From: Guinan Sun Date: Tue, 18 Feb 2020 03:39:31 +0000 (+0000) Subject: net/ixgbe: fix flow control mode setting X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=a524f550da6e6c7a308ce7c2f4b6c3be60b5cbfa;p=dpdk.git net/ixgbe: fix flow control mode setting When the port restarts, the flow ctrl register will be reset, we need to make sure it can be configured the same as previous setting, otherwise a register read error would occur. This patch fixes this issue. Fixes: af75078fece3 ("first public release") Cc: stable@dpdk.org Signed-off-by: Guinan Sun Tested-by: Tomasz Konieczny Reviewed-by: Xiaolong Ye --- diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 0ef84a2861..23b3f5b0cd 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -1176,8 +1176,8 @@ eth_ixgbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused) memset(dcb_config, 0, sizeof(struct ixgbe_dcb_config)); ixgbe_dcb_init(hw, dcb_config); /* Get Hardware Flow Control setting */ - hw->fc.requested_mode = ixgbe_fc_full; - hw->fc.current_mode = ixgbe_fc_full; + hw->fc.requested_mode = ixgbe_fc_none; + hw->fc.current_mode = ixgbe_fc_none; hw->fc.pause_time = IXGBE_FC_PAUSE; for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { hw->fc.low_water[i] = IXGBE_FC_LO; @@ -2538,6 +2538,39 @@ ixgbe_set_vf_rate_limit(struct rte_eth_dev *dev, uint16_t vf, return 0; } +static int +ixgbe_flow_ctrl_enable(struct rte_eth_dev *dev, struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = dev->data->dev_private; + int err; + uint32_t mflcn; + + err = ixgbe_fc_enable(hw); + + /* Not negotiated is not an error case */ + if (err == IXGBE_SUCCESS || err == IXGBE_ERR_FC_NOT_NEGOTIATED) { + /* + *check if we want to forward MAC frames - driver doesn't + *have native capability to do that, + *so we'll write the registers ourselves + */ + + mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); + + /* set or clear MFLCN.PMCF bit depending on configuration */ + if (adapter->mac_ctrl_frame_fwd != 0) + mflcn |= IXGBE_MFLCN_PMCF; + else + mflcn &= ~IXGBE_MFLCN_PMCF; + + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn); + IXGBE_WRITE_FLUSH(hw); + + return 0; + } + return err; +} + /* * Configure device link speed and setup link. * It returns 0 on success. @@ -2664,6 +2697,12 @@ ixgbe_dev_start(struct rte_eth_dev *dev) ixgbe_restore_statistics_mapping(dev); + err = ixgbe_flow_ctrl_enable(dev, hw); + if (err < 0) { + PMD_INIT_LOG(ERR, "enable flow ctrl err"); + goto error; + } + err = ixgbe_dev_rxtx_start(dev); if (err < 0) { PMD_INIT_LOG(ERR, "Unable to start rxtx queues"); @@ -2900,6 +2939,8 @@ ixgbe_dev_stop(struct rte_eth_dev *dev) adapter->rss_reta_updated = 0; + adapter->mac_ctrl_frame_fwd = 0; + hw->adapter_stopped = true; } @@ -4718,10 +4759,10 @@ static int ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) { struct ixgbe_hw *hw; + struct ixgbe_adapter *adapter = dev->data->dev_private; int err; uint32_t rx_buf_size; uint32_t max_high_water; - uint32_t mflcn; enum ixgbe_fc_mode rte_fcmode_2_ixgbe_fcmode[] = { ixgbe_fc_none, ixgbe_fc_rx_pause, @@ -4754,31 +4795,14 @@ ixgbe_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf) hw->fc.low_water[0] = fc_conf->low_water; hw->fc.send_xon = fc_conf->send_xon; hw->fc.disable_fc_autoneg = !fc_conf->autoneg; + adapter->mac_ctrl_frame_fwd = fc_conf->mac_ctrl_frame_fwd; - err = ixgbe_fc_enable(hw); - - /* Not negotiated is not an error case */ - if ((err == IXGBE_SUCCESS) || (err == IXGBE_ERR_FC_NOT_NEGOTIATED)) { - - /* check if we want to forward MAC frames - driver doesn't have native - * capability to do that, so we'll write the registers ourselves */ - - mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); - - /* set or clear MFLCN.PMCF bit depending on configuration */ - if (fc_conf->mac_ctrl_frame_fwd != 0) - mflcn |= IXGBE_MFLCN_PMCF; - else - mflcn &= ~IXGBE_MFLCN_PMCF; - - IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn); - IXGBE_WRITE_FLUSH(hw); - - return 0; + err = ixgbe_flow_ctrl_enable(dev, hw); + if (err < 0) { + PMD_INIT_LOG(ERR, "ixgbe_flow_ctrl_enable = 0x%x", err); + return -EIO; } - - PMD_INIT_LOG(ERR, "ixgbe_fc_enable = 0x%x", err); - return -EIO; + return err; } /** diff --git a/drivers/net/ixgbe/ixgbe_ethdev.h b/drivers/net/ixgbe/ixgbe_ethdev.h index 5089347a7e..b8df756575 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.h +++ b/drivers/net/ixgbe/ixgbe_ethdev.h @@ -511,6 +511,7 @@ struct ixgbe_adapter { * mailbox status) link status. */ uint8_t pflink_fullchk; + uint8_t mac_ctrl_frame_fwd; rte_atomic32_t link_thread_running; pthread_t link_thread_tid; };