From: Alejandro Lucero Date: Tue, 20 Dec 2016 10:18:19 +0000 (+0000) Subject: net/nfp: add TSO support X-Git-Tag: spdx-start~4909 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=9ba3d0ae20902cbb7713dd27e5bc181949f53d21;p=dpdk.git net/nfp: add TSO support This patch implements NFP PMD support for TSO but it also requires a firmware advertising the capability. Signed-off-by: Alejandro Lucero --- diff --git a/doc/guides/nics/features/nfp.ini b/doc/guides/nics/features/nfp.ini index 3004a67490..a1281d2a1a 100644 --- a/doc/guides/nics/features/nfp.ini +++ b/doc/guides/nics/features/nfp.ini @@ -12,6 +12,7 @@ Queue start/stop = Y MTU update = Y Jumbo frame = Y Promiscuous mode = Y +TSO = Y RSS hash = Y RSS key update = Y RSS reta update = Y diff --git a/drivers/net/nfp/nfp_net.c b/drivers/net/nfp/nfp_net.c index 43e9c2a6fb..31e72e2901 100644 --- a/drivers/net/nfp/nfp_net.c +++ b/drivers/net/nfp/nfp_net.c @@ -1152,6 +1152,9 @@ nfp_net_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *dev_info) dev_info->speed_capa = ETH_SPEED_NUM_1G | ETH_LINK_SPEED_10G | ETH_SPEED_NUM_25G | ETH_SPEED_NUM_40G | ETH_SPEED_NUM_50G | ETH_LINK_SPEED_100G; + + if (hw->cap & NFP_NET_CFG_CTRL_LSO) + dev_info->tx_offload_capa |= DEV_TX_OFFLOAD_TCP_TSO; } static const uint32_t * @@ -1653,6 +1656,27 @@ nfp_net_tx_queue_setup(struct rte_eth_dev *dev, uint16_t queue_idx, return 0; } +/* nfp_net_tx_tso - Set TX descriptor for TSO */ +static inline void +nfp_net_tx_tso(struct nfp_net_txq *txq, struct nfp_net_tx_desc *txd, + struct rte_mbuf *mb) +{ + uint64_t ol_flags; + struct nfp_net_hw *hw = txq->hw; + + if (!(hw->cap & NFP_NET_CFG_CTRL_LSO)) + return; + + ol_flags = mb->ol_flags; + + if (!(ol_flags & PKT_TX_TCP_SEG)) + return; + + txd->l4_offset = mb->l2_len + mb->l3_len + mb->l4_len; + txd->lso = rte_cpu_to_le_16(mb->tso_segsz); + txd->flags |= PCIE_DESC_TX_LSO; +} + /* nfp_net_tx_cksum - Set TX CSUM offload flags in TX descriptor */ static inline void nfp_net_tx_cksum(struct nfp_net_txq *txq, struct nfp_net_tx_desc *txd, @@ -2021,7 +2045,7 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) { struct nfp_net_txq *txq; struct nfp_net_hw *hw; - struct nfp_net_tx_desc *txds; + struct nfp_net_tx_desc *txds, txd; struct rte_mbuf *pkt; uint64_t dma_addr; int pkt_size, dma_size; @@ -2070,19 +2094,17 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) /* * Checksum and VLAN flags just in the first descriptor for a - * multisegment packet + * multisegment packet, but TSO info needs to be in all of them. */ - nfp_net_tx_cksum(txq, txds, pkt); + nfp_net_tx_tso(txq, &txd, pkt); + nfp_net_tx_cksum(txq, &txd, pkt); if ((pkt->ol_flags & PKT_TX_VLAN_PKT) && (hw->cap & NFP_NET_CFG_CTRL_TXVLAN)) { - txds->flags |= PCIE_DESC_TX_VLAN; - txds->vlan = pkt->vlan_tci; + txd.flags |= PCIE_DESC_TX_VLAN; + txd.vlan = pkt->vlan_tci; } - if (pkt->ol_flags & PKT_TX_TCP_SEG) - rte_panic("TSO is not supported\n"); - /* * mbuf data_len is the data in one segment and pkt_len data * in the whole packet. When the packet is just one segment, @@ -2100,6 +2122,8 @@ nfp_net_xmit_pkts(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts) *lmbuf = pkt; while (pkt_size) { + /* Copying TSO, VLAN and cksum info */ + *txds = txd; dma_size = pkt->data_len; dma_addr = rte_mbuf_data_dma_addr(pkt); PMD_TX_LOG(DEBUG, "Working with mbuf at dma address:"