From: Liang Ma Date: Fri, 19 Oct 2018 11:07:19 +0000 (+0100) Subject: examples/l3fwd-power: support traffic pattern aware control X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=a137d012a0dd;p=dpdk.git examples/l3fwd-power: support traffic pattern aware control Add the support for new traffic pattern aware power control power management API. Example: ./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 Please Reference l3fwd-power document for full parameter usage The option "l", "m", "h" are used to set the power index for LOW, MED, HIGH power state. Only is useful after enable empty-poll --empty-poll="training_flag, med_threshold, high_threshold" The option training_flag is used to enable/disable training mode. The option med_threshold is used to indicate the empty poll threshold of modest state which is customized by user. The option high_threshold is used to indicate the empty poll threshold of busy state which is customized by user. Above three option default value is all 0. Once enable empty-poll. System will apply the default parameter if no other command line options are provided. If training mode is enabled, the user should ensure that no traffic is allowed to pass through the system. When training phase complete, the application transfer to normal operation System will start running with the modest power mode. If the traffic goes above 70%, then system will move to High power state. If the traffic drops below 30%, the system will fallback to the modest power state. Example code use master thread to monitoring worker thread busyness. The default timer resolution is 10ms. Signed-off-by: Liang Ma Reviewed-by: Lei Yao Acked-by: David Hunt --- diff --git a/doc/guides/sample_app_ug/l3_forward_power_man.rst b/doc/guides/sample_app_ug/l3_forward_power_man.rst index 795a570bff..e44a11b2ce 100644 --- a/doc/guides/sample_app_ug/l3_forward_power_man.rst +++ b/doc/guides/sample_app_ug/l3_forward_power_man.rst @@ -105,6 +105,8 @@ where, * --no-numa: optional, disables numa awareness +* --empty-poll: Traffic Aware power management. See below for details + See :doc:`l3_forward` for details. The L3fwd-power example reuses the L3fwd command line options. @@ -362,3 +364,70 @@ The algorithm has the following sleeping behavior depending on the idle counter: If a thread polls multiple Rx queues and different queue returns different sleep duration values, the algorithm controls the sleep time in a conservative manner by sleeping for the least possible time in order to avoid a potential performance impact. + +Empty Poll Mode +------------------------- +Additionally, there is a traffic aware mode of operation called "Empty +Poll" where the number of empty polls can be monitored to keep track +of how busy the application is. Empty poll mode can be enabled by the +command line option --empty-poll. + +See :doc:`Power Management<../prog_guide/power_man>` chapter in the DPDK Programmer's Guide for empty poll mode details. + +.. code-block:: console + + ./l3fwd-power -l xxx -n 4 -w 0000:xx:00.0 -w 0000:xx:00.1 -- -p 0x3 -P --config="(0,0,xx),(1,0,xx)" --empty-poll="0,0,0" -l 14 -m 9 -h 1 + +Where, + +--empty-poll: Enable the empty poll mode instead of original algorithm + +--empty-poll="training_flag, med_threshold, high_threshold" + +* ``training_flag`` : optional, enable/disable training mode. Default value is 0. If the training_flag is set as 1(true), then the application will start in training mode and print out the trained threshold values. If the training_flag is set as 0(false), the application will start in normal mode, and will use either the default