From: Hemant Agrawal Date: Fri, 26 May 2017 06:51:21 +0000 (+0530) Subject: net/dpaa2: add support for flow control X-Git-Tag: spdx-start~3125 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=977d0006ada1;p=dpdk.git net/dpaa2: add support for flow control Signed-off-by: Hemant Agrawal --- diff --git a/doc/guides/nics/features/dpaa2.ini b/doc/guides/nics/features/dpaa2.ini index 4b1e000cfa..720c35b6f8 100644 --- a/doc/guides/nics/features/dpaa2.ini +++ b/doc/guides/nics/features/dpaa2.ini @@ -12,6 +12,7 @@ Allmulticast mode = Y Unicast MAC filter = Y RSS hash = Y VLAN filter = Y +Flow control = Y VLAN offload = Y L3 checksum offload = Y L4 checksum offload = Y diff --git a/drivers/net/dpaa2/dpaa2_ethdev.c b/drivers/net/dpaa2/dpaa2_ethdev.c index fa9db17b8d..edff04ac3d 100644 --- a/drivers/net/dpaa2/dpaa2_ethdev.c +++ b/drivers/net/dpaa2/dpaa2_ethdev.c @@ -1105,6 +1105,146 @@ dpaa2_dev_set_link_down(struct rte_eth_dev *dev) return ret; } +static int +dpaa2_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) +{ + int ret = -EINVAL; + struct dpaa2_dev_priv *priv; + struct fsl_mc_io *dpni; + struct dpni_link_state state = {0}; + + PMD_INIT_FUNC_TRACE(); + + priv = dev->data->dev_private; + dpni = (struct fsl_mc_io *)priv->hw; + + if (dpni == NULL || fc_conf == NULL) { + RTE_LOG(ERR, PMD, "device not configured"); + return ret; + } + + ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state); + if (ret) { + RTE_LOG(ERR, PMD, "error: dpni_get_link_state %d", ret); + return ret; + } + + memset(fc_conf, 0, sizeof(struct rte_eth_fc_conf)); + if (state.options & DPNI_LINK_OPT_PAUSE) { + /* DPNI_LINK_OPT_PAUSE set + * if ASYM_PAUSE not set, + * RX Side flow control (handle received Pause frame) + * TX side flow control (send Pause frame) + * if ASYM_PAUSE set, + * RX Side flow control (handle received Pause frame) + * No TX side flow control (send Pause frame disabled) + */ + if (!(state.options & DPNI_LINK_OPT_ASYM_PAUSE)) + fc_conf->mode = RTE_FC_FULL; + else + fc_conf->mode = RTE_FC_RX_PAUSE; + } else { + /* DPNI_LINK_OPT_PAUSE not set + * if ASYM_PAUSE set, + * TX side flow control (send Pause frame) + * No RX side flow control (No action on pause frame rx) + * if ASYM_PAUSE not set, + * Flow control disabled + */ + if (state.options & DPNI_LINK_OPT_ASYM_PAUSE) + fc_conf->mode = RTE_FC_TX_PAUSE; + else + fc_conf->mode = RTE_FC_NONE; + } + + return ret; +} + +static int +dpaa2_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) +{ + int ret = -EINVAL; + struct dpaa2_dev_priv *priv; + struct fsl_mc_io *dpni; + struct dpni_link_state state = {0}; + struct dpni_link_cfg cfg = {0}; + + PMD_INIT_FUNC_TRACE(); + + priv = dev->data->dev_private; + dpni = (struct fsl_mc_io *)priv->hw; + + if (dpni == NULL) { + RTE_LOG(ERR, PMD, "dpni is NULL"); + return ret; + } + + /* It is necessary to obtain the current state before setting fc_conf + * as MC would return error in case rate, autoneg or duplex values are + * different. + */ + ret = dpni_get_link_state(dpni, CMD_PRI_LOW, priv->token, &state); + if (ret) { + RTE_LOG(ERR, PMD, "Unable to get link state (err=%d)", ret); + return -1; + } + + /* Disable link before setting configuration */ + dpaa2_dev_set_link_down(dev); + + /* Based on fc_conf, update cfg */ + cfg.rate = state.rate; + cfg.options = state.options; + + /* update cfg with fc_conf */ + switch (fc_conf->mode) { + case RTE_FC_FULL: + /* Full flow control; + * OPT_PAUSE set, ASYM_PAUSE not set + */ + cfg.options |= DPNI_LINK_OPT_PAUSE; + cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE; + case RTE_FC_TX_PAUSE: + /* Enable RX flow control + * OPT_PAUSE not set; + * ASYM_PAUSE set; + */ + cfg.options |= DPNI_LINK_OPT_ASYM_PAUSE; + cfg.options &= ~DPNI_LINK_OPT_PAUSE; + break; + case RTE_FC_RX_PAUSE: + /* Enable TX Flow