From: Parav Pandit Date: Mon, 27 Jul 2020 17:47:13 +0000 (+0300) Subject: common/mlx5: introduce layer for multiple class drivers X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=8a41f4deccc3;p=dpdk.git common/mlx5: introduce layer for multiple class drivers Add generic mlx5 PCI PMD layer as part of existing common_mlx5 module. This enables multiple classes (net, regex, vdpa) PMDs to be supported at same time. Signed-off-by: Parav Pandit Acked-by: Matan Azrad --- diff --git a/doc/guides/rel_notes/release_20_08.rst b/doc/guides/rel_notes/release_20_08.rst index d65f772505..01880b8954 100644 --- a/doc/guides/rel_notes/release_20_08.rst +++ b/doc/guides/rel_notes/release_20_08.rst @@ -124,10 +124,11 @@ New Features * Added support for VLAN push and pop flow actions. -* **Updated Mellanox mlx5 driver.** +* **Updated Mellanox mlx5 net driver and common layer.** Updated Mellanox mlx5 driver with new features and improvements, including: + * Added mlx5 PCI layer to share a PCI device among multiple PMDs. * Added new PMD devarg ``reclaim_mem_mode``. * Added new devarg ``lacp_by_user``. * Added support for eCPRI protocol offloading. diff --git a/drivers/Makefile b/drivers/Makefile index 1551272efa..7f06162dc4 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -8,8 +8,12 @@ DIRS-y += bus DEPDIRS-bus := common DIRS-y += mempool DEPDIRS-mempool := common bus +ifeq ($(findstring y,$(CONFIG_RTE_LIBRTE_MLX5_PMD)$(CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD)$(CONFIG_RTE_LIBRTE_MLX5_REGEX_PMD)),y) +DIRS-y += common/mlx5 +DEPDIRS-common/mlx5 := bus +endif DIRS-y += net -DEPDIRS-net := common bus mempool +DEPDIRS-net := common bus mempool common/mlx5 DIRS-$(CONFIG_RTE_LIBRTE_BBDEV) += baseband DEPDIRS-baseband := common bus mempool DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += crypto @@ -19,9 +23,9 @@ DEPDIRS-common/qat := bus mempool DIRS-$(CONFIG_RTE_LIBRTE_COMPRESSDEV) += compress DEPDIRS-compress := bus mempool DIRS-$(CONFIG_RTE_LIBRTE_REGEXDEV) += regex -DEPDIRS-regex := common bus +DEPDIRS-regex := common bus common/mlx5 DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += vdpa -DEPDIRS-vdpa := common bus mempool +DEPDIRS-vdpa := common bus mempool common/mlx5 DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += event DEPDIRS-event := common bus mempool net crypto DIRS-$(CONFIG_RTE_LIBRTE_RAWDEV) += raw diff --git a/drivers/common/Makefile b/drivers/common/Makefile index cbc71077cf..cfb6b4dc88 100644 --- a/drivers/common/Makefile +++ b/drivers/common/Makefile @@ -36,8 +36,4 @@ ifneq (,$(findstring y,$(IAVF-y))) DIRS-y += iavf endif -ifeq ($(findstring y,$(CONFIG_RTE_LIBRTE_MLX5_PMD)$(CONFIG_RTE_LIBRTE_MLX5_VDPA_PMD)$(CONFIG_RTE_LIBRTE_MLX5_REGEX_PMD)),y) -DIRS-y += mlx5 -endif - include $(RTE_SDK)/mk/rte.subdir.mk diff --git a/drivers/common/meson.build b/drivers/common/meson.build index 5db7e29b1d..9ed4c04ba5 100644 --- a/drivers/common/meson.build +++ b/drivers/common/meson.build @@ -6,6 +6,6 @@ if is_windows endif std_deps = ['eal'] -drivers = ['cpt', 'dpaax', 'iavf', 'mlx5', 'mvep', 'octeontx', 'octeontx2', 'qat'] +drivers = ['cpt', 'dpaax', 'iavf', 'mvep', 'octeontx', 'octeontx2', 'qat'] config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' driver_name_fmt = 'rte_common_@0@' diff --git a/drivers/common/mlx5/Makefile b/drivers/common/mlx5/Makefile index 6b89a6c855..4edd541042 100644 --- a/drivers/common/mlx5/Makefile +++ b/drivers/common/mlx5/Makefile @@ -22,6 +22,7 @@ SRCS-y += linux/mlx5_common_verbs.c SRCS-y += mlx5_common_mp.c SRCS-y += mlx5_common_mr.c SRCS-y += mlx5_malloc.c +SRCS-y += mlx5_common_pci.c