From: Andrew Rybchenko Date: Thu, 7 Feb 2019 16:29:32 +0000 (+0000) Subject: net/sfc/base: update auto-generated MCDI definition headers X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=a826a7c6f98b4c18bd5fc6010a35dcf2736ec742;p=dpdk.git net/sfc/base: update auto-generated MCDI definition headers Signed-off-by: Andrew Rybchenko --- diff --git a/drivers/net/sfc/base/ef10_tlv_layout.h b/drivers/net/sfc/base/ef10_tlv_layout.h index 56cffaee39..eaf24c5699 100644 --- a/drivers/net/sfc/base/ef10_tlv_layout.h +++ b/drivers/net/sfc/base/ef10_tlv_layout.h @@ -1008,4 +1008,21 @@ struct tlv_l3xudp_ports { #define TLV_TAG_L3XUDP_PORTS_MAX_NUM_PORTS 16 }; +/* Wake on LAN setting + * + * Enables the Wake On Lan (WoL) functionality on the given port. This will be + * a persistent setting for manageability firmware. Drivers have direct access + * to WoL using MCDI. + */ +#define TLV_TAG_WAKE_ON_LAN(port) (0x102b0000 + (port)) +struct tlv_wake_on_lan { + uint32_t tag; + uint32_t length; + uint8_t mode; + uint8_t bytes[]; +#define TLV_WAKE_ON_LAN_MODE_DISABLED 0 +#define TLV_WAKE_ON_LAN_MODE_MAGIC_PACKET 1 +#define TLV_WAKE_ON_LAN_MAX_NUM_BYTES 255 +}; + #endif /* CI_MGMT_TLV_LAYOUT_H */ diff --git a/drivers/net/sfc/base/efx_regs_mcdi.h b/drivers/net/sfc/base/efx_regs_mcdi.h index cf8a7936e4..bc44602ed6 100644 --- a/drivers/net/sfc/base/efx_regs_mcdi.h +++ b/drivers/net/sfc/base/efx_regs_mcdi.h @@ -4,7 +4,11 @@ * All rights reserved. */ -/*! \cidoxg_firmware_mc_cmd */ +/* + * This file is automatically generated. DO NOT EDIT IT. + * To make changes, edit the .yml files in sfregistry under doc/mcdi/ and + * rebuild this file with "make -C doc mcdiheaders". + */ #ifndef _SIENA_MC_DRIVER_PCOL_H #define _SIENA_MC_DRIVER_PCOL_H @@ -174,138 +178,9 @@ #define FSE_AZ_EV_CODE_MCDI_EVRESPONSE 0xc -/* Operation not permitted. */ -#define MC_CMD_ERR_EPERM 1 -/* Non-existent command target */ -#define MC_CMD_ERR_ENOENT 2 -/* assert() has killed the MC */ -#define MC_CMD_ERR_EINTR 4 -/* I/O failure */ -#define MC_CMD_ERR_EIO 5 -/* Already exists */ -#define MC_CMD_ERR_EEXIST 6 -/* Try again */ -#define MC_CMD_ERR_EAGAIN 11 -/* Out of memory */ -#define MC_CMD_ERR_ENOMEM 12 -/* Caller does not hold required locks */ -#define MC_CMD_ERR_EACCES 13 -/* Resource is currently unavailable (e.g. lock contention) */ -#define MC_CMD_ERR_EBUSY 16 -/* No such device */ -#define MC_CMD_ERR_ENODEV 19 -/* Invalid argument to target */ -#define MC_CMD_ERR_EINVAL 22 -/* Broken pipe */ -#define MC_CMD_ERR_EPIPE 32 -/* Read-only */ -#define MC_CMD_ERR_EROFS 30 -/* Out of range */ -#define MC_CMD_ERR_ERANGE 34 -/* Non-recursive resource is already acquired */ -#define MC_CMD_ERR_EDEADLK 35 -/* Operation not implemented */ -#define MC_CMD_ERR_ENOSYS 38 -/* Operation timed out */ -#define MC_CMD_ERR_ETIME 62 -/* Link has been severed */ -#define MC_CMD_ERR_ENOLINK 67 -/* Protocol error */ -#define MC_CMD_ERR_EPROTO 71 -/* Operation not supported */ -#define MC_CMD_ERR_ENOTSUP 95 -/* Address not available */ -#define MC_CMD_ERR_EADDRNOTAVAIL 99 -/* Not connected */ -#define MC_CMD_ERR_ENOTCONN 107 -/* Operation already in progress */ -#define MC_CMD_ERR_EALREADY 114 - -/* Resource allocation failed. */ -#define MC_CMD_ERR_ALLOC_FAIL 0x1000 -/* V-adaptor not found. */ -#define MC_CMD_ERR_NO_VADAPTOR 0x1001 -/* EVB port not found. */ -#define MC_CMD_ERR_NO_EVB_PORT 0x1002 -/* V-switch not found. */ -#define MC_CMD_ERR_NO_VSWITCH 0x1003 -/* Too many VLAN tags. */ -#define MC_CMD_ERR_VLAN_LIMIT 0x1004 -/* Bad PCI function number. */ -#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005 -/* Invalid VLAN mode. */ -#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006 -/* Invalid v-switch type. */ -#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007 -/* Invalid v-port type. */ -#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008 -/* MAC address exists. */ -#define MC_CMD_ERR_MAC_EXIST 0x1009 -/* Slave core not present */ -#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a -/* The datapath is disabled. */ -#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b -/* The requesting client is not a function */ -#define MC_CMD_ERR_CLIENT_NOT_FN 0x100c -/* The requested operation might require the - command to be passed between MCs, and the - transport doesn't support that. Should - only ever been seen over the UART. */ -#define MC_CMD_ERR_TRANSPORT_NOPROXY 0x100d -/* VLAN tag(s) exists */ -#define MC_CMD_ERR_VLAN_EXIST 0x100e -/* No MAC address assigned to an EVB port */ -#define MC_CMD_ERR_NO_MAC_ADDR 0x100f -/* Notifies the driver that the request has been relayed - * to an admin function for authorization. The driver should - * wait for a PROXY_RESPONSE event and then resend its request. - * This error code is followed by a 32-bit handle that - * helps matching it with the respective PROXY_RESPONSE event. */ -#define MC_CMD_ERR_PROXY_PENDING 0x1010 -#define MC_CMD_ERR_PROXY_PENDING_HANDLE_OFST 4 -/* The request cannot be passed for authorization because - * another request from the same function is currently being - * authorized. The drvier should try again later. */ -#define MC_CMD_ERR_PROXY_INPROGRESS 0x1011 -/* Returned by MC_CMD_PROXY_COMPLETE if the caller is not the function - * that has enabled proxying or BLOCK_INDEX points to a function that - * doesn't await an authorization. */ -#define MC_CMD_ERR_PROXY_UNEXPECTED 0x1012 -/* This code is currently only used internally in FW. Its meaning is that - * an operation failed due to lack of SR-IOV privilege. - * Normally it is translated to EPERM by send_cmd_err(), - * but it may also be used to trigger some special mechanism - * for handling such case, e.g. to relay the failed request - * to a designated admin function for authorization. */ -#define MC_CMD_ERR_NO_PRIVILEGE 0x1013 -/* Workaround 26807 could not be turned on/off because some functions - * have already installed filters. See the comment at - * MC_CMD_WORKAROUND_BUG26807. - * May also returned for other operations such as sub-variant switching. */ -#define MC_CMD_ERR_FILTERS_PRESENT 0x1014 -/* The clock whose frequency you've attempted to set set - * doesn't exist on this NIC */ -#define MC_CMD_ERR_NO_CLOCK 0x1015 -/* Returned by MC_CMD_TESTASSERT if the action that should - * have caused an assertion failed to do so. */ -#define MC_CMD_ERR_UNREACHABLE 0x1016 -/* This command needs to be processed in the background but there were no - * resources to do so. Send it again after a command has completed. */ -#define MC_CMD_ERR_QUEUE_FULL 0x1017 -/* The operation could not be completed because the PCIe link has gone - * away. This error code is never expected to be returned over the TLP - * transport. */ -#define MC_CMD_ERR_NO_PCIE 0x1018 -/* The operation could not be completed because the datapath has gone - * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the - * datapath absence may be temporary*/ -#define MC_CMD_ERR_NO_DATAPATH 0x1019 -/* The operation could not complete because some VIs are allocated */ -#define MC_CMD_ERR_VIS_PRESENT 0x101a -/* The operation could not complete because some PIO buffers are allocated */ -#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b #define MC_CMD_ERR_CODE_OFST 0 +#define MC_CMD_ERR_PROXY_PENDING_HANDLE_OFST 4 /* We define 8 "escape" commands to allow for command number space extension */ @@ -376,12 +251,163 @@ */ #define MC_CMD_ERR_ARG_OFST 4 -/* No space */ -#define MC_CMD_ERR_ENOSPC 28 - #endif -/* MCDI_EVENT structuredef */ +/* MC_CMD_ERR enum: Public MCDI error codes. Error codes that correspond to + * POSIX errnos should use the same numeric values that linux does. Error codes + * specific to Solarflare firmware should use values in the range 0x1000 - + * 0x10ff. The range 0x2000 - 0x20ff is reserved for private error codes (see + * MC_CMD_ERR_PRIV below). + */ +/* enum: Operation not permitted. */ +#define MC_CMD_ERR_EPERM 0x1 +/* enum: Non-existent command target */ +#define MC_CMD_ERR_ENOENT 0x2 +/* enum: assert() has killed the MC */ +#define MC_CMD_ERR_EINTR 0x4 +/* enum: I/O failure */ +#define MC_CMD_ERR_EIO 0x5 +/* enum: Already exists */ +#define MC_CMD_ERR_EEXIST 0x6 +/* enum: Try again */ +#define MC_CMD_ERR_EAGAIN 0xb +/* enum: Out of memory */ +#define MC_CMD_ERR_ENOMEM 0xc +/* enum: Caller does not hold required locks */ +#define MC_CMD_ERR_EACCES 0xd +/* enum: Resource is currently unavailable (e.g. lock contention) */ +#define MC_CMD_ERR_EBUSY 0x10 +/* enum: No such device */ +#define MC_CMD_ERR_ENODEV 0x13 +/* enum: Invalid argument to target */ +#define MC_CMD_ERR_EINVAL 0x16 +/* enum: No space */ +#define MC_CMD_ERR_ENOSPC 0x1c +/* enum: Read-only */ +#define MC_CMD_ERR_EROFS 0x1e +/* enum: Broken pipe */ +#define MC_CMD_ERR_EPIPE 0x20 +/* enum: Out of range */ +#define MC_CMD_ERR_ERANGE 0x22 +/* enum: Non-recursive resource is already acquired */ +#define MC_CMD_ERR_EDEADLK 0x23 +/* enum: Operation not implemented */ +#define MC_CMD_ERR_ENOSYS 0x26 +/* enum: Operation timed out */ +#define MC_CMD_ERR_ETIME 0x3e +/* enum: Link has been severed */ +#define MC_CMD_ERR_ENOLINK 0x43 +/* enum: Protocol error */ +#define MC_CMD_ERR_EPROTO 0x47 +/* enum: Bad message */ +#define MC_CMD_ERR_EBADMSG 0x4a +/* enum: Operation not supported */ +#define MC_CMD_ERR_ENOTSUP 0x5f +/* enum: Address not available */ +#define MC_CMD_ERR_EADDRNOTAVAIL 0x63 +/* enum: Not connected */ +#define MC_CMD_ERR_ENOTCONN 0x6b +/* enum: Operation already in progress */ +#define MC_CMD_ERR_EALREADY 0x72 +/* enum: Stale handle. The handle references a resource that no longer exists. + */ +#define MC_CMD_ERR_ESTALE 0x74 +/* enum: Resource allocation failed. */ +#define MC_CMD_ERR_ALLOC_FAIL 0x1000 +/* enum: V-adaptor not found. */ +#define MC_CMD_ERR_NO_VADAPTOR 0x1001 +/* enum: EVB port not found. */ +#define MC_CMD_ERR_NO_EVB_PORT 0x1002 +/* enum: V-switch not found. */ +#define MC_CMD_ERR_NO_VSWITCH 0x1003 +/* enum: Too many VLAN tags. */ +#define MC_CMD_ERR_VLAN_LIMIT 0x1004 +/* enum: Bad PCI function number. */ +#define MC_CMD_ERR_BAD_PCI_FUNC 0x1005 +/* enum: Invalid VLAN mode. */ +#define MC_CMD_ERR_BAD_VLAN_MODE 0x1006 +/* enum: Invalid v-switch type. */ +#define MC_CMD_ERR_BAD_VSWITCH_TYPE 0x1007 +/* enum: Invalid v-port type. */ +#define MC_CMD_ERR_BAD_VPORT_TYPE 0x1008 +/* enum: MAC address exists. */ +#define MC_CMD_ERR_MAC_EXIST 0x1009 +/* enum: Slave core not present */ +#define MC_CMD_ERR_SLAVE_NOT_PRESENT 0x100a +/* enum: The datapath is disabled. */ +#define MC_CMD_ERR_DATAPATH_DISABLED 0x100b +/* enum: The requesting client is not a function */ +#define MC_CMD_ERR_CLIENT_NOT_FN 0x100c +/* enum: The requested operation might require the command to be passed between + * MCs, and thetransport doesn't support that. Should only ever been seen over + * the UART. + */ +#define MC_CMD_ERR_TRANSPORT_NOPROXY 0x100d +/* enum: VLAN tag(s) exists */ +#define MC_CMD_ERR_VLAN_EXIST 0x100e +/* enum: No MAC address assigned to an EVB port */ +#define MC_CMD_ERR_NO_MAC_ADDR 0x100f +/* enum: Notifies the driver that the request has been relayed to an admin + * function for authorization. The driver should wait for a PROXY_RESPONSE + * event and then resend its request. This error code is followed by a 32-bit + * handle that helps matching it with the respective PROXY_RESPONSE event. + */ +#define MC_CMD_ERR_PROXY_PENDING 0x1010 +/* enum: The request cannot be passed for authorization because another request + * from the same function is currently being authorized. The drvier should try + * again later. + */ +#define MC_CMD_ERR_PROXY_INPROGRESS 0x1011 +/* enum: Returned by MC_CMD_PROXY_COMPLETE if the caller is not the function + * that has enabled proxying or BLOCK_INDEX points to a function that doesn't + * await an authorization. + */ +#define MC_CMD_ERR_PROXY_UNEXPECTED 0x1012 +/* enum: This code is currently only used internally in FW. Its meaning is that + * an operation failed due to lack of SR-IOV privilege. Normally it is + * translated to EPERM by send_cmd_err(), but it may also be used to trigger + * some special mechanism for handling such case, e.g. to relay the failed + * request to a designated admin function for authorization. + */ +#define MC_CMD_ERR_NO_PRIVILEGE 0x1013 +/* enum: Workaround 26807 could not be turned on/off because some functions + * have already installed filters. See the comment at + * MC_CMD_WORKAROUND_BUG26807. May also returned for other operations such as + * sub-variant switching. + */ +#define MC_CMD_ERR_FILTERS_PRESENT 0x1014 +/* enum: The clock whose frequency you've attempted to set set doesn't exist on + * this NIC + */ +#define MC_CMD_ERR_NO_CLOCK 0x1015 +/* enum: Returned by MC_CMD_TESTASSERT if the action that should have caused an + * assertion failed to do so. + */ +#define MC_CMD_ERR_UNREACHABLE 0x1016 +/* enum: This command needs to be processed in the background but there were no + * resources to do so. Send it again after a command has completed. + */ +#define MC_CMD_ERR_QUEUE_FULL 0x1017 +/* enum: The operation could not be completed because the PCIe link has gone + * away. This error code is never expected to be returned over the TLP + * transport. + */ +#define MC_CMD_ERR_NO_PCIE 0x1018 +/* enum: The operation could not be completed because the datapath has gone + * away. This is distinct from MC_CMD_ERR_DATAPATH_DISABLED in that the + * datapath absence may be temporary + */ +#define MC_CMD_ERR_NO_DATAPATH 0x1019 +/* enum: The operation could not complete because some VIs are allocated */ +#define MC_CMD_ERR_VIS_PRESENT 0x101a +/* enum: The operation could not complete because some PIO buffers are + * allocated + */ +#define MC_CMD_ERR_PIOBUFS_PRESENT 0x101b + +/* MCDI_EVENT structuredef: The structure of an MCDI_EVENT on Siena/EF10 + * platforms + */ #define MCDI_EVENT_LEN 8 #define MCDI_EVENT_CONT_LBN 32 #define MCDI_EVENT_CONT_WIDTH 1 @@ -596,6 +622,22 @@ #define MCDI_EVENT_SUC_ERR_ADDRESS_WIDTH 24 #define MCDI_EVENT_SUC_ERR_DATA_LBN 8 #define MCDI_EVENT_SUC_ERR_DATA_WIDTH 24 +#define MCDI_EVENT_LINKCHANGE_V2_LP_CAP_LBN 0 +#define MCDI_EVENT_LINKCHANGE_V2_LP_CAP_WIDTH 24 +#define MCDI_EVENT_LINKCHANGE_V2_SPEED_LBN 24 +#define MCDI_EVENT_LINKCHANGE_V2_SPEED_WIDTH 4 +/* Enum values, see field(s): */ +/* MCDI_EVENT/LINKCHANGE_SPEED */ +#define MCDI_EVENT_LINKCHANGE_V2_FLAGS_LINK_UP_LBN 28 +#define MCDI_EVENT_LINKCHANGE_V2_FLAGS_LINK_UP_WIDTH 1 +#define MCDI_EVENT_LINKCHANGE_V2_FCNTL_LBN 29 +#define MCDI_EVENT_LINKCHANGE_V2_FCNTL_WIDTH 3 +/* Enum values, see field(s): */ +/* MC_CMD_SET_MAC/MC_CMD_SET_MAC_IN/FCNTL */ +#define MCDI_EVENT_MODULECHANGE_LD_CAP_LBN 0 +#define MCDI_EVENT_MODULECHANGE_LD_CAP_WIDTH 30 +#define MCDI_EVENT_MODULECHANGE_SEQ_LBN 30 +#define MCDI_EVENT_MODULECHANGE_SEQ_WIDTH 2 #define MCDI_EVENT_DATA_LBN 0 #define MCDI_EVENT_DATA_WIDTH 32 #define MCDI_EVENT_SRC_LBN 36 @@ -674,6 +716,15 @@ #define MCDI_EVENT_CODE_DBRET 0x1e /* enum: The MC has detected a fault on the SUC */ #define MCDI_EVENT_CODE_SUC 0x1f +/* enum: Link change. This event is sent instead of LINKCHANGE if + * WANT_V2_LINKCHANGES was set on driver attach. + */ +#define MCDI_EVENT_CODE_LINKCHANGE_V2 0x20 +/* enum: This event is sent if WANT_V2_LINKCHANGES was set on driver attach + * when the local device capabilities changes. This will usually correspond to + * a module change. + */ +#define MCDI_EVENT_CODE_MODULECHANGE 0x21 /* enum: Artificial event generated by host and posted via MC for test * purposes. */ @@ -799,6 +850,14 @@ #define MCDI_EVENT_DBRET_DATA_LEN 4 #define MCDI_EVENT_DBRET_DATA_LBN 0 #define MCDI_EVENT_DBRET_DATA_WIDTH 32 +#define MCDI_EVENT_LINKCHANGE_V2_DATA_OFST 0 +#define MCDI_EVENT_LINKCHANGE_V2_DATA_LEN 4 +#define MCDI_EVENT_LINKCHANGE_V2_DATA_LBN 0 +#define MCDI_EVENT_LINKCHANGE_V2_DATA_WIDTH 32 +#define MCDI_EVENT_MODULECHANGE_DATA_OFST 0 +#define MCDI_EVENT_MODULECHANGE_DATA_LEN 4 +#define MCDI_EVENT_MODULECHANGE_DATA_LBN 0 +#define MCDI_EVENT_MODULECHANGE_DATA_WIDTH 32 /* FCDI_EVENT structuredef */ #define FCDI_EVENT_LEN 8 @@ -906,6 +965,7 @@ */ #define FCDI_EXTENDED_EVENT_PPS_LENMIN 16 #define FCDI_EXTENDED_EVENT_PPS_LENMAX 248 +#define FCDI_EXTENDED_EVENT_PPS_LENMAX_MCDI2 1016 #define FCDI_EXTENDED_EVENT_PPS_LEN(num) (8+8*(num)) /* Number of timestamps following */ #define FCDI_EXTENDED_EVENT_PPS_COUNT_OFST 0 @@ -929,6 +989,7 @@ #define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_HI_OFST 12 #define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MINNUM 1 #define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MAXNUM 30 +#define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_MAXNUM_MCDI2 126 #define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_LBN 64 #define FCDI_EXTENDED_EVENT_PPS_TIMESTAMPS_WIDTH 64 @@ -1044,11 +1105,13 @@ /* MC_CMD_READ32_OUT msgresponse */ #define MC_CMD_READ32_OUT_LENMIN 4 #define MC_CMD_READ32_OUT_LENMAX 252 +#define MC_CMD_READ32_OUT_LENMAX_MCDI2 1020 #define MC_CMD_READ32_OUT_LEN(num) (0+4*(num)) #define MC_CMD_READ32_OUT_BUFFER_OFST 0 #define MC_CMD_READ32_OUT_BUFFER_LEN 4 #define MC_CMD_READ32_OUT_BUFFER_MINNUM 1 #define MC_CMD_READ32_OUT_BUFFER_MAXNUM 63 +#define MC_CMD_READ32_OUT_BUFFER_MAXNUM_MCDI2 255 /***********************************/ @@ -1063,6 +1126,7 @@ /* MC_CMD_WRITE32_IN msgrequest */ #define MC_CMD_WRITE32_IN_LENMIN 8 #define MC_CMD_WRITE32_IN_LENMAX 252 +#define