From: David Marchand Date: Fri, 27 Nov 2020 15:07:10 +0000 (+0100) Subject: usertools: remove dpdk-setup.sh X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=b0a49787b48130ece898351a21a9e2026869278b;p=dpdk.git usertools: remove dpdk-setup.sh This old script relied on deprecated stuff, and especially make. It also applied some scary 666 permissions on files under /dev/vfio. Its deprecation had been notified in a previous release, remove it. Signed-off-by: David Marchand Acked-by: Bruce Richardson Acked-by: Thomas Monjalon Acked-by: Ferruh Yigit Acked-by: Maxime Coquelin --- diff --git a/doc/guides/bbdevs/acc100.rst b/doc/guides/bbdevs/acc100.rst index 9c37bc3be1..ff0fa4bf87 100644 --- a/doc/guides/bbdevs/acc100.rst +++ b/doc/guides/bbdevs/acc100.rst @@ -96,7 +96,7 @@ Bind PF UIO driver(s) Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver. -The igb_uio driver may be bound to the PF PCI device using one of three methods: +The igb_uio driver may be bound to the PF PCI device using one of two methods: 1. PCI functions (physical or virtual, depending on the use case) can be bound to @@ -120,19 +120,9 @@ the UIO driver by repeating this command for every function. where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d5c -3. A third way to bind is to use ``dpdk-setup.sh`` tool - -.. code-block:: console - - cd - ./usertools/dpdk-setup.sh - - select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module' - enter PCI device ID - select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding - In a similar way the ACC100 5G/4G FEC PF may be bound with vfio-pci as any PCIe device. + Enable Virtual Functions ~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/doc/guides/bbdevs/fpga_5gnr_fec.rst b/doc/guides/bbdevs/fpga_5gnr_fec.rst index 161f5e2ae4..9d71585e9e 100644 --- a/doc/guides/bbdevs/fpga_5gnr_fec.rst +++ b/doc/guides/bbdevs/fpga_5gnr_fec.rst @@ -82,7 +82,7 @@ Bind PF UIO driver(s) Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver. -The igb_uio driver may be bound to the PF PCI device using one of three methods: +The igb_uio driver may be bound to the PF PCI device using one of two methods: 1. PCI functions (physical or virtual, depending on the use case) can be bound to @@ -105,20 +105,6 @@ the UIO driver by repeating this command for every function. where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd8086:0d8f -3. A third way to bind is to use ``dpdk-setup.sh`` tool - -.. code-block:: console - - cd - ./usertools/dpdk-setup.sh - - select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module' - or - select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required - enter PCI device ID - select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding - - In the same way the FPGA 5GNR FEC PF can be bound with vfio, but vfio driver does not support SR-IOV configuration right out of the box, so it will need to be patched. diff --git a/doc/guides/bbdevs/fpga_lte_fec.rst b/doc/guides/bbdevs/fpga_lte_fec.rst index e268e5b9dc..c3379c24e3 100644 --- a/doc/guides/bbdevs/fpga_lte_fec.rst +++ b/doc/guides/bbdevs/fpga_lte_fec.rst @@ -81,7 +81,7 @@ Bind PF UIO driver(s) Install the DPDK igb_uio driver, bind it with the PF PCI device ID and use ``lspci`` to confirm the PF device is under use by ``igb_uio`` DPDK UIO driver. -The igb_uio driver may be bound to the PF PCI device using one of three methods: +The igb_uio driver may be bound to the PF PCI device using one of two methods: 1. PCI functions (physical or virtual, depending on the use case) can be bound to @@ -104,20 +104,6 @@ the UIO driver by repeating this command for every function. where