thresholds or those supplied on the command line. The trained threshold values are specific to the user’s system, may give a better power profile when compared to the default threshold values. + +* ``med_threshold`` : optional, sets the empty poll threshold of a modestly busy system state. If this is not supplied, the application will apply the default value of 350000. + +* ``high_threshold`` : optional, sets the empty poll threshold of a busy system state. If this is not supplied, the application will apply the default value of 580000. + +* -l : optional, set up the LOW power state frequency index + +* -m : optional, set up the MED power state frequency index + +* -h : optional, set up the HIGH power state frequency index + +Empty Poll Mode Example Usage +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ +To initially obtain the ideal thresholds for the system, the training +mode should be run first. This is achieved by running the l3fwd-power +app with the training flag set to “1”, and the other parameters set to +0. + +.. code-block:: console + + ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "1,0,0" –P + +This will run the training algorithm for x seconds on each core (cores 2 +and 3), and then print out the recommended threshold values for those +cores. The thresholds should be very similar for each core. + +.. code-block:: console + + POWER: Bring up the Timer + POWER: set the power freq to MED + POWER: Low threshold is 230277 + POWER: MED threshold is 335071 + POWER: HIGH threshold is 523769 + POWER: Training is Complete for 2 + POWER: set the power freq to MED + POWER: Low threshold is 236814 + POWER: MED threshold is 344567 + POWER: HIGH threshold is 538580 + POWER: Training is Complete for 3 + +Once the values have been measured for a particular system, the app can +then be started without the training mode so traffic can start immediately. + +.. code-block:: console + + ./examples/l3fwd-power/build/l3fwd-power -l 1-3 -- -p 0x0f --config="(0,0,2),(0,1,3)" --empty-poll "0,340000,540000" –P diff --git a/examples/l3fwd-power/Makefile b/examples/l3fwd-power/Makefile index d7e39a3439..772ec7ba5f 100644 --- a/examples/l3fwd-power/Makefile +++ b/examples/l3fwd-power/Makefile @@ -23,6 +23,8 @@ CFLAGS += -O3 $(shell pkg-config --cflags libdpdk) LDFLAGS_SHARED = $(shell pkg-config --libs libdpdk) LDFLAGS_STATIC = -Wl,-Bstatic $(shell pkg-config --static --libs libdpdk) +CFLAGS += -DALLOW_EXPERIMENTAL_API + build/$(APP)-shared: $(SRCS-y) Makefile $(PC_FILE) | build $(CC) $(CFLAGS) $(SRCS-y) -o $@ $(LDFLAGS) $(LDFLAGS_SHARED) @@ -54,6 +56,7 @@ please change the definition of the RTE_TARGET environment variable) all: else +CFLAGS += -DALLOW_EXPERIMENTAL_API CFLAGS += -O3 CFLAGS += $(WERROR_FLAGS) diff --git a/examples/l3fwd-power/main.c b/examples/l3fwd-power/main.c index 68527d26f6..c07eeff10f 100644 --- a/examples/l3fwd-power/main.c +++ b/examples/l3fwd-power/main.c @@ -43,6 +43,7 @@ #include #include #include +#include #include "perf_core.h" #include "main.h" @@ -55,6 +56,8 @@ /* 100 ms interval */ #define TIMER_NUMBER_PER_SECOND 10 +/* (10ms) */ +#define INTERVALS_PER_SECOND 100 /* 100000 us */ #define SCALING_PERIOD (1000000/TIMER_NUMBER_PER_SECOND) #define SCALING_DOWN_TIME_RATIO_THRESHOLD 0.25 @@ -117,6 +120,17 @@ */ #define RTE_TEST_RX_DESC_DEFAULT 1024 #define RTE_TEST_TX_DESC_DEFAULT 1024 + +/* + * These two thresholds were decided on by running the training algorithm on + * a 2.5GHz Xeon. These defaults can be overridden by supplying non-zero values + * for the med_threshold and high_threshold parameters on the command line. + */ +#define