MC_CMD_WRITE32_IN_LENMAX_MCDI2 1020 #define MC_CMD_WRITE32_IN_LEN(num) (4+4*(num)) #define MC_CMD_WRITE32_IN_ADDR_OFST 0 #define MC_CMD_WRITE32_IN_ADDR_LEN 4 @@ -1070,6 +1134,7 @@ #define MC_CMD_WRITE32_IN_BUFFER_LEN 4 #define MC_CMD_WRITE32_IN_BUFFER_MINNUM 1 #define MC_CMD_WRITE32_IN_BUFFER_MAXNUM 62 +#define MC_CMD_WRITE32_IN_BUFFER_MAXNUM_MCDI2 254 /* MC_CMD_WRITE32_OUT msgresponse */ #define MC_CMD_WRITE32_OUT_LEN 0 @@ -1457,6 +1522,7 @@ /* MC_CMD_PTP_IN_TRANSMIT msgrequest */ #define MC_CMD_PTP_IN_TRANSMIT_LENMIN 13 #define MC_CMD_PTP_IN_TRANSMIT_LENMAX 252 +#define MC_CMD_PTP_IN_TRANSMIT_LENMAX_MCDI2 1020 #define MC_CMD_PTP_IN_TRANSMIT_LEN(num) (12+1*(num)) /* MC_CMD_PTP_IN_CMD_OFST 0 */ /* MC_CMD_PTP_IN_CMD_LEN 4 */ @@ -1470,6 +1536,7 @@ #define MC_CMD_PTP_IN_TRANSMIT_PACKET_LEN 1 #define MC_CMD_PTP_IN_TRANSMIT_PACKET_MINNUM 1 #define MC_CMD_PTP_IN_TRANSMIT_PACKET_MAXNUM 240 +#define MC_CMD_PTP_IN_TRANSMIT_PACKET_MAXNUM_MCDI2 1008 /* MC_CMD_PTP_IN_READ_NIC_TIME msgrequest */ #define MC_CMD_PTP_IN_READ_NIC_TIME_LEN 8 @@ -1622,6 +1689,7 @@ /* MC_CMD_PTP_IN_FPGAWRITE msgrequest */ #define MC_CMD_PTP_IN_FPGAWRITE_LENMIN 13 #define MC_CMD_PTP_IN_FPGAWRITE_LENMAX 252 +#define MC_CMD_PTP_IN_FPGAWRITE_LENMAX_MCDI2 1020 #define MC_CMD_PTP_IN_FPGAWRITE_LEN(num) (12+1*(num)) /* MC_CMD_PTP_IN_CMD_OFST 0 */ /* MC_CMD_PTP_IN_CMD_LEN 4 */ @@ -1633,6 +1701,7 @@ #define MC_CMD_PTP_IN_FPGAWRITE_BUFFER_LEN 1 #define MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MINNUM 1 #define MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MAXNUM 240 +#define MC_CMD_PTP_IN_FPGAWRITE_BUFFER_MAXNUM_MCDI2 1008 /* MC_CMD_PTP_IN_CLOCK_OFFSET_ADJUST msgrequest */ #define MC_CMD_PTP_IN_CLOCK_OFFSET_ADJUST_LEN 16 @@ -1963,12 +2032,14 @@ /* MC_CMD_PTP_OUT_SYNCHRONIZE msgresponse */ #define MC_CMD_PTP_OUT_SYNCHRONIZE_LENMIN 20 #define MC_CMD_PTP_OUT_SYNCHRONIZE_LENMAX 240 +#define MC_CMD_PTP_OUT_SYNCHRONIZE_LENMAX_MCDI2 1020 #define MC_CMD_PTP_OUT_SYNCHRONIZE_LEN(num) (0+20*(num)) /* A set of host and NIC times */ #define MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_OFST 0 #define MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_LEN 20 #define MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MINNUM 1 #define MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MAXNUM 12 +#define MC_CMD_PTP_OUT_SYNCHRONIZE_TIMESET_MAXNUM_MCDI2 51 /* Host time immediately before NIC's hardware clock read */ #define MC_CMD_PTP_OUT_SYNCHRONIZE_HOSTSTART_OFST 0 #define MC_CMD_PTP_OUT_SYNCHRONIZE_HOSTSTART_LEN 4 @@ -2045,11 +2116,13 @@ /* MC_CMD_PTP_OUT_FPGAREAD msgresponse */ #define MC_CMD_PTP_OUT_FPGAREAD_LENMIN 1 #define MC_CMD_PTP_OUT_FPGAREAD_LENMAX 252 +#define MC_CMD_PTP_OUT_FPGAREAD_LENMAX_MCDI2 1020 #define MC_CMD_PTP_OUT_FPGAREAD_LEN(num) (0+1*(num)) #define MC_CMD_PTP_OUT_FPGAREAD_BUFFER_OFST 0 #define MC_CMD_PTP_OUT_FPGAREAD_BUFFER_LEN 1 #define MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MINNUM 1 #define MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MAXNUM 252 +#define MC_CMD_PTP_OUT_FPGAREAD_BUFFER_MAXNUM_MCDI2 1020 /* MC_CMD_PTP_OUT_GET_TIME_FORMAT msgresponse */ #define MC_CMD_PTP_OUT_GET_TIME_FORMAT_LEN 4 @@ -2183,12 +2256,14 @@ /* MC_CMD_CSR_READ32_OUT msgresponse */ #define MC_CMD_CSR_READ32_OUT_LENMIN 4 #define MC_CMD_CSR_READ32_OUT_LENMAX 252 +#define MC_CMD_CSR_READ32_OUT_LENMAX_MCDI2 1020 #define MC_CMD_CSR_READ32_OUT_LEN(num) (0+4*(num)) /* The last dword is the status, not a value read */ #define MC_CMD_CSR_READ32_OUT_BUFFER_OFST 0 #define MC_CMD_CSR_READ32_OUT_BUFFER_LEN 4 #define MC_CMD_CSR_READ32_OUT_BUFFER_MINNUM 1 #define MC_CMD_CSR_READ32_OUT_BUFFER_MAXNUM 63 +#define MC_CMD_CSR_READ32_OUT_BUFFER_MAXNUM_MCDI2 255 /***********************************/ @@ -2203,6 +2278,7 @@ /* MC_CMD_CSR_WRITE32_IN msgrequest */ #define MC_CMD_CSR_WRITE32_IN_LENMIN 12 #define MC_CMD_CSR_WRITE32_IN_LENMAX 252 +#define MC_CMD_CSR_WRITE32_IN_LENMAX_MCDI2 1020 #define MC_CMD_CSR_WRITE32_IN_LEN(num) (8+4*(num)) /* Address */ #define MC_CMD_CSR_WRITE32_IN_ADDR_OFST 0 @@ -2213,6 +2289,7 @@ #define MC_CMD_CSR_WRITE32_IN_BUFFER_LEN 4 #define MC_CMD_CSR_WRITE32_IN_BUFFER_MINNUM 1 #define MC_CMD_CSR_WRITE32_IN_BUFFER_MAXNUM 61 +#define MC_CMD_CSR_WRITE32_IN_BUFFER_MAXNUM_MCDI2 253 /* MC_CMD_CSR_WRITE32_OUT msgresponse */ #define MC_CMD_CSR_WRITE32_OUT_LEN 4 @@ -2283,12 +2360,14 @@ /* MC_CMD_STACKINFO_OUT msgresponse */ #define MC_CMD_STACKINFO_OUT_LENMIN 12 #define MC_CMD_STACKINFO_OUT_LENMAX 252 +#define MC_CMD_STACKINFO_OUT_LENMAX_MCDI2 1020 #define MC_CMD_STACKINFO_OUT_LEN(num) (0+12*(num)) /* (thread ptr, stack size, free space) for each thread in system */ #define MC_CMD_STACKINFO_OUT_THREAD_INFO_OFST 0 #define MC_CMD_STACKINFO_OUT_THREAD_INFO_LEN 12 #define MC_CMD_STACKINFO_OUT_THREAD_INFO_MINNUM 1 #define MC_CMD_STACKINFO_OUT_THREAD_INFO_MAXNUM 21 +#define MC_CMD_STACKINFO_OUT_THREAD_INFO_MAXNUM_MCDI2 85 /***********************************/ @@ -2399,6 +2478,7 @@ /* MC_CMD_DBI_WRITE_IN msgrequest */ #define MC_CMD_DBI_WRITE_IN_LENMIN 12 #define MC_CMD_DBI_WRITE_IN_LENMAX 252 +#define MC_CMD_DBI_WRITE_IN_LENMAX_MCDI2 1020 #define MC_CMD_DBI_WRITE_IN_LEN(num) (0+12*(num)) /* Each write op consists of an address (offset 0), byte enable/VF/CS2 (offset * 32) and value (offset 64). See MC_CMD_DBIWROP_TYPEDEF. @@ -2407,6 +2487,7 @@ #define MC_CMD_DBI_WRITE_IN_DBIWROP_LEN 12 #define MC_CMD_DBI_WRITE_IN_DBIWROP_MINNUM 1 #define MC_CMD_DBI_WRITE_IN_DBIWROP_MAXNUM 21 +#define MC_CMD_DBI_WRITE_IN_DBIWROP_MAXNUM_MCDI2 85 /* MC_CMD_DBI_WRITE_OUT msgresponse */ #define MC_CMD_DBI_WRITE_OUT_LEN 0 @@ -2566,6 +2647,7 @@ /* MC_CMD_GET_BOARD_CFG_OUT msgresponse */ #define MC_CMD_GET_BOARD_CFG_OUT_LENMIN 96 #define MC_CMD_GET_BOARD_CFG_OUT_LENMAX 136 +#define MC_CMD_GET_BOARD_CFG_OUT_LENMAX_MCDI2 136 #define MC_CMD_GET_BOARD_CFG_OUT_LEN(num) (72+2*(num)) #define MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_OFST 0 #define MC_CMD_GET_BOARD_CFG_OUT_BOARD_TYPE_LEN 4 @@ -2621,6 +2703,7 @@ #define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_LEN 2 #define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MINNUM 12 #define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MAXNUM 32 +#define MC_CMD_GET_BOARD_CFG_OUT_FW_SUBTYPE_LIST_MAXNUM_MCDI2 32 /***********************************/ @@ -2635,6 +2718,7 @@ /* MC_CMD_DBI_READX_IN msgrequest */ #define MC_CMD_DBI_READX_IN_LENMIN 8 #define MC_CMD_DBI_READX_IN_LENMAX 248 +#define MC_CMD_DBI_READX_IN_LENMAX_MCDI2 1016 #define MC_CMD_DBI_READX_IN_LEN(num) (0+8*(num)) /* Each Read op consists of an address (offset 0), VF/CS2) */ #define MC_CMD_DBI_READX_IN_DBIRDOP_OFST 0 @@ -2643,16 +2727,19 @@ #define MC_CMD_DBI_READX_IN_DBIRDOP_HI_OFST 4 #define MC_CMD_DBI_READX_IN_DBIRDOP_MINNUM 1 #define MC_CMD_DBI_READX_IN_DBIRDOP_MAXNUM 31 +#define MC_CMD_DBI_READX_IN_DBIRDOP_MAXNUM_MCDI2 127 /* MC_CMD_DBI_READX_OUT msgresponse */ #define MC_CMD_DBI_READX_OUT_LENMIN 4 #define MC_CMD_DBI_READX_OUT_LENMAX 252 +#define MC_CMD_DBI_READX_OUT_LENMAX_MCDI2 1020 #define MC_CMD_DBI_READX_OUT_LEN(num) (0+4*(num)) /* Value */ #define MC_CMD_DBI_READX_OUT_VALUE_OFST 0 #define MC_CMD_DBI_READX_OUT_VALUE_LEN 4 #define MC_CMD_DBI_READX_OUT_VALUE_MINNUM 1 #define MC_CMD_DBI_READX_OUT_VALUE_MAXNUM 63 +#define MC_CMD_DBI_READX_OUT_VALUE_MAXNUM_MCDI2 255 /* MC_CMD_DBIRDOP_TYPEDEF structuredef */ #define MC_CMD_DBIRDOP_TYPEDEF_LEN 8 @@ -2703,12 +2790,14 @@ /* MC_CMD_LTSSM_HIST_OUT msgresponse */ #define MC_CMD_LTSSM_HIST_OUT_LENMIN 0 #define MC_CMD_LTSSM_HIST_OUT_LENMAX 252 +#define MC_CMD_LTSSM_HIST_OUT_LENMAX_MCDI2 1020 #define MC_CMD_LTSSM_HIST_OUT_LEN(num) (0+4*(num)) /* variable number of LTSSM values, as bytes. The history is read-to-clear. */ #define MC_CMD_LTSSM_HIST_OUT_DATA_OFST 0 #define MC_CMD_LTSSM_HIST_OUT_DATA_LEN 4 #define MC_CMD_LTSSM_HIST_OUT_DATA_MINNUM 0 #define MC_CMD_LTSSM_HIST_OUT_DATA_MAXNUM 63 +#define MC_CMD_LTSSM_HIST_OUT_DATA_MAXNUM_MCDI2 255 /***********************************/ @@ -2742,6 +2831,10 @@ #define MC_CMD_DRV_ATTACH_IN_SUBVARIANT_AWARE_WIDTH 1 #define MC_CMD_DRV_ATTACH_IN_WANT_VI_SPREADING_LBN 3 #define MC_CMD_DRV_ATTACH_IN_WANT_VI_SPREADING_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_WANT_V2_LINKCHANGES_LBN 4 +#define MC_CMD_DRV_ATTACH_IN_WANT_V2_LINKCHANGES_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_WANT_RX_VI_SPREADING_INHIBIT_LBN 5 +#define MC_CMD_DRV_ATTACH_IN_WANT_RX_VI_SPREADING_INHIBIT_WIDTH 1 /* 1 to set new state, or 0 to just report the existing state */ #define MC_CMD_DRV_ATTACH_IN_UPDATE_OFST 4 #define MC_CMD_DRV_ATTACH_IN_UPDATE_LEN 4 @@ -2779,6 +2872,71 @@ /* enum: Only this option is allowed for non-admin functions */ #define MC_CMD_FW_DONT_CARE 0xffffffff +/* MC_CMD_DRV_ATTACH_IN_V2 msgrequest: Updated DRV_ATTACH to include driver + * version + */ +#define MC_CMD_DRV_ATTACH_IN_V2_LEN 32 +/* new state to set if UPDATE=1 */ +#define MC_CMD_DRV_ATTACH_IN_V2_NEW_STATE_OFST 0 +#define MC_CMD_DRV_ATTACH_IN_V2_NEW_STATE_LEN 4 +/* MC_CMD_DRV_ATTACH_LBN 0 */ +/* MC_CMD_DRV_ATTACH_WIDTH 1 */ +#define MC_CMD_DRV_ATTACH_IN_V2_ATTACH_LBN 0 +#define MC_CMD_DRV_ATTACH_IN_V2_ATTACH_WIDTH 1 +/* MC_CMD_DRV_PREBOOT_LBN 1 */ +/* MC_CMD_DRV_PREBOOT_WIDTH 1 */ +#define MC_CMD_DRV_ATTACH_IN_V2_PREBOOT_LBN 1 +#define MC_CMD_DRV_ATTACH_IN_V2_PREBOOT_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_V2_SUBVARIANT_AWARE_LBN 2 +#define MC_CMD_DRV_ATTACH_IN_V2_SUBVARIANT_AWARE_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_VI_SPREADING_LBN 3 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_VI_SPREADING_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_V2_LINKCHANGES_LBN 4 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_V2_LINKCHANGES_WIDTH 1 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_RX_VI_SPREADING_INHIBIT_LBN 5 +#define MC_CMD_DRV_ATTACH_IN_V2_WANT_RX_VI_SPREADING_INHIBIT_WIDTH 1 +/* 1 to set new state, or 0 to just report the existing state */ +#define MC_CMD_DRV_ATTACH_IN_V2_UPDATE_OFST 4 +#define MC_CMD_DRV_ATTACH_IN_V2_UPDATE_LEN 4 +/* preferred datapath firmware (for Huntington; ignored for Siena) */ +#define MC_CMD_DRV_ATTACH_IN_V2_FIRMWARE_ID_OFST 8 +#define MC_CMD_DRV_ATTACH_IN_V2_FIRMWARE_ID_LEN 4 +/* enum: Prefer to use full featured firmware */ +/* MC_CMD_FW_FULL_FEATURED 0x0 */ +/* enum: Prefer to use firmware with fewer features but lower latency */ +/* MC_CMD_FW_LOW_LATENCY 0x1 */ +/* enum: Prefer to use firmware for SolarCapture packed stream mode */ +/* MC_CMD_FW_PACKED_STREAM 0x2 */ +/* enum: Prefer to use firmware with fewer features and simpler TX event + * batching but higher TX packet rate + */ +/* MC_CMD_FW_HIGH_TX_RATE 0x3 */ +/* enum: Reserved value */ +/* MC_CMD_FW_PACKED_STREAM_HASH_MODE_1 0x4 */ +/* enum: Prefer to use firmware with additional "rules engine" filtering + * support + */ +/* MC_CMD_FW_RULES_ENGINE 0x5 */ +/* enum: Prefer to use firmware with additional DPDK support */ +/* MC_CMD_FW_DPDK 0x6 */ +/* enum: Prefer to use "l3xudp" custom datapath firmware (see SF-119495-PD and + * bug69716) + */ +/* MC_CMD_FW_L3XUDP 0x7 */ +/* enum: Requests that the MC keep whatever datapath firmware is currently + * running. It's used for test purposes, where we want to be able to shmboot + * special test firmware variants. This option is only recognised in eftest + * (i.e. non-production) builds. + */ +/* MC_CMD_FW_KEEP_CURRENT_EFTEST_ONLY 0xfffffffe */ +/* enum: Only this option is allowed for non-admin functions */ +/* MC_CMD_FW_DONT_CARE 0xffffffff */ +/* Version of the driver to be reported by management protocols (e.g. NC-SI) + * handled by the NIC. This is a zero-terminated ASCII string. + */ +#define MC_CMD_DRV_ATTACH_IN_V2_DRIVER_VERSION_OFST 12 +#define MC_CMD_DRV_ATTACH_IN_V2_DRIVER_VERSION_LEN 20 + /* MC_CMD_DRV_ATTACH_OUT msgresponse */ #define MC_CMD_DRV_ATTACH_OUT_LEN 4 /* previous or existing state, see the bitmask at NEW_STATE */ @@ -2810,6 +2968,11 @@ * input. */ #define MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_VI_SPREADING_ENABLED 0x4 +/* enum: If set, indicates that VI spreading is inhibited on RX. See + * description of WANT_RX_VI_SPREADING_INHIBIT above. It is an error to set + * this flag without also setting FLAG_VI_SPREADING_ENABLED. + */ +#define MC_CMD_DRV_ATTACH_EXT_OUT_FLAG_RX_VI_SPREADING_INHIBITED 0x5 /***********************************/ @@ -2975,6 +3138,7 @@ /* MC_CMD_PUTS_IN msgrequest */ #define MC_CMD_PUTS_IN_LENMIN 13 #define MC_CMD_PUTS_IN_LENMAX 252 +#define MC_CMD_PUTS_IN_LENMAX_MCDI2 1020 #define MC_CMD_PUTS_IN_LEN(num) (12+1*(num)) #define MC_CMD_PUTS_IN_DEST_OFST 0 #define MC_CMD_PUTS_IN_DEST_LEN 4 @@ -2988,6 +3152,7 @@ #define MC_CMD_PUTS_IN_STRING_LEN 1 #define MC_CMD_PUTS_IN_STRING_MINNUM 1 #define MC_CMD_PUTS_IN_STRING_MAXNUM 240 +#define MC_CMD_PUTS_IN_STRING_MAXNUM_MCDI2 1008 /* MC_CMD_PUTS_OUT msgresponse */ #define MC_CMD_PUTS_OUT_LEN 0 @@ -3340,11 +3505,13 @@ /* MC_CMD_FLUSH_RX_QUEUES_IN msgrequest */ #define MC_CMD_FLUSH_RX_QUEUES_IN_LENMIN 4 #define MC_CMD_FLUSH_RX_QUEUES_IN_LENMAX 252 +#define MC_CMD_FLUSH_RX_QUEUES_IN_LENMAX_MCDI2 1020 #define MC_CMD_FLUSH_RX_QUEUES_IN_LEN(num) (0+4*(num)) #define MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_OFST 0 #define MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_LEN 4 #define MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MINNUM 1 #define MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MAXNUM 63 +#define MC_CMD_FLUSH_RX_QUEUES_IN_QID_OFST_MAXNUM_MCDI2 255 /* MC_CMD_FLUSH_RX_QUEUES_OUT msgresponse */ #define MC_CMD_FLUSH_RX_QUEUES_OUT_LEN 0 @@ -3694,6 +3861,10 @@ #define MC_CMD_GET_LINK_OUT_LINK_FAULT_RX_WIDTH 1 #define MC_CMD_GET_LINK_OUT_LINK_FAULT_TX_LBN 7 #define MC_CMD_GET_LINK_OUT_LINK_FAULT_TX_WIDTH 1 +#define MC_CMD_GET_LINK_OUT_MODULE_UP_VALID_LBN 8 +#define MC_CMD_GET_LINK_OUT_MODULE_UP_VALID_WIDTH 1 +#define MC_CMD_GET_LINK_OUT_MODULE_UP_LBN 9 +#define MC_CMD_GET_LINK_OUT_MODULE_UP_WIDTH 1 /* This returns the negotiated flow control value. */ #define MC_CMD_GET_LINK_OUT_FCNTL_OFST 20 #define MC_CMD_GET_LINK_OUT_FCNTL_LEN 4 @@ -3746,6 +3917,10 @@ #define MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_RX_WIDTH 1 #define MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_TX_LBN 7 #define MC_CMD_GET_LINK_OUT_V2_LINK_FAULT_TX_WIDTH 1 +#define MC_CMD_GET_LINK_OUT_V2_MODULE_UP_VALID_LBN 8 +#define MC_CMD_GET_LINK_OUT_V2_MODULE_UP_VALID_WIDTH 1 +#define MC_CMD_GET_LINK_OUT_V2_MODULE_UP_LBN 9 +#define MC_CMD_GET_LINK_OUT_V2_MODULE_UP_WIDTH 1 /* This returns the negotiated flow control value. */ #define MC_CMD_GET_LINK_OUT_V2_FCNTL_OFST 20 #define MC_CMD_GET_LINK_OUT_V2_FCNTL_LEN 4 @@ -3805,7 +3980,7 @@ /***********************************/ /* MC_CMD_SET_LINK * Write the unified MAC/PHY link configuration. Locks required: None. Return - * code: 0, EINVAL, ETIME + * code: 0, EINVAL, ETIME, EAGAIN */ #define MC_CMD_SET_LINK 0x2a #undef MC_CMD_0x2a_PRIVILEGE_CTG @@ -3839,6 +4014,42 @@ #define MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_OFST 12 #define MC_CMD_SET_LINK_IN_LOOPBACK_SPEED_LEN 4 +/* MC_CMD_SET_LINK_IN_V2 msgrequest: Updated SET_LINK to include sequence + * number to ensure this SET_LINK command corresponds to the latest + * MODULECHANGE event. + */ +#define MC_CMD_SET_LINK_IN_V2_LEN 17 +/* Near-side advertised capabilities. Refer to + * MC_CMD_GET_PHY_CFG_OUT/SUPPORTED_CAP for bit definitions. + */ +#define MC_CMD_SET_LINK_IN_V2_CAP_OFST 0 +#define MC_CMD_SET_LINK_IN_V2_CAP_LEN 4 +/* Flags */ +#define MC_CMD_SET_LINK_IN_V2_FLAGS_OFST 4 +#define MC_CMD_SET_LINK_IN_V2_FLAGS_LEN 4 +#define MC_CMD_SET_LINK_IN_V2_LOWPOWER_LBN 0 +#define MC_CMD_SET_LINK_IN_V2_LOWPOWER_WIDTH 1 +#define MC_CMD_SET_LINK_IN_V2_POWEROFF_LBN 1 +#define MC_CMD_SET_LINK_IN_V2_POWEROFF_WIDTH 1 +#define MC_CMD_SET_LINK_IN_V2_TXDIS_LBN 2 +#define MC_CMD_SET_LINK_IN_V2_TXDIS_WIDTH 1 +/* Loopback mode. */ +#define MC_CMD_SET_LINK_IN_V2_LOOPBACK_MODE_OFST 8 +#define MC_CMD_SET_LINK_IN_V2_LOOPBACK_MODE_LEN 4 +/* Enum values, see field(s): */ +/* MC_CMD_GET_LOOPBACK_MODES/MC_CMD_GET_LOOPBACK_MODES_OUT/100M */ +/* A loopback speed of "0" is supported, and means (choose any available + * speed). + */ +#define MC_CMD_SET_LINK_IN_V2_LOOPBACK_SPEED_OFST 12 +#define MC_CMD_SET_LINK_IN_V2_LOOPBACK_SPEED_LEN 4 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_OFST 16 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_LEN 1 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_NUMBER_LBN 0 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_NUMBER_WIDTH 7 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_IGNORE_LBN 7 +#define MC_CMD_SET_LINK_IN_V2_MODULE_SEQ_IGNORE_WIDTH 1 + /* MC_CMD_SET_LINK_OUT msgresponse */ #define MC_CMD_SET_LINK_OUT_LEN 0 @@ -4486,12 +4697,14 @@ /* MC_CMD_MEMCPY_IN msgrequest */ #define MC_CMD_MEMCPY_IN_LENMIN 32 #define MC_CMD_MEMCPY_IN_LENMAX 224 +#define MC_CMD_MEMCPY_IN_LENMAX_MCDI2 992 #define MC_CMD_MEMCPY_IN_LEN(num) (0+32*(num)) /* see MC_CMD_MEMCPY_RECORD_TYPEDEF */ #define MC_CMD_MEMCPY_IN_RECORD_OFST 0 #define MC_CMD_MEMCPY_IN_RECORD_LEN 32 #define MC_CMD_MEMCPY_IN_RECORD_MINNUM 1 #define MC_CMD_MEMCPY_IN_RECORD_MAXNUM 7 +#define MC_CMD_MEMCPY_IN_RECORD_MAXNUM_MCDI2 31 /* MC_CMD_MEMCPY_OUT msgresponse */ #define MC_CMD_MEMCPY_OUT_LEN 0 @@ -4763,6 +4976,8 @@ #define MC_CMD_NVRAM_INFO_OUT_TLV_WIDTH 1 #define MC_CMD_NVRAM_INFO_OUT_READ_ONLY_IF_TSA_BOUND_LBN 2 #define