From: Anatoly Burakov Date: Tue, 12 Sep 2017 09:36:26 +0000 (+0100) Subject: app/crypto-perf: add new PMD benchmarking mode X-Git-Tag: spdx-start~1426 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=96dfeb609be1;p=dpdk.git app/crypto-perf: add new PMD benchmarking mode This patch adds a new benchmarking mode, which is intended for microbenchmarking individual parts of the cryptodev framework, specifically crypto ops alloc-build-free, cryptodev PMD enqueue and cryptodev PMD dequeue. It works by first benchmarking crypto operation alloc-build-free loop (no enqueues/dequeues happening), and then benchmarking enqueue and dequeue separately, by first completely filling up the TX queue, and then completely draining the RX queue. Results are shown as cycle counts per alloc/build/free, PMD enqueue and PMD dequeue. One new test mode is added: "pmd-cyclecount" (called with --ptest=pmd-cyclecount) New command-line argument is also added: --pmd-cyclecount-delay-ms: this is a pmd-cyclecount-specific parameter that controls the delay between enqueue and dequeue. This is useful for benchmarking hardware acceleration, as hardware may not be able to keep up with enqueued packets. This parameter can be increased if there are large amounts of dequeue retries. Signed-off-by: Anatoly Burakov Reviewed-by: Pablo de Lara --- diff --git a/app/test-crypto-perf/Makefile b/app/test-crypto-perf/Makefile index e4a989fe69..821e8e5960 100644 --- a/app/test-crypto-perf/Makefile +++ b/app/test-crypto-perf/Makefile @@ -42,6 +42,7 @@ SRCS-y += cperf_options_parsing.c SRCS-y += cperf_test_vectors.c SRCS-y += cperf_test_throughput.c SRCS-y += cperf_test_latency.c +SRCS-y += cperf_test_pmd_cyclecount.c SRCS-y += cperf_test_verify.c SRCS-y += cperf_test_vector_parsing.c diff --git a/app/test-crypto-perf/cperf_options.h b/app/test-crypto-perf/cperf_options.h index edd6b793d7..2f42cb61bd 100644 --- a/app/test-crypto-perf/cperf_options.h +++ b/app/test-crypto-perf/cperf_options.h @@ -41,12 +41,16 @@ #define CPERF_CSV ("csv-friendly") +/* benchmark-specific options */ +#define CPERF_PMDCC_DELAY_MS ("pmd-cyclecount-delay-ms") + #define MAX_LIST 32 enum cperf_perf_test_type { CPERF_TEST_TYPE_THROUGHPUT, CPERF_TEST_TYPE_LATENCY, - CPERF_TEST_TYPE_VERIFY + CPERF_TEST_TYPE_VERIFY, + CPERF_TEST_TYPE_PMDCC }; @@ -115,6 +119,8 @@ struct cperf_options { uint32_t min_burst_size; uint32_t inc_burst_size; + /* pmd-cyclecount specific options */ + uint32_t pmdcc_delay; }; void diff --git a/app/test-crypto-perf/cperf_options_parsing.c b/app/test-crypto-perf/cperf_options_parsing.c index 142165670d..f3508a474d 100644 --- a/app/test-crypto-perf/cperf_options_parsing.c +++ b/app/test-crypto-perf/cperf_options_parsing.c @@ -76,6 +76,10 @@ parse_cperf_test_type(struct cperf_options *opts, const char *arg) { cperf_test_type_strs[CPERF_TEST_TYPE_LATENCY], CPERF_TEST_TYPE_LATENCY + }, + { + cperf_test_type_strs[CPERF_TEST_TYPE_PMDCC], + CPERF_TEST_TYPE_PMDCC } }; @@ -643,6 +647,20 @@ parse_csv_friendly(struct cperf_options *opts, const char *arg __rte_unused) return 0; } +static int +parse_pmd_cyclecount_delay_ms(struct cperf_options *opts, + const char *arg) +{ + int ret = parse_uint32_t(&opts->pmdcc_delay, arg); + + if (ret) { + RTE_LOG(ERR, USER1, "failed to parse pmd-cyclecount delay\n"); + return -1; + } + + return 0; +} + typedef int (*option_parser_t)(struct cperf_options *opts, const char *arg); @@ -695,6 +713,8 @@ static struct option lgopts[] = { { CPERF_CSV, no_argument, 0, 0}, + { CPERF_PMDCC_DELAY_MS, required_argument, 0, 0 }, + { NULL, 0, 0, 0 } }; @@ -749,6 +769,8 @@ cperf_options_default(struct cperf_options *opts) opts->aead_aad_sz = 0; opts->digest_sz = 12; + + opts->pmdcc_delay = 0; } static int @@ -784,6 +806,7 @@ cperf_opts_parse_long(int opt_idx, struct cperf_options *opts) { CPERF_AEAD_AAD_SZ, parse_aead_aad_sz }, { CPERF_DIGEST_SZ, parse_digest_sz }, { CPERF_CSV, parse_csv_friendly}, + { CPERF_PMDCC_DELAY_MS, parse_pmd_cyclecount_delay_ms}, }; unsigned int i; @@ -927,6 +950,14 @@ cperf_options_check(struct cperf_options *options) return -EINVAL; } + if (options->test == CPERF_TEST_TYPE_PMDCC && + options->pool_sz < options->nb_descriptors) { + RTE_LOG(ERR, USER1, "For pmd cyclecount benchmarks, pool size " + "must be equal or greater than the number of " + "cryptodev descriptors.\n"); + return -EINVAL; + } + if (options->op_type == CPERF_CIPHER_THEN_AUTH) { if (options->cipher_op != RTE_CRYPTO_CIPHER_OP_ENCRYPT && options->auth_op != @@ -995,6 +1026,8 @@ cperf_options_dump(struct cperf_options *opts) printf("# crypto operation: %s\n", cperf_op_type_strs[opts->op_type]); printf("# sessionless: %s\n", opts->sessionless ? "yes" : "no"); printf("# out of place: %s\n", opts->out_of_place ? "yes" : "no"); + if (opts->test == CPERF_TEST_TYPE_PMDCC) + printf("# inter-burst delay: %u ms\n", opts->pmdcc_delay); printf("#\n"); diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.c b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c new file mode 100644 index 0000000000..0c949f0925 --- /dev/null +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.c @@ -0,0 +1,675 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2017 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include + +#include +#include +#include +#include + +#include "cperf_ops.h" +#include "cperf_test_pmd_cyclecount.h" + +#define PRETTY_HDR_FMT "%12s%12s%12s%12s%12s%12s%12s%12s%12s%12s\n\n" +#define PRETTY_LINE_FMT "%12u%12u%12u%12u%12u%12u%12u%12.0f%12.0f%12.0f\n" +#define CSV_HDR_FMT "%s,%s,%s,%s,%s,%s,%s,%s,%s,%s\n" +#define CSV_LINE_FMT "%10u;%10u;%u;%u;%u;%u;%u;%.f3;%.f3;%.f3\n" + +struct cperf_pmd_cyclecount_ctx { + uint8_t dev_id; + uint16_t qp_id; + uint8_t lcore_id; + + struct rte_mempool *pkt_mbuf_pool_in; + struct rte_mempool *pkt_mbuf_pool_out; + struct rte_mbuf **mbufs_in; + struct rte_mbuf **mbufs_out; + + struct rte_mempool *crypto_op_pool; + struct rte_crypto_op **ops; + struct rte_crypto_op **ops_processed; + + struct rte_cryptodev_sym_session *sess; + + cperf_populate_ops_t populate_ops; + + const struct cperf_options *options; + const struct cperf_test_vector *test_vector; +}; + +struct pmd_cyclecount_state { + struct cperf_pmd_cyclecount_ctx *ctx; + const struct cperf_options *opts; + uint32_t lcore; + uint64_t delay; + int linearize; + uint32_t ops_enqd; + uint32_t ops_deqd; + uint32_t ops_enq_retries; + uint32_t ops_deq_retries; + double cycles_per_build; + double cycles_per_enq; + double