the PCI device ID (example: 0000:06:00.0) is obtained using lspci -vd1172: -3. A third way to bind is to use ``dpdk-setup.sh`` tool - -.. code-block:: console - - cd - ./usertools/dpdk-setup.sh - - select 'Bind Ethernet/Crypto/Baseband device to IGB UIO module' - or - select 'Bind Ethernet/Crypto/Baseband device to VFIO module' depending on driver required - enter PCI device ID - select 'Display current Ethernet/Crypto/Baseband device settings' to confirm binding - - In the same way the FPGA LTE FEC PF can be bound with vfio, but vfio driver does not support SR-IOV configuration right out of the box, so it will need to be patched. diff --git a/doc/guides/faq/faq.rst b/doc/guides/faq/faq.rst index ee8c1697b4..2aec432d75 100644 --- a/doc/guides/faq/faq.rst +++ b/doc/guides/faq/faq.rst @@ -22,8 +22,7 @@ When you stop and restart the test application, it looks to see if the pages are If you look in the directory, you will see ``n`` number of 2M pages files. If you specified 1024, you will see 1024 page files. These are then placed in memory segments to get contiguous memory. -If you need to change the number of pages, it is easier to first remove the pages. The usertools/dpdk-setup.sh script provides an option to do this. -See the "Quick Start Setup Script" section in the :ref:`DPDK Getting Started Guide ` for more information. +If you need to change the number of pages, it is easier to first remove the pages. If I execute "l2fwd -l 0-3 -m 64 -n 3 -- -p 3", I get the following output, indicating that there are no socket 0 hugepages to allocate the mbuf and ring structures to? diff --git a/doc/guides/linux_gsg/build_dpdk.rst b/doc/guides/linux_gsg/build_dpdk.rst index 8ce0f23097..f78eef2517 100644 --- a/doc/guides/linux_gsg/build_dpdk.rst +++ b/doc/guides/linux_gsg/build_dpdk.rst @@ -6,11 +6,6 @@ Compiling the DPDK Target from Source ===================================== -.. note:: - - Parts of this process can also be done using the setup script described in - the :ref:`linux_setup_script` section of this document. - Uncompress DPDK and Browse Sources ---------------------------------- diff --git a/doc/guides/linux_gsg/build_sample_apps.rst b/doc/guides/linux_gsg/build_sample_apps.rst index 994db4b6a0..78652549a7 100644 --- a/doc/guides/linux_gsg/build_sample_apps.rst +++ b/doc/guides/linux_gsg/build_sample_apps.rst @@ -7,11 +7,6 @@ Running Sample Applications The chapter describes how to compile and run applications in a DPDK environment. It also provides a pointer to where sample applications are stored. -.. note:: - - Parts of this process can also be done using the setup script described the - :ref:`linux_setup_script` section of this document. - Compiling a Sample Application ------------------------------ diff --git a/doc/guides/linux_gsg/index.rst b/doc/guides/linux_gsg/index.rst index 0f9f6242c1..16a9a67260 100644 --- a/doc/guides/linux_gsg/index.rst +++ b/doc/guides/linux_gsg/index.rst @@ -18,5 +18,4 @@ Getting Started Guide for Linux build_sample_apps linux_eal_parameters enable_func - quick_start nic_perf_intel_platform diff --git a/doc/guides/linux_gsg/linux_drivers.rst b/doc/guides/linux_gsg/linux_drivers.rst index 2d750b4c33..65373f1448 100644 --- a/doc/guides/linux_gsg/linux_drivers.rst +++ b/doc/guides/linux_gsg/linux_drivers.rst @@ -107,7 +107,6 @@ Also, to use VFIO, both kernel and BIOS must support and be configured to use IO ``vfio-pci`` module doesn't support the creation of virtual functions before Linux version 5.7. For proper operation of VFIO when running DPDK applications as a non-privileged user, correct permissions should also be set up. -This can