MC_CMD_NVRAM_INFO_OUT_READ_ONLY_IF_TSA_BOUND_WIDTH 1 +#define MC_CMD_NVRAM_INFO_OUT_CRC_LBN 3 +#define MC_CMD_NVRAM_INFO_OUT_CRC_WIDTH 1 #define MC_CMD_NVRAM_INFO_OUT_READ_ONLY_LBN 5 #define MC_CMD_NVRAM_INFO_OUT_READ_ONLY_WIDTH 1 #define MC_CMD_NVRAM_INFO_OUT_CMAC_LBN 6 @@ -4910,11 +5125,13 @@ /* MC_CMD_NVRAM_READ_OUT msgresponse */ #define MC_CMD_NVRAM_READ_OUT_LENMIN 1 #define MC_CMD_NVRAM_READ_OUT_LENMAX 252 +#define MC_CMD_NVRAM_READ_OUT_LENMAX_MCDI2 1020 #define MC_CMD_NVRAM_READ_OUT_LEN(num) (0+1*(num)) #define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_OFST 0 #define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_LEN 1 #define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MINNUM 1 #define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MAXNUM 252 +#define MC_CMD_NVRAM_READ_OUT_READ_BUFFER_MAXNUM_MCDI2 1020 /***********************************/ @@ -4931,6 +5148,7 @@ /* MC_CMD_NVRAM_WRITE_IN msgrequest */ #define MC_CMD_NVRAM_WRITE_IN_LENMIN 13 #define MC_CMD_NVRAM_WRITE_IN_LENMAX 252 +#define MC_CMD_NVRAM_WRITE_IN_LENMAX_MCDI2 1020 #define MC_CMD_NVRAM_WRITE_IN_LEN(num) (12+1*(num)) #define MC_CMD_NVRAM_WRITE_IN_TYPE_OFST 0 #define MC_CMD_NVRAM_WRITE_IN_TYPE_LEN 4 @@ -4944,6 +5162,7 @@ #define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_LEN 1 #define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MINNUM 1 #define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MAXNUM 240 +#define MC_CMD_NVRAM_WRITE_IN_WRITE_BUFFER_MAXNUM_MCDI2 1008 /* MC_CMD_NVRAM_WRITE_OUT msgresponse */ #define MC_CMD_NVRAM_WRITE_OUT_LEN 0 @@ -5130,11 +5349,13 @@ /* MC_CMD_SCHEDINFO_OUT msgresponse */ #define MC_CMD_SCHEDINFO_OUT_LENMIN 4 #define MC_CMD_SCHEDINFO_OUT_LENMAX 252 +#define MC_CMD_SCHEDINFO_OUT_LENMAX_MCDI2 1020 #define MC_CMD_SCHEDINFO_OUT_LEN(num) (0+4*(num)) #define MC_CMD_SCHEDINFO_OUT_DATA_OFST 0 #define MC_CMD_SCHEDINFO_OUT_DATA_LEN 4 #define MC_CMD_SCHEDINFO_OUT_DATA_MINNUM 1 #define MC_CMD_SCHEDINFO_OUT_DATA_MAXNUM 63 +#define MC_CMD_SCHEDINFO_OUT_DATA_MAXNUM_MCDI2 255 /***********************************/ @@ -5218,9 +5439,26 @@ #define MC_CMD_SENSOR_INFO_EXT_IN_PAGE_OFST 0 #define MC_CMD_SENSOR_INFO_EXT_IN_PAGE_LEN 4 +/* MC_CMD_SENSOR_INFO_EXT_IN_V2 msgrequest */ +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_LEN 8 +/* Which page of sensors to report. + * + * Page 0 contains sensors 0 to 30 (sensor 31 is the next page bit). + * + * Page 1 contains sensors 32 to 62 (sensor 63 is the next page bit). etc. + */ +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_PAGE_OFST 0 +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_PAGE_LEN 4 +/* Flags controlling information retrieved */ +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_FLAGS_OFST 4 +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_FLAGS_LEN 4 +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_ENGINEERING_LBN 0 +#define MC_CMD_SENSOR_INFO_EXT_IN_V2_ENGINEERING_WIDTH 1 + /* MC_CMD_SENSOR_INFO_OUT msgresponse */ #define MC_CMD_SENSOR_INFO_OUT_LENMIN 4 #define MC_CMD_SENSOR_INFO_OUT_LENMAX 252 +#define MC_CMD_SENSOR_INFO_OUT_LENMAX_MCDI2 1020 #define MC_CMD_SENSOR_INFO_OUT_LEN(num) (4+8*(num)) #define MC_CMD_SENSOR_INFO_OUT_MASK_OFST 0 #define MC_CMD_SENSOR_INFO_OUT_MASK_LEN 4 @@ -5398,6 +5636,22 @@ #define MC_CMD_SENSOR_IN_1V3 0x55 /* enum: 1.3v power current: mA */ #define MC_CMD_SENSOR_IN_I1V3 0x56 +/* enum: Engineering sensor 1 */ +#define MC_CMD_SENSOR_ENGINEERING_1 0x57 +/* enum: Engineering sensor 2 */ +#define MC_CMD_SENSOR_ENGINEERING_2 0x58 +/* enum: Engineering sensor 3 */ +#define MC_CMD_SENSOR_ENGINEERING_3 0x59 +/* enum: Engineering sensor 4 */ +#define MC_CMD_SENSOR_ENGINEERING_4 0x5a +/* enum: Engineering sensor 5 */ +#define MC_CMD_SENSOR_ENGINEERING_5 0x5b +/* enum: Engineering sensor 6 */ +#define MC_CMD_SENSOR_ENGINEERING_6 0x5c +/* enum: Engineering sensor 7 */ +#define MC_CMD_SENSOR_ENGINEERING_7 0x5d +/* enum: Engineering sensor 8 */ +#define MC_CMD_SENSOR_ENGINEERING_8 0x5e /* enum: Not a sensor: reserved for the next page flag */ #define MC_CMD_SENSOR_PAGE2_NEXT 0x5f /* MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF */ @@ -5407,10 +5661,12 @@ #define MC_CMD_SENSOR_ENTRY_HI_OFST 8 #define MC_CMD_SENSOR_ENTRY_MINNUM 0 #define MC_CMD_SENSOR_ENTRY_MAXNUM 31 +#define MC_CMD_SENSOR_ENTRY_MAXNUM_MCDI2 127 /* MC_CMD_SENSOR_INFO_EXT_OUT msgresponse */ #define MC_CMD_SENSOR_INFO_EXT_OUT_LENMIN 4 #define MC_CMD_SENSOR_INFO_EXT_OUT_LENMAX 252 +#define MC_CMD_SENSOR_INFO_EXT_OUT_LENMAX_MCDI2 1020 #define MC_CMD_SENSOR_INFO_EXT_OUT_LEN(num) (4+8*(num)) #define MC_CMD_SENSOR_INFO_EXT_OUT_MASK_OFST 0 #define MC_CMD_SENSOR_INFO_EXT_OUT_MASK_LEN 4 @@ -5425,6 +5681,7 @@ /* MC_CMD_SENSOR_ENTRY_HI_OFST 8 */ /* MC_CMD_SENSOR_ENTRY_MINNUM 0 */ /* MC_CMD_SENSOR_ENTRY_MAXNUM 31 */ +/* MC_CMD_SENSOR_ENTRY_MAXNUM_MCDI2 127 */ /* MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF structuredef */ #define MC_CMD_SENSOR_INFO_ENTRY_TYPEDEF_LEN 8 @@ -5487,6 +5744,22 @@ #define MC_CMD_READ_SENSORS_EXT_IN_LENGTH_OFST 8 #define MC_CMD_READ_SENSORS_EXT_IN_LENGTH_LEN 4 +/* MC_CMD_READ_SENSORS_EXT_IN_V2 msgrequest */ +#define MC_CMD_READ_SENSORS_EXT_IN_V2_LEN 16 +/* DMA address of host buffer for sensor readings (must be 4Kbyte aligned). */ +#define MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_OFST 0 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_LEN 8 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_LO_OFST 0 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_DMA_ADDR_HI_OFST 4 +/* Size in bytes of host buffer. */ +#define MC_CMD_READ_SENSORS_EXT_IN_V2_LENGTH_OFST 8 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_LENGTH_LEN 4 +/* Flags controlling information retrieved */ +#define MC_CMD_READ_SENSORS_EXT_IN_V2_FLAGS_OFST 12 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_FLAGS_LEN 4 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_ENGINEERING_LBN 0 +#define MC_CMD_READ_SENSORS_EXT_IN_V2_ENGINEERING_WIDTH 1 + /* MC_CMD_READ_SENSORS_OUT msgresponse */ #define MC_CMD_READ_SENSORS_OUT_LEN 0 @@ -5594,6 +5867,7 @@ /* MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN msgrequest */ #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMIN 8 #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMAX 252 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LENMAX_MCDI2 1020 #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_LEN(num) (4+4*(num)) #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_OFST 0 #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_PROTOCOL_LEN 4 @@ -5603,6 +5877,7 @@ #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_LEN 4 #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MINNUM 1 #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MAXNUM 62 +#define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_DATA_MAXNUM_MCDI2 254 /* MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARP msgrequest */ #define MC_CMD_ADD_LIGHTSOUT_OFFLOAD_IN_ARP_LEN 14 @@ -5788,6 +6063,7 @@ /* MC_CMD_GET_PHY_MEDIA_INFO_OUT msgresponse */ #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMIN 5 #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX 252 +#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LENMAX_MCDI2 1020 #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_LEN(num) (4+1*(num)) /* in bytes */ #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATALEN_OFST 0 @@ -5796,6 +6072,7 @@ #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_LEN 1 #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MINNUM 1 #define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MAXNUM 248 +#define MC_CMD_GET_PHY_MEDIA_INFO_OUT_DATA_MAXNUM_MCDI2 1016 /***********************************/ @@ -5940,6 +6217,7 @@ /* MC_CMD_NVRAM_PARTITIONS_OUT msgresponse */ #define MC_CMD_NVRAM_PARTITIONS_OUT_LENMIN 4 #define MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX 252 +#define MC_CMD_NVRAM_PARTITIONS_OUT_LENMAX_MCDI2 1020 #define MC_CMD_NVRAM_PARTITIONS_OUT_LEN(num) (4+4*(num)) /* total number of partitions */ #define MC_CMD_NVRAM_PARTITIONS_OUT_NUM_PARTITIONS_OFST 0 @@ -5949,6 +6227,7 @@ #define MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_LEN 4 #define MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MINNUM 0 #define MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MAXNUM 62 +#define MC_CMD_NVRAM_PARTITIONS_OUT_TYPE_ID_MAXNUM_MCDI2 254 /***********************************/ @@ -5970,6 +6249,7 @@ /* MC_CMD_NVRAM_METADATA_OUT msgresponse */ #define MC_CMD_NVRAM_METADATA_OUT_LENMIN 20 #define MC_CMD_NVRAM_METADATA_OUT_LENMAX 252 +#define MC_CMD_NVRAM_METADATA_OUT_LENMAX_MCDI2 1020 #define MC_CMD_NVRAM_METADATA_OUT_LEN(num) (20+1*(num)) /* Partition type ID code */ #define MC_CMD_NVRAM_METADATA_OUT_TYPE_OFST 0 @@ -6002,6 +6282,7 @@ #define MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_LEN 1 #define MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MINNUM 0 #define MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MAXNUM 232 +#define MC_CMD_NVRAM_METADATA_OUT_DESCRIPTION_MAXNUM_MCDI2 1000 /***********************************/ @@ -6034,7 +6315,10 @@ /***********************************/ /* MC_CMD_CLP - * Perform a CLP related operation + * Perform a CLP related operation, see SF-110495-PS for details of CLP + * processing. This command has been extended to accomodate the requirements of + * different manufacturers which are to be found in SF-119187-TC, SF-119186-TC, + * SF-120509-TC and SF-117282-PS. */ #define MC_CMD_CLP 0x56 #undef MC_CMD_0x56_PRIVILEGE_CTG @@ -6072,7 +6356,10 @@ #define MC_CMD_CLP_IN_SET_MAC_LEN 12 /* MC_CMD_CLP_IN_OP_OFST 0 */ /* MC_CMD_CLP_IN_OP_LEN 4 */ -/* MAC address assigned to port */ +/* The MAC address assigned to port. A zero MAC address of 00:00:00:00:00:00 + * restores the permanent (factory-programmed) MAC address associated with the + * port. A non-zero MAC address persists until a PCIe reset or a power cycle. + */ #define MC_CMD_CLP_IN_SET_MAC_ADDR_OFST 4 #define MC_CMD_CLP_IN_SET_MAC_ADDR_LEN 6 /* Padding */ @@ -6082,11 +6369,38 @@ /* MC_CMD_CLP_OUT_SET_MAC msgresponse */ #define MC_CMD_CLP_OUT_SET_MAC_LEN 0 +/* MC_CMD_CLP_IN_SET_MAC_V2 msgrequest */ +#define MC_CMD_CLP_IN_SET_MAC_V2_LEN 16 +/* MC_CMD_CLP_IN_OP_OFST 0 */ +/* MC_CMD_CLP_IN_OP_LEN 4 */ +/* The MAC address assigned to port. A zero MAC address of 00:00:00:00:00:00 + * restores the permanent (factory-programmed) MAC address associated with the + * port. A non-zero MAC address persists until a PCIe reset or a power cycle. + */ +#define MC_CMD_CLP_IN_SET_MAC_V2_ADDR_OFST 4 +#define MC_CMD_CLP_IN_SET_MAC_V2_ADDR_LEN 6 +/* Padding */ +#define MC_CMD_CLP_IN_SET_MAC_V2_RESERVED_OFST 10 +#define MC_CMD_CLP_IN_SET_MAC_V2_RESERVED_LEN 2 +#define MC_CMD_CLP_IN_SET_MAC_V2_FLAGS_OFST 12 +#define MC_CMD_CLP_IN_SET_MAC_V2_FLAGS_LEN 4 +#define MC_CMD_CLP_IN_SET_MAC_V2_VIRTUAL_LBN 0 +#define MC_CMD_CLP_IN_SET_MAC_V2_VIRTUAL_WIDTH 1 + /* MC_CMD_CLP_IN_GET_MAC msgrequest */ #define MC_CMD_CLP_IN_GET_MAC_LEN 4 /* MC_CMD_CLP_IN_OP_OFST 0 */ /* MC_CMD_CLP_IN_OP_LEN 4 */ +/* MC_CMD_CLP_IN_GET_MAC_V2 msgrequest */ +#define MC_CMD_CLP_IN_GET_MAC_V2_LEN 8 +/* MC_CMD_CLP_IN_OP_OFST 0 */ +/* MC_CMD_CLP_IN_OP_LEN 4 */ +#define MC_CMD_CLP_IN_GET_MAC_V2_FLAGS_OFST 4 +#define MC_CMD_CLP_IN_GET_MAC_V2_FLAGS_LEN 4 +#define MC_CMD_CLP_IN_GET_MAC_V2_PERMANENT_LBN 0 +#define MC_CMD_CLP_IN_GET_MAC_V2_PERMANENT_WIDTH 1 + /* MC_CMD_CLP_OUT_GET_MAC msgresponse */ #define MC_CMD_CLP_OUT_GET_MAC_LEN 8 /* MAC address assigned to port */ @@ -6204,6 +6518,7 @@ /* MC_CMD_MUM_IN_WRITE msgrequest */ #define MC_CMD_MUM_IN_WRITE_LENMIN 16 #define MC_CMD_MUM_IN_WRITE_LENMAX 252 +#define MC_CMD_MUM_IN_WRITE_LENMAX_MCDI2 1020 #define MC_CMD_MUM_IN_WRITE_LEN(num) (12+4*(num)) /* MUM cmd header */ /* MC_CMD_MUM_IN_CMD_OFST 0 */ @@ -6221,10 +6536,12 @@ #define MC_CMD_MUM_IN_WRITE_BUFFER_LEN 4 #define MC_CMD_MUM_IN_WRITE_BUFFER_MINNUM 1 #define MC_CMD_MUM_IN_WRITE_BUFFER_MAXNUM 60 +#define MC_CMD_MUM_IN_WRITE_BUFFER_MAXNUM_MCDI2 252 /* MC_CMD_MUM_IN_RAW_CMD msgrequest */ #define MC_CMD_MUM_IN_RAW_CMD_LENMIN 17 #define MC_CMD_MUM_IN_RAW_CMD_LENMAX 252 +#define MC_CMD_MUM_IN_RAW_CMD_LENMAX_MCDI2 1020 #define MC_CMD_MUM_IN_RAW_CMD_LEN(num) (16+1*(num)) /* MUM cmd header */ /* MC_CMD_MUM_IN_CMD_OFST 0 */ @@ -6243,6 +6560,7 @@ #define MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_LEN 1 #define MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MINNUM 1 #define MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MAXNUM 236 +#define MC_CMD_MUM_IN_RAW_CMD_WRITE_DATA_MAXNUM_MCDI2 1004 /* MC_CMD_MUM_IN_LOG msgrequest */ #define MC_CMD_MUM_IN_LOG_LEN 8 @@ -6529,21 +6847,25 @@ /* MC_CMD_MUM_OUT_RAW_CMD msgresponse */ #define MC_CMD_MUM_OUT_RAW_CMD_LENMIN 1 #define MC_CMD_MUM_OUT_RAW_CMD_LENMAX 252 +#define MC_CMD_MUM_OUT_RAW_CMD_LENMAX_MCDI2 1020 #define MC_CMD_MUM_OUT_RAW_CMD_LEN(num) (0+1*(num)) /* returned data */ #define MC_CMD_MUM_OUT_RAW_CMD_DATA_OFST 0 #define MC_CMD_MUM_OUT_RAW_CMD_DATA_LEN 1 #define MC_CMD_MUM_OUT_RAW_CMD_DATA_MINNUM 1 #define MC_CMD_MUM_OUT_RAW_CMD_DATA_MAXNUM 252 +#define MC_CMD_MUM_OUT_RAW_CMD_DATA_MAXNUM_MCDI2 1020 /* MC_CMD_MUM_OUT_READ msgresponse */ #define MC_CMD_MUM_OUT_READ_LENMIN 4 #define MC_CMD_MUM_OUT_READ_LENMAX 252 +#define MC_CMD_MUM_OUT_READ_LENMAX_MCDI2 1020 #define MC_CMD_MUM_OUT_READ_LEN(num) (0+4*(num)) #define MC_CMD_MUM_OUT_READ_BUFFER_OFST 0 #define MC_CMD_MUM_OUT_READ_BUFFER_LEN 4 #define MC_CMD_MUM_OUT_READ_BUFFER_MINNUM 1 #define MC_CMD_MUM_OUT_READ_BUFFER_MAXNUM 63 +#define MC_CMD_MUM_OUT_READ_BUFFER_MAXNUM_MCDI2 255 /* MC_CMD_MUM_OUT_WRITE msgresponse */ #define MC_CMD_MUM_OUT_WRITE_LEN 0 @@ -6602,11 +6924,13 @@ /* MC_CMD_MUM_OUT_READ_SENSORS msgresponse */ #define MC_CMD_MUM_OUT_READ_SENSORS_LENMIN 4 #define MC_CMD_MUM_OUT_READ_SENSORS_LENMAX 252 +#define MC_CMD_MUM_OUT_READ_SENSORS_LENMAX_MCDI2 1020 #define MC_CMD_MUM_OUT_READ_SENSORS_LEN(num) (0+4*(num)) #define MC_CMD_MUM_OUT_READ_SENSORS_DATA_OFST 0 #define MC_CMD_MUM_OUT_READ_SENSORS_DATA_LEN 4 #define MC_CMD_MUM_OUT_READ_SENSORS_DATA_MINNUM 1 #define MC_CMD_MUM_OUT_READ_SENSORS_DATA_MAXNUM 63 +#define MC_CMD_MUM_OUT_READ_SENSORS_DATA_MAXNUM_MCDI2 255 #define MC_CMD_MUM_OUT_READ_SENSORS_READING_LBN 0 #define MC_CMD_MUM_OUT_READ_SENSORS_READING_WIDTH 16 #define MC_CMD_MUM_OUT_READ_SENSORS_STATE_LBN 16 @@ -6649,6 +6973,7 @@ /* MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO msgresponse */ #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMIN 5 #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMAX 252 +#define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LENMAX_MCDI2 1020 #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_LEN(num) (4+1*(num)) /* in bytes */ #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATALEN_OFST 0 @@ -6657,6 +6982,7 @@ #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_LEN 1 #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MINNUM 1 #define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MAXNUM 248 +#define MC_CMD_MUM_OUT_QSFP_GET_MEDIA_INFO_DATA_MAXNUM_MCDI2 1016 /* MC_CMD_MUM_OUT_QSFP_FILL_STATS msgresponse */ #define MC_CMD_MUM_OUT_QSFP_FILL_STATS_LEN 8 @@ -6673,6 +6999,7 @@ /* MC_CMD_MUM_OUT_READ_DDR_INFO msgresponse */ #define MC_CMD_MUM_OUT_READ_DDR_INFO_LENMIN 24 #define MC_CMD_MUM_OUT_READ_DDR_INFO_LENMAX 248 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_LENMAX_MCDI2 1016 #define MC_CMD_MUM_OUT_READ_DDR_INFO_LEN(num) (8+8*(num)) /* Discrete (soldered) DDR resistor strap info */ #define MC_CMD_MUM_OUT_READ_DDR_INFO_DISCRETE_DDR_INFO_OFST 0 @@ -6691,6 +7018,7 @@ #define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_HI_OFST 12 #define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MINNUM 2 #define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MAXNUM 30 +#define MC_CMD_MUM_OUT_READ_DDR_INFO_SODIMM_INFO_RECORD_MAXNUM_MCDI2 126 #define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_LBN 0 #define MC_CMD_MUM_OUT_READ_DDR_INFO_BANK_ID_WIDTH 8 /* enum: SODIMM bank 1 (Top SODIMM for Sorrento) */ @@ -6893,6 +7221,14 @@ * subset of the information stored in this partition. */ #define NVRAM_PARTITION_TYPE_FRU_INFORMATION 0x1d00 +/* enum: Bundle image partition */ +#define NVRAM_PARTITION_TYPE_BUNDLE 0x1e00 +/* enum: Bundle metadata partition that holds additional information related to + * a bundle update in TLV format + */ +#define NVRAM_PARTITION_TYPE_BUNDLE_METADATA 0x1e01 +/* enum: Bundle update non-volatile log output partition */ +#define NVRAM_PARTITION_TYPE_BUNDLE_LOG 0x1e02 /* enum: Start of reserved value range (firmware may use for any purpose) */ #define NVRAM_PARTITION_TYPE_RESERVED_VALUES_MIN 0xff00 /* enum: End of reserved value range (firmware may use for any purpose) */ @@ -7191,6 +7527,7 @@ /* MC_CMD_INIT_EVQ_IN msgrequest */ #define MC_CMD_INIT_EVQ_IN_LENMIN 44 #define MC_CMD_INIT_EVQ_IN_LENMAX 548 +#define MC_CMD_INIT_EVQ_IN_LENMAX_MCDI2 548 #define MC_CMD_INIT_EVQ_IN_LEN(num) (36+8*(num)) /* Size, in entries */ #define MC_CMD_INIT_EVQ_IN_SIZE_OFST 0 @@ -7264,6 +7601,7 @@ #define MC_CMD_INIT_EVQ_IN_DMA_ADDR_HI_OFST 40 #define MC_CMD_INIT_EVQ_IN_DMA_ADDR_MINNUM 1 #define MC_CMD_INIT_EVQ_IN_DMA_ADDR_MAXNUM 64 +#define MC_CMD_INIT_EVQ_IN_DMA_ADDR_MAXNUM_MCDI2 64 /* MC_CMD_INIT_EVQ_OUT msgresponse */ #define MC_CMD_INIT_EVQ_OUT_LEN 4 @@ -7274,6 +7612,7 @@ /* MC_CMD_INIT_EVQ_V2_IN msgrequest */ #define MC_CMD_INIT_EVQ_V2_IN_LENMIN 44 #define MC_CMD_INIT_EVQ_V2_IN_LENMAX 548 +#define MC_CMD_INIT_EVQ_V2_IN_LENMAX_MCDI2 548 #define MC_CMD_INIT_EVQ_V2_IN_LEN(num) (36+8*(num)) /* Size, in entries */ #define MC_CMD_INIT_EVQ_V2_IN_SIZE_OFST 0 @@ -7368,6 +7707,7 @@ #define MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_HI_OFST 40 #define MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MINNUM 1 #define MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MAXNUM 64 +#define MC_CMD_INIT_EVQ_V2_IN_DMA_ADDR_MAXNUM_MCDI2 64 /* MC_CMD_INIT_EVQ_V2_OUT msgresponse */ #define MC_CMD_INIT_EVQ_V2_OUT_LEN 8 @@ -7422,6 +7762,7 @@ */ #define MC_CMD_INIT_RXQ_IN_LENMIN 36 #define MC_CMD_INIT_RXQ_IN_LENMAX 252 +#define MC_CMD_INIT_RXQ_IN_LENMAX_MCDI2 1020 #define MC_CMD_INIT_RXQ_IN_LEN(num) (28+8*(num)) /* Size, in entries */ #define MC_CMD_INIT_RXQ_IN_SIZE_OFST 0 @@ -7470,6 +7811,7 @@ #define MC_CMD_INIT_RXQ_IN_DMA_ADDR_HI_OFST 32 #define MC_CMD_INIT_RXQ_IN_DMA_ADDR_MINNUM 1 #define MC_CMD_INIT_RXQ_IN_DMA_ADDR_MAXNUM 28 +#define MC_CMD_INIT_RXQ_IN_DMA_ADDR_MAXNUM_MCDI2 124 /* MC_CMD_INIT_RXQ_EXT_IN msgrequest: Extended RXQ_INIT with additional mode * flags @@ -7539,6 +7881,8 @@ #define MC_CMD_INIT_RXQ_EXT_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1 #define MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_LBN 19 #define MC_CMD_INIT_RXQ_EXT_IN_FLAG_FORCE_EV_MERGING_WIDTH 1 +#define MC_CMD_INIT_RXQ_EXT_IN_FLAG_NO_CONT_EV_LBN 20 +#define MC_CMD_INIT_RXQ_EXT_IN_FLAG_NO_CONT_EV_WIDTH 1 /* Owner ID to use if in buffer mode (zero if physical) */ #define MC_CMD_INIT_RXQ_EXT_IN_OWNER_ID_OFST 20 #define MC_CMD_INIT_RXQ_EXT_IN_OWNER_ID_LEN 4 @@ -7621,6 +7965,8 @@ #define MC_CMD_INIT_RXQ_V3_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1 #define MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_LBN 19 #define MC_CMD_INIT_RXQ_V3_IN_FLAG_FORCE_EV_MERGING_WIDTH 1 +#define MC_CMD_INIT_RXQ_V3_IN_FLAG_NO_CONT_EV_LBN 20 +#define MC_CMD_INIT_RXQ_V3_IN_FLAG_NO_CONT_EV_WIDTH 1 /* Owner ID to use if in buffer mode (zero if physical) */ #define MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_OFST 20 #define MC_CMD_INIT_RXQ_V3_IN_OWNER_ID_LEN 4 @@ -7664,6 +8010,132 @@ #define MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_OFST 556 #define MC_CMD_INIT_RXQ_V3_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_LEN 4 +/* MC_CMD_INIT_RXQ_V4_IN msgrequest: INIT_RXQ request with new field required + * for systems with a QDMA (currently, Riverhead) + */ +#define MC_CMD_INIT_RXQ_V4_IN_LEN 564 +/* Size, in entries */ +#define MC_CMD_INIT_RXQ_V4_IN_SIZE_OFST 0 +#define MC_CMD_INIT_RXQ_V4_IN_SIZE_LEN 4 +/* The EVQ to send events to. This is an index originally specified to + * INIT_EVQ. If DMA_MODE == PACKED_STREAM this must be equal to INSTANCE. + */ +#define MC_CMD_INIT_RXQ_V4_IN_TARGET_EVQ_OFST 4 +#define MC_CMD_INIT_RXQ_V4_IN_TARGET_EVQ_LEN 4 +/* The value to put in the event data. Check hardware spec. for valid range. + * This field is ignored if DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER or DMA_MODE + * == PACKED_STREAM. + */ +#define MC_CMD_INIT_RXQ_V4_IN_LABEL_OFST 8 +#define MC_CMD_INIT_RXQ_V4_IN_LABEL_LEN 4 +/* Desired instance. Must be set to a specific instance, which is a function + * local queue index. + */ +#define MC_CMD_INIT_RXQ_V4_IN_INSTANCE_OFST 12 +#define MC_CMD_INIT_RXQ_V4_IN_INSTANCE_LEN 4 +/* There will be more flags here. */ +#define MC_CMD_INIT_RXQ_V4_IN_FLAGS_OFST 16 +#define MC_CMD_INIT_RXQ_V4_IN_FLAGS_LEN 4 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_BUFF_MODE_LBN 0 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_BUFF_MODE_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_HDR_SPLIT_LBN 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_HDR_SPLIT_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_TIMESTAMP_LBN 2 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_TIMESTAMP_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_CRC_MODE_LBN 3 +#define MC_CMD_INIT_RXQ_V4_IN_CRC_MODE_WIDTH 4 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_CHAIN_LBN 7 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_CHAIN_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_PREFIX_LBN 8 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_PREFIX_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_DISABLE_SCATTER_LBN 9 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_DISABLE_SCATTER_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_MODE_LBN 10 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_MODE_WIDTH 4 +/* enum: One packet per descriptor (for normal networking) */ +#define MC_CMD_INIT_RXQ_V4_IN_SINGLE_PACKET 0x0 +/* enum: Pack multiple packets into large descriptors (for SolarCapture) */ +#define MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM 0x1 +/* enum: Pack multiple packets into large descriptors using the format designed + * to maximise packet rate. This mode uses 1 "bucket" per descriptor with + * multiple fixed-size packet buffers within each bucket. For a full + * description see SF-119419-TC. This mode is only supported by "dpdk" datapath + * firmware. + */ +#define MC_CMD_INIT_RXQ_V4_IN_EQUAL_STRIDE_SUPER_BUFFER 0x2 +/* enum: Deprecated name for EQUAL_STRIDE_SUPER_BUFFER. */ +#define MC_CMD_INIT_RXQ_V4_IN_EQUAL_STRIDE_PACKED_STREAM 0x2 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_SNAPSHOT_MODE_LBN 14 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_SNAPSHOT_MODE_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM_BUFF_SIZE_LBN 15 +#define MC_CMD_INIT_RXQ_V4_IN_PACKED_STREAM_BUFF_SIZE_WIDTH 3 +#define MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_1M 0x0 /* enum */ +#define MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_512K 0x1 /* enum */ +#define MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_256K 0x2 /* enum */ +#define MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_128K 0x3 /* enum */ +#define MC_CMD_INIT_RXQ_V4_IN_PS_BUFF_64K 0x4 /* enum */ +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_WANT_OUTER_CLASSES_LBN 18 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_WANT_OUTER_CLASSES_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_FORCE_EV_MERGING_LBN 19 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_FORCE_EV_MERGING_WIDTH 1 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_NO_CONT_EV_LBN 20 +#define MC_CMD_INIT_RXQ_V4_IN_FLAG_NO_CONT_EV_WIDTH 1 +/* Owner ID to use if in buffer mode (zero if physical) */ +#define MC_CMD_INIT_RXQ_V4_IN_OWNER_ID_OFST 20 +#define MC_CMD_INIT_RXQ_V4_IN_OWNER_ID_LEN 4 +/* The port ID associated with the v-adaptor which should contain this DMAQ. */ +#define MC_CMD_INIT_RXQ_V4_IN_PORT_ID_OFST 24 +#define MC_CMD_INIT_RXQ_V4_IN_PORT_ID_LEN 4 +/* 64-bit address of 4k of 4k-aligned host memory buffer */ +#define MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_OFST 28 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_LEN 8 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_LO_OFST 28 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_HI_OFST 32 +#define MC_CMD_INIT_RXQ_V4_IN_DMA_ADDR_NUM 64 +/* Maximum length of packet to receive, if SNAPSHOT_MODE flag is set */ +#define MC_CMD_INIT_RXQ_V4_IN_SNAPSHOT_LENGTH_OFST 540 +#define MC_CMD_INIT_RXQ_V4_IN_SNAPSHOT_LENGTH_LEN 4 +/* The number of packet buffers that will be contained within each + * EQUAL_STRIDE_SUPER_BUFFER format bucket supplied by the driver. This field + * is ignored unless DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER. + */ +#define MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_BUFFERS_PER_BUCKET_OFST 544 +#define MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_BUFFERS_PER_BUCKET_LEN 4 +/* The length in bytes of the area in each packet buffer that can be written to + * by the adapter. This is used to store the packet prefix and the packet + * payload. This length does not include any end padding added by the driver. + * This field is ignored unless DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER. + */ +#define MC_CMD_INIT_RXQ_V4_IN_ES_MAX_DMA_LEN_OFST 548 +#define MC_CMD_INIT_RXQ_V4_IN_ES_MAX_DMA_LEN_LEN 4 +/* The length in bytes of a single packet buffer within a + * EQUAL_STRIDE_SUPER_BUFFER format bucket. This field is ignored unless + * DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER. + */ +#define MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_STRIDE_OFST 552 +#define MC_CMD_INIT_RXQ_V4_IN_ES_PACKET_STRIDE_LEN 4 +/* The maximum time in nanoseconds that the datapath will be backpressured if + * there are no RX descriptors available. If the timeout is reached and there + * are still no descriptors then the packet will be dropped. A timeout of 0 + * means the datapath will never be blocked. This field is ignored unless + * DMA_MODE == EQUAL_STRIDE_SUPER_BUFFER. + */ +#define MC_CMD_INIT_RXQ_V4_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_OFST 556 +#define MC_CMD_INIT_RXQ_V4_IN_ES_HEAD_OF_LINE_BLOCK_TIMEOUT_LEN 4 +/* V4 message data */ +#define MC_CMD_INIT_RXQ_V4_IN_V4_DATA_OFST 560 +#define MC_CMD_INIT_RXQ_V4_IN_V4_DATA_LEN 4 +/* Size in bytes of buffers attached to descriptors posted to this queue. Set + * to zero if using this message on non-QDMA based platforms. Currently in + * Riverhead there is a global limit of eight different buffer sizes across all + * active queues. A 2KB and 4KB buffer is guaranteed to be available, but a + * request for a different buffer size will fail if there are already eight + * other buffer sizes in use. In future Riverhead this limit will go away and + * any size will be accepted. + */ +#define MC_CMD_INIT_RXQ_V4_IN_BUFFER_SIZE_BYTES_OFST 560 +#define MC_CMD_INIT_RXQ_V4_IN_BUFFER_SIZE_BYTES_LEN 4 + /* MC_CMD_INIT_RXQ_OUT msgresponse */ #define MC_CMD_INIT_RXQ_OUT_LEN 0 @@ -7673,6 +8145,9 @@ /* MC_CMD_INIT_RXQ_V3_OUT msgresponse */ #define MC_CMD_INIT_RXQ_V3_OUT_LEN 0 +/* MC_CMD_INIT_RXQ_V4_OUT msgresponse */ +#define MC_CMD_INIT_RXQ_V4_OUT_LEN 0 + /***********************************/ /* MC_CMD_INIT_TXQ @@ -7687,6 +8162,7 @@ */ #define MC_CMD_INIT_TXQ_IN_LENMIN 36 #define MC_CMD_INIT_TXQ_IN_LENMAX 252 +#define MC_CMD_INIT_TXQ_IN_LENMAX_MCDI2 1020 #define MC_CMD_INIT_TXQ_IN_LEN(num) (28+8*(num)) /* Size, in entries */ #define MC_CMD_INIT_TXQ_IN_SIZE_OFST 0 @@ -7738,6 +8214,7 @@ #define MC_CMD_INIT_TXQ_IN_DMA_ADDR_HI_OFST 32 #define MC_CMD_INIT_TXQ_IN_DMA_ADDR_MINNUM 1 #define MC_CMD_INIT_TXQ_IN_DMA_ADDR_MAXNUM 28 +#define MC_CMD_INIT_TXQ_IN_DMA_ADDR_MAXNUM_MCDI2 124 /* MC_CMD_INIT_TXQ_EXT_IN msgrequest: Extended INIT_TXQ with additional mode * flags @@ -7799,6 +8276,7 @@ #define MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_HI_OFST 32 #define MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MINNUM 1 #define MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MAXNUM 64 +#define MC_CMD_INIT_TXQ_EXT_IN_DMA_ADDR_MAXNUM_MCDI2 64 /* Flags related to Qbb flow control mode. */ #define MC_CMD_INIT_TXQ_EXT_IN_QBB_FLAGS_OFST 540 #define MC_CMD_INIT_TXQ_EXT_IN_QBB_FLAGS_LEN 4 @@ -8153,6 +8631,7 @@ /* MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN msgrequest */ #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMIN 20 #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMAX 268 +#define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LENMAX_MCDI2 268 #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_LEN(num) (12+8*(num)) #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_HANDLE_OFST 0 #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_HANDLE_LEN 4 @@ -8169,6 +8648,7 @@ #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_HI_OFST 16 #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MINNUM 1 #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MAXNUM 32 +#define MC_CMD_PROGRAM_BUFTBL_ENTRIES_IN_ENTRY_MAXNUM_MCDI2 32 /* MC_CMD_PROGRAM_BUFTBL_ENTRIES_OUT msgresponse */ #define MC_CMD_PROGRAM_BUFTBL_ENTRIES_OUT_LEN 0 @@ -8931,6 +9411,7 @@ /* MC_CMD_GET_PARSER_DISP_INFO_OUT msgresponse */ #define MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMIN 8 #define MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMAX 252 +#define MC_CMD_GET_PARSER_DISP_INFO_OUT_LENMAX_MCDI2 1020 #define MC_CMD_GET_PARSER_DISP_INFO_OUT_LEN(num) (8+4*(num)) /* identifies the type of operation requested */ #define MC_CMD_GET_PARSER_DISP_INFO_OUT_OP_OFST 0 @@ -8947,6 +9428,7 @@ #define MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_LEN 4 #define MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MINNUM 0 #define MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MAXNUM 61 +#define MC_CMD_GET_PARSER_DISP_INFO_OUT_SUPPORTED_MATCHES_MAXNUM_MCDI2 253 /* MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT msgresponse */ #define MC_CMD_GET_PARSER_DISP_RESTRICTIONS_OUT_LEN 8 @@ -9708,6 +10190,7 @@ */ #define MC_CMD_SATELLITE_DOWNLOAD_IN_LENMIN 20 #define MC_CMD_SATELLITE_DOWNLOAD_IN_LENMAX 252 +#define MC_CMD_SATELLITE_DOWNLOAD_IN_LENMAX_MCDI2 1020 #define MC_CMD_SATELLITE_DOWNLOAD_IN_LEN(num) (16+4*(num)) /* Download phase. (Note: the IDLE phase is used internally and is never valid * in a command from the host.) @@ -9773,6 +10256,7 @@ #define MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_LEN 4 #define MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MINNUM 1 #define MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MAXNUM 59 +#define MC_CMD_SATELLITE_DOWNLOAD_IN_CHUNK_DATA_MAXNUM_MCDI2 251 /* MC_CMD_SATELLITE_DOWNLOAD_OUT msgresponse */ #define MC_CMD_SATELLITE_DOWNLOAD_OUT_LEN 8 @@ -9948,6 +10432,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: RX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: RX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -9994,6 +10481,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: TX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: TX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10162,6 +10652,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: RX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: RX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10208,6 +10701,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: TX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V2_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: TX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10296,6 +10792,12 @@ #define MC_CMD_GET_CAPABILITIES_V2_OUT_VI_SPREADING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_HLB_IDLE_LBN 25 #define MC_CMD_GET_CAPABILITIES_V2_OUT_RXDP_HLB_IDLE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_NO_CONT_EV_LBN 26 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_BUNDLE_UPDATE_LBN 28 +#define MC_CMD_GET_CAPABILITIES_V2_OUT_BUNDLE_UPDATE_WIDTH 1 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present * on older firmware (check the length). */ @@ -10485,6 +10987,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: RX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V3_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: RX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10531,6 +11036,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: TX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V3_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: TX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10619,6 +11127,12 @@ #define MC_CMD_GET_CAPABILITIES_V3_OUT_VI_SPREADING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_HLB_IDLE_LBN 25 #define MC_CMD_GET_CAPABILITIES_V3_OUT_RXDP_HLB_IDLE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_NO_CONT_EV_LBN 26 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_BUNDLE_UPDATE_LBN 28 +#define MC_CMD_GET_CAPABILITIES_V3_OUT_BUNDLE_UPDATE_WIDTH 1 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present * on older firmware (check the length). */ @@ -10833,6 +11347,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: RX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V4_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: RX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10879,6 +11396,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: TX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V4_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: TX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -10967,6 +11487,12 @@ #define MC_CMD_GET_CAPABILITIES_V4_OUT_VI_SPREADING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_HLB_IDLE_LBN 25 #define MC_CMD_GET_CAPABILITIES_V4_OUT_RXDP_HLB_IDLE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_NO_CONT_EV_LBN 26 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_BUNDLE_UPDATE_LBN 28 +#define MC_CMD_GET_CAPABILITIES_V4_OUT_BUNDLE_UPDATE_WIDTH 1 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present * on older firmware (check the length). */ @@ -11189,6 +11715,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V5_OUT_RXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: RX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V5_OUT_RXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: RX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -11235,6 +11764,9 @@ * development only) */ #define MC_CMD_GET_CAPABILITIES_V5_OUT_TXPD_FW_TYPE_FIRST_PKT 0x1 +/* enum: TX PD firmware for telemetry prototyping (Medford2 development only) + */ +#define