From: Moti Haimovsky Date: Wed, 31 Jan 2018 17:32:03 +0000 (+0200) Subject: app/testpmd: disable Rx VLAN offloads by default X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=8b9bd0efe0b6920a08e28eebacf2bb916bdf5653;p=dpdk.git app/testpmd: disable Rx VLAN offloads by default Removed the hardcoded preconfigured Rx VLAN offload configuration from testpmd and changed the Rx offload command line parameters from disable to enable. It has been decided by the Technical Board that testers who wish to use these offloads will now have to explicitly write them in the command-line when running testpmd. The agreement is to keep two exceptions enabled by default in 18.02: Rx CRC strip and Tx fast free. Motivation: Some PMDs such at the mlx4 may not implement all the offloads. After the offload API rework assuming no offload is enabled by default, commit ce17eddefc20 ("ethdev: introduce Rx queue offloads API") commit cba7f53b717d ("ethdev: introduce Tx queue offloads API") trying to enable a not supported offload is clearly an error which will cause configuration failing. Considering that testpmd is an application to test the PMD, it should not fail on a configuration which was not explicitly requested. The behavior of this test application is then turned to an opt-in model. Signed-off-by: Moti Haimovsky Acked-by: Thomas Monjalon --- diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index fd5907177d..97d22b8601 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -133,10 +133,10 @@ usage(char* progname) printf(" --enable-lro: enable large receive offload.\n"); printf(" --enable-rx-cksum: enable rx hardware checksum offload.\n"); printf(" --enable-rx-timestamp: enable rx hardware timestamp offload.\n"); - printf(" --disable-hw-vlan: disable hardware vlan.\n"); - printf(" --disable-hw-vlan-filter: disable hardware vlan filter.\n"); - printf(" --disable-hw-vlan-strip: disable hardware vlan strip.\n"); - printf(" --disable-hw-vlan-extend: disable hardware vlan extend.\n"); + printf(" --enable-hw-vlan: enable hardware vlan.\n"); + printf(" --enable-hw-vlan-filter: enable hardware vlan filter.\n"); + printf(" --enable-hw-vlan-strip: enable hardware vlan strip.\n"); + printf(" --enable-hw-vlan-extend: enable hardware vlan extend.\n"); printf(" --enable-drop-en: enable per queue packet drop.\n"); printf(" --disable-rss: disable rss.\n"); printf(" --port-topology=N: set port topology (N: paired (default) or " @@ -585,10 +585,10 @@ launch_args_parse(int argc, char** argv) { "enable-rx-cksum", 0, 0, 0 }, { "enable-rx-timestamp", 0, 0, 0 }, { "enable-scatter", 0, 0, 0 }, - { "disable-hw-vlan", 0, 0, 0 }, - { "disable-hw-vlan-filter", 0, 0, 0 }, - { "disable-hw-vlan-strip", 0, 0, 0 }, - { "disable-hw-vlan-extend", 0, 0, 0 }, + { "enable-hw-vlan", 0, 0, 0 }, + { "enable-hw-vlan-filter", 0, 0, 0 }, + { "enable-hw-vlan-strip", 0, 0, 0 }, + { "enable-hw-vlan-extend", 0, 0, 0 }, { "enable-drop-en", 0, 0, 0 }, { "disable-rss", 0, 0, 0 }, { "port-topology", 1, 0, 0 }, @@ -886,20 +886,20 @@ launch_args_parse(int argc, char** argv) if (!strcmp(lgopts[opt_idx].name, "enable-rx-timestamp")) rx_offloads |= DEV_RX_OFFLOAD_TIMESTAMP; - if (!strcmp(lgopts[opt_idx].name, "disable-hw-vlan")) - rx_offloads &= ~DEV_RX_OFFLOAD_VLAN; + if (!strcmp(lgopts[opt_idx].name, "enable-hw-vlan")) + rx_offloads |= DEV_RX_OFFLOAD_VLAN; if (!strcmp(lgopts[opt_idx].name, - "disable-hw-vlan-filter")) - rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_FILTER; + "enable-hw-vlan-filter")) + rx_offloads |= DEV_RX_OFFLOAD_VLAN_FILTER; if (!strcmp(lgopts[opt_idx].name, - "disable-hw-vlan-strip")) - rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_STRIP; + "enable-hw-vlan-strip")) + rx_offloads |= DEV_RX_OFFLOAD_VLAN_STRIP; if (!strcmp(lgopts[opt_idx].name, - "disable-hw-vlan-extend")) - rx_offloads &= ~DEV_RX_OFFLOAD_VLAN_EXTEND; + "enable-hw-vlan-extend")) + rx_offloads |= DEV_RX_OFFLOAD_VLAN_EXTEND; if (!strcmp(lgopts[opt_idx].name, "enable-drop-en")) rx_drop_en = 1; diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c index f64dd73340..fc8effad9a 100644 --- a/app/test-pmd/testpmd.c +++ b/app/test-pmd/testpmd.c @@ -306,9 +306,7 @@ lcoreid_t latencystats_lcore_id = -1; */ struct rte_eth_rxmode rx_mode = { .max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */ - .offloads = (DEV_RX_OFFLOAD_VLAN_FILTER | - DEV_RX_OFFLOAD_VLAN_STRIP | - DEV_RX_OFFLOAD_CRC_STRIP), + .offloads = DEV_RX_OFFLOAD_CRC_STRIP, .ignore_offload_bitfield = 1, }; @@ -670,7 +668,7 @@ init_config(void) RTE_ETH_FOREACH_DEV(pid) { port = &ports[pid]; - /* Apply default Tx configuration for all ports */ + /* Apply default TxRx configuration for all ports */ port->dev_conf.txmode = tx_mode; port->dev_conf.rxmode = rx_mode; rte_eth_dev_info_get(pid, &port->dev_info); @@ -678,7 +676,10 @@ init_config(void) DEV_TX_OFFLOAD_MBUF_FAST_FREE)) port->dev_conf.txmode.offloads &= ~DEV_TX_OFFLOAD_MBUF_FAST_FREE; - + if (!(port->dev_info.rx_offload_capa & + DEV_RX_OFFLOAD_CRC_STRIP)) + port->dev_conf.rxmode.offloads &= + ~DEV_RX_OFFLOAD_CRC_STRIP; if (numa_support) { if (port_numa[pid] != NUMA_NO_CONFIG) port_per_socket[port_numa[pid]]++; diff --git a/doc/guides/contributing/documentation.rst b/doc/guides/contributing/documentation.rst index 170dacdb77..82f2e1bb35 100644 --- a/doc/guides/contributing/documentation.rst +++ b/doc/guides/contributing/documentation.rst @@ -294,7 +294,7 @@ Line Length testpmd -l 2-3 -n 4 \ --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \ - -- -i --txqflags=0x0 --disable-hw-vlan --enable-lro \ + -- -i --txqflags=0x0 --enable-hw-vlan --enable-lro \ --enable-rx-cksum --txq=2 --rxq=2 --rxd=1024 --txd=1024 diff --git a/doc/guides/howto/lm_virtio_vhost_user.rst b/doc/guides/howto/lm_virtio_vhost_user.rst index 9402ed8d28..0661e8807b 100644 --- a/doc/guides/howto/lm_virtio_vhost_user.rst +++ b/doc/guides/howto/lm_virtio_vhost_user.rst @@ -466,4 +466,4 @@ run_testpmd_in_vm.sh # test system has 8 cpus (0-7), use cpus 2-7 for VM /root/dpdk/x86_64-default-linuxapp-gcc/app/testpmd \ - -l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i --disable-hw-vlan-filter + -l 0-5 -n 4 --socket-mem 350 -- --burst=64 --i diff --git a/doc/guides/howto/pvp_reference_benchmark.rst b/doc/guides/howto/pvp_reference_benchmark.rst index 228b4a2575..67fa232ec4 100644 --- a/doc/guides/howto/pvp_reference_benchmark.rst +++ b/doc/guides/howto/pvp_reference_benchmark.rst @@ -158,7 +158,7 @@ Testpmd launch $RTE_SDK/install/bin/testpmd -l 0,2,3,4,5 --socket-mem=1024 -n 4 \ --vdev 'net_vhost0,iface=/tmp/vhost-user1' \ --vdev 'net_vhost1,iface=/tmp/vhost-user2' -- \ - --portmask=f --disable-hw-vlan -i --rxq=1 --txq=1 \ + --portmask=f -i --rxq=1 --txq=1 \ --nb-cores=4 --forward-mode=io With this command, isolated CPUs 2 to 5 will be used as lcores for PMD threads. @@ -375,7 +375,7 @@ Start testpmd: $RTE_SDK/install/bin/testpmd -l 0,1,2 --socket-mem 1024 -n 4 \ --proc-type auto --file-prefix pg -- \ --portmask=3 --forward-mode=macswap --port-topology=chained \ - --disable-hw-vlan --disable-rss -i --rxq=1 --txq=1 \ + --disable-rss -i --rxq=1 --txq=1 \ --rxd=256 --txd=256 --nb-cores=2 --auto-start Results template diff --git a/doc/guides/howto/virtio_user_as_exceptional_path.rst b/doc/guides/howto/virtio_user_as_exceptional_path.rst index 3f99fe8231..393f002430 100644 --- a/doc/guides/howto/virtio_user_as_exceptional_path.rst +++ b/doc/guides/howto/virtio_user_as_exceptional_path.rst @@ -84,7 +84,7 @@ compiling the kernel and those kernel modules should be inserted. $(testpmd) -l 2-3 -n 4 \ --vdev=virtio_user0,path=/dev/vhost-net,queue_size=1024 \ - -- -i --txqflags=0x0 --disable-hw-vlan --enable-lro \ + -- -i --txqflags=0x0 --enable-lro \ --enable-rx-cksum --rxd=1024 --txd=1024 This command runs testpmd with two ports, one physical NIC to communicate @@ -113,7 +113,7 @@ compiling the kernel and those kernel modules should be inserted. $(testpmd) -l 2-3 -n 4 \ --vdev=virtio_user0,path=/dev/vhost-net,queues=2,queue_size=1024 \ - -- -i --txqflags=0x0 --disable-hw-vlan --enable-lro \ + -- -i --txqflags=0x0 --enable-lro \ --enable-rx-cksum --txq=2 --rxq=2 --rxd=1024 \ --txd=1024 diff --git a/doc/guides/nics/mrvl.rst b/doc/guides/nics/mrvl.rst index 77b2d6649f..b7f32921ad 100644 --- a/doc/guides/nics/mrvl.rst +++ b/doc/guides/nics/mrvl.rst @@ -215,7 +215,7 @@ Usage example .. code-block:: console ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2,cfg=/home/user/mrvl.conf \ - -c 7 -- -i -a --disable-hw-vlan-strip --rxq=2 + -c 7 -- -i -a --rxq=2 Building DPDK @@ -272,4 +272,4 @@ In order to run testpmd example application following command can be used: ./testpmd --vdev=eth_mrvl,iface=eth0,iface=eth2 -c 7 -- \ --burst=128 --txd=2048 --rxd=1024 --rxq=2 --txq=2 --nb-cores=2 \ - -i -a --disable-hw-vlan-strip --rss-udp + -i -a --rss-udp diff --git a/doc/guides/nics/octeontx.rst b/doc/guides/nics/octeontx.rst index 212fe3465b..8e2a2b75b0 100644 --- a/doc/guides/nics/octeontx.rst +++ b/doc/guides/nics/octeontx.rst @@ -88,8 +88,8 @@ following ``make`` command: --mbuf-pool-ops-name="octeontx_fpavf" \ --vdev='event_octeontx' \ --vdev='eth_octeontx,nr_port=2' \ - -- --rxq=1 --txq=1 --nb-core=2 --total-num-mbufs=16384 \ - --disable-hw-vlan-filter -i + -- --rxq=1 --txq=1 --nb-core=2 \ + --total-num-mbufs=16384 -i ..... EAL: Detected 24 lcore(s) EAL: Probing VFIO support... diff --git a/doc/guides/nics/thunderx.rst b/doc/guides/nics/thunderx.rst index 1c800e73ec..5270ef23ec 100644 --- a/doc/guides/nics/thunderx.rst +++ b/doc/guides/nics/thunderx.rst @@ -177,7 +177,7 @@ This section provides instructions to configure SR-IOV with Linux OS. .. code-block:: console ./arm64-thunderx-linuxapp-gcc/app/testpmd -l 0-3 -n 4 -w 0002:01:00.2 \ - -- -i --disable-hw-vlan-filter --disable-crc-strip --no-flush-rx \ + -- -i --no-flush-rx \ --port-topology=loop ... diff --git a/doc/guides/nics/virtio.rst b/doc/guides/nics/virtio.rst index af82f86e4a..90751e934a 100644 --- a/doc/guides/nics/virtio.rst +++ b/doc/guides/nics/virtio.rst @@ -78,8 +78,9 @@ In this release, the