From: Jijiang Liu Date: Wed, 18 Jun 2014 15:15:39 +0000 (+0200) Subject: ixgbe/base: improve error handling X-Git-Tag: spdx-start~10647 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=9ba80bde4c9765010a328ebcc90ff3afc544d3c7;p=dpdk.git ixgbe/base: improve error handling Signed-off-by: Jijiang Liu Acked-by: Helin Zhang Tested-by: Waterman Cao [Thomas: split code drop] --- diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c index 03a4b8c4e7..adb75dc58d 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c @@ -2193,22 +2193,37 @@ STATIC s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) } /* get the offset to the Firmware Module block */ - hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + if (hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset)) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", IXGBE_FW_PTR); + return IXGBE_ERR_EEPROM_VERSION; + } if ((fw_offset == 0) || (fw_offset == 0xFFFF)) goto fw_version_out; /* get the offset to the Pass Through Patch Configuration block */ - hw->eeprom.ops.read(hw, (fw_offset + + if (hw->eeprom.ops.read(hw, (fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), - &fw_ptp_cfg_offset); + &fw_ptp_cfg_offset)) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", + fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR); + return IXGBE_ERR_EEPROM_VERSION; + } if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) goto fw_version_out; /* get the firmware version */ - hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + - IXGBE_FW_PATCH_VERSION_4), &fw_version); + if (hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), &fw_version)) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", + fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4); + return IXGBE_ERR_EEPROM_VERSION; + } if (fw_version > 0x5) status = IXGBE_SUCCESS; diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c index 91b4e1889b..20c014cc60 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c @@ -93,6 +93,12 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) DEBUGFUNC("ixgbe_set_mac_type\n"); + if (hw->vendor_id != IXGBE_INTEL_VENDOR_ID) { + ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, + "Unsupported vendor id: %x", hw->vendor_id); + return IXGBE_ERR_DEVICE_NOT_SUPPORTED; + } + switch (hw->device_id) { case IXGBE_DEV_ID_82598: case IXGBE_DEV_ID_82598_BX: @@ -138,6 +144,9 @@ s32 ixgbe_set_mac_type(struct ixgbe_hw *hw) break; default: ret_val = IXGBE_ERR_DEVICE_NOT_SUPPORTED; + ERROR_REPORT2(IXGBE_ERROR_UNSUPPORTED, + "Unsupported device id: %x", + hw->device_id); break; } diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c index 9c3fb4a10b..ec0c0656f6 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c @@ -182,7 +182,8 @@ STATIC s32 ixgbe_setup_fc(struct ixgbe_hw *hw) * ixgbe_fc_rx_pause because it will cause us to fail at UNH. */ if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { - DEBUGOUT("ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; goto out; } @@ -268,13 +269,14 @@ STATIC s32 ixgbe_setup_fc(struct ixgbe_hw *hw) reg_cu |= IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE; break; default: - DEBUGOUT("Flow control param set incorrectly\n"); + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); ret_val = IXGBE_ERR_CONFIG; goto out; break; } - if (hw->mac.type != ixgbe_mac_X540) { + if (hw->mac.type < ixgbe_mac_X540) { /* * Enable auto-negotiation between the MAC & PHY; * the MAC will advertise clause 37 flow control. @@ -325,7 +327,7 @@ STATIC s32 ixgbe_setup_fc(struct ixgbe_hw *hw) IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg_cu); } - DEBUGOUT1("Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); + DEBUGOUT1("Set up FC; PCS1GLCTL = 0x%08X\n", reg); out: return ret_val; } @@ -1469,16 +1471,18 @@ s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, if (words == 0) { status = IXGBE_ERR_INVALID_ARGUMENT; + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words"); goto out; } if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset"); goto out; } for (i = 0; i < words; i++) { - eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | IXGBE_EEPROM_RW_REG_START; IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); @@ -1575,11 +1579,13 @@ s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, if (words == 0) { status = IXGBE_ERR_INVALID_ARGUMENT; + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM words"); goto out; } if (offset >= hw->eeprom.word_size) { status = IXGBE_ERR_EEPROM; + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, "Invalid EEPROM offset"); goto out; } @@ -1648,6 +1654,11 @@ s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) } usec_delay(5); } + + if (i == IXGBE_EERD_EEWR_ATTEMPTS) + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "EEPROM read/write done polling timed out"); + return status; } @@ -1783,14 +1794,15 @@ STATIC s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) * was not granted because we don't have access to the EEPROM */ if (i >= timeout) { - DEBUGOUT("SWESMBI Software EEPROM semaphore " - "not granted.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "SWESMBI Software EEPROM semaphore not granted.\n"); ixgbe_release_eeprom_semaphore(hw); status = IXGBE_ERR_EEPROM; } } else { - DEBUGOUT("Software semaphore SMBI between device drivers " - "not granted.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Software semaphore SMBI between device drivers " + "not granted.\n"); } return status; @@ -2214,7 +2226,8 @@ s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, /* Make sure we are using a valid rar index range */ if (index >= rar_entries) { - DEBUGOUT1("RAR index %d is out of range.\n", index); + ERROR_REPORT2(IXGBE_ERROR_ARGUMENT, + "RAR index %d is out of range.\n", index); return IXGBE_ERR_INVALID_ARGUMENT; } @@ -2263,7 +2276,8 @@ s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) /* Make sure we are using a valid rar index range */ if (index >= rar_entries) { - DEBUGOUT1("RAR index %d is out of range.\n", index); + ERROR_REPORT2(IXGBE_ERROR_ARGUMENT, + "RAR index %d is out of range.\n", index); return IXGBE_ERR_INVALID_ARGUMENT; } @@ -2706,7 +2720,8 @@ s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw) fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; break; default: - DEBUGOUT("Flow control param set incorrectly\n"); + ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, + "Flow control param set incorrectly\n"); ret_val = IXGBE_ERR_CONFIG; goto out; break; @@ -2767,8 +2782,13 @@ out: STATIC s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) { - if ((!(adv_reg)) || (!(lp_reg))) + if ((!(adv_reg)) || (!(lp_reg))) { + ERROR_REPORT3(IXGBE_ERROR_UNSUPPORTED, + "Local or link partner's advertised flow control " + "settings are NULL. Local: %x, link partner: %x\n", + adv_reg, lp_reg); return IXGBE_ERR_FC_NOT_NEGOTIATED; + } if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { /* @@ -2819,8 +2839,11 @@ STATIC s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || - (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) + (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Auto-Negotiation did not complete or timed out"); goto out; + } pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); @@ -2852,13 +2875,19 @@ STATIC s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) * - we are 82599 and link partner is not AN enabled */ links = IXGBE_READ_REG(hw, IXGBE_LINKS); - if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) + if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) { + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Auto-Negotiation did not complete"); goto out; + } if (hw->mac.type == ixgbe_mac_82599EB) { links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); - if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) + if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Link partner is not AN enabled"); goto out; + } } /* * Read the 10g AN autoc and LP ability registers and resolve @@ -2920,12 +2949,17 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) * - FC autoneg is disabled, or if * - link is not up. */ - if (hw->fc.disable_fc_autoneg) + if (hw->fc.disable_fc_autoneg) { + ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, + "Flow control autoneg is disabled"); goto out; + } hw->mac.ops.check_link(hw, &speed, &link_up, false); - if (!link_up) + if (!link_up) { + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); goto out; + } switch (hw->phy.media_type) { /* Autoneg flow control on fiber adapters */ @@ -3010,7 +3044,8 @@ s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) goto out; } - DEBUGOUT("PCIe transaction pending bit also did not clear.