MC_CMD_GET_CAPABILITIES_V5_OUT_TXPD_FW_TYPE_TESTFW_TELEMETRY 0x1 /* enum: TX PD firmware with approximately Siena-compatible behaviour * (Huntington development only) */ @@ -11323,6 +11855,12 @@ #define MC_CMD_GET_CAPABILITIES_V5_OUT_VI_SPREADING_WIDTH 1 #define MC_CMD_GET_CAPABILITIES_V5_OUT_RXDP_HLB_IDLE_LBN 25 #define MC_CMD_GET_CAPABILITIES_V5_OUT_RXDP_HLB_IDLE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_NO_CONT_EV_LBN 26 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_NO_CONT_EV_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_WITH_BUFFER_SIZE_LBN 27 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_INIT_RXQ_WITH_BUFFER_SIZE_WIDTH 1 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_BUNDLE_UPDATE_LBN 28 +#define MC_CMD_GET_CAPABILITIES_V5_OUT_BUNDLE_UPDATE_WIDTH 1 /* Number of FATSOv2 contexts per datapath supported by this NIC. Not present * on older firmware (check the length). */ @@ -12531,6 +13069,7 @@ /* MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT msgresponse */ #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMIN 4 #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX 250 +#define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LENMAX_MCDI2 1018 #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_LEN(num) (4+6*(num)) /* The number of MAC addresses returned */ #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_COUNT_OFST 0 @@ -12540,6 +13079,7 @@ #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_LEN 6 #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MINNUM 0 #define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MAXNUM 41 +#define MC_CMD_VPORT_GET_MAC_ADDRESSES_OUT_MACADDR_MAXNUM_MCDI2 169 /***********************************/ @@ -12645,12 +13185,14 @@ /* MC_CMD_DUMP_BUFTBL_ENTRIES_OUT msgresponse */ #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMIN 12 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMAX 252 +#define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LENMAX_MCDI2 1020 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_LEN(num) (0+12*(num)) /* Raw buffer table entries, layed out as BUFTBL_ENTRY. */ #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_OFST 0 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_LEN 12 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MINNUM 1 #define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MAXNUM 21 +#define MC_CMD_DUMP_BUFTBL_ENTRIES_OUT_ENTRY_MAXNUM_MCDI2 85 /***********************************/ @@ -12979,6 +13521,7 @@ /* MC_CMD_CAP_BLK_READ_OUT msgresponse */ #define MC_CMD_CAP_BLK_READ_OUT_LENMIN 8 #define MC_CMD_CAP_BLK_READ_OUT_LENMAX 248 +#define MC_CMD_CAP_BLK_READ_OUT_LENMAX_MCDI2 1016 #define MC_CMD_CAP_BLK_READ_OUT_LEN(num) (0+8*(num)) #define MC_CMD_CAP_BLK_READ_OUT_BUFFER_OFST 0 #define MC_CMD_CAP_BLK_READ_OUT_BUFFER_LEN 8 @@ -12986,6 +13529,7 @@ #define MC_CMD_CAP_BLK_READ_OUT_BUFFER_HI_OFST 4 #define MC_CMD_CAP_BLK_READ_OUT_BUFFER_MINNUM 1 #define MC_CMD_CAP_BLK_READ_OUT_BUFFER_MAXNUM 31 +#define MC_CMD_CAP_BLK_READ_OUT_BUFFER_MAXNUM_MCDI2 127 /***********************************/ @@ -13215,6 +13759,7 @@ /* MC_CMD_UART_SEND_DATA_OUT msgrequest */ #define MC_CMD_UART_SEND_DATA_OUT_LENMIN 16 #define MC_CMD_UART_SEND_DATA_OUT_LENMAX 252 +#define MC_CMD_UART_SEND_DATA_OUT_LENMAX_MCDI2 1020 #define MC_CMD_UART_SEND_DATA_OUT_LEN(num) (16+1*(num)) /* CRC32 over OFFSET, LENGTH, RESERVED, DATA */ #define MC_CMD_UART_SEND_DATA_OUT_CHECKSUM_OFST 0 @@ -13232,6 +13777,7 @@ #define MC_CMD_UART_SEND_DATA_OUT_DATA_LEN 1 #define MC_CMD_UART_SEND_DATA_OUT_DATA_MINNUM 0 #define MC_CMD_UART_SEND_DATA_OUT_DATA_MAXNUM 236 +#define MC_CMD_UART_SEND_DATA_OUT_DATA_MAXNUM_MCDI2 1004 /* MC_CMD_UART_SEND_DATA_IN msgresponse */ #define MC_CMD_UART_SEND_DATA_IN_LEN 0 @@ -13265,6 +13811,7 @@ /* MC_CMD_UART_RECV_DATA_IN msgresponse */ #define MC_CMD_UART_RECV_DATA_IN_LENMIN 16 #define MC_CMD_UART_RECV_DATA_IN_LENMAX 252 +#define MC_CMD_UART_RECV_DATA_IN_LENMAX_MCDI2 1020 #define MC_CMD_UART_RECV_DATA_IN_LEN(num) (16+1*(num)) /* CRC32 over RESERVED1, RESERVED2, RESERVED3, DATA */ #define MC_CMD_UART_RECV_DATA_IN_CHECKSUM_OFST 0 @@ -13282,6 +13829,7 @@ #define MC_CMD_UART_RECV_DATA_IN_DATA_LEN 1 #define MC_CMD_UART_RECV_DATA_IN_DATA_MINNUM 0 #define MC_CMD_UART_RECV_DATA_IN_DATA_MAXNUM 236 +#define MC_CMD_UART_RECV_DATA_IN_DATA_MAXNUM_MCDI2 1004 /***********************************/ @@ -13305,6 +13853,7 @@ /* MC_CMD_READ_FUSES_OUT msgresponse */ #define MC_CMD_READ_FUSES_OUT_LENMIN 4 #define MC_CMD_READ_FUSES_OUT_LENMAX 252 +#define MC_CMD_READ_FUSES_OUT_LENMAX_MCDI2 1020 #define MC_CMD_READ_FUSES_OUT_LEN(num) (4+1*(num)) /* Length of returned OTP data in bytes */ #define MC_CMD_READ_FUSES_OUT_LENGTH_OFST 0 @@ -13314,6 +13863,7 @@ #define MC_CMD_READ_FUSES_OUT_DATA_LEN 1 #define MC_CMD_READ_FUSES_OUT_DATA_MINNUM 0 #define MC_CMD_READ_FUSES_OUT_DATA_MAXNUM 248 +#define MC_CMD_READ_FUSES_OUT_DATA_MAXNUM_MCDI2 1016 /***********************************/ @@ -13328,6 +13878,7 @@ /* MC_CMD_KR_TUNE_IN msgrequest */ #define MC_CMD_KR_TUNE_IN_LENMIN 4 #define MC_CMD_KR_TUNE_IN_LENMAX 252 +#define MC_CMD_KR_TUNE_IN_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_IN_LEN(num) (4+4*(num)) /* Requested operation */ #define MC_CMD_KR_TUNE_IN_KR_TUNE_OP_OFST 0 @@ -13365,6 +13916,7 @@ #define MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_LEN 4 #define MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MINNUM 0 #define MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MAXNUM 62 +#define MC_CMD_KR_TUNE_IN_KR_TUNE_ARGS_MAXNUM_MCDI2 254 /* MC_CMD_KR_TUNE_OUT msgresponse */ #define MC_CMD_KR_TUNE_OUT_LEN 0 @@ -13381,12 +13933,14 @@ /* MC_CMD_KR_TUNE_RXEQ_GET_OUT msgresponse */ #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMIN 4 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMAX 252 +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_LEN(num) (0+4*(num)) /* RXEQ Parameter */ #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_OFST 0 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LEN 4 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MINNUM 1 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM 63 +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_ID_LBN 0 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_ID_WIDTH 8 /* enum: Attenuation (0-15, Huntington) */ @@ -13475,6 +14029,44 @@ #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_PVT 0x20 /* enum: CDR integral loop code (Medford2) */ #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_CDR_INTEG 0x21 +/* enum: CTLE Boost stages - retimer lineside (Medford2 with DS250x retimer - 4 + * stages, 2 bits per stage) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_BOOST_RT_LS 0x22 +/* enum: DFE Tap1 - retimer lineside (Medford2 with DS250x retimer (-31 - 31)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_RT_LS 0x23 +/* enum: DFE Tap2 - retimer lineside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP2_RT_LS 0x24 +/* enum: DFE Tap3 - retimer lineside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP3_RT_LS 0x25 +/* enum: DFE Tap4 - retimer lineside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP4_RT_LS 0x26 +/* enum: DFE Tap5 - retimer lineside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP5_RT_LS 0x27 +/* enum: CTLE Boost stages - retimer hostside (Medford2 with DS250x retimer - 4 + * stages, 2 bits per stage) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_BOOST_RT_HS 0x28 +/* enum: DFE Tap1 - retimer hostside (Medford2 with DS250x retimer (-31 - 31)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP1_RT_HS 0x29 +/* enum: DFE Tap2 - retimer hostside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP2_RT_HS 0x2a +/* enum: DFE Tap3 - retimer hostside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP3_RT_HS 0x2b +/* enum: DFE Tap4 - retimer hostside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP4_RT_HS 0x2c +/* enum: DFE Tap5 - retimer hostside (Medford2 with DS250x retimer (-15 - 15)) + */ +#define MC_CMD_KR_TUNE_RXEQ_GET_OUT_DFE_TAP5_RT_HS 0x2d #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_LBN 8 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_PARAM_LANE_WIDTH 3 #define MC_CMD_KR_TUNE_RXEQ_GET_OUT_LANE_0 0x0 /* enum */ @@ -13494,6 +14086,7 @@ /* MC_CMD_KR_TUNE_RXEQ_SET_IN msgrequest */ #define MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMIN 8 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMAX 252 +#define MC_CMD_KR_TUNE_RXEQ_SET_IN_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_LEN(num) (4+4*(num)) /* Requested operation */ #define MC_CMD_KR_TUNE_RXEQ_SET_IN_KR_TUNE_OP_OFST 0 @@ -13506,6 +14099,7 @@ #define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_LEN 4 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MINNUM 1 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MAXNUM 62 +#define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_ID_LBN 0 #define MC_CMD_KR_TUNE_RXEQ_SET_IN_PARAM_ID_WIDTH 8 /* Enum values, see field(s): */ @@ -13538,12 +14132,14 @@ /* MC_CMD_KR_TUNE_TXEQ_GET_OUT msgresponse */ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMIN 4 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMAX 252 +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_LEN(num) (0+4*(num)) /* TXEQ Parameter */ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_OFST 0 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LEN 4 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MINNUM 1 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM 63 +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_ID_LBN 0 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_ID_WIDTH 8 /* enum: TX Amplitude (Huntington, Medford, Medford2) */ @@ -13568,10 +14164,22 @@ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_RT_SET 0x9 /* enum: TX Amplitude Fine control (Medford) */ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_FINE 0xa -/* enum: Pre-shoot Tap (Medford, Medford2) */ +/* enum: Pre-cursor Tap (Medford, Medford2) */ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV 0xb -/* enum: De-emphasis Tap (Medford, Medford2) */ +/* enum: Post-cursor Tap (Medford, Medford2) */ #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY 0xc +/* enum: TX Amplitude (Retimer Lineside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_RT_LS 0xd +/* enum: Pre-cursor Tap (Retimer Lineside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV_RT_LS 0xe +/* enum: Post-cursor Tap (Retimer Lineside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY_RT_LS 0xf +/* enum: TX Amplitude (Retimer Hostside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TX_LEV_RT_HS 0x10 +/* enum: Pre-cursor Tap (Retimer Hostside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_ADV_RT_HS 0x11 +/* enum: Post-cursor Tap (Retimer Hostside) */ +#define MC_CMD_KR_TUNE_TXEQ_GET_OUT_TAP_DLY_RT_HS 0x12 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LANE_LBN 8 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_PARAM_LANE_WIDTH 3 #define MC_CMD_KR_TUNE_TXEQ_GET_OUT_LANE_0 0x0 /* enum */ @@ -13589,6 +14197,7 @@ /* MC_CMD_KR_TUNE_TXEQ_SET_IN msgrequest */ #define MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMIN 8 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMAX 252 +#define MC_CMD_KR_TUNE_TXEQ_SET_IN_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_LEN(num) (4+4*(num)) /* Requested operation */ #define MC_CMD_KR_TUNE_TXEQ_SET_IN_KR_TUNE_OP_OFST 0 @@ -13601,6 +14210,7 @@ #define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_LEN 4 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MINNUM 1 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MAXNUM 62 +#define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_ID_LBN 0 #define MC_CMD_KR_TUNE_TXEQ_SET_IN_PARAM_ID_WIDTH 8 /* Enum values, see field(s): */ @@ -13676,11 +14286,13 @@ /* MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT msgresponse */ #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMIN 0 #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMAX 252 +#define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LENMAX_MCDI2 1020 #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_LEN(num) (0+2*(num)) #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_OFST 0 #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_LEN 2 #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MINNUM 0 #define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM 126 +#define MC_CMD_KR_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM_MCDI2 510 /* MC_CMD_KR_TUNE_READ_FOM_IN msgrequest */ #define MC_CMD_KR_TUNE_READ_FOM_IN_LEN 8 @@ -13790,6 +14402,7 @@ /* MC_CMD_PCIE_TUNE_IN msgrequest */ #define MC_CMD_PCIE_TUNE_IN_LENMIN 4 #define MC_CMD_PCIE_TUNE_IN_LENMAX 252 +#define MC_CMD_PCIE_TUNE_IN_LENMAX_MCDI2 1020 #define MC_CMD_PCIE_TUNE_IN_LEN(num) (4+4*(num)) /* Requested operation */ #define MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_OP_OFST 0 @@ -13819,6 +14432,7 @@ #define MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_LEN 4 #define MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MINNUM 0 #define MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MAXNUM 62 +#define MC_CMD_PCIE_TUNE_IN_PCIE_TUNE_ARGS_MAXNUM_MCDI2 254 /* MC_CMD_PCIE_TUNE_OUT msgresponse */ #define MC_CMD_PCIE_TUNE_OUT_LEN 0 @@ -13835,12 +14449,14 @@ /* MC_CMD_PCIE_TUNE_RXEQ_GET_OUT msgresponse */ #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMIN 4 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMAX 252 +#define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LENMAX_MCDI2 1020 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_LEN(num) (0+4*(num)) /* RXEQ Parameter */ #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_OFST 0 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_LEN 4 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MINNUM 1 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM 63 +#define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_ID_LBN 0 #define MC_CMD_PCIE_TUNE_RXEQ_GET_OUT_PARAM_ID_WIDTH 8 /* enum: Attenuation (0-15) */ @@ -13894,6 +14510,7 @@ /* MC_CMD_PCIE_TUNE_RXEQ_SET_IN msgrequest */ #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMIN 8 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMAX 252 +#define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LENMAX_MCDI2 1020 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_LEN(num) (4+4*(num)) /* Requested operation */ #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PCIE_TUNE_OP_OFST 0 @@ -13906,6 +14523,7 @@ #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_LEN 4 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MINNUM 1 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MAXNUM 62 +#define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_MAXNUM_MCDI2 254 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_ID_LBN 0 #define MC_CMD_PCIE_TUNE_RXEQ_SET_IN_PARAM_ID_WIDTH 8 /* Enum values, see field(s): */ @@ -13938,12 +14556,14 @@ /* MC_CMD_PCIE_TUNE_TXEQ_GET_OUT msgresponse */ #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMIN 4 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMAX 252 +#define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LENMAX_MCDI2 1020 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_LEN(num) (0+4*(num)) /* RXEQ Parameter */ #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_OFST 0 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_LEN 4 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MINNUM 1 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM 63 +#define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_MAXNUM_MCDI2 255 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_ID_LBN 0 #define MC_CMD_PCIE_TUNE_TXEQ_GET_OUT_PARAM_ID_WIDTH 8 /* enum: TxMargin (PIPE) */ @@ -13991,11 +14611,13 @@ /* MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT msgresponse */ #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMIN 0 #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMAX 252 +#define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LENMAX_MCDI2 1020 #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_LEN(num) (0+2*(num)) #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_OFST 0 #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_LEN 2 #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MINNUM 0 #define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM 126 +#define MC_CMD_PCIE_TUNE_POLL_EYE_PLOT_OUT_SAMPLES_MAXNUM_MCDI2 510 /* MC_CMD_PCIE_TUNE_BIST_SQUARE_WAVE_IN msgrequest */ #define MC_CMD_PCIE_TUNE_BIST_SQUARE_WAVE_IN_LEN 0 @@ -14146,6 +14768,7 @@ /* MC_CMD_LICENSING_GET_ID_V3_OUT msgresponse */ #define MC_CMD_LICENSING_GET_ID_V3_OUT_LENMIN 8 #define MC_CMD_LICENSING_GET_ID_V3_OUT_LENMAX 252 +#define MC_CMD_LICENSING_GET_ID_V3_OUT_LENMAX_MCDI2 1020 #define MC_CMD_LICENSING_GET_ID_V3_OUT_LEN(num) (8+1*(num)) /* type of license (eg 3) */ #define MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_TYPE_OFST 0 @@ -14158,6 +14781,7 @@ #define MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_LEN 1 #define MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MINNUM 0 #define MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MAXNUM 244 +#define MC_CMD_LICENSING_GET_ID_V3_OUT_LICENSE_ID_MAXNUM_MCDI2 1012 /***********************************/ @@ -14280,6 +14904,7 @@ /* MC_CMD_LICENSED_APP_OP_IN msgrequest */ #define MC_CMD_LICENSED_APP_OP_IN_LENMIN 8 #define MC_CMD_LICENSED_APP_OP_IN_LENMAX 252 +#define MC_CMD_LICENSED_APP_OP_IN_LENMAX_MCDI2 1020 #define MC_CMD_LICENSED_APP_OP_IN_LEN(num) (8+4*(num)) /* application ID */ #define MC_CMD_LICENSED_APP_OP_IN_APP_ID_OFST 0 @@ -14296,16 +14921,19 @@ #define MC_CMD_LICENSED_APP_OP_IN_ARGS_LEN 4 #define MC_CMD_LICENSED_APP_OP_IN_ARGS_MINNUM 0 #define MC_CMD_LICENSED_APP_OP_IN_ARGS_MAXNUM 61 +#define MC_CMD_LICENSED_APP_OP_IN_ARGS_MAXNUM_MCDI2 253 /* MC_CMD_LICENSED_APP_OP_OUT msgresponse */ #define MC_CMD_LICENSED_APP_OP_OUT_LENMIN 0 #define MC_CMD_LICENSED_APP_OP_OUT_LENMAX 252 +#define MC_CMD_LICENSED_APP_OP_OUT_LENMAX_MCDI2 1020 #define MC_CMD_LICENSED_APP_OP_OUT_LEN(num) (0+4*(num)) /* result specific to this particular operation */ #define MC_CMD_LICENSED_APP_OP_OUT_RESULT_OFST 0 #define MC_CMD_LICENSED_APP_OP_OUT_RESULT_LEN 4 #define MC_CMD_LICENSED_APP_OP_OUT_RESULT_MINNUM 0 #define MC_CMD_LICENSED_APP_OP_OUT_RESULT_MAXNUM 63 +#define MC_CMD_LICENSED_APP_OP_OUT_RESULT_MAXNUM_MCDI2 255 /* MC_CMD_LICENSED_APP_OP_VALIDATE_IN msgrequest */ #define MC_CMD_LICENSED_APP_OP_VALIDATE_IN_LEN 72 @@ -14589,6 +15217,7 @@ /* MC_CMD_SET_PARSER_DISP_CONFIG_IN msgrequest */ #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMIN 12 #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMAX 252 +#define MC_CMD_SET_PARSER_DISP_CONFIG_IN_LENMAX_MCDI2 1020 #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_LEN(num) (8+4*(num)) /* the type of configuration setting to change */ #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_TYPE_OFST 0 @@ -14614,6 +15243,7 @@ #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_LEN 4 #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MINNUM 1 #define MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MAXNUM 61 +#define MC_CMD_SET_PARSER_DISP_CONFIG_IN_VALUE_MAXNUM_MCDI2 253 /* MC_CMD_SET_PARSER_DISP_CONFIG_OUT msgresponse */ #define MC_CMD_SET_PARSER_DISP_CONFIG_OUT_LEN 0 @@ -14644,6 +15274,7 @@ /* MC_CMD_GET_PARSER_DISP_CONFIG_OUT msgresponse */ #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMIN 4 #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMAX 252 +#define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LENMAX_MCDI2 1020 #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_LEN(num) (0+4*(num)) /* current value: the details depend on the type of configuration setting being * read @@ -14652,6 +15283,7 @@ #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_LEN 4 #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MINNUM 1 #define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MAXNUM 63 +#define MC_CMD_GET_PARSER_DISP_CONFIG_OUT_VALUE_MAXNUM_MCDI2 255 /***********************************/ @@ -14817,7 +15449,9 @@ /* MC_CMD_GET_PORT_MODES_OUT msgresponse */ #define MC_CMD_GET_PORT_MODES_OUT_LEN 12 -/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*) */ +/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*) + * that are supported for customer use in production firmware. + */ #define MC_CMD_GET_PORT_MODES_OUT_MODES_OFST 0 #define MC_CMD_GET_PORT_MODES_OUT_MODES_LEN 4 /* Default (canonical) board mode */ @@ -14827,6 +15461,58 @@ #define MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_OFST 8 #define MC_CMD_GET_PORT_MODES_OUT_CURRENT_MODE_LEN 4 +/* MC_CMD_GET_PORT_MODES_OUT_V2 msgresponse */ +#define MC_CMD_GET_PORT_MODES_OUT_V2_LEN 16 +/* Bitmask of port modes available on the board (indexed by TLV_PORT_MODE_*) + * that are supported for customer use in production firmware. + */ +#define MC_CMD_GET_PORT_MODES_OUT_V2_MODES_OFST 0 +#define MC_CMD_GET_PORT_MODES_OUT_V2_MODES_LEN 4 +/* Default (canonical) board mode */ +#define MC_CMD_GET_PORT_MODES_OUT_V2_DEFAULT_MODE_OFST 4 +#define MC_CMD_GET_PORT_MODES_OUT_V2_DEFAULT_MODE_LEN 4 +/* Current board mode */ +#define MC_CMD_GET_PORT_MODES_OUT_V2_CURRENT_MODE_OFST 8 +#define MC_CMD_GET_PORT_MODES_OUT_V2_CURRENT_MODE_LEN 4 +/* Bitmask of engineering port modes available on the board (indexed by + * TLV_PORT_MODE_*). A superset of MC_CMD_GET_PORT_MODES_OUT/MODES that + * contains all modes implemented in firmware for a particular board. Modes + * listed in MODES are considered production modes and should be exposed in + * userland tools. Modes listed in in ENGINEERING_MODES, but not in MODES + * should be considered hidden (not to be exposed in userland tools) and for + * engineering use only. There are no other semantic differences and any mode + * listed in either MODES or ENGINEERING_MODES can be set on the board. + */ +#define MC_CMD_GET_PORT_MODES_OUT_V2_ENGINEERING_MODES_OFST 12 +#define MC_CMD_GET_PORT_MODES_OUT_V2_ENGINEERING_MODES_LEN 4 + + +/***********************************/ +/* MC_CMD_OVERRIDE_PORT_MODE + * Override flash config port mode for subsequent MC reboot(s). Override data + * is stored in the presistent data section of DMEM and activated on next MC + * warm reboot. A cold reboot resets the override. It is assumed that a + * sufficient number of PFs are available and that port mapping is valid for + * the new port mode, as the override does not affect PF configuration. + */ +#define MC_CMD_OVERRIDE_PORT_MODE 0x137 +#undef MC_CMD_0x137_PRIVILEGE_CTG + +#define MC_CMD_0x137_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_OVERRIDE_PORT_MODE_IN msgrequest */ +#define MC_CMD_OVERRIDE_PORT_MODE_IN_LEN 8 +#define MC_CMD_OVERRIDE_PORT_MODE_IN_FLAGS_OFST 0 +#define MC_CMD_OVERRIDE_PORT_MODE_IN_FLAGS_LEN 4 +#define MC_CMD_OVERRIDE_PORT_MODE_IN_ENABLE_LBN 0 +#define MC_CMD_OVERRIDE_PORT_MODE_IN_ENABLE_WIDTH 1 +/* New mode (TLV_PORT_MODE_*) to set, if override enabled */ +#define MC_CMD_OVERRIDE_PORT_MODE_IN_MODE_OFST 4 +#define MC_CMD_OVERRIDE_PORT_MODE_IN_MODE_LEN 4 + +/* MC_CMD_OVERRIDE_PORT_MODE_OUT msgresponse */ +#define MC_CMD_OVERRIDE_PORT_MODE_OUT_LEN 0 + /***********************************/ /* MC_CMD_READ_ATB @@ -15145,12 +15831,14 @@ /* MC_CMD_XPM_READ_BYTES_OUT msgresponse */ #define MC_CMD_XPM_READ_BYTES_OUT_LENMIN 0 #define MC_CMD_XPM_READ_BYTES_OUT_LENMAX 252 +#define MC_CMD_XPM_READ_BYTES_OUT_LENMAX_MCDI2 1020 #define MC_CMD_XPM_READ_BYTES_OUT_LEN(num) (0+1*(num)) /* Data */ #define MC_CMD_XPM_READ_BYTES_OUT_DATA_OFST 0 #define MC_CMD_XPM_READ_BYTES_OUT_DATA_LEN 1 #define MC_CMD_XPM_READ_BYTES_OUT_DATA_MINNUM 0 #define MC_CMD_XPM_READ_BYTES_OUT_DATA_MAXNUM 252 +#define MC_CMD_XPM_READ_BYTES_OUT_DATA_MAXNUM_MCDI2 1020 /***********************************/ @@ -15165,6 +15853,7 @@ /* MC_CMD_XPM_WRITE_BYTES_IN msgrequest */ #define MC_CMD_XPM_WRITE_BYTES_IN_LENMIN 8 #define MC_CMD_XPM_WRITE_BYTES_IN_LENMAX 252 +#define MC_CMD_XPM_WRITE_BYTES_IN_LENMAX_MCDI2 1020 #define MC_CMD_XPM_WRITE_BYTES_IN_LEN(num) (8+1*(num)) /* Start address (byte) */ #define MC_CMD_XPM_WRITE_BYTES_IN_ADDR_OFST 0 @@ -15177,6 +15866,7 @@ #define MC_CMD_XPM_WRITE_BYTES_IN_DATA_LEN 1 #define MC_CMD_XPM_WRITE_BYTES_IN_DATA_MINNUM 0 #define MC_CMD_XPM_WRITE_BYTES_IN_DATA_MAXNUM 244 +#define MC_CMD_XPM_WRITE_BYTES_IN_DATA_MAXNUM_MCDI2 1012 /* MC_CMD_XPM_WRITE_BYTES_OUT msgresponse */ #define MC_CMD_XPM_WRITE_BYTES_OUT_LEN 0 @@ -15203,6 +15893,7 @@ /* MC_CMD_XPM_READ_SECTOR_OUT msgresponse */ #define MC_CMD_XPM_READ_SECTOR_OUT_LENMIN 4 #define MC_CMD_XPM_READ_SECTOR_OUT_LENMAX 36 +#define MC_CMD_XPM_READ_SECTOR_OUT_LENMAX_MCDI2 36 #define MC_CMD_XPM_READ_SECTOR_OUT_LEN(num) (4+1*(num)) /* Sector type */ #define MC_CMD_XPM_READ_SECTOR_OUT_TYPE_OFST 0 @@ -15217,6 +15908,7 @@ #define MC_CMD_XPM_READ_SECTOR_OUT_DATA_LEN 1 #define MC_CMD_XPM_READ_SECTOR_OUT_DATA_MINNUM 0 #define MC_CMD_XPM_READ_SECTOR_OUT_DATA_MAXNUM 32 +#define MC_CMD_XPM_READ_SECTOR_OUT_DATA_MAXNUM_MCDI2 32 /***********************************/ @@ -15231,6 +15923,7 @@ /* MC_CMD_XPM_WRITE_SECTOR_IN msgrequest */ #define MC_CMD_XPM_WRITE_SECTOR_IN_LENMIN 12 #define MC_CMD_XPM_WRITE_SECTOR_IN_LENMAX 44 +#define MC_CMD_XPM_WRITE_SECTOR_IN_LENMAX_MCDI2 44 #define MC_CMD_XPM_WRITE_SECTOR_IN_LEN(num) (12+1*(num)) /* If writing fails due to an uncorrectable error, try up to RETRIES following * sectors (or until no more space available). If 0, only one write attempt is @@ -15254,6 +15947,7 @@ #define MC_CMD_XPM_WRITE_SECTOR_IN_DATA_LEN 1 #define MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MINNUM 0 #define MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MAXNUM 32 +#define MC_CMD_XPM_WRITE_SECTOR_IN_DATA_MAXNUM_MCDI2 32 /* MC_CMD_XPM_WRITE_SECTOR_OUT msgresponse */ #define MC_CMD_XPM_WRITE_SECTOR_OUT_LEN 4 @@ -15302,6 +15996,7 @@ /* MC_CMD_XPM_BLANK_CHECK_OUT msgresponse */ #define MC_CMD_XPM_BLANK_CHECK_OUT_LENMIN 4 #define MC_CMD_XPM_BLANK_CHECK_OUT_LENMAX 252 +#define MC_CMD_XPM_BLANK_CHECK_OUT_LENMAX_MCDI2 1020 #define MC_CMD_XPM_BLANK_CHECK_OUT_LEN(num) (4+2*(num)) /* Total number of bad (non-blank) locations */ #define MC_CMD_XPM_BLANK_CHECK_OUT_BAD_COUNT_OFST 0 @@ -15313,6 +16008,7 @@ #define MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_LEN 2 #define MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MINNUM 0 #define MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MAXNUM 124 +#define MC_CMD_XPM_BLANK_CHECK_OUT_BAD_ADDR_MAXNUM_MCDI2 508 /***********************************/ @@ -15648,12 +16344,14 @@ /* MC_CMD_GET_SECURITY_RULESET_VERSION_OUT msgresponse */ #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMIN 1 #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMAX 252 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LENMAX_MCDI2 1020 #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_LEN(num) (0+1*(num)) /* Opaque hash value; length may vary depending on the hash scheme used */ #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_OFST 0 #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_LEN 1 #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MINNUM 1 #define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MAXNUM 252 +#define MC_CMD_GET_SECURITY_RULESET_VERSION_OUT_VERSION_MAXNUM_MCDI2 1020 /***********************************/ @@ -15678,6 +16376,7 @@ /* MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT msgresponse */ #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMIN 4 #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMAX 252 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LENMAX_MCDI2 1020 #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_LEN(num) (4+4*(num)) /* the number of new counter IDs allocated (may be less than the number * requested if resources are unavailable) @@ -15689,6 +16388,7 @@ #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_LEN 4 #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MINNUM 0 #define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MAXNUM 62 +#define MC_CMD_SECURITY_RULE_COUNTER_ALLOC_OUT_COUNTER_ID_MAXNUM_MCDI2 254 /***********************************/ @@ -15707,6 +16407,7 @@ /* MC_CMD_SECURITY_RULE_COUNTER_FREE_IN msgrequest */ #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMIN 4 #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMAX 252 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LENMAX_MCDI2 1020 #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_LEN(num) (4+4*(num)) /* the number of counter IDs to free */ #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_NUM_COUNTERS_OFST 0 @@ -15716,6 +16417,7 @@ #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_LEN 4 #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MINNUM 0 #define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MAXNUM 62 +#define MC_CMD_SECURITY_RULE_COUNTER_FREE_IN_COUNTER_ID_MAXNUM_MCDI2 254 /* MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT msgresponse */ #define MC_CMD_SECURITY_RULE_COUNTER_FREE_OUT_LEN 0 @@ -15739,6 +16441,7 @@ /* MC_CMD_SUBNET_MAP_SET_NODE_IN msgrequest */ #define MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMIN 6 #define MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMAX 252 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_LENMAX_MCDI2 1020 #define MC_CMD_SUBNET_MAP_SET_NODE_IN_LEN(num) (4+2*(num)) /* node to update in the range 0 .. SUBNET_MAP_NUM_NODES-1 */ #define MC_CMD_SUBNET_MAP_SET_NODE_IN_NODE_ID_OFST 0 @@ -15752,6 +16455,7 @@ #define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_LEN 2 #define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MINNUM 1 #define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MAXNUM 124 +#define MC_CMD_SUBNET_MAP_SET_NODE_IN_ENTRY_MAXNUM_MCDI2 508 /* MC_CMD_SUBNET_MAP_SET_NODE_OUT msgresponse */ #define MC_CMD_SUBNET_MAP_SET_NODE_OUT_LEN 0 @@ -15791,6 +16495,7 @@ /* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN msgrequest */ #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4 #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LENMAX_MCDI2 1020 #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num)) /* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a * PORTRANGE_TREE_ENTRY @@ -15799,6 +16504,7 @@ #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4 #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1 #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63 +#define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM_MCDI2 255 /* MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT msgresponse */ #define MC_CMD_REMOTE_PORTRANGE_MAP_SET_TREE_OUT_LEN 0 @@ -15822,6 +16528,7 @@ /* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN msgrequest */ #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMIN 4 #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMAX 252 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LENMAX_MCDI2 1020 #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_LEN(num) (0+4*(num)) /* PORTRANGE_TREE_NUM_ENTRIES new entries, each laid out as a * PORTRANGE_TREE_ENTRY @@ -15830,6 +16537,7 @@ #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_LEN 4 #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MINNUM 1 #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM 63 +#define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_IN_ENTRIES_MAXNUM_MCDI2 255 /* MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT msgresponse */ #define MC_CMD_LOCAL_PORTRANGE_MAP_SET_TREE_OUT_LEN 0 @@ -15872,6 +16580,7 @@ /* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN msgrequest */ #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMIN 4 #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMAX 68 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LENMAX_MCDI2 68 #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_LEN(num) (4+4*(num)) /* Flags */ #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_FLAGS_OFST 0 @@ -15888,6 +16597,7 @@ #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_LEN 4 #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MINNUM 0 #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MAXNUM 16 +#define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_IN_ENTRIES_MAXNUM_MCDI2 16 /* MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT msgresponse */ #define MC_CMD_SET_TUNNEL_ENCAP_UDP_PORTS_OUT_LEN 2 @@ -16014,6 +16724,7 @@ /* MC_CMD_TSA_BIND_IN_SET_KEY msgrequest */ #define MC_CMD_TSA_BIND_IN_SET_KEY_LENMIN 5 #define MC_CMD_TSA_BIND_IN_SET_KEY_LENMAX 252 +#define MC_CMD_TSA_BIND_IN_SET_KEY_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_IN_SET_KEY_LEN(num) (4+1*(num)) /* The operation requested. */ #define MC_CMD_TSA_BIND_IN_SET_KEY_OP_OFST 0 @@ -16028,6 +16739,7 @@ #define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_LEN 1 #define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MINNUM 1 #define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MAXNUM 248 +#define MC_CMD_TSA_BIND_IN_SET_KEY_DATKEY_MAXNUM_MCDI2 1016 /* MC_CMD_TSA_BIND_IN_UNBIND msgrequest: Request an insecure unbinding * operation. @@ -16045,6 +16757,7 @@ */ #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMIN 93 #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMAX 252 +#define MC_CMD_TSA_BIND_IN_UNBIND_EXT_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_LEN(num) (92+1*(num)) /* The operation requested. */ #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_OP_OFST 0 @@ -16082,6 +16795,7 @@ #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_LEN 1 #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MINNUM 1 #define MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MAXNUM 160 +#define MC_CMD_TSA_BIND_IN_UNBIND_EXT_SIG_MAXNUM_MCDI2 928 /* MC_CMD_TSA_BIND_IN_SET_UNBINDTOKEN msgrequest */ #define MC_CMD_TSA_BIND_IN_SET_UNBINDTOKEN_LEN 20 @@ -16106,6 +16820,7 @@ */ #define MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMIN 109 #define MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMAX 252 +#define MC_CMD_TSA_BIND_IN_DECOMMISSION_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_IN_DECOMMISSION_LEN(num) (108+1*(num)) /* This is the signature of the above mentioned fields- TSAID, USER and REASON. * As per current requirements, the SIG opaque data blob contains ECDSA ECC-384 @@ -16118,6 +16833,7 @@ #define MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_LEN 1 #define MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MINNUM 1 #define MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MAXNUM 144 +#define MC_CMD_TSA_BIND_IN_DECOMMISSION_SIG_MAXNUM_MCDI2 912 /* The operation requested. */ #define MC_CMD_TSA_BIND_IN_DECOMMISSION_OP_OFST 0 #define MC_CMD_TSA_BIND_IN_DECOMMISSION_OP_LEN 4 @@ -16170,6 +16886,7 @@ */ #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMIN 97 #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMAX 200 +#define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LENMAX_MCDI2 200 #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_LEN(num) (96+1*(num)) /* The operation requested, must be MC_CMD_TSA_BIND_OP_SECURE_UNBIND. */ #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_OP_OFST 0 @@ -16205,12 +16922,14 @@ #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_LEN 1 #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MINNUM 1 #define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MAXNUM 104 +#define MC_CMD_TSA_BIND_IN_SECURE_UNBIND_SIG_MAXNUM_MCDI2 104 /* MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION msgrequest: Request a secure * decommissioning operation. */ #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMIN 113 #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMAX 216 +#define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LENMAX_MCDI2 216 #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_LEN(num) (112+1*(num)) /* The operation requested, must be MC_CMD_TSA_BIND_OP_SECURE_DECOMMISSION. */ #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_OP_OFST 0 @@ -16249,6 +16968,7 @@ #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_LEN 1 #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MINNUM 1 #define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MAXNUM 104 +#define MC_CMD_TSA_BIND_IN_SECURE_DECOMMISSION_SIG_MAXNUM_MCDI2 104 /* MC_CMD_TSA_BIND_IN_TEST_MCDI msgrequest: Test mode that emulates MCDI * interface restrictions of a bound adapter. This operation is intended for @@ -16271,6 +16991,7 @@ */ #define MC_CMD_TSA_BIND_OUT_GET_ID_LENMIN 15 #define MC_CMD_TSA_BIND_OUT_GET_ID_LENMAX 252 +#define MC_CMD_TSA_BIND_OUT_GET_ID_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_OUT_GET_ID_LEN(num) (14+1*(num)) /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_ID that is sent back to * the caller. @@ -16302,10 +17023,12 @@ #define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_LEN 1 #define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MINNUM 1 #define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MAXNUM 238 +#define MC_CMD_TSA_BIND_OUT_GET_ID_SIG_MAXNUM_MCDI2 1006 /* MC_CMD_TSA_BIND_OUT_GET_TICKET msgresponse */ #define MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMIN 5 #define MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMAX 252 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_OUT_GET_TICKET_LEN(num) (4+1*(num)) /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_TICKET that is sent back * to the caller. @@ -16320,6 +17043,7 @@ #define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_LEN 1 #define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MINNUM 1 #define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MAXNUM 248 +#define MC_CMD_TSA_BIND_OUT_GET_TICKET_TICKET_MAXNUM_MCDI2 1016 /* MC_CMD_TSA_BIND_OUT_SET_KEY msgresponse */ #define MC_CMD_TSA_BIND_OUT_SET_KEY_LEN 4 @@ -16391,6 +17115,7 @@ /* MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE msgresponse */ #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMIN 9 #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMAX 252 +#define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LENMAX_MCDI2 1020 #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_LEN(num) (8+1*(num)) /* The protocol operation code MC_CMD_TSA_BIND_OP_GET_CERTIFICATE that is sent * back to the caller. @@ -16407,6 +17132,7 @@ #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_LEN 1 #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MINNUM 1 #define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MAXNUM 244 +#define MC_CMD_TSA_BIND_OUT_GET_CERTIFICATE_DATA_MAXNUM_MCDI2 1012 /* MC_CMD_TSA_BIND_OUT_SECURE_UNBIND msgresponse: Response to secure unbind * request. @@ -16501,6 +17227,7 @@ /* MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT msgresponse */ #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMIN 5 #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMAX 252 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LENMAX_MCDI2 1020 #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_LEN(num) (4+1*(num)) /* indicates whether the persistent cache is valid (after completion of the * requested operation in the case of rollback, commit, or invalidate) @@ -16521,6 +17248,7 @@ #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_LEN 1 #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MINNUM 1 #define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MAXNUM 248 +#define MC_CMD_MANAGE_SECURITY_RULESET_CACHE_OUT_VERSION_MAXNUM_MCDI2 1016 /***********************************/ @@ -16536,6 +17264,7 @@ /* MC_CMD_NVRAM_PRIVATE_APPEND_IN msgrequest */ #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMIN 9 #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMAX 252 +#define MC_CMD_NVRAM_PRIVATE_APPEND_IN_LENMAX_MCDI2 1020 #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_LEN(num) (8+1*(num)) /* The tag to be appended */ #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_TAG_OFST 0 @@ -16548,6 +17277,7 @@ #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_LEN 1 #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MINNUM 1 #define MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MAXNUM 244 +#define MC_CMD_NVRAM_PRIVATE_APPEND_IN_DATA_BUFFER_MAXNUM_MCDI2 1012 /* MC_CMD_NVRAM_PRIVATE_APPEND_OUT msgresponse */ #define MC_CMD_NVRAM_PRIVATE_APPEND_OUT_LEN 0 @@ -16573,6 +17303,7 @@ /* MC_CMD_XPM_VERIFY_CONTENTS_OUT msgresponse */ #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMIN 12 #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMAX 252 +#define MC_CMD_XPM_VERIFY_CONTENTS_OUT_LENMAX_MCDI2 1020 #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_LEN(num) (12+1*(num)) /* Number of sectors found (test builds only) */ #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_NUM_SECTORS_OFST 0 @@ -16588,6 +17319,7 @@ #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_LEN 1 #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MINNUM 0 #define MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MAXNUM 240 +#define MC_CMD_XPM_VERIFY_CONTENTS_OUT_SIGNATURE_MAXNUM_MCDI2 1008 /***********************************/ @@ -16969,6 +17701,8 @@ * match any black/white-list filters and was denied by the default filter */ #define MC_CMD_TSA_INFO_OP_PKT_SAMPLE 0x2 +/* enum: Information about an unbind or decommission attempt. */ +#define MC_CMD_TSA_INFO_OP_UNBIND 0x3 /* MC_CMD_TSA_INFO_IN_LOCAL_IP msgrequest: * @@ -17073,6 +17807,34 @@ #define MC_CMD_TSA_INFO_IN_PKT_SAMPLE_PACKET_DATA_LEN 1 #define MC_CMD_TSA_INFO_IN_PKT_SAMPLE_PACKET_DATA_NUM 128 +/* MC_CMD_TSA_INFO_IN_UNBIND msgrequest: Information about an unbind or + * decommission attempt. The purpose of this event is to let the controller + * know about unbind and decommission attempts (both successful and failed) + * received from the adapter host. The event is not sent if the unbind or + * decommission request was received from the controller. + */ +#define MC_CMD_TSA_INFO_IN_UNBIND_LEN 12 +#define MC_CMD_TSA_INFO_IN_UNBIND_OP_HDR_OFST 0 +#define MC_CMD_TSA_INFO_IN_UNBIND_OP_HDR_LEN 4 +#define MC_CMD_TSA_INFO_IN_UNBIND_OP_LBN 0 +#define MC_CMD_TSA_INFO_IN_UNBIND_OP_WIDTH 16 +/* Type of the unbind attempt. */ +#define MC_CMD_TSA_INFO_IN_UNBIND_TYPE_OFST 4 +#define MC_CMD_TSA_INFO_IN_UNBIND_TYPE_LEN 4 +/* enum: This event is sent because MC_CMD_TSA_BIND_OP_SECURE_UNBIND was + * received from the adapter local host. + */ +#define MC_CMD_TSA_INFO_UNBIND_TYPE_SECURE_UNBIND 0x1 +/* enum: This event is sent because MC_CMD_TSA_BIND_OP_SECURE_DECOMMISSION was + * received from the adapter local host. + */ +#define MC_CMD_TSA_INFO_UNBIND_TYPE_SECURE_DECOMMISSION 0x2 +/* Result of the attempt. */ +#define MC_CMD_TSA_INFO_IN_UNBIND_RESULT_OFST 8 +#define MC_CMD_TSA_INFO_IN_UNBIND_RESULT_LEN 4 +/* Enum values, see field(s): */ +/* MC_CMD_TSA_BIND/MC_CMD_TSA_BIND_OUT_SECURE_UNBIND/RESULT */ + /* MC_CMD_TSA_INFO_OUT msgresponse */ #define MC_CMD_TSA_INFO_OUT_LEN 0 @@ -17281,6 +18043,7 @@ /* MC_CMD_TSA_STATISTICS_IN_READ_CLEAR msgrequest */ #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMIN 20 #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMAX 252 +#define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LENMAX_MCDI2 1020 #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_LEN(num) (16+4*(num)) /* TSA statistics sub-operation code */ #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_OP_CODE_OFST 0 @@ -17315,10 +18078,12 @@ #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_LEN 4 #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MINNUM 1 #define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MAXNUM 59 +#define MC_CMD_TSA_STATISTICS_IN_READ_CLEAR_COUNTER_ID_MAXNUM_MCDI2 251 /* MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR msgresponse */ #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMIN 24 #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMAX 248 +#define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LENMAX_MCDI2 1016 #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_LEN(num) (8+16*(num)) /* Number of statistics counters returned in this response */ #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_NUM_STATS_OFST 0 @@ -17330,6 +18095,7 @@ #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_LEN 16 #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MINNUM 1 #define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MAXNUM 15 +#define MC_CMD_TSA_STATISTICS_OUT_READ_CLEAR_STATS_COUNTERS_MAXNUM_MCDI2 63 /* MC_TSA_STATISTICS_ENTRY structuredef */ #define MC_TSA_STATISTICS_ENTRY_LEN 16 @@ -17399,6 +18165,7 @@ /* MC_CMD_TSA_CONFIG_IN_APPEND msgrequest */ #define MC_CMD_TSA_CONFIG_IN_APPEND_LENMIN 12 #define MC_CMD_TSA_CONFIG_IN_APPEND_LENMAX 252 +#define MC_CMD_TSA_CONFIG_IN_APPEND_LENMAX_MCDI2 1020 #define MC_CMD_TSA_CONFIG_IN_APPEND_LEN(num) (12+1*(num)) /* TSA configuration sub-operation code. The value shall be * MC_CMD_TSA_CONFIG_OP_APPEND. @@ -17416,6 +18183,7 @@ #define MC_CMD_TSA_CONFIG_IN_APPEND_DATA_LEN 1 #define MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MINNUM 0 #define MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MAXNUM 240 +#define MC_CMD_TSA_CONFIG_IN_APPEND_DATA_MAXNUM_MCDI2 1008 /* MC_CMD_TSA_CONFIG_OUT_APPEND msgresponse */ #define MC_CMD_TSA_CONFIG_OUT_APPEND_LEN 0 @@ -17445,6 +18213,7 @@ /* MC_CMD_TSA_CONFIG_OUT_READ msgresponse */ #define MC_CMD_TSA_CONFIG_OUT_READ_LENMIN 8 #define MC_CMD_TSA_CONFIG_OUT_READ_LENMAX 252 +#define MC_CMD_TSA_CONFIG_OUT_READ_LENMAX_MCDI2 1020 #define MC_CMD_TSA_CONFIG_OUT_READ_LEN(num) (8+1*(num)) /* The tag that was read */ #define MC_CMD_TSA_CONFIG_OUT_READ_TAG_OFST 0 @@ -17457,6 +18226,7 @@ #define MC_CMD_TSA_CONFIG_OUT_READ_DATA_LEN 1 #define MC_CMD_TSA_CONFIG_OUT_READ_DATA_MINNUM 0 #define MC_CMD_TSA_CONFIG_OUT_READ_DATA_MAXNUM 244 +#define MC_CMD_TSA_CONFIG_OUT_READ_DATA_MAXNUM_MCDI2 1012 /* MC_TSA_IPV4_ITEM structuredef */ #define MC_TSA_IPV4_ITEM_LEN 8 @@ -17515,6 +18285,7 @@ /* MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4 msgrequest */ #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMIN 16 #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMAX 248 +#define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LENMAX_MCDI2 1016 #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_LEN(num) (8+8*(num)) /* Header containing information to identify which sub-operation of this * command to perform. The header contains a 16-bit op-code. Unused space in @@ -17534,6 +18305,7 @@ #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_HI_OFST 12 #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MINNUM 1 #define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MAXNUM 30 +#define MC_CMD_TSA_IPADDR_IN_VALIDATE_IPV4_IPV4_ITEM_MAXNUM_MCDI2 126 /* MC_CMD_TSA_IPADDR_OUT_VALIDATE_IPV4 msgresponse */ #define MC_CMD_TSA_IPADDR_OUT_VALIDATE_IPV4_LEN 0 @@ -17541,6 +18313,7 @@ /* MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4 msgrequest */ #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMIN 16 #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMAX 248 +#define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LENMAX_MCDI2 1016 #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_LEN(num) (8+8*(num)) /* Header containing information to identify which sub-operation of this * command to perform. The header contains a 16-bit op-code. Unused space in @@ -17560,6 +18333,7 @@ #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_HI_OFST 12 #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MINNUM 1 #define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MAXNUM 30 +#define MC_CMD_TSA_IPADDR_IN_REMOVE_IPV4_IPV4_ITEM_MAXNUM_MCDI2 126 /* MC_CMD_TSA_IPADDR_OUT_REMOVE_IPV4 msgresponse */ #define MC_CMD_TSA_IPADDR_OUT_REMOVE_IPV4_LEN 0 @@ -17989,6 +18763,7 @@ /* MC_CMD_GET_CERTIFICATE_OUT msgresponse */ #define MC_CMD_GET_CERTIFICATE_OUT_LENMIN 13 #define MC_CMD_GET_CERTIFICATE_OUT_LENMAX 252 +#define MC_CMD_GET_CERTIFICATE_OUT_LENMAX_MCDI2 1020 #define MC_CMD_GET_CERTIFICATE_OUT_LEN(num) (12+1*(num)) /* Type of the certificate. */ #define MC_CMD_GET_CERTIFICATE_OUT_TYPE_OFST 0 @@ -18008,6 +18783,7 @@ #define MC_CMD_GET_CERTIFICATE_OUT_DATA_LEN 1 #define MC_CMD_GET_CERTIFICATE_OUT_DATA_MINNUM 1 #define MC_CMD_GET_CERTIFICATE_OUT_DATA_MAXNUM 240 +#define MC_CMD_GET_CERTIFICATE_OUT_DATA_MAXNUM_MCDI2 1008 /***********************************/ @@ -18106,6 +18882,7 @@ /* MC_CMD_LTSSM_TRACE_POLL_OUT msgresponse */ #define MC_CMD_LTSSM_TRACE_POLL_OUT_LENMIN 16 #define MC_CMD_LTSSM_TRACE_POLL_OUT_LENMAX 248 +#define MC_CMD_LTSSM_TRACE_POLL_OUT_LENMAX_MCDI2 1016 #define MC_CMD_LTSSM_TRACE_POLL_OUT_LEN(num) (8+8*(num)) #define MC_CMD_LTSSM_TRACE_POLL_OUT_FLAGS_OFST 0 #define MC_CMD_LTSSM_TRACE_POLL_OUT_FLAGS_LEN 4 @@ -18124,6 +18901,7 @@ #define MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_HI_OFST 12 #define MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MINNUM 0 #define MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MAXNUM 30 +#define MC_CMD_LTSSM_TRACE_POLL_OUT_ROWS_MAXNUM_MCDI2 126 #define MC_CMD_LTSSM_TRACE_POLL_OUT_LTSSM_STATE_LBN 0 #define MC_CMD_LTSSM_TRACE_POLL_OUT_LTSSM_STATE_WIDTH 6 #define MC_CMD_LTSSM_TRACE_POLL_OUT_RDLH_LINK_UP_LBN 6 @@ -18140,5 +18918,205 @@ #define MC_CMD_LTSSM_TRACE_POLL_OUT_TIMESTAMP_US_OFST 12 #define MC_CMD_LTSSM_TRACE_POLL_OUT_TIMESTAMP_US_LEN 4 + +/***********************************/ +/* MC_CMD_TELEMETRY_ENABLE + * This command enables telemetry processing of packets, allowing a remote host + * to gather information and analytics passing on the card. Enabling telemetry + * will have a performance cost. Not supported on all hardware and datapath + * variants. As of writing, only supported on Medford2 running full-featured + * firmware variant. + */ +#define MC_CMD_TELEMETRY_ENABLE 0x138 +#undef MC_CMD_0x138_PRIVILEGE_CTG + +#define MC_CMD_0x138_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_TELEMETRY_ENABLE_IN msgrequest */ +#define MC_CMD_TELEMETRY_ENABLE_IN_LEN 4 +#define MC_CMD_TELEMETRY_ENABLE_IN_STATE_OFST 0 +#define MC_CMD_TELEMETRY_ENABLE_IN_STATE_LEN 4 +/* enum: Disables telemetry functionality, returns the card to default + * behaviour of the configured datapath variant. + */ +#define MC_CMD_TELEMETRY_ENABLE_IN_DISABLE 0x0 +/* enum: Enables telemetry functionality on the currently configured datapath + * variant if supported. + */ +#define MC_CMD_TELEMETRY_ENABLE_IN_ENABLE 0x1 + +/* MC_CMD_TELEMETRY_ENABLE_OUT msgresponse */ +#define MC_CMD_TELEMETRY_ENABLE_OUT_LEN 0 + +/* TELEMETRY_CONFIG structuredef */ +#define TELEMETRY_CONFIG_LEN 36 +/* Bitfields to identify the list of config parameters included in the command. + * A bit-value of 1 indicates that the relevant config parameter field is + * valid; 0 indicates invalid and the config parameter field must be ignored by + * firmware. Firmware may however apply some default values for certain + * parameters. + */ +#define TELEMETRY_CONFIG_FLAGS_OFST 0 +#define TELEMETRY_CONFIG_FLAGS_LEN 4 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_VALID_LBN 0 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_VALID_WIDTH 1 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_VALID_LBN 1 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_VALID_WIDTH 1 +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_VALID_LBN 2 +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_VALID_WIDTH 1 +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_VALID_LBN 3 +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_VALID_WIDTH 1 +#define TELEMETRY_CONFIG_RESERVED1_LBN 4 +#define TELEMETRY_CONFIG_RESERVED1_WIDTH 28 +#define TELEMETRY_CONFIG_FLAGS_LBN 0 +#define TELEMETRY_CONFIG_FLAGS_WIDTH 32 +/* Collector IPv4/IPv6 address to which latency measurements are forwarded from + * the adapter (as bytes in network order; set last 12 bytes to 0 for IPv4 + * address). + */ +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_OFST 4 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_LEN 16 