From: zer0 <zer0@carbon.local>
Date: Fri, 7 May 2010 23:00:17 +0000 (+0200)
Subject: FIFOs exported
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=853564b60131699e48f52a2c5d46db825f6b878c;p=aversive.git

FIFOs exported
---

diff --git a/projects/microb2010/mainboard/ax12_user.c b/projects/microb2010/mainboard/ax12_user.c
index 6bb8129..880f160 100644
--- a/projects/microb2010/mainboard/ax12_user.c
+++ b/projects/microb2010/mainboard/ax12_user.c
@@ -89,7 +89,6 @@
 #ifndef HOST_VERSION
 
 static volatile uint8_t ax12_state = AX12_STATE_READ;
-extern volatile struct cirbuf g_tx_fifo[]; /* uart fifo */
 static volatile uint8_t ax12_nsent = 0;
 
 /* Called by ax12 module to send a character on serial line. Count the
diff --git a/projects/microb2010/mainboard/uart_config.h b/projects/microb2010/mainboard/uart_config.h
index 514d1e9..dc6117a 100644
--- a/projects/microb2010/mainboard/uart_config.h
+++ b/projects/microb2010/mainboard/uart_config.h
@@ -1,6 +1,6 @@
-/*  
+/*
  *  Copyright Droids Corporation, Microb Technology, Eirbot (2005)
- * 
+ *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
  *  the Free Software Foundation; either version 2 of the License, or
@@ -27,66 +27,62 @@
 #define UART_CONFIG_H
 
 /*
- * UART1 definitions 
+ * UART0 definitions
  */
 
-/* compile uart1 fonctions, undefine it to pass compilation */
-#define UART1_COMPILE  
+/* compile uart0 fonctions, undefine it to pass compilation */
+#define UART0_COMPILE
 
-/* enable uart1 if == 1, disable if == 0 */
-#define UART1_ENABLED  1
+/* enable uart0 if == 1, disable if == 0 */
+#define UART0_ENABLED  1
 
-/* enable uart1 interrupts if == 1, disable if == 0 */
-#define UART1_INTERRUPT_ENABLED  1
+/* enable uart0 interrupts if == 1, disable if == 0 */
+#define UART0_INTERRUPT_ENABLED  1
 
-#define UART1_BAUDRATE 57600
+#define UART0_BAUDRATE 57600
 
-/* 
- * if you enable this, the maximum baudrate you can reach is 
- * higher, but the precision is lower. 
+/*
+ * if you enable this, the maximum baudrate you can reach is
+ * higher, but the precision is lower.
  */
-#define UART1_USE_DOUBLE_SPEED 1
-
-#define UART1_RX_FIFO_SIZE 64
-#define UART1_TX_FIFO_SIZE 127
-#define UART1_NBITS 8
+#define UART0_USE_DOUBLE_SPEED 1
 
-#define UART1_PARITY UART_PARTITY_NONE
+#define UART0_RX_FIFO_SIZE 64
+#define UART0_TX_FIFO_SIZE 64
+#define UART0_NBITS 8
 
-#define UART1_STOP_BIT UART_STOP_BITS_1
+#define UART0_PARITY UART_PARTITY_NONE
 
+#define UART0_STOP_BIT UART_STOP_BITS_1
 
 /*
- * UART3 definitions 
+ * UART1 definitions
  */
 
-/* compile uart3 fonctions, undefine it to pass compilation */
-#define UART3_COMPILE  
+/* compile uart1 fonctions, undefine it to pass compilation */
+#define UART1_COMPILE
 
-/* enable uart3 if == 1, disable if == 0 */
-#define UART3_ENABLED  1
+/* enable uart1 if == 1, disable if == 0 */
+#define UART1_ENABLED  1
 
-/* enable uart3 interrupts if == 1, disable if == 0 */
-#define UART3_INTERRUPT_ENABLED  1
+/* enable uart1 interrupts if == 1, disable if == 0 */
+#define UART1_INTERRUPT_ENABLED  1
 
-#define UART3_BAUDRATE 57600
+#define UART1_BAUDRATE 57600
 
-/* 
- * if you enable this, the maximum baudrate you can reach is 
- * higher, but the precision is lower. 
+/*
+ * if you enable this, the maximum baudrate you can reach is
+ * higher, but the precision is lower.
  */
-#define UART3_USE_DOUBLE_SPEED 1
-
-#define UART3_RX_FIFO_SIZE 64
-#define UART3_TX_FIFO_SIZE 64
-#define UART3_NBITS 8
-
-#define UART3_PARITY UART_PARTITY_NONE
-
-#define UART3_STOP_BIT UART_STOP_BITS_1
+#define UART1_USE_DOUBLE_SPEED 1
 
+#define UART1_RX_FIFO_SIZE 64
+#define UART1_TX_FIFO_SIZE 127
+#define UART1_NBITS 8
 
+#define UART1_PARITY UART_PARTITY_NONE
 
+#define UART1_STOP_BIT UART_STOP_BITS_1
 
 /* .... same for uart 1, 2, 3 ... */