From: Andrew Rybchenko Date: Tue, 29 Nov 2016 16:19:07 +0000 (+0000) Subject: net/sfc: estimate available resources X-Git-Tag: spdx-start~5064 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=91831d4068c8;p=dpdk.git net/sfc: estimate available resources Resources required in accordance with configuration are allocated only. Signed-off-by: Andrew Rybchenko Reviewed-by: Andy Moreton Reviewed-by: Ferruh Yigit --- diff --git a/doc/guides/nics/sfc_efx.rst b/doc/guides/nics/sfc_efx.rst index 31e86a7a5f..271c8c6912 100644 --- a/doc/guides/nics/sfc_efx.rst +++ b/doc/guides/nics/sfc_efx.rst @@ -37,6 +37,14 @@ More information can be found at `Solarflare Communications website `_. +Features +-------- + +SFC EFX PMD has support for: + +- Multiple transmit and receive queues + + Non-supported Features ---------------------- diff --git a/drivers/net/sfc/sfc.c b/drivers/net/sfc/sfc.c index 736900aeb5..b676524343 100644 --- a/drivers/net/sfc/sfc.c +++ b/drivers/net/sfc/sfc.c @@ -126,6 +126,105 @@ sfc_check_conf(struct sfc_adapter *sa) return rc; } +/* + * Find out maximum number of receive and transmit queues which could be + * advertised. + * + * NIC is kept initialized on success to allow other modules acquire + * defaults and capabilities. + */ +static int +sfc_estimate_resource_limits(struct sfc_adapter *sa) +{ + const efx_nic_cfg_t *encp = efx_nic_cfg_get(sa->nic); + efx_drv_limits_t limits; + int rc; + uint32_t evq_allocated; + uint32_t rxq_allocated; + uint32_t txq_allocated; + + memset(&limits, 0, sizeof(limits)); + + /* Request at least one Rx and Tx queue */ + limits.edl_min_rxq_count = 1; + limits.edl_min_txq_count = 1; + /* Management event queue plus event queue for each Tx and Rx queue */ + limits.edl_min_evq_count = + 1 + limits.edl_min_rxq_count + limits.edl_min_txq_count; + + /* Divide by number of functions to guarantee that all functions + * will get promised resources + */ + /* FIXME Divide by number of functions (not 2) below */ + limits.edl_max_evq_count = encp->enc_evq_limit / 2; + SFC_ASSERT(limits.edl_max_evq_count >= limits.edl_min_rxq_count); + + /* Split equally between receive and transmit */ + limits.edl_max_rxq_count = + MIN(encp->enc_rxq_limit, (limits.edl_max_evq_count - 1) / 2); + SFC_ASSERT(limits.edl_max_rxq_count >= limits.edl_min_rxq_count); + + limits.edl_max_txq_count = + MIN(encp->enc_txq_limit, + limits.edl_max_evq_count - 1 - limits.edl_max_rxq_count); + SFC_ASSERT(limits.edl_max_txq_count >= limits.edl_min_rxq_count); + + /* Configure the minimum required resources needed for the + * driver to operate, and the maximum desired resources that the + * driver is capable of using. + */ + efx_nic_set_drv_limits(sa->nic, &limits); + + sfc_log_init(sa, "init nic"); + rc = efx_nic_init(sa->nic); + if (rc != 0) + goto fail_nic_init; + + /* Find resource dimensions assigned by firmware to this function */ + rc = efx_nic_get_vi_pool(sa->nic, &evq_allocated, &rxq_allocated, + &txq_allocated); + if (rc != 0) + goto fail_get_vi_pool; + + /* It still may allocate more than maximum, ensure limit */ + evq_allocated = MIN(evq_allocated, limits.edl_max_evq_count); + rxq_allocated = MIN(rxq_allocated, limits.edl_max_rxq_count); + txq_allocated = MIN(txq_allocated, limits.edl_max_txq_count); + + /* Subtract management EVQ not used for traffic */ + SFC_ASSERT(evq_allocated > 0); + evq_allocated--; + + /* Right now we use separate EVQ for Rx and Tx */ + sa->rxq_max = MIN(rxq_allocated, evq_allocated / 2); + sa->txq_max = MIN(txq_allocated, evq_allocated - sa->rxq_max); + + /* Keep NIC initialized */ + return 0; + +fail_get_vi_pool: +fail_nic_init: + efx_nic_fini(sa->nic); + return rc; +} + +static int +sfc_set_drv_limits(struct sfc_adapter *sa) +{ + const struct rte_eth_dev_data *data = sa->eth_dev->data; + efx_drv_limits_t lim; + + memset(&lim, 0, sizeof(lim)); + + /* Limits are strict since take into account initial estimation */ + lim.edl_min_evq_count = lim.edl_max_evq_count = + 1 + data->nb_rx_queues + data->nb_tx_queues; + lim.edl_min_rxq_count = lim.edl_max_rxq_count = data->nb_rx_queues; + lim.edl_min_txq_count = lim.edl_max_txq_count = data->nb_tx_queues; + + return efx_nic_set_drv_limits(sa->nic, &lim); +} + int sfc_start(struct sfc_adapter *sa) { @@ -148,6 +247,11 @@ sfc_start(struct sfc_adapter *sa) sa->state = SFC_ADAPTER_STARTING; + sfc_log_init(sa, "set resource limits"); + rc = sfc_set_drv_limits(sa); + if (rc != 0) + goto fail_set_drv_limits; + sfc_log_init(sa, "init nic"); rc = efx_nic_init(sa->nic); if (rc != 0) @@ -158,6 +262,7 @@ sfc_start(struct sfc_adapter *sa) return 0; fail_nic_init: +fail_set_drv_limits: sa->state = SFC_ADAPTER_CONFIGURED; fail_bad_state: sfc_log_init(sa, "failed %d", rc); @@ -313,24 +418,20 @@ sfc_attach(struct sfc_adapter *sa) if (rc != 0) goto fail_nic_reset; - /* Initialize NIC to double-check hardware */ - sfc_log_init(sa, "init nic"); - rc = efx_nic_init(enp); + sfc_log_init(sa, "estimate resource limits"); + rc = sfc_estimate_resource_limits(sa); if (rc != 0) - goto fail_nic_init; + goto fail_estimate_rsrc_limits; sfc_log_init(sa, "fini nic"); efx_nic_fini(enp); - sa->rxq_max = 1; - sa->txq_max = 1; - sa->state = SFC_ADAPTER_INITIALIZED; sfc_log_init(sa, "done"); return 0; -fail_nic_init: +fail_estimate_rsrc_limits: fail_nic_reset: sfc_log_init(sa, "unprobe nic"); efx_nic_unprobe(enp);