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "PCIe transaction pending bit also did not clear.\n"); status = IXGBE_ERR_MASTER_REQUESTS_PENDING; out: @@ -3281,15 +3316,23 @@ out: STATIC s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, u16 *san_mac_offset) { + s32 ret_val; + DEBUGFUNC("ixgbe_get_san_mac_addr_offset"); /* * First read the EEPROM pointer to see if the MAC addresses are * available. */ - hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + ret_val = hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, + san_mac_offset); + if (ret_val) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom at offset %d failed", + IXGBE_SAN_MAC_ADDR_PTR); + } - return IXGBE_SUCCESS; + return ret_val; } /** @@ -3306,6 +3349,7 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { u16 san_mac_data, san_mac_offset; u8 i; + s32 ret_val; DEBUGFUNC("ixgbe_get_san_mac_addr_generic"); @@ -3313,18 +3357,9 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) * First read the EEPROM pointer to see if the MAC addresses are * available. If they're not, no point in calling set_lan_id() here. */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - /* - * No addresses available in this EEPROM. It's not an - * error though, so just wipe the local address and return. - */ - for (i = 0; i < 6; i++) - san_mac_addr[i] = 0xFF; - + ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF) goto san_mac_addr_out; - } /* make sure we know which port we need to program */ hw->mac.ops.set_lan_id(hw); @@ -3332,13 +3367,27 @@ s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); for (i = 0; i < 3; i++) { - hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + ret_val = hw->eeprom.ops.read(hw, san_mac_offset, + &san_mac_data); + if (ret_val) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", + san_mac_offset); + goto san_mac_addr_out; + } san_mac_addr[i * 2] = (u8)(san_mac_data); san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); san_mac_offset++; } + return IXGBE_SUCCESS; san_mac_addr_out: + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; return IXGBE_SUCCESS; } @@ -3351,19 +3400,16 @@ san_mac_addr_out: **/ s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) { - s32 status = IXGBE_SUCCESS; + s32 ret_val; u16 san_mac_data, san_mac_offset; u8 i; DEBUGFUNC("ixgbe_set_san_mac_addr_generic"); /* Look for SAN mac address pointer. If not defined, return */ - ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); - - if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { - status = IXGBE_ERR_NO_SAN_ADDR_PTR; - goto san_mac_addr_out; - } + ret_val = ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + if (ret_val || san_mac_offset == 0 || san_mac_offset == 0xFFFF) + return IXGBE_ERR_NO_SAN_ADDR_PTR; /* Make sure we know which port we need to write */ hw->mac.ops.set_lan_id(hw); @@ -3378,8 +3424,7 @@ s32 ixgbe_set_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) san_mac_offset++; } -san_mac_addr_out: - return status; + return IXGBE_SUCCESS; } /** @@ -3506,7 +3551,8 @@ s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) /* Make sure we are using a valid rar index range */ if (rar >= rar_entries) { - DEBUGOUT1("RAR index %d is out of range.\n", rar); + ERROR_REPORT2(IXGBE_ERROR_ARGUMENT, + "RAR index %d is out of range.\n", rar); return IXGBE_ERR_INVALID_ARGUMENT; } @@ -3555,7 +3601,8 @@ s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) /* Make sure we are using a valid rar index range */ if (rar >= rar_entries) { - DEBUGOUT1("RAR index %d is out of range.\n", rar); + ERROR_REPORT2(IXGBE_ERROR_ARGUMENT, + "RAR index %d is out of range.\n", rar); return IXGBE_ERR_INVALID_ARGUMENT; } @@ -3654,7 +3701,8 @@ s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) if (first_empty_slot) regindex = first_empty_slot; else { - DEBUGOUT("No space in VLVF.\n"); + ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, + "No space in VLVF.