cycles_per_deq; +}; + +static const uint16_t iv_offset = + sizeof(struct rte_crypto_op) + sizeof(struct rte_crypto_sym_op); + +static void +cperf_pmd_cyclecount_test_free(struct cperf_pmd_cyclecount_ctx *ctx, + uint32_t mbuf_nb) +{ + uint32_t i; + + if (ctx) { + if (ctx->sess) { + rte_cryptodev_sym_session_clear(ctx->dev_id, ctx->sess); + rte_cryptodev_sym_session_free(ctx->sess); + } + + if (ctx->mbufs_in) { + for (i = 0; i < mbuf_nb; i++) + rte_pktmbuf_free(ctx->mbufs_in[i]); + + rte_free(ctx->mbufs_in); + } + + if (ctx->mbufs_out) { + for (i = 0; i < mbuf_nb; i++) { + if (ctx->mbufs_out[i] != NULL) + rte_pktmbuf_free(ctx->mbufs_out[i]); + } + + rte_free(ctx->mbufs_out); + } + + if (ctx->pkt_mbuf_pool_in) + rte_mempool_free(ctx->pkt_mbuf_pool_in); + + if (ctx->pkt_mbuf_pool_out) + rte_mempool_free(ctx->pkt_mbuf_pool_out); + + if (ctx->ops) + rte_free(ctx->ops); + + if (ctx->ops_processed) + rte_free(ctx->ops_processed); + + if (ctx->crypto_op_pool) + rte_mempool_free(ctx->crypto_op_pool); + + rte_free(ctx); + } +} + +static struct rte_mbuf * +cperf_mbuf_create(struct rte_mempool *mempool, uint32_t segments_nb, + const struct cperf_options *options, + const struct cperf_test_vector *test_vector) +{ + struct rte_mbuf *mbuf; + uint32_t segment_sz = options->max_buffer_size / segments_nb; + uint32_t last_sz = options->max_buffer_size % segments_nb; + uint8_t *mbuf_data; + uint8_t *test_data = + (options->cipher_op == RTE_CRYPTO_CIPHER_OP_ENCRYPT) ? + test_vector->plaintext.data : + test_vector->ciphertext.data; + + mbuf = rte_pktmbuf_alloc(mempool); + if (mbuf == NULL) + goto error; + + mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz); + if (mbuf_data == NULL) + goto error; + + memcpy(mbuf_data, test_data, segment_sz); + test_data += segment_sz; + segments_nb--; + + while (segments_nb) { + struct rte_mbuf *m; + + m = rte_pktmbuf_alloc(mempool); + if (m == NULL) + goto error; + + rte_pktmbuf_chain(mbuf, m); + + mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, segment_sz); + if (mbuf_data == NULL) + goto error; + + memcpy(mbuf_data, test_data, segment_sz); + test_data += segment_sz; + segments_nb--; + } + + if (last_sz) { + mbuf_data = (uint8_t *)rte_pktmbuf_append(mbuf, last_sz); + if (mbuf_data == NULL) + goto error; + + memcpy(mbuf_data, test_data, last_sz); + } + + if (options->op_type != CPERF_CIPHER_ONLY) { + mbuf_data = (uint8_t *)rte_pktmbuf_append( + mbuf, options->digest_sz); + if (mbuf_data == NULL) + goto error; + } + + if (options->op_type == CPERF_AEAD) { + uint8_t *aead = (uint8_t *)rte_pktmbuf_prepend( + mbuf, RTE_ALIGN_CEIL(options->aead_aad_sz, 16)); + + if (aead == NULL) + goto error; + + memcpy(aead, test_vector->aad.data, test_vector->aad.length); + } + + return mbuf; +error: + if (mbuf != NULL) + rte_pktmbuf_free(mbuf); + + return NULL; +} + +void * +cperf_pmd_cyclecount_test_constructor(struct rte_mempool *sess_mp, + uint8_t dev_id, uint16_t qp_id, + const struct cperf_options *options, + const struct cperf_test_vector *test_vector, + const struct cperf_op_fns *op_fns) +{ + struct cperf_pmd_cyclecount_ctx *ctx = NULL; + unsigned int mbuf_idx = 0; + char pool_name[32] = ""; + uint16_t dataroom_sz = RTE_PKTMBUF_HEADROOM + + RTE_CACHE_LINE_ROUNDUP( + (options->max_buffer_size / + options->segments_nb) + + (options->max_buffer_size % + options->segments_nb) + + options->digest_sz); + + /* preallocate buffers for crypto ops as they can get quite big */ + size_t alloc_sz = sizeof(struct rte_crypto_op *) * + options->nb_descriptors; + + ctx = rte_malloc(NULL, sizeof(struct cperf_pmd_cyclecount_ctx), 0); + if (ctx == NULL) + goto err; + + ctx->dev_id = dev_id; + ctx->qp_id = qp_id; + + ctx->populate_ops = op_fns->populate_ops; + ctx->options = options; + ctx->test_vector = test_vector; + + /* IV goes at the end of the crypto operation */ + uint16_t iv_offset = sizeof(struct rte_crypto_op) + + sizeof(struct rte_crypto_sym_op); + + ctx->sess = op_fns->sess_create( + sess_mp, dev_id, options, test_vector, iv_offset); + if (ctx->sess == NULL) + goto err; + + snprintf(pool_name, sizeof(pool_name), "cperf_pool_in_cdev_%d", dev_id); + + ctx->pkt_mbuf_pool_in = rte_pktmbuf_pool_create(pool_name, + options->pool_sz * options->segments_nb, 0, 0, + dataroom_sz, rte_socket_id()); + + if (ctx->pkt_mbuf_pool_in == NULL) + goto err; + + /* Generate mbufs_in with plaintext populated for test */ + ctx->mbufs_in = rte_malloc(NULL, + (sizeof(struct rte_mbuf *) * options->pool_sz), 0); + + for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) { + ctx->mbufs_in[mbuf_idx] = cperf_mbuf_create( + ctx->pkt_mbuf_pool_in, options->segments_nb, + options, test_vector); + if (ctx->mbufs_in[mbuf_idx] == NULL) + goto err; + } + + if (options->out_of_place == 1) { + snprintf(pool_name, sizeof(pool_name), "cperf_pool_out_cdev_%d", + dev_id); + + ctx->pkt_mbuf_pool_out = rte_pktmbuf_pool_create(pool_name, + options->pool_sz, 0, 0, dataroom_sz, + rte_socket_id()); + + if (ctx->pkt_mbuf_pool_out == NULL) + goto err; + } + + ctx->mbufs_out = rte_malloc(NULL, + (sizeof(struct rte_mbuf *) * options->pool_sz), 0); + + for (mbuf_idx = 0; mbuf_idx < options->pool_sz; mbuf_idx++) { + if (options->out_of_place == 1) { + ctx->mbufs_out[mbuf_idx] = cperf_mbuf_create( + ctx->pkt_mbuf_pool_out, 1, options, + test_vector); + if (ctx->mbufs_out[mbuf_idx] == NULL) + goto err; + } else { + ctx->mbufs_out[mbuf_idx] = NULL; + } + } + + snprintf(pool_name, sizeof(pool_name), "cperf_op_pool_cdev_%d", dev_id); + + uint16_t priv_size = test_vector->cipher_iv.length + + test_vector->auth_iv.length + + test_vector->aead_iv.length; + + ctx->crypto_op_pool = rte_crypto_op_pool_create(pool_name, + RTE_CRYPTO_OP_TYPE_SYMMETRIC, options->pool_sz, 512, + priv_size, rte_socket_id()); + if (ctx->crypto_op_pool == NULL) + goto err; + + ctx->ops = rte_malloc("ops", alloc_sz, 0); + if (!ctx->ops) + goto err; + + ctx->ops_processed = rte_malloc("ops_processed", alloc_sz, 0); + if (!ctx->ops_processed) + goto err; + + return ctx; + +err: + cperf_pmd_cyclecount_test_free(ctx, mbuf_idx); + + return NULL; +} + +/* benchmark alloc-build-free of ops */ +static inline int +pmd_cyclecount_bench_ops(struct pmd_cyclecount_state *state, uint32_t cur_op, + uint16_t test_burst_size) +{ + uint32_t iter_ops_left = state->opts->total_ops - cur_op; + uint32_t iter_ops_needed = + RTE_MIN(state->opts->nb_descriptors, iter_ops_left); + uint32_t cur_iter_op; + + for (cur_iter_op = 0; cur_iter_op < iter_ops_needed; + cur_iter_op += test_burst_size) { + uint32_t burst_size = RTE_MIN(state->opts->total_ops - cur_op, + test_burst_size); + struct rte_crypto_op **ops = &state->ctx->ops[cur_iter_op]; + + if (burst_size != rte_crypto_op_bulk_alloc( + state->ctx->crypto_op_pool, + RTE_CRYPTO_OP_TYPE_SYMMETRIC, + ops, burst_size)) + return -1; + + /* Setup crypto op, attach mbuf etc */ + (state->ctx->populate_ops)(ops, + &state->ctx->mbufs_in[cur_iter_op], + &state->ctx->mbufs_out[cur_iter_op], burst_size, + state->ctx->sess, state->opts, + state->ctx->test_vector, iv_offset); + +#ifdef CPERF_LINEARIZATION_ENABLE + /* Check if source mbufs require coalescing */ + if (state->linearize) { + uint8_t i; + for (i = 0; i < burst_size; i++) { + struct rte_mbuf *src = ops[i]->sym->m_src; + rte_pktmbuf_linearize(src); + } + } +#endif /* CPERF_LINEARIZATION_ENABLE */ + rte_mempool_put_bulk(state->ctx->crypto_op_pool, (void **)ops, + burst_size); + } + + return 0; +} + +/* allocate and build ops (no free) */ +static int +pmd_cyclecount_build_ops(struct pmd_cyclecount_state *state, + uint32_t iter_ops_needed, uint16_t test_burst_size) +{ + uint32_t cur_iter_op; + + for (cur_iter_op = 0; cur_iter_op < iter_ops_needed; + cur_iter_op += test_burst_size) { + uint32_t burst_size = RTE_MIN( + iter_ops_needed - cur_iter_op, test_burst_size); + struct rte_crypto_op **ops = &state->ctx->ops[cur_iter_op]; + + if (burst_size != rte_crypto_op_bulk_alloc( + state->ctx->crypto_op_pool, + RTE_CRYPTO_OP_TYPE_SYMMETRIC, + ops, burst_size)) + return -1; + + /* Setup crypto op, attach mbuf etc */ + (state->ctx->populate_ops)(ops, + &state->ctx->mbufs_in[cur_iter_op], + &state->ctx->mbufs_out[cur_iter_op], burst_size, + state->ctx->sess, state->opts, + state->ctx->test_vector, iv_offset); + } + return 0; +} + +/* benchmark enqueue, returns number of ops enqueued */ +static uint32_t +pmd_cyclecount_bench_enq(struct pmd_cyclecount_state *state, + uint32_t iter_ops_needed, uint16_t test_burst_size) +{ + /* Enqueue full descriptor ring of ops on crypto device */ + uint32_t cur_iter_op = 0; + while (cur_iter_op < iter_ops_needed) { + uint32_t burst_size = RTE_MIN(iter_ops_needed - cur_iter_op, + test_burst_size); + struct rte_crypto_op **ops = &state->ctx->ops[cur_iter_op]; + uint32_t burst_enqd; + + burst_enqd = rte_cryptodev_enqueue_burst(state->ctx->dev_id, + state->ctx->qp_id, ops, burst_size); + + /* if we couldn't enqueue anything, the queue is full */ + if (!burst_enqd) { + /* don't try to dequeue anything we didn't enqueue */ + return cur_iter_op; + } + + if (burst_enqd < burst_size) + state->ops_enq_retries++; + state->ops_enqd += burst_enqd; + cur_iter_op += burst_enqd; + } + return iter_ops_needed; +} + +/* benchmark dequeue */ +static void +pmd_cyclecount_bench_deq(struct pmd_cyclecount_state *state, + uint32_t iter_ops_needed, uint16_t test_burst_size) +{ + /* Dequeue full descriptor ring of ops on crypto device */ + uint32_t cur_iter_op = 0; + while (cur_iter_op < iter_ops_needed) { + uint32_t burst_size = RTE_MIN(iter_ops_needed - cur_iter_op, + test_burst_size); + struct rte_crypto_op **ops_processed = + &state->ctx->ops[cur_iter_op]; + uint32_t burst_deqd; + + burst_deqd = rte_cryptodev_dequeue_burst(state->ctx->dev_id, + state->ctx->qp_id, ops_processed, burst_size); + + if (burst_deqd < burst_size) + state->ops_deq_retries++; + state->ops_deqd += burst_deqd; + cur_iter_op += burst_deqd; + } +} + +/* run benchmark per burst size */ +static inline int +pmd_cyclecount_bench_burst_sz( + struct pmd_cyclecount_state *state, uint16_t test_burst_size) +{ + uint64_t tsc_start; + uint64_t tsc_end; + uint64_t tsc_op; + uint64_t tsc_enq; + uint64_t tsc_deq; + uint32_t cur_op; + + /* reset all counters */ + tsc_enq = 0; + tsc_deq = 0; + state->ops_enqd = 0; + state->ops_enq_retries = 0; + state->ops_deqd = 0; + state->ops_deq_retries = 0; + + /* + * Benchmark crypto op alloc-build-free separately. + */ + tsc_start = rte_rdtsc_precise(); + + for (cur_op = 0; cur_op < state->opts->total_ops; + cur_op += state->opts->nb_descriptors) { + if (unlikely(pmd_cyclecount_bench_ops( + state, cur_op, test_burst_size))) + return -1; + } + + tsc_end = rte_rdtsc_precise(); + tsc_op = tsc_end - tsc_start; + + + /* + * Hardware acceleration cyclecount benchmarking loop. + * + * We're benchmarking raw enq/deq performance by filling up the device + * queue, so we never get any failed enqs unless the driver won't accept + * the exact number of descriptors we requested, or the driver won't + * wrap around the end of the TX ring. However, since we're only + * dequeueing once we've filled up the queue, we have to benchmark it + * piecemeal and then average out the results. + */ + cur_op = 0; + while (cur_op < state->opts->total_ops) { + uint32_t iter_ops_left = state->opts->total_ops - cur_op; + uint32_t iter_ops_needed = RTE_MIN( + state->opts->nb_descriptors, iter_ops_left); + uint32_t iter_ops_allocd = iter_ops_needed; + + /* allocate and build ops */ + if (unlikely(pmd_cyclecount_build_ops(state, iter_ops_needed, + test_burst_size))) + return -1; + + tsc_start = rte_rdtsc_precise(); + + /* fill up TX ring */ + iter_ops_needed = pmd_cyclecount_bench_enq(state, + iter_ops_needed, test_burst_size); + + tsc_end = rte_rdtsc_precise(); + + tsc_enq += tsc_end - tsc_start; + + /* allow for HW to catch up */ + if (state->delay) + rte_delay_us_block(state->delay); + + tsc_start = rte_rdtsc_precise(); + + /* drain RX ring */ + pmd_cyclecount_bench_deq(state, iter_ops_needed, + test_burst_size); + + tsc_end = rte_rdtsc_precise(); + + tsc_deq += tsc_end - tsc_start; + + cur_op += iter_ops_needed; + + /* + * we may not have processed all ops that we allocated, so + * free everything we've allocated. + */ + rte_mempool_put_bulk(state->ctx->crypto_op_pool, + (void **)state->ctx->ops, iter_ops_allocd); + } + + state->cycles_per_build = (double)tsc_op / state->opts->total_ops; + state->cycles_per_enq = (double)tsc_enq / state->ops_enqd; + state->cycles_per_deq = (double)tsc_deq / state->ops_deqd; + + return 0; +} + +int +cperf_pmd_cyclecount_test_runner(void *test_ctx) +{ + struct pmd_cyclecount_state state = {0}; + const struct cperf_options *opts; + uint16_t test_burst_size; + uint8_t burst_size_idx = 0; + + state.ctx = test_ctx; + opts = state.ctx->options; + state.opts = opts; + state.lcore = rte_lcore_id(); + state.linearize = 0; + + static int only_once; + static bool warmup = true; + + /* + * We need a