ifeq ($(CONFIG_RTE_IBVERBS_LINK_DLOPEN),y) INSTALL-y-lib += $(LIB_GLUE) endif @@ -51,6 +52,7 @@ LDLIBS += -libverbs -lmlx5 endif LDLIBS += -lrte_eal -lrte_pci -lrte_kvargs -lrte_net +LDLIBS += -lrte_bus_pci # A few warnings cannot be avoided in external headers. CFLAGS += -Wno-error=cast-qual -UPEDANTIC diff --git a/drivers/common/mlx5/meson.build b/drivers/common/mlx5/meson.build index 70e2c1c324..8e5608703e 100644 --- a/drivers/common/mlx5/meson.build +++ b/drivers/common/mlx5/meson.build @@ -1,19 +1,22 @@ # SPDX-License-Identifier: BSD-3-Clause # Copyright 2019 Mellanox Technologies, Ltd -if not (is_linux or is_windows) +if not is_linux build = false - reason = 'only supported on Linux and Windows' + reason = 'only supported on Linux' subdir_done() endif -deps += ['hash', 'pci', 'net', 'eal', 'kvargs'] +config_flag_fmt = 'RTE_LIBRTE_@0@_COMMON' +driver_name_fmt = 'rte_common_@0@' +deps += ['hash', 'pci', 'bus_pci', 'net', 'eal', 'kvargs'] sources += files( 'mlx5_devx_cmds.c', 'mlx5_common.c', 'mlx5_common_mp.c', 'mlx5_common_mr.c', 'mlx5_malloc.c', + 'mlx5_common_pci.c', ) cflags_options = [ diff --git a/drivers/common/mlx5/mlx5_common.c b/drivers/common/mlx5/mlx5_common.c index 7b367e8f43..692c1c19d0 100644 --- a/drivers/common/mlx5/mlx5_common.c +++ b/drivers/common/mlx5/mlx5_common.c @@ -14,6 +14,7 @@ #include "mlx5_common_os.h" #include "mlx5_common_utils.h" #include "mlx5_malloc.h" +#include "mlx5_common_pci.h" int mlx5_common_logtype; @@ -100,6 +101,7 @@ mlx5_common_init(void) return; mlx5_glue_constructor(); + mlx5_common_pci_init(); mlx5_common_initialized = true; } diff --git a/drivers/common/mlx5/mlx5_common_pci.c b/drivers/common/mlx5/mlx5_common_pci.c new file mode 100644 index 0000000000..d4ff0392ff --- /dev/null +++ b/drivers/common/mlx5/mlx5_common_pci.c @@ -0,0 +1,540 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2020 Mellanox Technologies Ltd + */ + +#include +#include +#include "mlx5_common_utils.h" +#include "mlx5_common_pci.h" + +struct mlx5_pci_device { + struct rte_pci_device *pci_dev; + TAILQ_ENTRY(mlx5_pci_device) next; + uint32_t classes_loaded; +}; + +/* Head of list of drivers. */ +static TAILQ_HEAD(mlx5_pci_bus_drv_head, mlx5_pci_driver) drv_list = + TAILQ_HEAD_INITIALIZER(drv_list); + +/* Head of mlx5 pci devices. */ +static TAILQ_HEAD(mlx5_pci_devices_head, mlx5_pci_device) devices_list = + TAILQ_HEAD_INITIALIZER(devices_list); + +static const struct { + const char *name; + unsigned int driver_class; +} mlx5_classes[] = { + { .name = "vdpa", .driver_class = MLX5_CLASS_VDPA }, + { .name = "net", .driver_class = MLX5_CLASS_NET }, + { .name = "regex", .driver_class = MLX5_CLASS_REGEX }, +}; + +static const unsigned int mlx5_class_combinations[] = { + MLX5_CLASS_NET, + MLX5_CLASS_VDPA, + MLX5_CLASS_REGEX, + MLX5_CLASS_NET | MLX5_CLASS_REGEX, + MLX5_CLASS_VDPA | MLX5_CLASS_REGEX, + /* New class combination should be added here. */ +}; + +static int +class_name_to_value(const char *class_name) +{ + unsigned int i; + + for (i = 0; i < RTE_DIM(mlx5_classes); i++) { + if (strcmp(class_name, mlx5_classes[i].name) == 0) + return mlx5_classes[i].driver_class; + } + return -EINVAL; +} + +static struct mlx5_pci_driver * +driver_get(uint32_t class) +{ + struct mlx5_pci_driver *driver; + + TAILQ_FOREACH(driver, &drv_list, next) { + if (driver->driver_class == class) + return driver; + } + return NULL; +} + +static int +bus_cmdline_options_handler(__rte_unused const char *key, + const char *class_names, void *opaque) +{ + int *ret = opaque; + char *nstr_org; + int class_val; + char *found; + char *nstr; + + *ret = 0; + nstr = strdup(class_names); + if (!nstr) { + *ret = -ENOMEM; + return *ret; + } + nstr_org = nstr; + while (nstr) { + /* Extract each individual class name. Multiple + * class key,value is supplied as class=net:vdpa:foo:bar. + */ + found = strsep(&nstr, ":"); + if (!found) + continue; + /* Check if its a valid class. */ + class_val = class_name_to_value(found); + if (class_val < 0) { + *ret = -EINVAL; + goto err; + } + *ret |= class_val; + } +err: + free(nstr_org); + if (*ret < 0) + DRV_LOG(ERR, "Invalid mlx5 class options %s." + " Maybe typo in device class argument setting?", + class_names); + return *ret; +} + +static int +parse_class_options(const struct rte_devargs *devargs) +{ + const char *key = MLX5_CLASS_ARG_NAME; + struct rte_kvargs *kvlist; + int ret = 0; + + if (devargs == NULL) + return 0; + kvlist = rte_kvargs_parse(devargs->args, NULL); + if (kvlist == NULL) + return 0; + if (rte_kvargs_count(kvlist, key)) + rte_kvargs_process(kvlist, key, bus_cmdline_options_handler, + &ret); + rte_kvargs_free(kvlist); + return ret; +} + +static bool +mlx5_bus_match(const struct mlx5_pci_driver *drv, + const struct rte_pci_device *pci_dev) +{ + const struct rte_pci_id *id_table; + + for (id_table = drv->pci_driver.id_table; id_table->vendor_id != 0; + id_table++) { + /* Check if device's ids match the class driver's ids. */ + if (id_table->vendor_id != pci_dev->id.vendor_id && + id_table->vendor_id != PCI_ANY_ID) + continue; + if (id_table->device_id != pci_dev->id.device_id && + id_table->device_id != PCI_ANY_ID) + continue; + if (id_table->subsystem_vendor_id != + pci_dev->id.subsystem_vendor_id && + id_table->subsystem_vendor_id != PCI_ANY_ID) + continue; + if (id_table->subsystem_device_id != + pci_dev->id.subsystem_device_id && + id_table->subsystem_device_id != PCI_ANY_ID) + continue; + if (id_table->class_id != pci_dev->id.class_id && + id_table->class_id != RTE_CLASS_ANY_ID) + continue; + return true; + } + return false; +} + +static int +is_valid_class_combination(uint32_t user_classes) +{ + unsigned int i; + + /* Verify if user specified valid supported combination. */ + for (i = 0; i < RTE_DIM(mlx5_class_combinations); i++) { + if (mlx5_class_combinations[i] == user_classes) + return 0; + } + /* Not found any valid class combination. */ + return -EINVAL; +} + +static struct mlx5_pci_device * +pci_to_mlx5_device(const struct rte_pci_device *pci_dev) +{ + struct mlx5_pci_device *dev; + + TAILQ_FOREACH(dev, &devices_list, next) { + if (dev->pci_dev == pci_dev) + return dev; + } + return NULL; +} + +static bool +device_class_enabled(const struct mlx5_pci_device *device, uint32_t class) +{ + return (device->classes_loaded & class) ? true : false; +} + +static void +dev_release(struct mlx5_pci_device *dev) +{ + TAILQ_REMOVE(&devices_list, dev, next); + rte_free(dev); +} + +static int +drivers_remove(struct mlx5_pci_device *dev, uint32_t enabled_classes) +{ + struct mlx5_pci_driver *driver; + int local_ret = -ENODEV; + unsigned int i = 0; + int ret = 0; + + enabled_classes &= dev->classes_loaded; + while (enabled_classes) { + driver = driver_get(RTE_BIT64(i)); + if (driver) { + local_ret = driver->pci_driver.remove(dev->pci_dev); + if (!local_ret) + dev->classes_loaded &= ~RTE_BIT64(i); + else if (ret == 0) + ret = local_ret; + } + enabled_classes &= ~RTE_BIT64(i); + i++; + } + if (local_ret) + ret = local_ret; + return ret; +} + +static int +drivers_probe(struct mlx5_pci_device *dev, struct rte_pci_driver *pci_drv, + struct rte_pci_device *pci_dev, uint32_t user_classes) +{ + struct mlx5_pci_driver *driver; + uint32_t enabled_classes = 0; + bool already_loaded; + int ret; + + TAILQ_FOREACH(driver, &drv_list, next) { + if ((driver->driver_class & user_classes) == 0) + continue; + if (!mlx5_bus_match(driver, pci_dev)) + continue; + already_loaded = dev->classes_loaded & driver->driver_class; + if (already_loaded && + !