\n"); regindex = IXGBE_ERR_NO_SPACE; } } @@ -3944,8 +3992,9 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, *wwpn_prefix = 0xFFFF; /* check if alternative SAN MAC is supported */ - hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, - &alt_san_mac_blk_offset); + offset = IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR; + if (hw->eeprom.ops.read(hw, offset, &alt_san_mac_blk_offset)) + goto wwn_prefix_err; if ((alt_san_mac_blk_offset == 0) || (alt_san_mac_blk_offset == 0xFFFF)) @@ -3953,19 +4002,29 @@ s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, /* check capability in alternative san mac address block */ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; - hw->eeprom.ops.read(hw, offset, &caps); + if (hw->eeprom.ops.read(hw, offset, &caps)) + goto wwn_prefix_err; if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) goto wwn_prefix_out; /* get the corresponding prefix for WWNN/WWPN */ offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwnn_prefix); + if (hw->eeprom.ops.read(hw, offset, wwnn_prefix)) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", offset); + } offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; - hw->eeprom.ops.read(hw, offset, wwpn_prefix); + if (hw->eeprom.ops.read(hw, offset, wwpn_prefix)) + goto wwn_prefix_err; wwn_prefix_out: return IXGBE_SUCCESS; + +wwn_prefix_err: + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", offset); + return IXGBE_SUCCESS; } /** diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_mbx.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_mbx.c index 52da1e204c..e48699c3b7 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_mbx.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_mbx.c @@ -76,10 +76,11 @@ s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) DEBUGFUNC("ixgbe_write_mbx"); - if (size > mbx->size) + if (size > mbx->size) { ret_val = IXGBE_ERR_MBX; - - else if (mbx->ops.write) + ERROR_REPORT2(IXGBE_ERROR_ARGUMENT, + "Invalid mailbox message size %d", size); + } else if (mbx->ops.write) ret_val = mbx->ops.write(hw, msg, size, mbx_id); return ret_val; @@ -169,6 +170,10 @@ STATIC s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id) usec_delay(mbx->usec_delay); } + if (countdown == 0) + ERROR_REPORT2(IXGBE_ERROR_POLLING, + "Polling for VF%d mailbox message timedout", mbx_id); + out: return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX; } @@ -197,6 +202,10 @@ STATIC s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id) usec_delay(mbx->usec_delay); } + if (countdown == 0) + ERROR_REPORT2(IXGBE_ERROR_POLLING, + "Polling for VF%d mailbox ack timedout", mbx_id); + out: return countdown ? IXGBE_SUCCESS : IXGBE_ERR_MBX; } @@ -643,6 +652,10 @@ STATIC s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number) p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number)); if (p2v_mailbox & IXGBE_PFMAILBOX_PFU) ret_val = IXGBE_SUCCESS; + else + ERROR_REPORT2(IXGBE_ERROR_POLLING, + "Failed to obtain mailbox lock for VF%d", vf_number); + return ret_val; } diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h index 312e8d6525..4a3018d3bb 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h @@ -62,6 +62,10 @@ #define DEBUGOUT6(S, args...) DEBUGOUT(S, ##args) #define DEBUGOUT7(S, args...) DEBUGOUT(S, ##args) +#define ERROR_REPORT1(e, S, args...) DEBUGOUT(S, ##args) +#define ERROR_REPORT2 DEBUGOUT2 +#define ERROR_REPORT3 DEBUGOUT3 + #define FALSE 0 #define TRUE 1 diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c index e2ccccc2be..4d032d2fde 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c @@ -267,7 +267,8 @@ s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) if (ctrl & IXGBE_MDIO_PHY_XS_RESET) { status = IXGBE_ERR_RESET_FAILED; - DEBUGOUT("PHY reset polling failed to complete.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "PHY reset polling failed to complete.\n"); } out: @@ -558,7 +559,8 @@ s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) if (time_out == max_time_out) { status = IXGBE_ERR_LINK_SETUP; - DEBUGOUT("ixgbe_setup_phy_link_generic: time out"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "PHY autonegotiation time out"); } return status; @@ -867,6 +869,8 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) * Read control word from PHY init contents offset */ ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + if (ret_val) + goto err_eeprom; control = (eword & IXGBE_CONTROL_MASK_NL) >> IXGBE_CONTROL_SHIFT_NL; edata = eword & IXGBE_DATA_MASK_NL; @@ -879,10 +883,16 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) case