From: Chengwen Feng Date: Tue, 23 Mar 2021 11:21:00 +0000 (+0800) Subject: net/hns3: add runtime config to select IO burst function X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=a124f9e9591bf2b22b20e2d117775b0ff0b9f684;p=dpdk.git net/hns3: add runtime config to select IO burst function Currently, the driver support multiple IO burst function and auto selection of the most appropriate function based on offload configuration. Most applications such as l2fwd/l3fwd don't provide the means to change offload configuration, so it will use the auto selection's io burst function. This patch support runtime config to select io burst function, which add two config: rx_func_hint and tx_func_hint, both could assign vec/sve/simple/common. The driver will use the following rules to select io burst func: a. if hint equal vec and meet the vec Rx/Tx usage condition then use the neon function. b. if hint equal sve and meet the sve Rx/Tx usage condition then use the sve function. c. if hint equal simple and meet the simple Rx/Tx usage condition then use the simple function. d. if hint equal common then use the common function. e. if hint not set then: e.1. if meet the vec Rx/Tx usage condition then use the neon function. e.2. if meet the simple Rx/Tx usage condition then use the simple function. e.3. else use the common function. Note: the sve Rx/Tx usage condition based on the vec Rx/Tx usage condition and runtime environment (which must support SVE). In the previous versions, driver will preferred use the sve function when meet the sve Rx/Tx usage condition, but in this case driver could get better performance if use the neon function. Signed-off-by: Chengwen Feng Signed-off-by: Min Hu (Connor) --- diff --git a/doc/guides/nics/hns3.rst b/doc/guides/nics/hns3.rst index 84bd7a3c92..ccd2f6fe5c 100644 --- a/doc/guides/nics/hns3.rst +++ b/doc/guides/nics/hns3.rst @@ -46,6 +46,43 @@ Prerequisites - Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. +Runtime Config Options +---------------------- + +- ``rx_func_hint`` (default ``none``) + + Used to select Rx burst function, supported value are ``vec``, ``sve``, + ``simple``, ``common``. + ``vec``, if supported use the ``vec`` Rx function which indicates the + default vector algorithm, neon for Kunpeng Arm platform. + ``sve``, if supported use the ``sve`` Rx function which indicates the + sve algorithm. + ``simple``, if supported use the ``simple`` Rx function which indicates + the scalar algorithm. + ``common``, if supported use the ``common`` Rx function which indicates + the scalar scattered algorithm. + + When provided parameter is not supported, ``vec`` usage condition will + be first checked, if meets, use the ``vec``. Then, ``simple``, at last + ``common``. + +- ``tx_func_hint`` (default ``none``) + + Used to select Tx burst function, supported value are ``vec``, ``sve``, + ``simple``, ``common``. + ``vec``, if supported use the ``vec`` Tx function which indicates the + default vector algorithm, neon for Kunpeng Arm platform. + ``sve``, if supported use the ``sve`` Tx function which indicates the + sve algorithm. + ``simple``, if supported use the ``simple`` Tx function which indicates + the scalar simple algorithm. + ``common``, if supported use the ``common`` Tx function which indicates + the scalar algorithm. + + When provided parameter is not supported, ``vec`` usage condition will + be first checked, if meets, use the ``vec``. Then, ``simple``, at last + ``common``. + Driver compilation and testing ------------------------------ diff --git a/doc/guides/rel_notes/release_21_05.rst b/doc/guides/rel_notes/release_21_05.rst index 0522bf7950..f4ee2f80ac 100644 --- a/doc/guides/rel_notes/release_21_05.rst +++ b/doc/guides/rel_notes/release_21_05.rst @@ -86,6 +86,7 @@ New Features * Added support for module EEPROM dumping. * Added support for freeing Tx mbuf on demand. * Added support for copper port in Kunpeng930. + * Added support for runtime config to select IO burst function. * **Updated NXP DPAA driver.** diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c index 9cbcc13de8..28aa27a3e3 100644 --- a/drivers/net/hns3/hns3_ethdev.c +++ b/drivers/net/hns3/hns3_ethdev.c @@ -6,6 +6,7 @@ #include #include #include +#include #include "hns3_ethdev.h" #include "hns3_logs.h" @@ -6505,6 +6506,78 @@ hns3_get_module_info(struct rte_eth_dev *dev, return 0; } +static int +hns3_parse_io_hint_func(const char *key, const char *value, void *extra_args) +{ + uint32_t hint = HNS3_IO_FUNC_HINT_NONE; + + RTE_SET_USED(key); + + if (strcmp(value, "vec") == 0) + hint = HNS3_IO_FUNC_HINT_VEC; + else if (strcmp(value, "sve") == 0) + hint = HNS3_IO_FUNC_HINT_SVE; + else if (strcmp(value, "simple") == 0) + hint = HNS3_IO_FUNC_HINT_SIMPLE; + else if (strcmp(value, "common") == 0) + hint = HNS3_IO_FUNC_HINT_COMMON; + + /* If the hint is valid then update output parameters */ + if (hint != HNS3_IO_FUNC_HINT_NONE) + *(uint32_t *)extra_args = hint; + + return 0; +} + +static const char * +hns3_get_io_hint_func_name(uint32_t hint) +{ + switch (hint) { + case HNS3_IO_FUNC_HINT_VEC: + return "vec"; + case HNS3_IO_FUNC_HINT_SVE: + return "sve"; + case HNS3_IO_FUNC_HINT_SIMPLE: + return "simple"; + case HNS3_IO_FUNC_HINT_COMMON: + return "common"; + default: + return "none"; + } +} + +void +hns3_parse_devargs(struct rte_eth_dev *dev) +{ + struct hns3_adapter *hns = dev->data->dev_private; + uint32_t rx_func_hint = HNS3_IO_FUNC_HINT_NONE; + uint32_t tx_func_hint = HNS3_IO_FUNC_HINT_NONE; + struct hns3_hw *hw = &hns->hw; + struct rte_kvargs *kvlist; + + if (dev->device->devargs == NULL) + return; + + kvlist = rte_kvargs_parse(dev->device->devargs->args, NULL); + if (!kvlist) + return; + + rte_kvargs_process(kvlist, HNS3_DEVARG_RX_FUNC_HINT, + &hns3_parse_io_hint_func, &rx_func_hint); + rte_kvargs_process(kvlist, HNS3_DEVARG_TX_FUNC_HINT, + &hns3_parse_io_hint_func, &tx_func_hint); + rte_kvargs_free(kvlist); + + if (rx_func_hint != HNS3_IO_FUNC_HINT_NONE) + hns3_warn(hw, "parsed %s = %s.", HNS3_DEVARG_RX_FUNC_HINT, + hns3_get_io_hint_func_name(rx_func_hint)); + hns->rx_func_hint = rx_func_hint; + if (tx_func_hint != HNS3_IO_FUNC_HINT_NONE) + hns3_warn(hw, "parsed %s = %s.", HNS3_DEVARG_TX_FUNC_HINT, + hns3_get_io_hint_func_name(tx_func_hint)); + hns->tx_func_hint = tx_func_hint; +} + static const struct eth_dev_ops hns3_eth_dev_ops = { .dev_configure = hns3_dev_configure, .dev_start = hns3_dev_start, @@ -6625,6 +6698,7 @@ hns3_dev_init(struct rte_eth_dev *eth_dev) hw->adapter_state = HNS3_NIC_UNINITIALIZED; hns->is_vf = false; hw->data = eth_dev->data; + hns3_parse_devargs(eth_dev); /* * Set default max packet size according to the mtu @@ -6758,5 +6832,8 @@ static struct rte_pci_driver rte_hns3_pmd = { RTE_PMD_REGISTER_PCI(net_hns3, rte_hns3_pmd); RTE_PMD_REGISTER_PCI_TABLE(net_hns3, pci_id_hns3_map); RTE_PMD_REGISTER_KMOD_DEP(net_hns3, "* igb_uio | vfio-pci"); +RTE_PMD_REGISTER_PARAM_STRING(net_hns3, + HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common " + HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "); RTE_LOG_REGISTER(hns3_logtype_init, pmd.net.hns3.init, NOTICE); RTE_LOG_REGISTER(hns3_logtype_driver, pmd.net.hns3.driver, NOTICE); diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h index 932600d05b..ec4b475fe7 100644 --- a/drivers/net/hns3/hns3_ethdev.h +++ b/drivers/net/hns3/hns3_ethdev.h @@ -772,9 +772,23 @@ struct hns3_adapter { bool tx_simple_allowed; bool tx_vec_allowed; + uint32_t rx_func_hint; + uint32_t tx_func_hint; + struct hns3_ptype_table ptype_tbl __rte_cache_min_aligned; }; +enum { + HNS3_IO_FUNC_HINT_NONE = 0, + HNS3_IO_FUNC_HINT_VEC, + HNS3_IO_FUNC_HINT_SVE, + HNS3_IO_FUNC_HINT_SIMPLE, + HNS3_IO_FUNC_HINT_COMMON +}; + +#define HNS3_DEVARG_RX_FUNC_HINT "rx_func_hint" +#define HNS3_DEVARG_TX_FUNC_HINT "tx_func_hint" + #define HNS3_DEV_SUPPORT_DCB_B 0x0 #define HNS3_DEV_SUPPORT_COPPER_B 0x1 #define HNS3_DEV_SUPPORT_UDP_GSO_B 0x2 @@ -975,6 +989,7 @@ int hns3_dev_infos_get(struct rte_eth_dev *eth_dev, struct rte_eth_dev_info *info); void hns3vf_update_link_status(struct hns3_hw *hw, uint8_t link_status, uint32_t link_speed, uint8_t link_duplex); +void hns3_parse_devargs(struct rte_eth_dev *dev); static inline bool is_reset_pending(struct hns3_adapter *hns) diff --git a/drivers/net/hns3/hns3_ethdev_vf.c b/drivers/net/hns3/hns3_ethdev_vf.c index fd20c522dc..f3eaefb878 100644 --- a/drivers/net/hns3/hns3_ethdev_vf.c +++ b/drivers/net/hns3/hns3_ethdev_vf.c @@ -2834,6 +2834,7 @@ hns3vf_dev_init(struct rte_eth_dev *eth_dev) hw->adapter_state = HNS3_NIC_UNINITIALIZED; hns->is_vf = true; hw->data = eth_dev->data; + hns3_parse_devargs(eth_dev); ret = hns3_reset_init(hw); if (ret) @@ -2962,3 +2963,6 @@ static struct rte_pci_driver rte_hns3vf_pmd = { RTE_PMD_REGISTER_PCI(net_hns3_vf, rte_hns3vf_pmd); RTE_PMD_REGISTER_PCI_TABLE(net_hns3_vf, pci_id_hns3vf_map); RTE_PMD_REGISTER_KMOD_DEP(net_hns3_vf, "* igb_uio | vfio-pci"); +RTE_PMD_REGISTER_PARAM_STRING(net_hns3_vf, + HNS3_DEVARG_RX_FUNC_HINT "=vec|sve|simple|common " + HNS3_DEVARG_TX_FUNC_HINT "=vec|sve|simple|common "); diff --git a/drivers/net/hns3/hns3_rxtx.c b/drivers/net/hns3/hns3_rxtx.c index 00167c4bd5..f5c7d71f3a 100644 --- a/drivers/net/hns3/hns3_rxtx.c +++ b/drivers/net/hns3/hns3_rxtx.c @@ -2689,13 +2689,26 @@ hns3_get_rx_function(struct rte_eth_dev *dev) { struct hns3_adapter *hns = dev->data->dev_private; uint64_t offloads = dev->data->dev_conf.rxmode.offloads; + bool vec_allowed, sve_allowed, simple_allowed; + + vec_allowed = hns->rx_vec_allowed && + hns3_rx_check_vec_support(dev) == 0; + sve_allowed = vec_allowed && hns3_check_sve_support(); + simple_allowed = hns->rx_simple_allowed && !dev->data->scattered_rx && + (offloads & DEV_RX_OFFLOAD_TCP_LRO) == 0; + + if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_VEC && vec_allowed) + return hns3_recv_pkts_vec; + if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_SVE && sve_allowed) + return hns3_recv_pkts_vec_sve; + if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_SIMPLE && simple_allowed) + return hns3_recv_pkts; + if (hns->rx_func_hint == HNS3_IO_FUNC_HINT_COMMON) + return hns3_recv_scattered_pkts; - if (hns->rx_vec_allowed && hns3_rx_check_vec_support(dev) == 0) - return hns3_check_sve_support() ? hns3_recv_pkts_vec_sve : - hns3_recv_pkts_vec; - - if (hns->rx_simple_allowed && !dev->data->scattered_rx && - (offloads & DEV_RX_OFFLOAD_TCP_LRO) == 0) + if (vec_allowed) + return hns3_recv_pkts_vec; + if (simple_allowed) return hns3_recv_pkts; return hns3_recv_scattered_pkts; @@ -3930,19 +3943,32 @@ hns3_get_tx_function(struct rte_eth_dev *dev, eth_tx_prep_t *prep) { uint64_t offloads = dev->data->dev_conf.txmode.offloads; struct hns3_adapter *hns = dev->data->dev_private; + bool vec_allowed, sve_allowed, simple_allowed; - if (hns->tx_vec_allowed && hns3_tx_check_vec_support(dev) == 0) { - *prep = NULL; - return hns3_check_sve_support() ? hns3_xmit_pkts_vec_sve : - hns3_xmit_pkts_vec; - } + vec_allowed = hns->tx_vec_allowed && + hns3_tx_check_vec_support(dev) == 0; + sve_allowed = vec_allowed && hns3_check_sve_support(); + simple_allowed = hns->tx_simple_allowed && + offloads == (offloads & DEV_TX_OFFLOAD_MBUF_FAST_FREE); - if (hns->tx_simple_allowed && - offloads == (offloads & DEV_TX_OFFLOAD_MBUF_FAST_FREE)) { - *prep = NULL; + *prep = NULL; + + if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_VEC && vec_allowed) + return hns3_xmit_pkts_vec; + if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_SVE && sve_allowed) + return hns3_xmit_pkts_vec_sve; + if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_SIMPLE && simple_allowed) return hns3_xmit_pkts_simple; + if (hns->tx_func_hint == HNS3_IO_FUNC_HINT_COMMON) { + *prep = hns3_prep_pkts; + return hns3_xmit_pkts; } + if (vec_allowed) + return hns3_xmit_pkts_vec; + if (simple_allowed) + return hns3_xmit_pkts_simple; + *prep = hns3_prep_pkts; return hns3_xmit_pkts; }