EMPTY_POLL_MED_THRESHOLD 350000UL +#define EMPTY_POLL_HGH_THRESHOLD 580000UL + + + static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; @@ -132,6 +146,14 @@ static uint32_t enabled_port_mask = 0; static int promiscuous_on = 0; /* NUMA is enabled by default. */ static int numa_on = 1; +/* emptypoll is disabled by default. */ +static bool empty_poll_on; +static bool empty_poll_train; +volatile bool empty_poll_stop; +static struct ep_params *ep_params; +static struct ep_policy policy; +static long ep_med_edpi, ep_hgh_edpi; + static int parse_ptype; /**< Parse packet type using rx callback, and */ /**< disabled by default */ @@ -330,6 +352,19 @@ static inline uint32_t power_idle_heuristic(uint32_t zero_rx_packet_count); static inline enum freq_scale_hint_t power_freq_scaleup_heuristic( \ unsigned int lcore_id, uint16_t port_id, uint16_t queue_id); + +/* + * These defaults are using the max frequency index (1), a medium index (9) + * and a typical low frequency index (14). These can be adjusted to use + * different indexes using the relevant command line parameters. + */ +static uint8_t freq_tlb[] = {14, 9, 1}; + +static int is_done(void) +{ + return empty_poll_stop; +} + /* exit signal handler */ static void signal_exit_now(int sigtype) @@ -338,7 +373,15 @@ signal_exit_now(int sigtype) unsigned int portid; int ret; + RTE_SET_USED(lcore_id); + RTE_SET_USED(portid); + RTE_SET_USED(ret); + if (sigtype == SIGINT) { + if (empty_poll_on) + empty_poll_stop = true; + + for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) { if (rte_lcore_is_enabled(lcore_id) == 0) continue; @@ -351,16 +394,19 @@ signal_exit_now(int sigtype) "core%u\n", lcore_id); } - RTE_ETH_FOREACH_DEV(portid) { - if ((enabled_port_mask & (1 << portid)) == 0) - continue; + if (!empty_poll_on) { + RTE_ETH_FOREACH_DEV(portid) { + if ((enabled_port_mask & (1 << portid)) == 0) + continue; - rte_eth_dev_stop(portid); - rte_eth_dev_close(portid); + rte_eth_dev_stop(portid); + rte_eth_dev_close(portid); + } } } - rte_exit(EXIT_SUCCESS, "User forced exit\n"); + if (!empty_poll_on) + rte_exit(EXIT_SUCCESS, "User forced exit\n"); } /* Freqency scale down timer callback */ @@ -825,7 +871,110 @@ static int event_register(struct lcore_conf *qconf) return 0; } +/* main processing loop */ +static int +main_empty_poll_loop(__attribute__((unused)) void *dummy) +{ + struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; + unsigned int lcore_id; + uint64_t prev_tsc, diff_tsc, cur_tsc; + int i, j, nb_rx; + uint8_t queueid; + uint16_t portid; + struct lcore_conf *qconf; + struct lcore_rx_queue *rx_queue; + + const uint64_t drain_tsc = + (rte_get_tsc_hz() + US_PER_S - 1) / + US_PER_S * BURST_TX_DRAIN_US; + + prev_tsc = 0; + + lcore_id = rte_lcore_id(); + qconf = &lcore_conf[lcore_id]; + + if (qconf->n_rx_queue == 0) { + RTE_LOG(INFO, L3FWD_POWER, "lcore %u has nothing to do\n", + lcore_id); + return 0; + } + + for (i = 0; i < qconf->n_rx_queue; i++) { + portid = qconf->rx_queue_list[i].port_id; + queueid = qconf->rx_queue_list[i].queue_id; + RTE_LOG(INFO, L3FWD_POWER, " -- lcoreid=%u portid=%u " + "rxqueueid=%hhu\n", lcore_id, portid, queueid); + } + + while (!is_done()) { + stats[lcore_id].nb_iteration_looped++; + + cur_tsc = rte_rdtsc(); + /* + * TX burst queue drain + */ + diff_tsc = cur_tsc - prev_tsc; + if (unlikely(diff_tsc > drain_tsc)) { + for (i = 0; i < qconf->n_tx_port; ++i) { + portid = qconf->tx_port_id[i]; + rte_eth_tx_buffer_flush(portid, + qconf->tx_queue_id[portid], + qconf->tx_buffer[portid]); + } + prev_tsc = cur_tsc; + } + + /* + * Read packet from RX queues + */ + for (i = 