_40G           5
+#define   NFP_NET_CFG_STS_LINK_RATE_50G           6
+#define   NFP_NET_CFG_STS_LINK_RATE_100G          7
 #define NFP_NET_CFG_CAP                 0x0038
 #define NFP_NET_CFG_MAX_TXRINGS         0x003c
 #define NFP_NET_CFG_MAX_RXRINGS         0x0040