be done by using the DPDK setup script (called dpdk-setup.sh and located in the usertools directory). .. note:: diff --git a/doc/guides/linux_gsg/quick_start.rst b/doc/guides/linux_gsg/quick_start.rst deleted file mode 100644 index 181ec00ad4..0000000000 --- a/doc/guides/linux_gsg/quick_start.rst +++ /dev/null @@ -1,304 +0,0 @@ -.. SPDX-License-Identifier: BSD-3-Clause - Copyright(c) 2010-2014 Intel Corporation. - -.. _linux_setup_script: - -Quick Start Setup Script -======================== - -The dpdk-setup.sh script, found in the usertools subdirectory, allows the user to perform the following tasks: - -* Build the DPDK libraries - -* Insert and remove the DPDK IGB_UIO kernel module - -* Insert and remove VFIO kernel modules - -* Insert and remove the DPDK KNI kernel module - -* Create and delete hugepages for NUMA and non-NUMA cases - -* View network port status and reserve ports for DPDK application use - -* Set up permissions for using VFIO as a non-privileged user - -* Run the test and testpmd applications - -* Look at hugepages in the meminfo - -* List hugepages in ``/mnt/huge`` - -* Remove built DPDK libraries - -Once these steps have been completed for one of the EAL targets, -the user may compile their own application that links in the EAL libraries to create the DPDK image. - -Script Organization -------------------- - -The dpdk-setup.sh script is logically organized into a series of steps that a user performs in sequence. -Each step provides a number of options that guide the user to completing the desired task. -The following is a brief synopsis of each step. - -**Step 1: Build DPDK Libraries** - -Initially, the user must select a DPDK target to choose the correct target type and compiler options to use when building the libraries. - -The user must have all libraries, modules, updates and compilers installed in the system prior to this, -as described in the earlier chapters in this Getting Started Guide. - -**Step 2: Setup Environment** - -The user configures the Linux* environment to support the running of DPDK applications. -Hugepages can be set up for NUMA or non-NUMA systems. Any existing hugepages will be removed. -The DPDK kernel module that is needed can also be inserted in this step, -and network ports may be bound to this module for DPDK application use. - -**Step 3: Run an Application** - -The user may run the test application once the other steps have been performed. -The test application allows the user to run a series of functional tests for the DPDK. -The testpmd application, which supports the receiving and sending of packets, can also be run. - -**Step 4: Examining the System** - -This step provides some tools for examining the status of hugepage mappings. - -**Step 5: System Cleanup** - -The final step has options for restoring the system to its original state. - -Use Cases ---------- - -The following are some example of how to use the dpdk-setup.sh script. -The script should be run using the source command. -Some options in the script prompt the user for further data before proceeding. - -.. warning:: - - The dpdk-setup.sh script should be run with root privileges. - -.. code-block:: console - - source usertools/dpdk-setup.sh - - ------------------------------------------------------------------------ - - RTE_SDK exported as /home/user/rte - - ------------------------------------------------------------------------ - - Step 1: Select the DPDK environment to build - - ------------------------------------------------------------------------ - - [1] i686-native-linux-gcc - - [2] i686-native-linux-icc - - [3] ppc_64-power8-linux-gcc - - [4] x86_64-native-freebsd-clang - - [5] x86_64-native-freebsd-gcc - - [6] x86_64-native-linux-clang - - [7] x86_64-native-linux-gcc - - [8] x86_64-native-linux-icc - - ------------------------------------------------------------------------ - - Step 2: Setup linux environment - - ------------------------------------------------------------------------ - - [11] Insert IGB UIO module - - [12] Insert VFIO module - - [13] Insert KNI module - - [14] Setup hugepage mappings for non-NUMA systems - - [15] Setup hugepage mappings for NUMA systems - - [16] Display current Ethernet device settings - - [17] Bind Ethernet device to IGB UIO module - - [18] Bind Ethernet device to VFIO module - - [19] Setup VFIO permissions - - ------------------------------------------------------------------------ - - Step 3: Run test application for linux environment - - ------------------------------------------------------------------------ - - [20] Run test application ($RTE_TARGET/app/test) - - [21] Run testpmd application in interactive mode ($RTE_TARGET/app/testpmd) - - ------------------------------------------------------------------------ - - Step 4: Other tools - - ------------------------------------------------------------------------ - - [22] List hugepage info from /proc/meminfo - - ------------------------------------------------------------------------ - - Step 5: Uninstall and system cleanup - - ------------------------------------------------------------------------ - - [23] Uninstall all targets - - [24] Unbind NICs from IGB UIO driver - - [25] Remove IGB UIO module - - [26] Remove VFIO module - - [27] Remove KNI module - - [28] Remove hugepage mappings - - [29] Exit Script - -Option: - -The following selection demonstrates the creation of the ``x86_64-native-linux-gcc`` DPDK library. - -.. code-block:: console - - Option: 9 - - ================== Installing x86_64-native-linux-gcc - - Configuration done - == Build lib - ... - Build complete - RTE_TARGET exported as x86_64-native-linux-gcc - -The following selection demonstrates the starting of the DPDK UIO driver. - -.. code-block:: console - - Option: 25 - - Unloading any existing DPDK UIO module - Loading DPDK UIO module - -The following selection demonstrates the creation of hugepages in a NUMA system. -1024 2 MByte pages are assigned to each node. -The result is that the application should use -m 4096 for starting the application to access both memory areas -(this is done automatically if the -m option is not provided). - -.. note:: - - If prompts are displayed to remove temporary files, type 'y'. - -.. code-block:: console - - Option: 15 - - Removing currently reserved hugepages - mounting /mnt/huge and removing directory - Input the number of 2MB pages for each node - Example: to have 128MB of hugepages available per node, - enter '64' to reserve 64 * 2MB pages on each node - Number of pages for node0: 1024 - Number of pages for node1: 1024 - Reserving hugepages - Creating /mnt/huge and mounting as hugetlbfs - -The following selection demonstrates the launch of the test application to run on a single core. - -.. code-block:: console - - Option: 20 - - Enter hex bitmask of cores to execute test app on - Example: to execute app on cores 0 to 7, enter 0xff - bitmask: 0x01 - Launching app - EAL: coremask set to 1 - EAL: Detected lcore 0 on socket 0 - ... - EAL: Main core 0 is ready (tid=1b2ad720) - RTE>> - -Applications ------------- - -Once the user has run the dpdk-setup.sh script, built one of the EAL targets and set up hugepages (if using one of the Linux EAL targets), -the user can then move on to building and running their application