IXGBE_DATA_NL: DEBUGOUT("DATA:\n"); data_offset++; - hw->eeprom.ops.read(hw, data_offset++, - &phy_offset); + ret_val = hw->eeprom.ops.read(hw, data_offset, + &phy_offset); + if (ret_val) + goto err_eeprom; + data_offset++; for (i = 0; i < edata; i++) { - hw->eeprom.ops.read(hw, data_offset, &eword); + ret_val = hw->eeprom.ops.read(hw, data_offset, + &eword); + if (ret_val) + goto err_eeprom; hw->phy.ops.write_reg(hw, phy_offset, IXGBE_TWINAX_DEV, eword); DEBUGOUT2("Wrote %4.4x to %4.4x\n", eword, @@ -914,6 +924,11 @@ s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) out: return ret_val; + +err_eeprom: + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", data_offset); + return IXGBE_ERR_PHY; } /** @@ -974,9 +989,7 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) IXGBE_SFF_IDENTIFIER, &identifier); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; /* LAN ID is needed for sfp_type determination */ @@ -990,26 +1003,20 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_CABLE_TECHNOLOGY, &cable_tech); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; /* ID Module @@ -1107,27 +1114,21 @@ s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) IXGBE_SFF_VENDOR_OUI_BYTE0, &oui_bytes[0]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE1, &oui_bytes[1]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; status = hw->phy.ops.read_i2c_eeprom(hw, IXGBE_SFF_VENDOR_OUI_BYTE2, &oui_bytes[2]); - if (status == IXGBE_ERR_SWFW_SYNC || - status == IXGBE_ERR_I2C || - status == IXGBE_ERR_SFP_NOT_PRESENT) + if (status != IXGBE_SUCCESS) goto err_read_i2c_eeprom; vendor_oui = @@ -1280,7 +1281,12 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, sfp_type = ixgbe_sfp_type_srlr_core1; /* Read offset to PHY init contents */ - hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + if (hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset)) { + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", + IXGBE_PHY_INIT_OFFSET_NL); + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + } if ((!*list_offset) || (*list_offset == 0xFFFF)) return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; @@ -1292,12 +1298,14 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, * Find the matching SFP ID in the EEPROM * and program the init sequence */ - hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + goto err_phy; while (sfp_id != IXGBE_PHY_INIT_END_NL) { if (sfp_id == sfp_type) { (*list_offset)++; - hw->eeprom.ops.read(hw, *list_offset, data_offset); + if (hw->eeprom.ops.read(hw, *list_offset, data_offset)) + goto err_phy; if ((!*data_offset) || (*data_offset == 0xFFFF)) { DEBUGOUT("SFP+ module not supported\n"); return IXGBE_ERR_SFP_NOT_SUPPORTED; @@ -1307,7 +1315,7 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } else { (*list_offset) += 2; if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) - return IXGBE_ERR_PHY; + goto err_phy; } } @@ -1317,6 +1325,11 @@ s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, } return IXGBE_SUCCESS; + +err_phy: + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "eeprom read at offset %d failed", *list_offset); + return IXGBE_ERR_PHY; } /** @@ -1666,7 +1679,8 @@ STATIC s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) } if (ack == 1) { - DEBUGOUT("I2C ack was not received.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "I2C ack was not received.\n"); status = IXGBE_ERR_I2C; } @@ -1736,7 +1750,8 @@ STATIC s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) usec_delay(IXGBE_I2C_T_LOW); } else { status = IXGBE_ERR_I2C; - DEBUGOUT1("I2C data was not set to %X\n", data); + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "I2C data was not set to %X\n", data); } return status; @@ -1820,7 +1835,9 @@ STATIC s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); if (data != ixgbe_get_i2c_data(i2cctl)) { status = IXGBE_ERR_I2C; - DEBUGOUT1("Error - I2C data was not set to %X.\n", data); + ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, + "Error - I2C data was not set to %X.