From: Stephen Hemminger Date: Mon, 9 Feb 2015 01:13:53 +0000 (+0800) Subject: virtio: support link state interrupt X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=8d6d7e5cb3b1e7441aaff46dc8f04aa0ac945d98;p=dpdk.git virtio: support link state interrupt Virtio has link state interrupt which can be used. Signed-off-by: Stephen Hemminger Signed-off-by: Changchun Ouyang Acked-by: Huawei Xie --- diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c b/lib/librte_pmd_virtio/virtio_ethdev.c index 879f1c8d0e..b887e5416f 100644 --- a/lib/librte_pmd_virtio/virtio_ethdev.c +++ b/lib/librte_pmd_virtio/virtio_ethdev.c @@ -844,6 +844,34 @@ static int virtio_resource_init(struct rte_pci_device *pci_dev __rte_unused) } #endif +/* + * Process Virtio Config changed interrupt and call the callback + * if link state changed. + */ +static void +virtio_interrupt_handler(__rte_unused struct rte_intr_handle *handle, + void *param) +{ + struct rte_eth_dev *dev = param; + struct virtio_hw *hw = + VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private); + uint8_t isr; + + /* Read interrupt status which clears interrupt */ + isr = vtpci_isr(hw); + PMD_DRV_LOG(INFO, "interrupt status = %#x", isr); + + if (rte_intr_enable(&dev->pci_dev->intr_handle) < 0) + PMD_DRV_LOG(ERR, "interrupt enable failed"); + + if (isr & VIRTIO_PCI_ISR_CONFIG) { + if (virtio_dev_link_update(dev, 0) == 0) + _rte_eth_dev_callback_process(dev, + RTE_ETH_EVENT_INTR_LSC); + } + +} + /* * This function is based on probe() function in virtio_pci.c * It returns 0 on success. @@ -964,6 +992,10 @@ eth_virtio_dev_init(__rte_unused struct eth_driver *eth_drv, PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x", eth_dev->data->port_id, pci_dev->id.vendor_id, pci_dev->id.device_id); + + /* Setup interrupt callback */ + rte_intr_callback_register(&pci_dev->intr_handle, + virtio_interrupt_handler, eth_dev); return 0; } @@ -971,7 +1003,7 @@ static struct eth_driver rte_virtio_pmd = { { .name = "rte_virtio_pmd", .id_table = pci_id_virtio_map, - .drv_flags = RTE_PCI_DRV_NEED_MAPPING, + .drv_flags = RTE_PCI_DRV_NEED_MAPPING | RTE_PCI_DRV_INTR_LSC, }, .eth_dev_init = eth_virtio_dev_init, .dev_private_size = sizeof(struct virtio_adapter), @@ -1017,6 +1049,9 @@ static int virtio_dev_configure(struct rte_eth_dev *dev) { const struct rte_eth_rxmode *rxmode = &dev->data->dev_conf.rxmode; + struct virtio_hw *hw = + VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private); + int ret; PMD_INIT_LOG(DEBUG, "configure"); @@ -1025,7 +1060,11 @@ virtio_dev_configure(struct rte_eth_dev *dev) return (-EINVAL); } - return 0; + ret = vtpci_irq_config(hw, 0); + if (ret != 0) + PMD_DRV_LOG(ERR, "failed to set config vector"); + + return ret; } @@ -1033,7 +1072,6 @@ static int virtio_dev_start(struct rte_eth_dev *dev) { uint16_t nb_queues, i; - uint16_t status; struct virtio_hw *hw = VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private); @@ -1048,18 +1086,22 @@ virtio_dev_start(struct rte_eth_dev *dev) /* Do final configuration before rx/tx engine starts */ virtio_dev_rxtx_start(dev); - /* Check VIRTIO_NET_F_STATUS for link status*/ - if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) { - vtpci_read_dev_config(hw, - offsetof(struct virtio_net_config, status), - &status, sizeof(status)); - if ((status & VIRTIO_NET_S_LINK_UP) == 0) - PMD_INIT_LOG(ERR, "Port: %d Link is DOWN", - dev->data->port_id); - else - PMD_INIT_LOG(DEBUG, "Port: %d Link is UP", - dev->data->port_id); + /* check if lsc interrupt feature is enabled */ + if (dev->data->dev_conf.intr_conf.lsc) { + if (!vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) { + PMD_DRV_LOG(ERR, "link status not supported by host"); + return -ENOTSUP; + } + + if (rte_intr_enable(&dev->pci_dev->intr_handle) < 0) { + PMD_DRV_LOG(ERR, "interrupt enable failed"); + return -EIO; + } } + + /* Initialize Link state */ + virtio_dev_link_update(dev, 0); + vtpci_reinit_complete(hw); /*Notify the backend @@ -1141,6 +1183,7 @@ virtio_dev_stop(struct rte_eth_dev *dev) VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private); /* reset the NIC */ + vtpci_irq_config(hw, 0); vtpci_reset(hw); virtio_dev_free_mbufs(dev); } @@ -1157,6 +1200,7 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet old = link; link.link_duplex = FULL_DUPLEX; link.link_speed = SPEED_10G; + if (vtpci_with_feature(hw, VIRTIO_NET_F_STATUS)) { PMD_INIT_LOG(DEBUG, "Get link status from hw"); vtpci_read_dev_config(hw, @@ -1175,10 +1219,8 @@ virtio_dev_link_update(struct rte_eth_dev *dev, __rte_unused int wait_to_complet link.link_status = 1; /* Link up */ } virtio_dev_atomic_write_link_status(dev, &link); - if (old.link_status == link.link_status) - return -1; - /*changed*/ - return 0; + + return (old.link_status == link.link_status) ? -1 : 0; } static void diff --git a/lib/librte_pmd_virtio/virtio_pci.c b/lib/librte_pmd_virtio/virtio_pci.c index 206c65bda5..fac87a767e 100644 --- a/lib/librte_pmd_virtio/virtio_pci.c +++ b/lib/librte_pmd_virtio/virtio_pci.c @@ -129,3 +129,25 @@ vtpci_set_status(struct virtio_hw *hw, uint8_t status) VIRTIO_WRITE_REG_1(hw, VIRTIO_PCI_STATUS, status); } + +uint8_t +vtpci_isr(struct virtio_hw *hw) +{ + + return VIRTIO_READ_REG_1(hw, VIRTIO_PCI_ISR); +} + + +/* Enable one vector (0) for Link State Intrerrupt */ +int +vtpci_irq_config(struct virtio_hw *hw, uint16_t vec) +{ + VIRTIO_WRITE_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR, vec); + vec = VIRTIO_READ_REG_2(hw, VIRTIO_MSI_CONFIG_VECTOR); + if (vec == VIRTIO_MSI_NO_VECTOR) { + PMD_DRV_LOG(ERR, "failed to set config vector"); + return -EBUSY; + } + + return 0; +} diff --git a/lib/librte_pmd_virtio/virtio_pci.h b/lib/librte_pmd_virtio/virtio_pci.h index 8cc46368f0..fd9d726e5d 100644 --- a/lib/librte_pmd_virtio/virtio_pci.h +++ b/lib/librte_pmd_virtio/virtio_pci.h @@ -261,4 +261,8 @@ void vtpci_write_dev_config(struct virtio_hw *, uint64_t, void *, int); void vtpci_read_dev_config(struct virtio_hw *, uint64_t, void *, int); +uint8_t vtpci_isr(struct virtio_hw *); + +int vtpci_irq_config(struct virtio_hw *, uint16_t); + #endif /* _VIRTIO_PCI_H_ */