From: Ciara Power Date: Wed, 21 Oct 2020 08:17:21 +0000 (+0100) Subject: doc: remove reference to make from tools guide X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=95fcf7bff48eedcf645bcbfe7d9d9e0eabfd2784;p=dpdk.git doc: remove reference to make from tools guide Make is no longer supported for compiling DPDK, references are now removed in the documentation. Signed-off-by: Ciara Power Reviewed-by: Kevin Laatz Acked-by: Nicolas Chautru --- diff --git a/doc/guides/tools/comp_perf.rst b/doc/guides/tools/comp_perf.rst index ee585d1024..6ba1076484 100644 --- a/doc/guides/tools/comp_perf.rst +++ b/doc/guides/tools/comp_perf.rst @@ -97,18 +97,6 @@ Application Options ``-h``: prints this help -Compiling the Tool ------------------- - -**Step 1: PMD setting** - -The ``dpdk-test-compress-perf`` tool depends on compression device drivers PMD which -can be disabled by default in the build configuration file ``common_base``. -The compression device drivers PMD which should be tested can be enabled by setting e.g.:: - - CONFIG_RTE_LIBRTE_PMD_ISAL=y - - Running the Tool ---------------- @@ -116,5 +104,5 @@ The tool has a number of command line options. Here is the sample command line: .. code-block:: console - ./build/app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 + .//app/dpdk-test-compress-perf -l 4 -- --driver-name compress_qat --input-file test.txt --seg-sz 8192 --compress-level 1:1:9 --num-iter 10 --extended-input-sz 1048576 --max-num-sgl-segs 16 --huffman-enc fixed diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst index 28b729dbda..29340d94e8 100644 --- a/doc/guides/tools/cryptoperf.rst +++ b/doc/guides/tools/cryptoperf.rst @@ -30,22 +30,9 @@ On hardware devices the throughput measurement is not necessarily the maximum possible for the device, e.g. it may be necessary to use multiple cores to keep the hardware accelerator fully loaded and so measure maximum throughput. -Compiling the Application -------------------------- -**Step 1: PMD setting** - -The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The crypto device drivers PMD which should be tested can be enabled by setting:: - - CONFIG_RTE_LIBRTE_PMD_=y - -Setting example for open ssl PMD:: - - CONFIG_RTE_LIBRTE_PMD_OPENSSL=y - -**Step 2: Linearization setting** +Linearization setting +--------------------- It is possible linearized input segmented packets just before crypto operation for devices which doesn't support scatter-gather, and allows to measure @@ -56,16 +43,6 @@ To set on the linearization options add below definition to the #define CPERF_LINEARIZATION_ENABLE -**Step 3: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-crypto-perf`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. -The user must have all libraries, modules, updates and compilers installed -in the system prior to this, -as described in the earlier chapters in this Getting Started Guide. Running the Application ----------------------- diff --git a/doc/guides/tools/pdump.rst b/doc/guides/tools/pdump.rst index 8a499c6c5b..6f9bd77ab1 100644 --- a/doc/guides/tools/pdump.rst +++ b/doc/guides/tools/pdump.rst @@ -19,12 +19,9 @@ a DPDK secondary process and is capable of enabling packet capture on dpdk ports framework initialization code. Refer ``app/test-pmd/testpmd.c`` code to see how this is done. - * The ``dpdk-pdump`` tool depends on libpcap based PMD which is disabled - by default in the build configuration files, - owing to an external dependency on the libpcap development files - which must be installed on the board. - Once the libpcap development files are installed, the libpcap based PMD - can be enabled by setting CONFIG_RTE_LIBRTE_PMD_PCAP=y and recompiling the DPDK. + * The ``dpdk-pdump`` tool depends on DPDK pcap PMD, so the system should + have libpcap development files installed and the pcap PMD not disabled + in the build. * The ``dpdk-pdump`` tool runs as a DPDK secondary process. It exits when the primary application exits. @@ -37,7 +34,7 @@ The tool has a number of command line options: .. code-block:: console - ./build/app/dpdk-pdump -- + .//app/dpdk-pdump -- [--multi] --pdump '(port= | device_id=), (queue=), @@ -120,5 +117,5 @@ Example .. code-block:: console - $ sudo ./build/app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' - $ sudo ./build/app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap' + $ sudo .//app/dpdk-pdump -l 3 -- --pdump 'port=0,queue=*,rx-dev=/tmp/rx.pcap' + $ sudo .//app/dpdk-pdump -l 3,4,5 -- --multi --pdump 'port=0,queue=*,rx-dev=/tmp/rx-1.pcap' --pdump 'port=1,queue=*,rx-dev=/tmp/rx-2.pcap' diff --git a/doc/guides/tools/proc_info.rst b/doc/guides/tools/proc_info.rst index 0390b9c589..9772d97ef0 100644 --- a/doc/guides/tools/proc_info.rst +++ b/doc/guides/tools/proc_info.rst @@ -17,7 +17,7 @@ The application has a number of command line options: .. code-block:: console - ./$(RTE_TARGET)/app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | + .//app/dpdk-procinfo -- -m | [-p PORTMASK] [--stats | --xstats | --stats-reset | --xstats-reset] [ --show-port | --show-tm | --show-crypto | --show-ring[=name] | --show-mempool[=name] | --iter-mempool=name ] diff --git a/doc/guides/tools/testbbdev.rst b/doc/guides/tools/testbbdev.rst index 9969231451..d397d991ff 100644 --- a/doc/guides/tools/testbbdev.rst +++ b/doc/guides/tools/testbbdev.rst @@ -10,31 +10,6 @@ Tests available for execution are: latency, throughput, validation, bler and sanity tests. Execution of tests can be customized using various parameters passed to a python running script. -Compiling the Application -------------------------- - -**Step 1: PMD setting** - -The ``dpdk-test-bbdev`` tool depends on crypto device drivers PMD which -are disabled by default in the build configuration file ``common_base``. -The bbdevice drivers PMD which should be tested can be enabled by setting - - ``CONFIG_RTE_LIBRTE_PMD_=y`` - -Setting example for (*baseband_turbo_sw*) PMD - - ``CONFIG_RTE_LIBRTE_PMD_BBDEV_TURBO_SW=y`` - -**Step 2: Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-bbdev`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. -The user must have all libraries, modules, updates and compilers installed -in the system prior to this, as described in the earlier chapters in this -Getting Started Guide. Running the Application ----------------------- @@ -60,7 +35,7 @@ The following are the command-line options: ``-p TESTAPP_PATH, --testapp_path TESTAPP_PATH`` Indicates the path to the bbdev test app. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with "*/build/app/testbbdev*". + on "../.." concatenated with "*/build/app/dpdk-test-bbdev*". ``-e EAL_PARAMS, --eal_params EAL_PARAMS`` Specifies EAL arguments which are passed to the test app. For more details, @@ -82,9 +57,8 @@ The following are the command-line options: ``-v TEST_VECTOR [TEST_VECTOR ...], --test_vector TEST_VECTOR [TEST_VECTOR ...]`` Specifies paths to the test vector files. If not specified path is set based - on *$RTE_SDK* environment variable concatenated with - "*/app/test-bbdev/test_vectors/bbdev_null.data*" and indicates default - data file. + on "../.." concatenated with "*/app/test-bbdev/test_vectors/bbdev_null.data*" + and indicates default data file. **Example usage:** @@ -259,8 +233,8 @@ They are chosen to have a good coverage across sizes and processing parameters while still keeping their number limited as part of sanity regression. -Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled for -x86_64-native-linux-icc target: +Shortened tree of isg_cid-wireless_dpdk_ae with dpdk compiled and output +to the build directory: :: @@ -268,16 +242,16 @@ x86_64-native-linux-icc target: |-- test-bbdev |-- test_vectors - |-- x86_64-native-linux-icc + |-- build |-- app - |-- testbbdev + |-- dpdk-test-bbdev All bbdev devices ~~~~~~~~~~~~~~~~~ .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -v turbo_dec_default.data It runs all available tests using the test vector filled based on @@ -291,7 +265,7 @@ baseband turbo_sw device .. code-block:: console - ./test-bbdev.py -p ../../x86_64-native-linux-icc/app/testbbdev + ./test-bbdev.py -p ../../build/app/dpdk-test-bbdev -e="--vdev=baseband_turbo_sw" -t 120 -c validation -v ./test_vectors/* -n 64 -b 8 32 diff --git a/doc/guides/tools/testeventdev.rst b/doc/guides/tools/testeventdev.rst index 2ed67a6340..ad1788a3d8 100644 --- a/doc/guides/tools/testeventdev.rst +++ b/doc/guides/tools/testeventdev.rst @@ -10,19 +10,6 @@ This application has a generic framework to add new eventdev based test cases to verify functionality and measure the performance parameters of DPDK eventdev devices. -Compiling the Application -------------------------- - -**Build the application** - -Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the -``dpdk-test-eventdev`` application. - -Initially, the user must select a DPDK target to choose the correct target type -and compiler options to use when building the libraries. -The user must have all libraries, modules, updates and compilers installed -in the system prior to this, -as described in the earlier chapters in this Getting Started Guide. Running the Application ----------------------- @@ -251,7 +238,7 @@ Example command to run order queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_sw0 -- \ + sudo /app/dpdk-test-eventdev --vdev=event_sw0 -- \ --test=order_queue --plcores 1 --wlcores 2,3 @@ -314,7 +301,7 @@ Example command to run order ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo /app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=order_atq --plcores 1 --wlcores 2,3 @@ -414,7 +401,7 @@ Example command to run perf queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ + sudo /app/dpdk-test-eventdev -c 0xf -s 0x1 --vdev=event_sw0 -- \ --test=perf_queue --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf queue test with ethernet ports: @@ -428,7 +415,7 @@ Example command to run perf queue test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo /app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_queue --stlist=a \ --prod_type_timerdev --fwd_latency @@ -514,14 +501,14 @@ Example command to run perf ``all types queue`` test: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev=event_octeontx -- \ + sudo /app/dpdk-test-eventdev --vdev=event_octeontx -- \ --test=perf_atq --plcores=2 --wlcore=3 --stlist=p --nb_pkts=0 Example command to run perf ``all types queue`` test with event timer adapter: .. code-block:: console - sudo build/app/dpdk-test-eventdev --vdev="event_octeontx" -- \ + sudo /app/dpdk-test-eventdev --vdev="event_octeontx" -- \ --wlcores 4 --plcores 12 --test perf_atq --verbose 20 \ --stlist=a --prod_type_timerdev --fwd_latency @@ -633,7 +620,7 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo /app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_queue --wlcore=1 --prod_type_ethdev --stlist=a @@ -725,5 +712,5 @@ Example command to run pipeline queue test: .. code-block:: console - sudo build/app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ + sudo /app/dpdk-test-eventdev -c 0xf -s 0x8 --vdev=event_sw0 -- \ --test=pipeline_atq --wlcore=1 --prod_type_ethdev --stlist=a