(driver->pci_driver.drv_flags & RTE_PCI_DRV_PROBE_AGAIN)) { + DRV_LOG(ERR, "Device %s is already probed\n", + pci_dev->device.name); + ret = -EEXIST; + goto probe_err; + } + ret = driver->pci_driver.probe(pci_drv, pci_dev); + if (ret < 0) { + DRV_LOG(ERR, "Failed to load driver = %s.\n", + driver->pci_driver.driver.name); + goto probe_err; + } + enabled_classes |= driver->driver_class; + } + dev->classes_loaded |= enabled_classes; + return 0; +probe_err: + /* Only unload drivers which are enabled which were enabled + * in this probe instance. + */ + drivers_remove(dev, enabled_classes); + return ret; +} + +/** + * DPDK callback to register to probe multiple drivers for a PCI device. + * + * @param[in] pci_drv + * PCI driver structure. + * @param[in] dev + * PCI device information. + * + * @return + * 0 on success, a negative errno value otherwise and rte_errno is set. + */ +static int +mlx5_common_pci_probe(struct rte_pci_driver *pci_drv __rte_unused, + struct rte_pci_device *pci_dev) +{ + struct mlx5_pci_device *dev; + uint32_t user_classes = 0; + bool new_device = false; + int ret; + + ret = parse_class_options(pci_dev->device.devargs); + if (ret < 0) + return ret; + user_classes = ret; + if (user_classes) { + /* Validate combination here. */ + ret = is_valid_class_combination(user_classes); + if (ret) { + DRV_LOG(ERR, "Unsupported mlx5 classes supplied."); + return ret; + } + } else { + /* Default to net class. */ + user_classes = MLX5_CLASS_NET; + } + dev = pci_to_mlx5_device(pci_dev); + if (!dev) { + dev = rte_zmalloc("mlx5_pci_device", sizeof(*dev), 0); + if (!dev) + return -ENOMEM; + dev->pci_dev = pci_dev; + TAILQ_INSERT_HEAD(&devices_list, dev, next); + new_device = true; + } + ret = drivers_probe(dev, pci_drv, pci_dev, user_classes); + if (ret) + goto class_err; + return 0; +class_err: + if (new_device) + dev_release(dev); + return ret; +} + +/** + * DPDK callback to remove one or more drivers for a PCI device. + * + * This function removes all drivers probed for a given PCI device. + * + * @param[in] pci_dev + * Pointer to the PCI device. + * + * @return + * 0 on success, the function cannot fail. + */ +static int +mlx5_common_pci_remove(struct rte_pci_device *pci_dev) +{ + struct mlx5_pci_device *dev; + int ret; + + dev = pci_to_mlx5_device(pci_dev); + if (!dev) + return -ENODEV; + /* Matching device found, cleanup and unload drivers. */ + ret = drivers_remove(dev, dev->classes_loaded); + if (!ret) + dev_release(dev); + return ret; +} + +static int +mlx5_common_pci_dma_map(struct rte_pci_device *pci_dev, void *addr, + uint64_t iova, size_t len) +{ + struct mlx5_pci_driver *driver = NULL; + struct mlx5_pci_driver *temp; + struct mlx5_pci_device *dev; + int ret = -EINVAL; + + dev = pci_to_mlx5_device(pci_dev); + if (!dev) + return -ENODEV; + TAILQ_FOREACH(driver, &drv_list, next) { + if (device_class_enabled(dev, driver->driver_class) && + driver->pci_driver.dma_map) { + ret = driver->pci_driver.dma_map(pci_dev, addr, + iova, len); + if (ret) + goto map_err; + } + } + return ret; +map_err: + TAILQ_FOREACH(temp, &drv_list, next) { + if (temp == driver) + break; + if (device_class_enabled(dev, temp->driver_class) && + temp->pci_driver.dma_map && temp->pci_driver.dma_unmap) + temp->pci_driver.dma_unmap(pci_dev, addr, iova, len); + } + return