small delay to allow for hardware to process all the crypto + * operations. We can't automatically figure out what the delay should + * be, so we leave it up to the user (by default it's 0). + */ + state.delay = 1000 * opts->pmdcc_delay; + +#ifdef CPERF_LINEARIZATION_ENABLE + struct rte_cryptodev_info dev_info; + + /* Check if source mbufs require coalescing */ + if (opts->segments_nb > 1) { + rte_cryptodev_info_get(state.ctx->dev_id, &dev_info); + if ((dev_info.feature_flags & + RTE_CRYPTODEV_FF_MBUF_SCATTER_GATHER) == + 0) { + state.linearize = 1; + } + } +#endif /* CPERF_LINEARIZATION_ENABLE */ + + state.ctx->lcore_id = state.lcore; + + /* Get first size from range or list */ + if (opts->inc_burst_size != 0) + test_burst_size = opts->min_burst_size; + else + test_burst_size = opts->burst_size_list[0]; + + while (test_burst_size <= opts->max_burst_size) { + /* do a benchmark run */ + if (pmd_cyclecount_bench_burst_sz(&state, test_burst_size)) + return -1; + + /* + * First run is always a warm up run. + */ + if (warmup) { + warmup = false; + continue; + } + + if (!opts->csv) { + if (!only_once) + printf(PRETTY_HDR_FMT, "lcore id", "Buf Size", + "Burst Size", "Enqueued", + "Dequeued", "Enq Retries", + "Deq Retries", "Cycles/Op", + "Cycles/Enq", "Cycles/Deq"); + only_once = 1; + + printf(PRETTY_LINE_FMT, state.ctx->lcore_id, + opts->test_buffer_size, test_burst_size, + state.ops_enqd, state.ops_deqd, + state.ops_enq_retries, + state.ops_deq_retries, + state.cycles_per_build, + state.cycles_per_enq, + state.cycles_per_deq); + } else { + if (!only_once) + printf(CSV_HDR_FMT, "# lcore id", "Buf Size", + "Burst Size", "Enqueued", + "Dequeued", "Enq Retries", + "Deq Retries", "Cycles/Op", + "Cycles/Enq", "Cycles/Deq"); + only_once = 1; + + printf(CSV_LINE_FMT, state.ctx->lcore_id, + opts->test_buffer_size, test_burst_size, + state.ops_enqd, state.ops_deqd, + state.ops_enq_retries, + state.ops_deq_retries, + state.cycles_per_build, + state.cycles_per_enq, + state.cycles_per_deq); + } + + /* Get next size from range or list */ + if (opts->inc_burst_size != 0) + test_burst_size += opts->inc_burst_size; + else { + if (++burst_size_idx == opts->burst_size_count) + break; + test_burst_size = opts->burst_size_list[burst_size_idx]; + } + } + + return 0; +} + +void +cperf_pmd_cyclecount_test_destructor(void *arg) +{ + struct cperf_pmd_cyclecount_ctx *ctx = arg; + + if (ctx == NULL) + return; + + cperf_pmd_cyclecount_test_free(ctx, ctx->options->pool_sz); +} diff --git a/app/test-crypto-perf/cperf_test_pmd_cyclecount.h b/app/test-crypto-perf/cperf_test_pmd_cyclecount.h new file mode 100644 index 0000000000..93f0eae04c --- /dev/null +++ b/app/test-crypto-perf/cperf_test_pmd_cyclecount.h @@ -0,0 +1,61 @@ +/*- + * BSD LICENSE + * + * Copyright(c) 2017 Intel Corporation. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef _CPERF_TEST_PMD_CYCLECOUNT_H_ +#define _CPERF_TEST_PMD_CYCLECOUNT_H_ + +#include + +#include + +#include "cperf.h" +#include "cperf_ops.h" +#include "cperf_options.h" +#include "cperf_test_vectors.h" + + +void * +cperf_pmd_cyclecount_test_constructor( + struct rte_mempool *sess_mp, + uint8_t dev_id, + uint16_t qp_id, + const struct cperf_options *options, + const struct cperf_test_vector *test_vector, + const struct cperf_op_fns *ops_fn); + +int +cperf_pmd_cyclecount_test_runner(void *test_ctx); + +void +cperf_pmd_cyclecount_test_destructor(void *test_ctx); + +#endif /* _CPERF_TEST_PMD_CYCLECOUNT_H_ */ diff --git a/app/test-crypto-perf/main.c b/app/test-crypto-perf/main.c index 7e6ca8e070..ffa7180d51 100644 --- a/app/test-crypto-perf/main.c +++ b/app/test-crypto-perf/main.c @@ -42,6 +42,7 @@ #include "cperf_test_throughput.h" #include "cperf_test_latency.h" #include "cperf_test_verify.h" +#include "cperf_test_pmd_cyclecount.h" #define NUM_SESSIONS 2048 #define SESS_MEMPOOL_CACHE_SIZE 64 @@ -49,7 +50,8 @@ const char *cperf_test_type_strs[] = { [CPERF_TEST_TYPE_THROUGHPUT] = "throughput", [CPERF_TEST_TYPE_LATENCY] = "latency", - [CPERF_TEST_TYPE_VERIFY] = "verify" + [CPERF_TEST_TYPE_VERIFY] = "verify", + [CPERF_TEST_TYPE_PMDCC] = "pmd-cyclecount" }; const char *cperf_op_type_strs[] = { @@ -75,6 +77,11 @@ const struct cperf_test cperf_testmap[] = { cperf_verify_test_constructor, cperf_verify_test_runner, cperf_verify_test_destructor + }, + [CPERF_TEST_TYPE_PMDCC] = { + cperf_pmd_cyclecount_test_constructor, + cperf_pmd_cyclecount_test_runner, + cperf_pmd_cyclecount_test_destructor } }; diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst index 24f6e717b1..c60424935b 100644 --- a/doc/guides/rel_notes/release_17_11.rst +++ b/doc/guides/rel_notes/release_17_11.rst @@ -89,6 +89,12 @@ New Features * Coalesce writes to HEAD CSR on response processing. * Coalesce writes to TAIL CSR on request processing. +* **Add new benchmarking mode to dpdk-test-crypto-perf application.** + + Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application + that displays more detailed breakdown of CPU cycles used by hardware + acceleration. + * **Added IOMMU support to libvhost-user** Implemented device IOTLB in Vhost-user backend, and enabled Virtio's IOMMU diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst index d2a6f82c56..2f526c6c16 100644 --- a/doc/guides/tools/cryptoperf.rst +++ b/doc/guides/tools/cryptoperf.rst @@ -50,7 +50,8 @@ offload are still consumed by the test tool and included in the cycle-count. These cycles are consumed by retries and inefficient API calls enqueuing and dequeuing smaller bursts than specified by the cmdline parameter. This results in a larger cycle-count measurement and should not be interpreted as an offload -cost measurement. +cost measurement. Using "pmd-cyclecount" mode will give a better idea of +actual costs of hardware acceleration. On hardware devices the throughput measurement is not necessarily the maximum possible for the device, e.g. it may be necessary to use multiple cores to keep @@ -134,6 +135,7 @@ The following are the appication command-line options: throughput latency verify + pmd-cyclecount * ``--silent`` @@ -329,6 +331,12 @@ The following are the appication command-line options: Set number of descriptors for each crypto device. +* ``--pmd-cyclecount-delay-ms `` + + Add a delay (in milliseconds) between enqueue and dequeue in + pmd-cyclecount benchmarking mode (useful when benchmarking + hardware acceleration). + * ``--csv-friendly`` Enable test result output CSV friendly rather than human friendly.