control + * OPT_PAUSE set + * ASYM_PAUSE set + */ + cfg.options |= DPNI_LINK_OPT_PAUSE; + cfg.options |= DPNI_LINK_OPT_ASYM_PAUSE; + break; + case RTE_FC_NONE: + /* Disable Flow control + * OPT_PAUSE not set + * ASYM_PAUSE not set + */ + cfg.options &= ~DPNI_LINK_OPT_PAUSE; + cfg.options &= ~DPNI_LINK_OPT_ASYM_PAUSE; + break; + default: + RTE_LOG(ERR, PMD, "Incorrect Flow control flag (%d)", + fc_conf->mode); + return -1; + } + + ret = dpni_set_link_cfg(dpni, CMD_PRI_LOW, priv->token, &cfg); + if (ret) + RTE_LOG(ERR, PMD, "Unable to set Link configuration (err=%d)", + ret); + + /* Enable link */ + dpaa2_dev_set_link_up(dev); + + return ret; +} + static struct eth_dev_ops dpaa2_ethdev_ops = { .dev_configure = dpaa2_eth_dev_configure, .dev_start = dpaa2_dev_start, @@ -1128,6 +1268,8 @@ static struct eth_dev_ops dpaa2_ethdev_ops = { .rx_queue_release = dpaa2_dev_rx_queue_release, .tx_queue_setup = dpaa2_dev_tx_queue_setup, .tx_queue_release = dpaa2_dev_tx_queue_release, + .flow_ctrl_get = dpaa2_flow_ctrl_get, + .flow_ctrl_set = dpaa2_flow_ctrl_set, .mac_addr_add = dpaa2_dev_add_mac_addr, .mac_addr_remove = dpaa2_dev_remove_mac_addr, .mac_addr_set = dpaa2_dev_set_mac_addr, diff --git a/drivers/net/dpaa2/mc/dpni.c b/drivers/net/dpaa2/mc/dpni.c index 0ad6d11b9f..dbe3f7c0b8 100644 --- a/drivers/net/dpaa2/mc/dpni.c +++ b/drivers/net/dpaa2/mc/dpni.c @@ -444,6 +444,24 @@ int dpni_get_qdid(struct fsl_mc_io *mc_io, return 0; } + +int dpni_set_link_cfg(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + const struct dpni_link_cfg *cfg) +{ + struct mc_command cmd = { 0 }; + + /* prepare command */ + cmd.header = mc_encode_cmd_header(DPNI_CMDID_SET_LINK_CFG, + cmd_flags, + token); + DPNI_CMD_SET_LINK_CFG(cmd, cfg); + + /* send command to mc*/ + return mc_send_command(mc_io, &cmd); +} + int dpni_get_link_state(struct fsl_mc_io *mc_io, uint32_t cmd_flags, uint16_t token, diff --git a/drivers/net/dpaa2/mc/fsl_dpni.h b/drivers/net/dpaa2/mc/fsl_dpni.h index 2f6952623e..bf31872e63 100644 --- a/drivers/net/dpaa2/mc/fsl_dpni.h +++ b/drivers/net/dpaa2/mc/fsl_dpni.h @@ -739,6 +739,30 @@ union dpni_statistics { */ #define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL +/** + * struct - Structure representing DPNI link configuration + * @rate: Rate + * @options: Mask of available options; use 'DPNI_LINK_OPT_' values + */ +struct dpni_link_cfg { + uint32_t rate; + uint64_t options; +}; + +/** + * dpni_set_link_cfg() - set the link configuration. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPNI object + * @cfg: Link configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpni_set_link_cfg(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + const struct dpni_link_cfg *cfg); + /** * struct dpni_link_state - Structure representing DPNI link state * @rate: Rate diff --git a/drivers/net/dpaa2/mc/fsl_dpni_cmd.h b/drivers/net/dpaa2/mc/fsl_dpni_cmd.h index 6e962710ed..4395aacc8f 100644 --- a/drivers/net/dpaa2/mc/fsl_dpni_cmd.h +++ b/drivers/net/dpaa2/mc/fsl_dpni_cmd.h @@ -64,6 +64,7 @@ #define DPNI_CMDID_GET_LINK_STATE ((0x215 << 4) | (0x1)) #define DPNI_CMDID_SET_MAX_FRAME_LENGTH ((0x216 << 4) | (0x1)) #define DPNI_CMDID_GET_MAX_FRAME_LENGTH ((0x217 << 4) | (0x1)) +#define DPNI_CMDID_SET_LINK_CFG ((0x21a << 4) | (0x1)) #define DPNI_CMDID_SET_MCAST_PROMISC ((0x220 << 4) | (0x1)) #define DPNI_CMDID_GET_MCAST_PROMISC ((0x221 << 4) | (0x1)) @@ -237,6 +238,13 @@ do { \ MC_RSP_OP(cmd, 6, 0, 64, uint64_t, (stat)->raw.counter[6]); \ } while (0) +/* cmd, param, offset, width, type, arg_name */ +#define DPNI_CMD_SET_LINK_CFG(cmd, cfg) \ +do { \ + MC_CMD_OP(cmd, 1, 0, 32, uint32_t, cfg->rate);\ + MC_CMD_OP(cmd, 2, 0, 64, uint64_t, cfg->options);\ +} while (0) + /* cmd, param, offset, width, type, arg_name */ #define DPNI_RSP_GET_LINK_STATE(cmd, state) \ do { \