\n", + data); } return status; @@ -1907,6 +1924,7 @@ s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) goto out; status = IXGBE_ERR_OVERTEMP; + ERROR_REPORT1(IXGBE_ERROR_CAUTION, "Device over temperature"); out: return status; } diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h index dff5da8aa9..040983ab4a 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h @@ -34,10 +34,51 @@ POSSIBILITY OF SUCH DAMAGE. #ifndef _IXGBE_TYPE_H_ #define _IXGBE_TYPE_H_ +/* + * The following is a brief description of the error categories used by the + * ERROR_REPORT* macros. + * + * - IXGBE_ERROR_INVALID_STATE + * This category is for errors which represent a serious failure state that is + * unexpected, and could be potentially harmful to device operation. It should + * not be used for errors relating to issues that can be worked around or + * ignored. + * + * - IXGBE_ERROR_POLLING + * This category is for errors related to polling/timeout issues and should be + * used in any case where the timeout occured, or a failure to obtain a lock, or + * failure to receive data within the time limit. + * + * - IXGBE_ERROR_CAUTION + * This category should be used for reporting issues that may be the cause of + * other errors, such as temperature warnings. It should indicate an event which + * could be serious, but hasn't necessarily caused problems yet. + * + * - IXGBE_ERROR_SOFTWARE + * This category is intended for errors due to software state preventing + * something. The category is not intended for errors due to bad arguments, or + * due to unsupported features. It should be used when a state occurs which + * prevents action but is not a serious issue. + * + * - IXGBE_ERROR_ARGUMENT + * This category is for when a bad or invalid argument is passed. It should be + * used whenever a function is called and error checking has detected the + * argument is wrong or incorrect. + * + * - IXGBE_ERROR_UNSUPPORTED + * This category is for errors which are due to unsupported circumstances or + * configuration issues. It should not be used when the issue is due to an + * invalid argument, but for when something has occurred that is unsupported + * (Ex: Flow control autonegotiation or an unsupported SFP+ module.) + */ + #include "ixgbe_osdep.h" #ident "$Id: ixgbe_type.h,v 1.552 2012/11/08 11:33:27 jtkirshe Exp $" +/* Vendor ID */ +#define IXGBE_INTEL_VENDOR_ID 0x8086 + /* Device IDs */ #define IXGBE_DEV_ID_82598 0x10B6 #define IXGBE_DEV_ID_82598_BX 0x1508 diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c index f68f414e23..1a0043bdb0 100644 --- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c +++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_x540.c @@ -227,7 +227,8 @@ mac_reset_top: if (ctrl & IXGBE_CTRL_RST_MASK) { status = IXGBE_ERR_RESET_FAILED; - DEBUGOUT("Reset polling failed to complete.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Reset polling failed to complete.\n"); } msec_delay(100); @@ -579,8 +580,11 @@ s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, * Verify read checksum from EEPROM is the same as * calculated checksum */ - if (read_checksum != checksum) + if (read_checksum != checksum) { status = IXGBE_ERR_EEPROM_CHECKSUM; + ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, + "Invalid EEPROM checksum"); + } /* If the user cares, return the calculated checksum */ if (checksum_val) @@ -711,6 +715,11 @@ STATIC s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) } usec_delay(5); } + + if (i == IXGBE_FLUDONE_ATTEMPTS) + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Flash update status polling timed out"); + return status; } @@ -772,6 +781,8 @@ s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) /* Failed to get SW only semaphore */ if (swmask == IXGBE_GSSR_SW_MNG_SM) { ret_val = IXGBE_ERR_SWFW_SYNC; + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Failed to get SW only semaphore"); goto out; } @@ -866,14 +877,15 @@ STATIC s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) * was not granted because we don't have access to the EEPROM */ if (i >= timeout) { - DEBUGOUT("REGSMP Software NVM semaphore not " - "granted.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "REGSMP Software NVM semaphore not granted.\n"); ixgbe_release_swfw_sync_semaphore(hw); status = IXGBE_ERR_EEPROM; } } else { - DEBUGOUT("Software semaphore SMBI between device drivers " - "not granted.\n"); + ERROR_REPORT1(IXGBE_ERROR_POLLING, + "Software semaphore SMBI between device drivers " + "not granted.\n"); } return status;