From: Bing Zhao <bingz@nvidia.com>
Date: Mon, 26 Oct 2020 16:37:44 +0000 (+0800)
Subject: net/mlx5: add conditional hairpin auto bind
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=aa8bea0e3455bf4b741e7878b2fe44f800a25ed1;p=dpdk.git

net/mlx5: add conditional hairpin auto bind

In single port hairpin mode, after the queues are configured during
start up. The binding process will be enabled automatically in the
port start phase and the default control flow for egress will be
created.

When switching to two ports hairpin mode, the auto binding process
should be skipped if there is no TX queue with the peer RX queue on
the same device, and it should be skipped also if the queues are
configured with manual bind attribute.

If the explicit TX flow rule mode is configured or hairpin is
between two ports, the default control flows for TX queues should
not be created.

Signed-off-by: Bing Zhao <bingz@nvidia.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@nvidia.com>
---

diff --git a/drivers/net/mlx5/mlx5_trigger.c b/drivers/net/mlx5/mlx5_trigger.c
index cba736b4bc..f5fab0f19d 100644
--- a/drivers/net/mlx5/mlx5_trigger.c
+++ b/drivers/net/mlx5/mlx5_trigger.c
@@ -218,6 +218,8 @@ mlx5_hairpin_auto_bind(struct rte_eth_dev *dev)
 	struct mlx5_devx_obj *rq;
 	unsigned int i;
 	int ret = 0;
+	bool need_auto = false;
+	uint16_t self_port = dev->data->port_id;
 
 	for (i = 0; i != priv->txqs_n; ++i) {
 		txq_ctrl = mlx5_txq_get(dev, i);
@@ -227,6 +229,28 @@ mlx5_hairpin_auto_bind(struct rte_eth_dev *dev)
 			mlx5_txq_release(dev, i);
 			continue;
 		}
+		if (txq_ctrl->hairpin_conf.peers[0].port != self_port)
+			continue;
+		if (txq_ctrl->hairpin_conf.manual_bind) {
+			mlx5_txq_release(dev, i);
+			return 0;
+		}
+		need_auto = true;
+		mlx5_txq_release(dev, i);
+	}
+	if (!need_auto)
+		return 0;
+	for (i = 0; i != priv->txqs_n; ++i) {
+		txq_ctrl = mlx5_txq_get(dev, i);
+		if (!txq_ctrl)
+			continue;
+		if (txq_ctrl->type != MLX5_TXQ_TYPE_HAIRPIN) {
+			mlx5_txq_release(dev, i);
+			continue;
+		}
+		/* Skip hairpin queues with other peer ports. */
+		if (txq_ctrl->hairpin_conf.peers[0].port != self_port)
+			continue;
 		if (!txq_ctrl->obj) {
 			rte_errno = ENOMEM;
 			DRV_LOG(ERR, "port %u no txq object found: %d",
@@ -275,6 +299,9 @@ mlx5_hairpin_auto_bind(struct rte_eth_dev *dev)
 		ret = mlx5_devx_cmd_modify_rq(rq, &rq_attr);
 		if (ret)
 			goto error;
+		/* Qs with auto-bind will be destroyed directly. */
+		rxq_ctrl->hairpin_status = 1;
+		txq_ctrl->hairpin_status = 1;
 		mlx5_txq_release(dev, i);
 		mlx5_rxq_release(dev, txq_ctrl->hairpin_conf.peers[0].queue);
 	}
@@ -1050,9 +1077,13 @@ mlx5_dev_start(struct rte_eth_dev *dev)
 			dev->data->port_id, strerror(rte_errno));
 		goto error;
 	}
+	/*
+	 * Such step will be skipped if there is no hairpin TX queue configured
+	 * with RX peer queue from the same device.
+	 */
 	ret = mlx5_hairpin_auto_bind(dev);
 	if (ret) {
-		DRV_LOG(ERR, "port %u hairpin binding failed: %s",
+		DRV_LOG(ERR, "port %u hairpin auto binding failed: %s",
 			dev->data->port_id, strerror(rte_errno));
 		goto error;
 	}
@@ -1203,7 +1234,11 @@ mlx5_traffic_enable(struct rte_eth_dev *dev)
 		struct mlx5_txq_ctrl *txq_ctrl = mlx5_txq_get(dev, i);
 		if (!txq_ctrl)
 			continue;
-		if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN) {
+		/* Only Tx implicit mode requires the default Tx flow. */
+		if (txq_ctrl->type == MLX5_TXQ_TYPE_HAIRPIN &&
+		    txq_ctrl->hairpin_conf.tx_explicit == 0 &&
+		    txq_ctrl->hairpin_conf.peers[0].port ==
+		    priv->dev_data->port_id) {
 			ret = mlx5_ctrl_flow_source_queue(dev, i);
 			if (ret) {
 				mlx5_txq_release(dev, i);