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_LBN 32 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_IP_WIDTH 128 +/* Collector Port number to which latency measurements are forwarded from the + * adapter (as bytes in network order). + */ +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_OFST 20 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_LEN 2 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_LBN 160 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_PORT_WIDTH 16 +/* Unused - set to 0. */ +#define TELEMETRY_CONFIG_RESERVED2_OFST 22 +#define TELEMETRY_CONFIG_RESERVED2_LEN 2 +#define TELEMETRY_CONFIG_RESERVED2_LBN 176 +#define TELEMETRY_CONFIG_RESERVED2_WIDTH 16 +/* MAC address of the collector (as bytes in network order). */ +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_OFST 24 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_LEN 6 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_LBN 192 +#define TELEMETRY_CONFIG_METRICS_COLLECTOR_MAC_ADDR_WIDTH 48 +/* Maximum number of latency measurements to be made on a telemetry flow. */ +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_OFST 30 +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_LEN 2 +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_LBN 240 +#define TELEMETRY_CONFIG_MAX_METRICS_COUNT_WIDTH 16 +/* Maximum duration for which a telemetry flow is monitored (in millisecs). */ +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_OFST 32 +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_LEN 4 +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_LBN 256 +#define TELEMETRY_CONFIG_MONITOR_TIMEOUT_MS_WIDTH 32 + + +/***********************************/ +/* MC_CMD_TELEMETRY_CONFIG + * This top-level command includes various sub-opcodes that are used to apply + * (and read-back) telemetry related configuration parameters on the NIC. + * Reference - SF-120569-SW Telemetry Firmware Design. + */ +#define MC_CMD_TELEMETRY_CONFIG 0x139 +#undef MC_CMD_0x139_PRIVILEGE_CTG + +#define MC_CMD_0x139_PRIVILEGE_CTG SRIOV_CTG_ADMIN + +/* MC_CMD_TELEMETRY_CONFIG_IN msgrequest */ +#define MC_CMD_TELEMETRY_CONFIG_IN_LEN 4 +/* Telemetry configuration sub-operation code */ +#define MC_CMD_TELEMETRY_CONFIG_IN_OP_OFST 0 +#define MC_CMD_TELEMETRY_CONFIG_IN_OP_LEN 4 +/* enum: Configure parameters for telemetry measurements. */ +#define MC_CMD_TELEMETRY_CONFIG_OP_SET 0x1 +/* enum: Read current values of parameters for telemetry measurements. */ +#define MC_CMD_TELEMETRY_CONFIG_OP_GET 0x2 + +/* MC_CMD_TELEMETRY_CONFIG_IN_SET msgrequest: This command configures the + * parameters necessary for tcp-latency measurements. The adapter adds a filter + * for every new tcp flow seen in both tx and rx directions and tracks the + * telemetry measurements related to the flow in a tracking table. Entries in + * the tracking table live as long as N measurements are made on the flow or + * the flow has been in the tracking table for the maximum configured duration. + * Telemetry measurements in this command refer to tcp-latency measurements for + * data-to-ack latency as well as data-to-data latency. All telemetry + * measurements are bundled into a UDP packet and forwarded to a collector + * whose IP address is configured using this command. + */ +#define MC_CMD_TELEMETRY_CONFIG_IN_SET_LEN 40 +/* Telemetry configuration sub-operation code. Must be set to + * MC_CMD_TELEMETRY_CONFIG_OP_SET. + */ +#define MC_CMD_TELEMETRY_CONFIG_IN_SET_OP_OFST 0 +#define MC_CMD_TELEMETRY_CONFIG_IN_SET_OP_LEN 4 +/* struct of type TELEMETRY_CONFIG. */ +#define MC_CMD_TELEMETRY_CONFIG_IN_SET_PARAMETERS_OFST 4 +#define MC_CMD_TELEMETRY_CONFIG_IN_SET_PARAMETERS_LEN 36 + +/* MC_CMD_TELEMETRY_CONFIG_OUT_SET msgresponse */ +#define MC_CMD_TELEMETRY_CONFIG_OUT_SET_LEN 0 + +/* MC_CMD_TELEMETRY_CONFIG_IN_GET msgrequest: This command reads out the + * current values of config parameters necessary for tcp-latency measurements. + * See MC_CMD_TELEMETRY_SET_CONFIG for more information about the configuration + * parameters. + */ +#define MC_CMD_TELEMETRY_CONFIG_IN_GET_LEN 4 +/* Telemetry configuration sub-operation code. Must be set to + * MC_CMD_TELEMETRY_CONFIG_OP_GET. + */ +#define MC_CMD_TELEMETRY_CONFIG_IN_GET_OP_OFST 0 +#define MC_CMD_TELEMETRY_CONFIG_IN_GET_OP_LEN 4 + +/* MC_CMD_TELEMETRY_CONFIG_OUT_GET msgresponse */ +#define MC_CMD_TELEMETRY_CONFIG_OUT_GET_LEN 36 +/* struct of type TELEMETRY_CONFIG. */ +#define MC_CMD_TELEMETRY_CONFIG_OUT_GET_PARAMETERS_OFST 0 +#define MC_CMD_TELEMETRY_CONFIG_OUT_GET_PARAMETERS_LEN 36 + +/* EF100_MCDI_EVENT structuredef: The structure of an MCDI_EVENT on EF100 + * platforms + */ +#define EF100_MCDI_EVENT_LEN 8 +/* Defined by QMDA. Will be 1 for all SFC events */ +#define EF100_MCDI_EVENT_EV_DATA_FORMAT_LBN 0 +#define EF100_MCDI_EVENT_EV_DATA_FORMAT_WIDTH 1 +/* Defined by QMDA. The phase bit, changes each time round the event ring */ +#define EF100_MCDI_EVENT_EV_EVQ_PHASE_LBN 1 +#define EF100_MCDI_EVENT_EV_EVQ_PHASE_WIDTH 1 +/* Defined by QDMA. Meaning unclear. */ +#define EF100_MCDI_EVENT_EV_ERROR_LBN 2 +#define EF100_MCDI_EVENT_EV_ERROR_WIDTH 1 +/* Defined by QMDA. Indicates a descriptor was consumed. */ +#define EF100_MCDI_EVENT_EV_DESC_USED_LBN 3 +#define EF100_MCDI_EVENT_EV_DESC_USED_WIDTH 1 +/* Indicates the top-level type of the event. Event types are as documented in + * SF-119689-TC and defined in events.yml. For MCDI events it's always + * EF100_EV_MCDI. HW can generate other event type for its events. + */ +#define EF100_MCDI_EVENT_EV_TYPE_LBN 4 +#define EF100_MCDI_EVENT_EV_TYPE_WIDTH 4 +#define EF100_MCDI_EVENT_CODE_OFST 1 +#define EF100_MCDI_EVENT_CODE_LEN 1 +/* Enum values, see field(s): */ +/* MCDI_EVENT/CODE */ +#define EF100_MCDI_EVENT_CODE_LBN 8 +#define EF100_MCDI_EVENT_CODE_WIDTH 8 +/* Data associated with PTP events which doesn't fit into the main DATA field + */ +#define EF100_MCDI_EVENT_PTP_DATA_OFST 2 +#define EF100_MCDI_EVENT_PTP_DATA_LEN 1 +#define EF100_MCDI_EVENT_SRC_LBN 0 +#define EF100_MCDI_EVENT_SRC_WIDTH 8 +#define EF100_MCDI_EVENT_PTP_DATA_LBN 16 +#define EF100_MCDI_EVENT_PTP_DATA_WIDTH 8 +/* Set if this message continues into another event */ +#define EF100_MCDI_EVENT_CONT_LBN 24 +#define EF100_MCDI_EVENT_CONT_WIDTH 1 +#define EF100_MCDI_EVENT_LEVEL_LBN 25 +#define EF100_MCDI_EVENT_LEVEL_WIDTH 3 +/* Enum values, see field(s): */ +/* MCDI_EVENT/LEVEL */ +/* Data associated with this event. Format depends on the event code. */ +#define EF100_MCDI_EVENT_DATA_OFST 4 +#define EF100_MCDI_EVENT_DATA_LEN 4 +#define EF100_MCDI_EVENT_DATA_LBN 32 +#define EF100_MCDI_EVENT_DATA_WIDTH 32 + #endif /* _SIENA_MC_DRIVER_PCOL_H */ -/*! \cidoxg_end */ diff --git a/drivers/net/sfc/base/efx_regs_mcdi_aoe.h b/drivers/net/sfc/base/efx_regs_mcdi_aoe.h index 6aaf212f14..6bedfd71d9 100644 --- a/drivers/net/sfc/base/efx_regs_mcdi_aoe.h +++ b/drivers/net/sfc/base/efx_regs_mcdi_aoe.h @@ -4,7 +4,11 @@ * All rights reserved. */ -/*! \cidoxg_firmware_mc_cmd */ +/* + * This file is automatically generated. DO NOT EDIT IT. + * To make changes, edit the .yml files in sfregistry under doc/mcdi/ and + * rebuild this file with "make -C doc mcdiheaders". + */ #ifndef _SIENA_MC_DRIVER_PCOL_AOE_H #define _SIENA_MC_DRIVER_PCOL_AOE_H @@ -271,6 +275,7 @@ /* MC_CMD_FC_IN_WRITE32 msgrequest */ #define MC_CMD_FC_IN_WRITE32_LENMIN 16 #define MC_CMD_FC_IN_WRITE32_LENMAX 252 +#define MC_CMD_FC_IN_WRITE32_LENMAX_MCDI2 1020 #define MC_CMD_FC_IN_WRITE32_LEN(num) (12+4*(num)) /* MC_CMD_FC_IN_CMD_OFST 0 */ /* MC_CMD_FC_IN_CMD_LEN 4 */ @@ -282,6 +287,7 @@ #define MC_CMD_FC_IN_WRITE32_BUFFER_LEN 4 #define MC_CMD_FC_IN_WRITE32_BUFFER_MINNUM 1 #define MC_CMD_FC_IN_WRITE32_BUFFER_MAXNUM 60 +#define MC_CMD_FC_IN_WRITE32_BUFFER_MAXNUM_MCDI2 252 /* MC_CMD_FC_IN_TRC_READ msgrequest */ #define MC_CMD_FC_IN_TRC_READ_LEN 12 @@ -517,6 +523,7 @@ /* MC_CMD_FC_IN_IO_REL_WRITE32 msgrequest */ #define MC_CMD_FC_IN_IO_REL_WRITE32_LENMIN 20 #define MC_CMD_FC_IN_IO_REL_WRITE32_LENMAX 252 +#define MC_CMD_FC_IN_IO_REL_WRITE32_LENMAX_MCDI2 1020 #define MC_CMD_FC_IN_IO_REL_WRITE32_LEN(num) (16+4*(num)) /* MC_CMD_FC_IN_CMD_OFST 0 */ /* MC_CMD_FC_IN_CMD_LEN 4 */ @@ -530,6 +537,7 @@ #define MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_LEN 4 #define MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MINNUM 1 #define MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MAXNUM 59 +#define MC_CMD_FC_IN_IO_REL_WRITE32_BUFFER_MAXNUM_MCDI2 251 /* MC_CMD_FC_IN_UHLINK msgrequest */ #define MC_CMD_FC_IN_UHLINK_LEN 8 @@ -1021,6 +1029,7 @@ /* MC_CMD_FC_IN_SPI_WRITE msgrequest */ #define MC_CMD_FC_IN_SPI_WRITE_LENMIN 16 #define MC_CMD_FC_IN_SPI_WRITE_LENMAX 252 +#define MC_CMD_FC_IN_SPI_WRITE_LENMAX_MCDI2 1020 #define MC_CMD_FC_IN_SPI_WRITE_LEN(num) (12+4*(num)) /* MC_CMD_FC_IN_CMD_OFST 0 */ /* MC_CMD_FC_IN_CMD_LEN 4 */ @@ -1032,6 +1041,7 @@ #define MC_CMD_FC_IN_SPI_WRITE_BUFFER_LEN 4 #define MC_CMD_FC_IN_SPI_WRITE_BUFFER_MINNUM 1 #define MC_CMD_FC_IN_SPI_WRITE_BUFFER_MAXNUM 60 +#define MC_CMD_FC_IN_SPI_WRITE_BUFFER_MAXNUM_MCDI2 252 /* MC_CMD_FC_IN_SPI_ERASE msgrequest */ #define MC_CMD_FC_IN_SPI_ERASE_LEN 16 @@ -1244,11 +1254,13 @@ /* MC_CMD_FC_OUT_READ32 msgresponse */ #define MC_CMD_FC_OUT_READ32_LENMIN 4 #define MC_CMD_FC_OUT_READ32_LENMAX 252 +#define MC_CMD_FC_OUT_READ32_LENMAX_MCDI2 1020 #define MC_CMD_FC_OUT_READ32_LEN(num) (0+4*(num)) #define MC_CMD_FC_OUT_READ32_BUFFER_OFST 0 #define MC_CMD_FC_OUT_READ32_BUFFER_LEN 4 #define MC_CMD_FC_OUT_READ32_BUFFER_MINNUM 1 #define MC_CMD_FC_OUT_READ32_BUFFER_MAXNUM 63 +#define MC_CMD_FC_OUT_READ32_BUFFER_MAXNUM_MCDI2 255 /* MC_CMD_FC_OUT_WRITE32 msgresponse */ #define MC_CMD_FC_OUT_WRITE32_LEN 0 @@ -1856,11 +1868,13 @@ /* MC_CMD_FC_OUT_IO_REL_READ32 msgresponse */ #define MC_CMD_FC_OUT_IO_REL_READ32_LENMIN 4 #define MC_CMD_FC_OUT_IO_REL_READ32_LENMAX 252 +#define MC_CMD_FC_OUT_IO_REL_READ32_LENMAX_MCDI2 1020 #define MC_CMD_FC_OUT_IO_REL_READ32_LEN(num) (0+4*(num)) #define MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_OFST 0 #define MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_LEN 4 #define MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MINNUM 1 #define MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MAXNUM 63 +#define MC_CMD_FC_OUT_IO_REL_READ32_BUFFER_MAXNUM_MCDI2 255 /* MC_CMD_FC_OUT_IO_REL_WRITE32 msgresponse */ #define MC_CMD_FC_OUT_IO_REL_WRITE32_LEN 0 @@ -2011,12 +2025,14 @@ /* MC_CMD_FC_OUT_DMA_READ msgresponse */ #define MC_CMD_FC_OUT_DMA_READ_LENMIN 1 #define MC_CMD_FC_OUT_DMA_READ_LENMAX 252 +#define MC_CMD_FC_OUT_DMA_READ_LENMAX_MCDI2 1020 #define MC_CMD_FC_OUT_DMA_READ_LEN(num) (0+1*(num)) /* The data read */ #define MC_CMD_FC_OUT_DMA_READ_DATA_OFST 0 #define MC_CMD_FC_OUT_DMA_READ_DATA_LEN 1 #define MC_CMD_FC_OUT_DMA_READ_DATA_MINNUM 1 #define MC_CMD_FC_OUT_DMA_READ_DATA_MAXNUM 252 +#define MC_CMD_FC_OUT_DMA_READ_DATA_MAXNUM_MCDI2 1020 /* MC_CMD_FC_OUT_TIMED_READ_SET msgresponse */ #define MC_CMD_FC_OUT_TIMED_READ_SET_LEN 4 @@ -2110,6 +2126,7 @@ /* MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT msgresponse */ #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMIN 8 #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMAX 248 +#define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LENMAX_MCDI2 1016 #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_LEN(num) (0+8*(num)) #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_SECONDS_OFST 0 #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_SECONDS_LEN 4 @@ -2121,15 +2138,18 @@ #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_HI_OFST 4 #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MINNUM 0 #define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MAXNUM 31 +#define MC_CMD_FC_OUT_TIMESTAMP_READ_SNAPSHOT_TIMESTAMP_MAXNUM_MCDI2 127 /* MC_CMD_FC_OUT_SPI_READ msgresponse */ #define MC_CMD_FC_OUT_SPI_READ_LENMIN 4 #define MC_CMD_FC_OUT_SPI_READ_LENMAX 252 +#define MC_CMD_FC_OUT_SPI_READ_LENMAX_MCDI2 1020 #define MC_CMD_FC_OUT_SPI_READ_LEN(num) (0+4*(num)) #define MC_CMD_FC_OUT_SPI_READ_BUFFER_OFST 0 #define MC_CMD_FC_OUT_SPI_READ_BUFFER_LEN 4 #define MC_CMD_FC_OUT_SPI_READ_BUFFER_MINNUM 1 #define MC_CMD_FC_OUT_SPI_READ_BUFFER_MAXNUM 63 +#define MC_CMD_FC_OUT_SPI_READ_BUFFER_MAXNUM_MCDI2 255 /* MC_CMD_FC_OUT_SPI_WRITE msgresponse */ #define MC_CMD_FC_OUT_SPI_WRITE_LEN 0 @@ -2254,6 +2274,8 @@ #define MC_CMD_AOE_OP_GET_ASIC_PORTS 0x19 /* enum: Get FC assert information and register dump */ #define MC_CMD_AOE_OP_GET_FC_ASSERT_INFO 0x1a +/* enum: Set MUM startup FUSE byte with extended delay */ +#define MC_CMD_AOE_OP_MUM_STARTUP_FUSE 0x1b /* MC_CMD_AOE_OUT msgresponse */ #define MC_CMD_AOE_OUT_LEN 0 @@ -2409,6 +2431,7 @@ /* MC_CMD_AOE_IN_JTAG_WRITE msgrequest */ #define MC_CMD_AOE_IN_JTAG_WRITE_LENMIN 12 #define MC_CMD_AOE_IN_JTAG_WRITE_LENMAX 252 +#define MC_CMD_AOE_IN_JTAG_WRITE_LENMAX_MCDI2 1020 #define MC_CMD_AOE_IN_JTAG_WRITE_LEN(num) (8+4*(num)) /* MC_CMD_AOE_IN_CMD_OFST 0 */ /* MC_CMD_AOE_IN_CMD_LEN 4 */ @@ -2418,6 +2441,7 @@ #define MC_CMD_AOE_IN_JTAG_WRITE_DATA_LEN 4 #define MC_CMD_AOE_IN_JTAG_WRITE_DATA_MINNUM 1 #define MC_CMD_AOE_IN_JTAG_WRITE_DATA_MAXNUM 61 +#define MC_CMD_AOE_IN_JTAG_WRITE_DATA_MAXNUM_MCDI2 253 /* MC_CMD_AOE_IN_FPGA_ACCESS msgrequest */ #define MC_CMD_AOE_IN_FPGA_ACCESS_LEN 8 @@ -2575,6 +2599,17 @@ #define MC_CMD_AOE_IN_FC_BOOT_CONTROL_BOOT_ENABLE_LBN 0 #define MC_CMD_AOE_IN_FC_BOOT_CONTROL_BOOT_ENABLE_WIDTH 1 +/* MC_CMD_AOE_IN_MUM_STARTUP_FUSE msgrequest: On AOE2, set MUM startup FUSE + * byte with extended delay of 64ms. On some servers with noisy power rails, + * this ensures that the MUM IO pins do not show spurious transitions while the + * power rails are stabilising. Note that this operation requires a hard- + * powercycle to take effect. See bug76446. + */ +#define MC_CMD_AOE_IN_MUM_STARTUP_FUSE_LEN 4 +/* Must be MC_CMD_AOE_OP_MUM_STARTUP_FUSE */ +/* MC_CMD_AOE_IN_CMD_OFST 0 */ +/* MC_CMD_AOE_IN_CMD_LEN 4 */ + /* MC_CMD_AOE_OUT_GET_FC_ASSERT_INFO msgresponse */ #define MC_CMD_AOE_OUT_GET_FC_ASSERT_INFO_LEN 144 /* Assertion status flag. */ @@ -2757,12 +2792,14 @@ /* MC_CMD_AOE_OUT_FAN_FAILURES msgresponse */ #define MC_CMD_AOE_OUT_FAN_FAILURES_LENMIN 4 #define MC_CMD_AOE_OUT_FAN_FAILURES_LENMAX 252 +#define MC_CMD_AOE_OUT_FAN_FAILURES_LENMAX_MCDI2 1020 #define MC_CMD_AOE_OUT_FAN_FAILURES_LEN(num) (0+4*(num)) /* Failure counts for each fan */ #define MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_OFST 0 #define MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_LEN 4 #define MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MINNUM 1 #define MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MAXNUM 63 +#define MC_CMD_AOE_OUT_FAN_FAILURES_COUNT_MAXNUM_MCDI2 255 /* MC_CMD_AOE_OUT_CPLD_REPROGRAM msgresponse */ #define MC_CMD_AOE_OUT_CPLD_REPROGRAM_LEN 4 @@ -2795,6 +2832,7 @@ /* MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO msgresponse */ #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMIN 5 #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMAX 252 +#define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LENMAX_MCDI2 1020 #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_LEN(num) (4+1*(num)) /* in bytes */ #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATALEN_OFST 0 @@ -2803,10 +2841,12 @@ #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_LEN 1 #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MINNUM 1 #define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MAXNUM 248 +#define MC_CMD_AOE_OUT_GET_PHY_MEDIA_INFO_DATA_MAXNUM_MCDI2 1016 /* MC_CMD_AOE_OUT_JTAG_WRITE msgresponse */ #define MC_CMD_AOE_OUT_JTAG_WRITE_LENMIN 12 #define MC_CMD_AOE_OUT_JTAG_WRITE_LENMAX 252 +#define MC_CMD_AOE_OUT_JTAG_WRITE_LENMAX_MCDI2 1020 #define MC_CMD_AOE_OUT_JTAG_WRITE_LEN(num) (8+4*(num)) /* Used to align the in and out data blocks so the MC can re-use the cmd */ #define MC_CMD_AOE_OUT_JTAG_WRITE_DATALEN_OFST 0 @@ -2818,6 +2858,7 @@ #define MC_CMD_AOE_OUT_JTAG_WRITE_DATA_LEN 4 #define MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MINNUM 1 #define MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MAXNUM 61 +#define MC_CMD_AOE_OUT_JTAG_WRITE_DATA_MAXNUM_MCDI2 253 /* MC_CMD_AOE_OUT_FPGA_ACCESS msgresponse */ #define MC_CMD_AOE_OUT_FPGA_ACCESS_LEN 0 @@ -2825,6 +2866,7 @@ /* MC_CMD_AOE_OUT_DDR msgresponse */ #define MC_CMD_AOE_OUT_DDR_LENMIN 17 #define MC_CMD_AOE_OUT_DDR_LENMAX 252 +#define MC_CMD_AOE_OUT_DDR_LENMAX_MCDI2 1020 #define MC_CMD_AOE_OUT_DDR_LEN(num) (16+1*(num)) /* Information on the module. */ #define MC_CMD_AOE_OUT_DDR_FLAGS_OFST 0 @@ -2851,6 +2893,7 @@ #define MC_CMD_AOE_OUT_DDR_SPD_LEN 1 #define MC_CMD_AOE_OUT_DDR_SPD_MINNUM 1 #define MC_CMD_AOE_OUT_DDR_SPD_MAXNUM 236 +#define MC_CMD_AOE_OUT_DDR_SPD_MAXNUM_MCDI2 1004 /* MC_CMD_AOE_OUT_SET_MTU_OFFSET msgresponse */ #define MC_CMD_AOE_OUT_SET_MTU_OFFSET_LEN 0 @@ -2910,5 +2953,12 @@ /* MC_CMD_AOE_OUT_FC_BOOT msgresponse */ #define MC_CMD_AOE_OUT_FC_BOOT_LEN 0 +/* MC_CMD_AOE_OUT_MUM_STARTUP_FUSE msgresponse */ +#define MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_LEN 4 +/* Current value of startup FUSE byte (fusebyte#4) read back after the update + * operation. + */ +#define MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_READBACK_VALUE_OFST 0 +#define MC_CMD_AOE_OUT_MUM_STARTUP_FUSE_READBACK_VALUE_LEN 4 + #endif /* _SIENA_MC_DRIVER_PCOL_AOE_H */ -/*! \cidoxg_end */