From: Viacheslav Ovsiienko Date: Mon, 26 Oct 2020 11:55:01 +0000 (+0000) Subject: net/mlx5: configure Rx queue for buffer split X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=a0a45e8af723;p=dpdk.git net/mlx5: configure Rx queue for buffer split The scatter-gather elements should be configured accordingly to support the buffer split feature. The application provides the desired settings for the segments at the beginning of the packets and PMD pads the buffer chain (if needed) with attributes of last specified segment to accommodate the packet of maximal length. There are some limitations are implied. The MPRQ feature should be disengaged if split is requested, due to MPRQ neither supports pushing data to the dedicated pools nor follows the flexible buffer sizes. The vectorized rx_burst routines does not support the scattering (these ones are extremely simplified and work over the single segment only) and can't handle split as well. Signed-off-by: Viacheslav Ovsiienko Acked-by: Matan Azrad --- diff --git a/drivers/net/mlx5/mlx5.h b/drivers/net/mlx5/mlx5.h index 0149338c8f..721edab929 100644 --- a/drivers/net/mlx5/mlx5.h +++ b/drivers/net/mlx5/mlx5.h @@ -729,6 +729,7 @@ struct mlx5_ind_table_obj { }; /* Hash Rx queue. */ +__extension__ struct mlx5_hrxq { ILIST_ENTRY(uint32_t)next; /* Index to the next element. */ rte_atomic32_t refcnt; /* Reference counter. */ diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c index 747abc96fa..f35ffe22f4 100644 --- a/drivers/net/mlx5/mlx5_rxq.c +++ b/drivers/net/mlx5/mlx5_rxq.c @@ -1402,9 +1402,82 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, * the vector Rx will not be used. */ uint16_t desc_n = desc + config->rx_vec_en * MLX5_VPMD_DESCS_PER_LOOP; + const struct rte_eth_rxseg_split *qs_seg = rx_seg; + unsigned int tail_len; - if (non_scatter_min_mbuf_size > mb_len && !(offloads & - DEV_RX_OFFLOAD_SCATTER)) { + tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, sizeof(*tmpl) + + desc_n * sizeof(struct rte_mbuf *), 0, socket); + if (!tmpl) { + rte_errno = ENOMEM; + return NULL; + } + MLX5_ASSERT(n_seg && n_seg <= MLX5_MAX_RXQ_NSEG); + /* + * Build the array of actual buffer offsets and lengths. + * Pad with the buffers from the last memory pool if + * needed to handle max size packets, replace zero length + * with the buffer length from the pool. + */ + tail_len = max_rx_pkt_len; + do { + struct mlx5_eth_rxseg *hw_seg = + &tmpl->rxq.rxseg[tmpl->rxq.rxseg_n]; + uint32_t buf_len, offset, seg_len; + + /* + * For the buffers beyond descriptions offset is zero, + * the first buffer contains head room. + */ + buf_len = rte_pktmbuf_data_room_size(qs_seg->mp); + offset = (tmpl->rxq.rxseg_n >= n_seg ? 0 : qs_seg->offset) + + (tmpl->rxq.rxseg_n ? 