or one of the examples provided. - -The examples in the /examples directory provide a good starting point to gain an understanding of the operation of the DPDK. -The following command sequence shows how the helloworld sample application is built and run. -As recommended in Section 4.2.1 , "Logical Core Use by Applications", -the logical core layout of the platform should be determined when selecting a core mask to use for an application. - -.. code-block:: console - - cd helloworld/ - make - CC main.o - LD helloworld - INSTALL-APP helloworld - INSTALL-MAP helloworld.map - - sudo ./build/app/helloworld -l 0-3 -n 3 - [sudo] password for rte: - - EAL: coremask set to f - EAL: Detected lcore 0 as core 0 on socket 0 - EAL: Detected lcore 1 as core 0 on socket 1 - EAL: Detected lcore 2 as core 1 on socket 0 - EAL: Detected lcore 3 as core 1 on socket 1 - EAL: Setting up hugepage memory... - EAL: Ask a virtual area of 0x200000 bytes - EAL: Virtual area found at 0x7f0add800000 (size = 0x200000) - EAL: Ask a virtual area of 0x3d400000 bytes - EAL: Virtual area found at 0x7f0aa0200000 (size = 0x3d400000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9fc00000 (size = 0x400000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9f600000 (size = 0x400000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9f000000 (size = 0x400000) - EAL: Ask a virtual area of 0x800000 bytes - EAL: Virtual area found at 0x7f0a9e600000 (size = 0x800000) - EAL: Ask a virtual area of 0x800000 bytes - EAL: Virtual area found at 0x7f0a9dc00000 (size = 0x800000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9d600000 (size = 0x400000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9d000000 (size = 0x400000) - EAL: Ask a virtual area of 0x400000 bytes - EAL: Virtual area found at 0x7f0a9ca00000 (size = 0x400000) - EAL: Ask a virtual area of 0x200000 bytes - EAL: Virtual area found at 0x7f0a9c600000 (size = 0x200000) - EAL: Ask a virtual area of 0x200000 bytes - EAL: Virtual area found at 0x7f0a9c200000 (size = 0x200000) - EAL: Ask a virtual area of 0x3fc00000 bytes - EAL: Virtual area found at 0x7f0a5c400000 (size = 0x3fc00000) - EAL: Ask a virtual area of 0x200000 bytes - EAL: Virtual area found at 0x7f0a5c000000 (size = 0x200000) - EAL: Requesting 1024 pages of size 2MB from socket 0 - EAL: Requesting 1024 pages of size 2MB from socket 1 - EAL: Main core 0 is ready (tid=de25b700) - EAL: Core 1 is ready (tid=5b7fe700) - EAL: Core 3 is ready (tid=5a7fc700) - EAL: Core 2 is ready (tid=5affd700) - hello from core 1 - hello from core 2 - hello from core 3 - hello from core 0 diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 1271a7cf28..f418285d28 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -100,8 +100,3 @@ Deprecation Notices * cmdline: ``cmdline`` structure will be made opaque to hide platform-specific content. On Linux and FreeBSD, supported prior to DPDK 20.11, original structure will be kept until DPDK 21.11. - -* dpdk-setup.sh: This old script relies on deprecated stuff, and especially - ``make``. Given environments are too much variables for such a simple script, - it will be removed in DPDK 20.11. - Some useful parts may be converted into specific scripts. diff --git a/doc/guides/rel_notes/release_20_11.rst b/doc/guides/rel_notes/release_20_11.rst index 24a078c995..7405a9864f 100644 --- a/doc/guides/rel_notes/release_20_11.rst +++ b/doc/guides/rel_notes/release_20_11.rst @@ -457,6 +457,8 @@ Removed Items * Removed TEP termination sample application. +* Removed the deprecated ``dpdk-setup.sh`` script. + API Changes ----------- diff --git a/usertools/dpdk-setup.sh