From: Wenzhuo Lu <wenzhuo.lu@intel.com>
Date: Fri, 16 Oct 2015 02:50:51 +0000 (+0800)
Subject: e1000/base: fix redundant PHY power down for i210
X-Git-Tag: spdx-start~8337
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=9896a25392ed9c9b8e1154ba66c8965195cf6422;p=dpdk.git

e1000/base: fix redundant PHY power down for i210

The wrong bit is being used in PHYREG16 for PHY power down. In addition,
the use of PHYREG 16 is unnecessary if bit 11 of PHYREG 0 is used.

Signed-off-by: Wenzhuo Lu <wenzhuo.lu@intel.com>
---

diff --git a/drivers/net/e1000/base/e1000_phy.c b/drivers/net/e1000/base/e1000_phy.c
index 7620ecf143..6bbb379a37 100644
--- a/drivers/net/e1000/base/e1000_phy.c
+++ b/drivers/net/e1000/base/e1000_phy.c
@@ -3498,16 +3498,10 @@ STATIC s32 e1000_access_phy_wakeup_reg_bm(struct e1000_hw *hw, u32 offset,
 void e1000_power_up_phy_copper(struct e1000_hw *hw)
 {
 	u16 mii_reg = 0;
-	u16 power_reg = 0;
 
 	/* The PHY will retain its settings across a power down/up cycle */
 	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
 	mii_reg &= ~MII_CR_POWER_DOWN;
-	if (hw->phy.type == e1000_phy_i210) {
-		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
-		power_reg &= ~GS40G_CS_POWER_DOWN;
-		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
-	}
 	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
 }
 
@@ -3522,17 +3516,10 @@ void e1000_power_up_phy_copper(struct e1000_hw *hw)
 void e1000_power_down_phy_copper(struct e1000_hw *hw)
 {
 	u16 mii_reg = 0;
-	u16 power_reg = 0;
 
 	/* The PHY will retain its settings across a power down/up cycle */
 	hw->phy.ops.read_reg(hw, PHY_CONTROL, &mii_reg);
 	mii_reg |= MII_CR_POWER_DOWN;
-	/* i210 Phy requires an additional bit for power up/down */
-	if (hw->phy.type == e1000_phy_i210) {
-		hw->phy.ops.read_reg(hw, GS40G_COPPER_SPEC, &power_reg);
-		power_reg |= GS40G_CS_POWER_DOWN;
-		hw->phy.ops.write_reg(hw, GS40G_COPPER_SPEC, power_reg);
-	}
 	hw->phy.ops.write_reg(hw, PHY_CONTROL, mii_reg);
 	msec_delay(1);
 }
@@ -3563,7 +3550,6 @@ STATIC s32 __e1000_read_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 *data,
 		if (ret_val)
 			return ret_val;
 	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, data,
@@ -3673,7 +3659,6 @@ STATIC s32 __e1000_write_phy_reg_hv(struct e1000_hw *hw, u32 offset, u16 data,
 		if (ret_val)
 			return ret_val;
 	}
-
 	/* Page 800 works differently than the rest so it has its own func */
 	if (page == BM_WUC_PAGE) {
 		ret_val = e1000_access_phy_wakeup_reg_bm(hw, offset, &data,
diff --git a/drivers/net/e1000/base/e1000_phy.h b/drivers/net/e1000/base/e1000_phy.h
index b30b36e3df..2b78af07ea 100644
--- a/drivers/net/e1000/base/e1000_phy.h
+++ b/drivers/net/e1000/base/e1000_phy.h
@@ -143,7 +143,6 @@ bool e1000_is_mphy_ready(struct e1000_hw *hw);
 #define GS40G_MAC_LB			0x4140
 #define GS40G_MAC_SPEED_1G		0X0006
 #define GS40G_COPPER_SPEC		0x0010
-#define GS40G_CS_POWER_DOWN		0x0002
 
 /* BM/HV Specific Registers */
 #define BM_PORT_CTRL_PAGE		769