ret; +} + +static int +mlx5_common_pci_dma_unmap(struct rte_pci_device *pci_dev, void *addr, + uint64_t iova, size_t len) +{ + struct mlx5_pci_driver *driver; + struct mlx5_pci_device *dev; + int local_ret = -EINVAL; + int ret; + + dev = pci_to_mlx5_device(pci_dev); + if (!dev) + return -ENODEV; + ret = 0; + /* There is no unmap error recovery in current implementation. */ + TAILQ_FOREACH_REVERSE(driver, &drv_list, mlx5_pci_bus_drv_head, next) { + if (device_class_enabled(dev, driver->driver_class) && + driver->pci_driver.dma_unmap) { + local_ret = driver->pci_driver.dma_unmap(pci_dev, addr, + iova, len); + if (local_ret && (ret == 0)) + ret = local_ret; + } + } + if (local_ret) + ret = local_ret; + return ret; +} + +/* PCI ID table is build dynamically based on registered mlx5 drivers. */ +static struct rte_pci_id *mlx5_pci_id_table; + +static struct rte_pci_driver mlx5_pci_driver = { + .driver = { + .name = "mlx5_pci", + }, + .probe = mlx5_common_pci_probe, + .remove = mlx5_common_pci_remove, + .dma_map = mlx5_common_pci_dma_map, + .dma_unmap = mlx5_common_pci_dma_unmap, +}; + +static int +pci_id_table_size_get(const struct rte_pci_id *id_table) +{ + int table_size = 0; + + for (; id_table->vendor_id != 0; id_table++) + table_size++; + return table_size; +} + +static bool +pci_id_exists(const struct rte_pci_id *id, const struct rte_pci_id *table, + int next_idx) +{ + int current_size = next_idx - 1; + int i; + + for (i = 0; i < current_size; i++) { + if (id->device_id == table[i].device_id && + id->vendor_id == table[i].vendor_id && + id->subsystem_vendor_id == table[i].subsystem_vendor_id && + id->subsystem_device_id == table[i].subsystem_device_id) + return true; + } + return false; +} + +static void +pci_id_insert(struct rte_pci_id *new_table, int *next_idx, + const struct rte_pci_id *id_table) +{ + /* Traverse the id_table, check if entry exists in new_table; + * Add non duplicate entries to new table. + */ + for (; id_table->vendor_id != 0; id_table++) { + if (!pci_id_exists(id_table, new_table, *next_idx)) { + /* New entry; add to the table. */ + new_table[*next_idx] = *id_table; + (*next_idx)++; + } + } +} + +static int +pci_ids_table_update(const struct rte_pci_id *driver_id_table) +{ + const struct rte_pci_id *id_iter; + struct rte_pci_id *updated_table; + struct rte_pci_id *old_table; + int num_ids = 0; + int i = 0; + + old_table = mlx5_pci_id_table; + if (old_table) + num_ids = pci_id_table_size_get(old_table); + num_ids += pci_id_table_size_get(driver_id_table); + /* Increase size by one for the termination entry of vendor_id = 0. */ + num_ids += 1; + updated_table = calloc(num_ids, sizeof(*updated_table)); + if (!updated_table) + return -ENOMEM; + if (TAILQ_EMPTY(&drv_list)) { + /* Copy the first driver's ID table. */ + for (id_iter = driver_id_table; id_iter->vendor_id != 0; + id_iter++, i++) + updated_table[i] = *id_iter; + } else { + /* First copy existing table entries. */ + for (id_iter = old_table; id_iter->vendor_id != 0; + id_iter++, i++) + updated_table[i] = *id_iter; + /* New id to be added at the end of current ID table. */ + pci_id_insert(updated_table, &i, driver_id_table); + } + /* Terminate table with empty entry. */ + updated_table[i].vendor_id = 0; + mlx5_pci_driver.id_table = updated_table; + mlx5_pci_id_table = updated_table; + if (old_table) + free(old_table); + return 0; +} + +void +mlx5_pci_driver_register(struct mlx5_pci_driver *driver) +{ + int ret; + + ret = pci_ids_table_update(driver->pci_driver.id_table); + if (ret) + return; + mlx5_pci_driver.drv_flags |= driver->pci_driver.drv_flags; + TAILQ_INSERT_TAIL(&drv_list, driver, next); +} + +void