virtio PMD driver provides the basic functionality of packe by default. Tx queue size is still hard-coded to be 256. * Features of mac/vlan filter are supported, negotiation with vhost/backend are needed to support them. - When backend can't support vlan filter, virtio app on guest should disable vlan filter to make sure - the virtio port is configured correctly. E.g. specify '--disable-hw-vlan' in testpmd command line. + When backend can't support vlan filter, virtio app on guest should not enable vlan filter in order + to make sure the virtio port is configured correctly. E.g. do not specify '--enable-hw-vlan' in testpmd + command line. * "RTE_PKTMBUF_HEADROOM" should be defined no less than "sizeof(struct virtio_net_hdr_mrg_rxbuf)", which is 12 bytes when mergeable or diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst index 46da1dfd71..782be3e356 100644 --- a/doc/guides/testpmd_app_ug/run_app.rst +++ b/doc/guides/testpmd_app_ug/run_app.rst @@ -315,21 +315,21 @@ The commandline options are: Enable scatter (multi-segment) RX. -* ``--disable-hw-vlan`` +* ``--enable-hw-vlan`` - Disable hardware VLAN. + Enable hardware VLAN. -* ``--disable-hw-vlan-filter`` +* ``--enable-hw-vlan-filter`` - Disable hardware VLAN filter. + Enable hardware VLAN filter. -* ``--disable-hw-vlan-strip`` +* ``--enable-hw-vlan-strip`` - Disable hardware VLAN strip. + Enable hardware VLAN strip. -* ``--disable-hw-vlan-extend`` +* ``--enable-hw-vlan-extend`` - Disable hardware VLAN extend. + Enable hardware VLAN extend. * ``--enable-drop-en`` diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst index d8c9ef0e6f..a63b236792 100644 --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst @@ -1706,9 +1706,9 @@ Set hardware VLAN on or off for all ports:: testpmd> port config all hw-vlan (on|off) -Hardware VLAN is on by default. +Hardware VLAN is off by default. -The ``off`` option is equivalent to the ``--disable-hw-vlan`` command-line option. +The ``on`` option is equivalent to the ``--enable-hw-vlan`` command-line option. port config - VLAN filter ~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1717,9 +1717,9 @@ Set hardware VLAN filter on or off for all ports:: testpmd> port config all hw-vlan-filter (on|off) -Hardware VLAN filter is on by default. +Hardware VLAN filter is off by default. -The ``off`` option is equivalent to the ``--disable-hw-vlan-filter`` command-line option. +The ``on`` option is equivalent to the ``--enable-hw-vlan-filter`` command-line option. port config - VLAN strip ~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1728,9 +1728,9 @@ Set hardware VLAN strip on or off for all ports:: testpmd> port config all hw-vlan-strip (on|off) -Hardware VLAN strip is on by default. +Hardware VLAN strip is off by default. -The ``off`` option is equivalent to the ``--disable-hw-vlan-strip`` command-line option. +The ``on`` option is equivalent to the ``--enable-hw-vlan-strip`` command-line option. port config - VLAN extend ~~~~~~~~~~~~~~~~~~~~~~~~~ @@ -1741,7 +1741,7 @@ Set hardware VLAN extend on or off for all ports:: Hardware VLAN extend is off by default. -The ``off`` option is equivalent to the ``--disable-hw-vlan-extend`` command-line option. +The ``on`` option is equivalent to the ``--enable-hw-vlan-extend`` command-line option. port config - Drop Packets ~~~~~~~~~~~~~~~~~~~~~~~~~~