0 : RTE_PKTMBUF_HEADROOM); + /* + * For the buffers beyond descriptions the length is + * pool buffer length, zero lengths are replaced with + * pool buffer length either. + */ + seg_len = tmpl->rxq.rxseg_n >= n_seg ? buf_len : + qs_seg->length ? + qs_seg->length : + (buf_len - offset); + /* Check is done in long int, now overflows. */ + if (buf_len < seg_len + offset) { + DRV_LOG(ERR, "port %u Rx queue %u: Split offset/length " + "%u/%u can't be satisfied", + dev->data->port_id, idx, + qs_seg->length, qs_seg->offset); + rte_errno = EINVAL; + goto error; + } + if (seg_len > tail_len) + seg_len = buf_len - offset; + if (++tmpl->rxq.rxseg_n > MLX5_MAX_RXQ_NSEG) { + DRV_LOG(ERR, + "port %u too many SGEs (%u) needed to handle" + " requested maximum packet size %u, the maximum" + " supported are %u", dev->data->port_id, + tmpl->rxq.rxseg_n, max_rx_pkt_len, + MLX5_MAX_RXQ_NSEG); + rte_errno = ENOTSUP; + goto error; + } + /* Build the actual scattering element in the queue object. */ + hw_seg->mp = qs_seg->mp; + MLX5_ASSERT(offset <= UINT16_MAX); + MLX5_ASSERT(seg_len <= UINT16_MAX); + hw_seg->offset = (uint16_t)offset; + hw_seg->length = (uint16_t)seg_len; + /* + * Advance the segment descriptor, the padding is the based + * on the attributes of the last descriptor. + */ + if (tmpl->rxq.rxseg_n < n_seg) + qs_seg++; + tail_len -= RTE_MIN(tail_len, seg_len); + } while (tail_len || !rte_is_power_of_2(tmpl->rxq.rxseg_n)); + MLX5_ASSERT(tmpl->rxq.rxseg_n && + tmpl->rxq.rxseg_n <= MLX5_MAX_RXQ_NSEG); + if (tmpl->rxq.rxseg_n > 1 && !(offloads & DEV_RX_OFFLOAD_SCATTER)) { DRV_LOG(ERR, "port %u Rx queue %u: Scatter offload is not" " configured and no enough mbuf space(%u) to contain " "the maximum RX packet length(%u) with head-room(%u)", @@ -1413,15 +1486,6 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, rte_errno = ENOSPC; return NULL; } - tmpl = mlx5_malloc(MLX5_MEM_RTE | MLX5_MEM_ZERO, - sizeof(*tmpl) + desc_n * sizeof(struct rte_mbuf *) + - (desc >> mprq_stride_nums) * sizeof(struct mlx5_mprq_buf *), - 0, socket); - - if (!tmpl) { - rte_errno = ENOMEM; - return NULL; - } tmpl->type = MLX5_RXQ_TYPE_STANDARD; if (mlx5_mr_btree_init(&tmpl->rxq.mr_ctrl.cache_bh, MLX5_MR_BTREE_CACHE_N, socket)) { @@ -1438,7 +1502,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, * - The number of descs is more than the number of strides. * - max_rx_pkt_len plus overhead is less than the max size * of a stride or mprq_stride_size is specified by a user. - * Need to nake sure that there are enough stides to encap + * Need to make sure that there are enough strides to encap * the maximum packet size in case mprq_stride_size is set. * Otherwise, enable Rx scatter if necessary. */ @@ -1468,11 +1532,11 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, " strd_num_n = %u, strd_sz_n = %u", dev->data->port_id, idx, tmpl->rxq.strd_num_n, tmpl->rxq.strd_sz_n); - } else if (max_rx_pkt_len <= first_mb_free_size) { + } else if (tmpl->rxq.rxseg_n == 1) { + MLX5_ASSERT(max_rx_pkt_len <= first_mb_free_size); tmpl->rxq.sges_n = 0; max_lro_size = max_rx_pkt_len; } else if (offloads & DEV_RX_OFFLOAD_SCATTER) { - unsigned int size = non_scatter_min_mbuf_size; unsigned int sges_n; if (lro_on_queue && first_mb_free_size < @@ -1487,7 +1551,7 @@ mlx5_rxq_new(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc, * Determine the number of SGEs needed for a full packet * and round it to the next power of two. */ - sges_n = log2above((size / mb_len) + !!(size % mb_len)); + sges_n = log2above(tmpl->rxq.rxseg_n); if (sges_n > MLX5_MAX_LOG_RQ_SEGS) { DRV_LOG(ERR, "port %u too many SGEs (%u) needed to handle"