mlx5_common_pci_init(void) +{ + const struct rte_pci_id empty_table[] = { + { + .vendor_id = 0 + }, + }; + + /* All mlx5 PMDs constructor runs at same priority. So any of the PMD + * including this one can register the PCI table first. If any other + * PMD(s) have registered the PCI ID table, No need to register an empty + * default one. + */ + if (mlx5_pci_id_table == NULL && pci_ids_table_update(empty_table)) + return; + rte_pci_register(&mlx5_pci_driver); +} + +RTE_FINI(mlx5_common_pci_finish) +{ + if (mlx5_pci_id_table != NULL) { + /* Constructor doesn't register with PCI bus if it failed + * to build the table. + */ + rte_pci_unregister(&mlx5_pci_driver); + free(mlx5_pci_id_table); + } +} +RTE_PMD_EXPORT_NAME(mlx5_common_pci, __COUNTER__); diff --git a/drivers/common/mlx5/mlx5_common_pci.h b/drivers/common/mlx5/mlx5_common_pci.h new file mode 100644 index 0000000000..41b73e17a7 --- /dev/null +++ b/drivers/common/mlx5/mlx5_common_pci.h @@ -0,0 +1,77 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2020 Mellanox Technologies, Ltd + */ + +#ifndef _MLX5_COMMON_PCI_H_ +#define _MLX5_COMMON_PCI_H_ + +/** + * @file + * + * RTE Mellanox PCI Driver Interface + * Mellanox ConnectX PCI device supports multiple class (net/vdpa/regex) + * devices. This layer enables creating such multiple class of devices on a + * single PCI device by allowing to bind multiple class specific device + * driver to attach to mlx5_pci driver. + * + * ----------- ------------ ------------- + * | mlx5 | | mlx5 | | mlx5 | + * | net pmd | | vdpa pmd | | regex pmd | + * ----------- ------------ ------------- + * \ | / + * \ | / + * \ -------------- / + * \______| mlx5 |_____ / + * | pci common | + * -------------- + * | + * ----------- + * | mlx5 | + * | pci dev | + * ----------- + * + * - mlx5 pci driver binds to mlx5 PCI devices defined by PCI + * ID table of all related mlx5 PCI devices. + * - mlx5 class driver such as net, vdpa, regex PMD defines its + * specific PCI ID table and mlx5 bus driver probes matching + * class drivers. + * - mlx5 pci bus driver is cental place that validates supported + * class combinations. + */ + +#ifdef __cplusplus +extern "C" { +#endif /* __cplusplus */ + +#include +#include + +#include + +void mlx5_common_pci_init(void); + +/** + * A structure describing a mlx5 pci driver. + */ +struct mlx5_pci_driver { + struct rte_pci_driver pci_driver; /**< Inherit core pci driver. */ + uint32_t driver_class; /**< Class of this driver, enum mlx5_class */ + TAILQ_ENTRY(mlx5_pci_driver) next; +}; + +/** + * Register a mlx5_pci device driver. + * + * @param driver + * A pointer to a mlx5_pci_driver structure describing the driver + * to be registered. + */ +__rte_internal +void +mlx5_pci_driver_register(struct mlx5_pci_driver *driver); + +#ifdef __cplusplus +} +#endif /* __cplusplus */ + +#endif /* _MLX5_COMMON_PCI_H_ */ diff --git a/drivers/common/mlx5/rte_common_mlx5_version.map b/drivers/common/mlx5/rte_common_mlx5_version.map index 65f25252ad..73cf72548a 100644 --- a/drivers/common/mlx5/rte_common_mlx5_version.map +++ b/drivers/common/mlx5/rte_common_mlx5_version.map @@ -91,5 +91,7 @@ INTERNAL { mlx5_malloc; mlx5_realloc; mlx5_free; + + mlx5_pci_driver_register; }; diff --git a/drivers/meson.build b/drivers/meson.build index 0389574603..5f95265573 100644 --- a/drivers/meson.build +++ b/drivers/meson.build @@ -5,6 +5,7 @@ subdirs = [ 'common', 'bus', + 'common/mlx5', # depends on bus. 'mempool', # depends on common and bus. 'net', # depends on common, bus, mempool 'raw', # depends on common, bus and net.