0; i < qconf->n_rx_queue; ++i) { + rx_queue = &(qconf->rx_queue_list[i]); + rx_queue->idle_hint = 0; + portid = rx_queue->port_id; + queueid = rx_queue->queue_id; + + nb_rx = rte_eth_rx_burst(portid, queueid, pkts_burst, + MAX_PKT_BURST); + + stats[lcore_id].nb_rx_processed += nb_rx; + + if (nb_rx == 0) { + + rte_power_empty_poll_stat_update(lcore_id); + + continue; + } else { + rte_power_poll_stat_update(lcore_id, nb_rx); + } + + + /* Prefetch first packets */ + for (j = 0; j < PREFETCH_OFFSET && j < nb_rx; j++) { + rte_prefetch0(rte_pktmbuf_mtod( + pkts_burst[j], void *)); + } + + /* Prefetch and forward already prefetched packets */ + for (j = 0; j < (nb_rx - PREFETCH_OFFSET); j++) { + rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[ + j + PREFETCH_OFFSET], + void *)); + l3fwd_simple_forward(pkts_burst[j], portid, + qconf); + } + + /* Forward remaining prefetched packets */ + for (; j < nb_rx; j++) { + l3fwd_simple_forward(pkts_burst[j], portid, + qconf); + } + + } + } + + return 0; +} /* main processing loop */ static int main_loop(__attribute__((unused)) void *dummy) @@ -1127,7 +1276,9 @@ print_usage(const char *prgname) " --no-numa: optional, disable numa awareness\n" " --enable-jumbo: enable jumbo frame" " which max packet len is PKTLEN in decimal (64-9600)\n" - " --parse-ptype: parse packet type by software\n", + " --parse-ptype: parse packet type by software\n" + " --empty-poll: enable empty poll detection" + " follow (training_flag, high_threshold, med_threshold)\n", prgname); } @@ -1220,7 +1371,55 @@ parse_config(const char *q_arg) return 0; } +static int +parse_ep_config(const char *q_arg) +{ + char s[256]; + const char *p = q_arg; + char *end; + int num_arg; + + char *str_fld[3]; + + int training_flag; + int med_edpi; + int hgh_edpi; + + ep_med_edpi = EMPTY_POLL_MED_THRESHOLD; + ep_hgh_edpi = EMPTY_POLL_MED_THRESHOLD; + + snprintf(s, sizeof(s), "%s", p); + + num_arg = rte_strsplit(s, sizeof(s), str_fld, 3, ','); + + empty_poll_train = false; + if (num_arg == 0) + return 0; + + if (num_arg == 3) { + + training_flag = strtoul(str_fld[0], &end, 0); + med_edpi = strtoul(str_fld[1], &end, 0); + hgh_edpi = strtoul(str_fld[2], &end, 0); + + if (training_flag == 1) + empty_poll_train = true; + + if (med_edpi > 0) + ep_med_edpi = med_edpi; + + if (med_edpi > 0) + ep_hgh_edpi = hgh_edpi; + + } else { + + return -1; + } + + return 0; + +} #define CMD_LINE_OPT_PARSE_PTYPE "parse-ptype" /* Parse the argument given in the command line of the application */ @@ -1230,6 +1429,7 @@ parse_args(int argc, char **argv) int opt, ret; char **argvopt; int option_index; + uint32_t limit; char *prgname = argv[0]; static struct option lgopts[] = { {"config", 1, 0, 0}, @@ -1237,13 +1437,14 @@ parse_args(int argc, char **argv) {"high-perf-cores", 1, 0, 0}, {"no-numa", 0, 0, 0}, {"enable-jumbo", 0, 0, 0}, + {"empty-poll", 1, 0, 0}, {CMD_LINE_OPT_PARSE_PTYPE, 0, 0, 0}, {NULL, 0, 0, 0} }; argvopt = argv; - while ((opt = getopt_long(argc, argvopt, "p:P", + while ((opt = getopt_long(argc, argvopt, "p:l:m:h:P", lgopts, &option_index)) != EOF) { switch (opt) { @@ -1260,7 +1461,18 @@ parse_args(int argc, char **argv) printf("Promiscuous mode selected\n"); promiscuous_on = 1; break; - + case 'l': + limit = parse_max_pkt_len(optarg); + freq_tlb[LOW] = limit; + break; + case 'm': + limit = parse_max_pkt_len(optarg); + freq_tlb[MED] = limit; + break; + case 'h': + limit = parse_max_pkt_len(optarg); + freq_tlb[HGH] = limit; + break; /* long options */ case 0: if (!strncmp(lgopts[option_index].name, "config", 6)) { @@ -1298,6 +1510,20 @@ parse_args(int argc, char **argv) numa_on = 0; } + if (!strncmp(lgopts[option_index].name, + "empty-poll", 10)) { + printf("empty-poll is enabled\n"); + empty_poll_on = true; + ret = parse_ep_config(optarg); + + if (ret) { + printf("invalid empty poll config\n"); + print_usage(prgname); + return -1; + } + + } + if (!strncmp(lgopts[option_index].name, "enable-jumbo", 12)) { struct option lenopts = @@ -1646,6 +1872,59 @@ init_power_library(void) } return ret; } +static void +empty_poll_setup_timer(void) +{ + int lcore_id = rte_lcore_id(); + uint64_t hz = rte_get_timer_hz(); + + struct ep_params *ep_ptr = ep_params; + + ep_ptr->interval_ticks = hz / INTERVALS_PER_SECOND; + + rte_timer_reset_sync(&ep_ptr->timer0, + ep_ptr->interval_ticks, + PERIODICAL, + lcore_id, + rte_empty_poll_detection, + (void *)ep_ptr); + +} +static int +launch_timer(unsigned int lcore_id) +{ + int64_t prev_tsc = 0, cur_tsc, diff_tsc, cycles_10ms; + + RTE_SET_USED(lcore_id); + + + if (rte_get_master_lcore() != lcore_id) { + rte_panic("timer on lcore:%d which is not master core:%d\n", + lcore_id, + rte_get_master_lcore()); + } + + RTE_LOG(INFO, POWER, "Bring up the Timer\n"); + + empty_poll_setup_timer(); + + cycles_10ms = rte_get_timer_hz() / 100; + + while (!is_done()) { + cur_tsc = rte_rdtsc(); + diff_tsc = cur_tsc - prev_tsc; + if (diff_tsc > cycles_10ms) { + rte_timer_manage(); + prev_tsc = cur_tsc; + cycles_10ms = rte_get_timer_hz() / 100; + } + } + + RTE_LOG(INFO, POWER, "Timer_subsystem is done\n"); + + return 0; +} + int main(int argc, char **argv) @@ -1828,13 +2107,15 @@ main(int argc, char **argv) if (rte_lcore_is_enabled(lcore_id) == 0) continue; - /* init timer structures for each enabled lcore */ - rte_timer_init(&power_timers[lcore_id]); - hz = rte_get_timer_hz(); - rte_timer_reset(&power_timers[lcore_id], - hz/TIMER_NUMBER_PER_SECOND, SINGLE, lcore_id, - power_timer_cb, NULL); - + if (empty_poll_on == false) { + /* init timer structures for each enabled lcore */ + rte_timer_init(&power_timers[lcore_id]); + hz = rte_get_timer_hz(); + rte_timer_reset(&power_timers[lcore_id], + hz/TIMER_NUMBER_PER_SECOND, + SINGLE, lcore_id, + power_timer_cb, NULL); + } qconf = &lcore_conf[lcore_id]; printf("\nInitializing rx queues on lcore %u ... ", lcore_id ); fflush(stdout); @@ -1905,12 +2186,43 @@ main(int argc, char **argv) check_all_ports_link_status(enabled_port_mask); + if (empty_poll_on == true) { + + if (empty_poll_train) { + policy.state = TRAINING; + } else { + policy.state = MED_NORMAL; + policy.med_base_edpi = ep_med_edpi; + policy.hgh_base_edpi = ep_hgh_edpi; + } + + ret = rte_power_empty_poll_stat_init(&ep_params, + freq_tlb, + &policy); + if (ret < 0) + rte_exit(EXIT_FAILURE, "empty poll init failed"); + } + + /* launch per-lcore init on every lcore */ - rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER); + if (empty_poll_on == false) { + rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER); + } else { + empty_poll_stop = false; + rte_eal_mp_remote_launch(main_empty_poll_loop, NULL, + SKIP_MASTER); + } + + if (empty_poll_on == true) + launch_timer(rte_lcore_id()); + RTE_LCORE_FOREACH_SLAVE(lcore_id) { if (rte_eal_wait_lcore(lcore_id) < 0) return -1; } + if (empty_poll_on) + rte_power_empty_poll_stat_free(); + return 0; } diff --git a/examples/l3fwd-power/meson.build b/examples/l3fwd-power/meson.build index 20c805436f..a3c5c2f14f 100644 --- a/examples/l3fwd-power/meson.build +++ b/examples/l3fwd-power/meson.build @@ -9,6 +9,7 @@ if host_machine.system() != 'linux' build = false endif +allow_experimental_apis = true deps += ['power', 'timer', 'lpm', 'hash'] sources = files( 'main.c', 'perf_core.c'