b/usertools/dpdk-setup.sh deleted file mode 100755 index 411bf2e07f..0000000000 --- a/usertools/dpdk-setup.sh +++ /dev/null @@ -1,609 +0,0 @@ -#! /bin/bash -# SPDX-License-Identifier: BSD-3-Clause -# Copyright(c) 2010-2014 Intel Corporation - -# -# Run with "source /path/to/dpdk-setup.sh" -# - -# -# Change to DPDK directory ( /.. ), and export it as RTE_SDK -# -cd $(dirname ${BASH_SOURCE[0]})/.. -export RTE_SDK=$PWD -echo "------------------------------------------------------------------------------" -echo " RTE_SDK exported as $RTE_SDK" -echo "------------------------------------------------------------------------------" - -HUGEPGSZ=`cat /proc/meminfo | grep Hugepagesize | cut -d : -f 2 | tr -d ' '` - -# -# Application EAL parameters for setting memory options (amount/channels/ranks). -# -EAL_PARAMS='-n 4' - -# -# Sets QUIT variable so script will finish. -# -quit() -{ - QUIT=$1 -} - -# Shortcut for quit. -q() -{ - quit -} - -# -# Sets up environmental variables for ICC. -# -setup_icc() -{ - DEFAULT_PATH=/opt/intel/bin/iccvars.sh - param=$1 - shpath=`which iccvars.sh 2> /dev/null` - if [ $? -eq 0 ] ; then - echo "Loading iccvars.sh from $shpath for $param" - source $shpath $param - elif [ -f $DEFAULT_PATH ] ; then - echo "Loading iccvars.sh from $DEFAULT_PATH for $param" - source $DEFAULT_PATH $param - else - echo "## ERROR: cannot find 'iccvars.sh' script to set up ICC." - echo "## To fix, please add the directory that contains" - echo "## iccvars.sh to your 'PATH' environment variable." - quit - fi -} - -# -# Sets RTE_TARGET and does a "make install". -# -setup_target() -{ - option=$1 - export RTE_TARGET=${TARGETS[option]} - - compiler=${RTE_TARGET##*-} - if [ "$compiler" == "icc" ] ; then - platform=${RTE_TARGET%%-*} - if [ "$platform" == "x86_64" ] ; then - setup_icc intel64 - else - setup_icc ia32 - fi - fi - if [ "$QUIT" == "0" ] ; then - make install T=${RTE_TARGET} - fi - echo "------------------------------------------------------------------------------" - echo " RTE_TARGET exported as $RTE_TARGET" - echo "------------------------------------------------------------------------------" -} - -# -# Creates hugepage filesystem. -# -create_mnt_huge() -{ - echo "Creating /mnt/huge and mounting as hugetlbfs" - sudo mkdir -p /mnt/huge - - grep -s '/mnt/huge' /proc/mounts > /dev/null - if [ $? -ne 0 ] ; then - sudo mount -t hugetlbfs nodev /mnt/huge - fi -} - -# -# Removes hugepage filesystem. -# -remove_mnt_huge() -{ - echo "Unmounting /mnt/huge and removing directory" - grep -s '/mnt/huge' /proc/mounts > /dev/null - if [ $? -eq 0 ] ; then - sudo umount /mnt/huge - fi - - if [ -d /mnt/huge ] ; then - sudo rm -R /mnt/huge - fi -} - -# -# Unloads igb_uio.ko. -# -remove_igb_uio_module() -{ - echo "Unloading any existing DPDK UIO module" - /sbin/lsmod | grep -s igb_uio > /dev/null - if [ $? -eq 0 ] ; then - sudo /sbin/rmmod igb_uio - fi -} - -# -# Loads new igb_uio.ko (and uio module if needed). -# -load_igb_uio_module() -{ - if [ ! -f $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko ];then - echo "## ERROR: Target does not have the DPDK UIO Kernel Module." - echo " To fix, please try to rebuild target." - return - fi - - remove_igb_uio_module - - /sbin/lsmod | grep -s uio > /dev/null - if [ $? -ne 0 ] ; then - modinfo uio > /dev/null - if [ $? -eq 0 ]; then - echo "Loading uio module" - sudo /sbin/modprobe uio - fi - fi - - # UIO may be compiled into kernel, so it may not be an error if it can't - # be loaded. - - echo "Loading DPDK UIO module" - sudo /sbin/insmod $RTE_SDK/$RTE_TARGET/kmod/igb_uio.ko - if [ $? -ne 0 ] ; then - echo "## ERROR: Could not load kmod/igb_uio.ko." - quit - fi -} - -# -# Unloads VFIO modules. -# -remove_vfio_module() -{ - echo "Unloading any existing VFIO module" - /sbin/lsmod | grep -s vfio > /dev/null - if [ $? -eq 0 ] ; then - sudo /sbin/rmmod vfio-pci - sudo /sbin/rmmod vfio_iommu_type1 - sudo /sbin/rmmod vfio - fi -} - -# -# Loads new vfio-pci (and vfio module if needed). -# -load_vfio_module() -{ - remove_vfio_module - - VFIO_PATH="kernel/drivers/vfio/pci/vfio-pci.ko" - - echo "Loading VFIO module" - /sbin/lsmod | grep -s vfio_pci > /dev/null - if [ $? -ne 0 ] ; then - if [ -f /lib/modules/$(uname -r)/$VFIO_PATH ] ; then - sudo /sbin/modprobe vfio-pci - fi - fi - - # make sure regular users can read /dev/vfio - echo "chmod /dev/vfio" - sudo chmod a+x /dev/vfio - if [ $? -ne 0 ] ; then - echo "FAIL" - quit - fi - echo "OK" - - # check if /dev/vfio/vfio exists - that way we - # know we either loaded the module, or it was - # compiled into the kernel - if [ ! -e /dev/vfio/vfio ] ; then - echo "## ERROR: VFIO not found!" - fi -} - -# -# Unloads the rte_kni.ko module. -# -remove_kni_module() -{ - echo "Unloading any existing DPDK KNI module" - /sbin/lsmod | grep -s rte_kni > /dev/null - if [ $? -eq 0 ] ; then - sudo /sbin/rmmod rte_kni - fi -} - -# -# Loads the rte_kni.ko module. -# -load_kni_module() -{ - # Check that the KNI module is already built. - if [ ! -f $RTE_SDK/$RTE_TARGET/kmod/rte_kni.ko ];then - echo "## ERROR: Target does not have the DPDK KNI Module." - echo " To fix, please try to rebuild target." - return - fi - - # Unload existing version if present. - remove_kni_module - - # Now try load the KNI module. - echo "Loading DPDK KNI module" - sudo /sbin/insmod $RTE_SDK/$RTE_TARGET/kmod/rte_kni.ko - if [ $? -ne 0 ] ; then - echo "## ERROR: Could not load kmod/rte_kni.ko." - quit - fi -} - -# -# Sets appropriate permissions on /dev/vfio/* files -# -set_vfio_permissions() -{ - # make sure regular users can read /dev/vfio - echo "chmod /dev/vfio" - sudo chmod a+x /dev/vfio - if [ $? -ne 0 ] ; then - echo "FAIL" - quit - fi - echo "OK" - - # make sure regular user can access everything inside /dev/vfio - echo "chmod /dev/vfio/*" - sudo chmod 0666 /dev/vfio/* - if [ $? -ne 0 ] ; then - echo "FAIL" - quit - fi - echo "OK" - - # since permissions are only to be set when running as - # regular user, we only check ulimit here - # - # warn if regular user is only allowed - # to memlock <64M of memory - MEMLOCK_AMNT=`ulimit -l` - - if [ "$MEMLOCK_AMNT" != "unlimited" ] ; then - MEMLOCK_MB=`expr $MEMLOCK_AMNT / 1024` - echo "" - echo "Current user memlock limit: ${MEMLOCK_MB} MB" - echo "" - echo "This is the maximum amount of memory you will be" - echo "able to use with DPDK and VFIO if run as current user." - echo -n "To change this, please adjust limits.conf memlock " - echo "limit for current user." - - if [ $MEMLOCK_AMNT -lt 65536 ] ; then - echo "" - echo "## WARNING: memlock limit is less than 64MB" - echo -n "## DPDK with VFIO may not be able to initialize " - echo "if run as current user." - fi - fi -} - -# -# Removes all reserved hugepages. -# -clear_huge_pages() -{ - echo > .echo_tmp - for d in /sys/devices/system/node/node? ; do - echo "echo 0 > $d/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" >> .echo_tmp - done - echo "Removing currently reserved hugepages" - sudo sh .echo_tmp - rm -f .echo_tmp - - remove_mnt_huge -} - -# -# Creates hugepages. -# -set_non_numa_pages() -{ - clear_huge_pages - - echo "" - echo " Input the number of ${HUGEPGSZ} hugepages" - echo " Example: to have 128MB of hugepages available in a 2MB huge page system," - echo " enter '64' to reserve 64 * 2MB pages" - echo -n "Number of pages: " - read Pages - - echo "echo $Pages > /sys/kernel/mm/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" > .echo_tmp - - echo "Reserving hugepages" - sudo sh .echo_tmp - rm -f .echo_tmp - - create_mnt_huge -} - -# -# Creates hugepages on specific NUMA nodes. -# -set_numa_pages() -{ - clear_huge_pages - - echo "" - echo " Input the number of ${HUGEPGSZ} hugepages for each node" - echo " Example: to have 128MB of hugepages available per node in a 2MB huge page system," - echo " enter '64' to reserve 64 * 2MB pages on each node" - - echo > .echo_tmp - for d in /sys/devices/system/node/node? ; do - node=$(basename $d) - echo -n "Number of pages for $node: " - read Pages - echo "echo $Pages > $d/hugepages/hugepages-${HUGEPGSZ}/nr_hugepages" >> .echo_tmp - done - echo "Reserving hugepages" - sudo sh .echo_tmp - rm -f .echo_tmp - - create_mnt_huge -} - -# -# Run unit test application. -# -run_test_app() -{ - echo "" - echo " Enter hex bitmask of cores to execute test app on" - echo " Example: to execute app on cores 0 to 7, enter 0xff" - echo -n "bitmask: " - read Bitmask - echo "Launching app" - sudo ${RTE_TARGET}/app/test -c $Bitmask $EAL_PARAMS -} - -# -# Run unit testpmd application. -# -run_testpmd_app() -{ - echo "" - echo " Enter hex bitmask of cores to execute testpmd app on" - echo " Example: to execute app on cores 0 to 7, enter 0xff" - echo -n "bitmask: " - read Bitmask - echo "Launching app" - sudo ${RTE_TARGET}/app/testpmd -c $Bitmask $EAL_PARAMS -- -i -} - -# -# Print hugepage information. -# -grep_meminfo() -{ - grep -i huge /proc/meminfo -} - -# -# Calls dpdk-devbind.py --status to show the devices and what they -# are all bound to, in terms of drivers. -# -show_devices() -{ - if [ -d /sys/module/vfio_pci -o -d /sys/module/igb_uio ]; then - ${RTE_SDK}/usertools/dpdk-devbind.py --status - else - echo "# Please load the 'igb_uio' or 'vfio-pci' kernel module before " - echo "# querying or adjusting device bindings" - fi -} - -# -# Uses dpdk-devbind.py to move devices to work with vfio-pci -# -bind_devices_to_vfio() -{ - if [ -d /sys/module/vfio_pci ]; then - ${RTE_SDK}/usertools/dpdk-devbind.py --status - echo "" - echo -n "Enter PCI address of device to bind to VFIO driver: " - read PCI_PATH - sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b vfio-pci $PCI_PATH && - echo "OK" - else - echo "# Please load the 'vfio-pci' kernel module before querying or " - echo "# adjusting device bindings" - fi -} - -# -# Uses dpdk-devbind.py to move devices to work with igb_uio -# -bind_devices_to_igb_uio() -{ - if [ -d /sys/module/igb_uio ]; then - ${RTE_SDK}/usertools/dpdk-devbind.py --status - echo "" - echo -n "Enter PCI address of device to bind to IGB UIO driver: " - read PCI_PATH - sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b igb_uio $PCI_PATH && echo "OK" - else - echo "# Please load the 'igb_uio' kernel module before querying or " - echo "# adjusting device bindings" - fi -} - -# -# Uses dpdk-devbind.py to move devices to work with kernel drivers again -# -unbind_devices() -{ - ${RTE_SDK}/usertools/dpdk-devbind.py --status - echo "" - echo -n "Enter PCI address of device to unbind: " - read PCI_PATH - echo "" - echo -n "Enter name of kernel driver to bind the device to: " - read DRV - sudo ${RTE_SDK}/usertools/dpdk-devbind.py -b $DRV $PCI_PATH && echo "OK" -} - -# -# Options for building a target. Note that this step MUST be first as it sets -# up TARGETS[] starting from 1, and this is accessed in setup_target using the -# user entered option. -# -step1_func() -{ - TITLE="Select the DPDK environment to build" - CONFIG_NUM=1 - for cfg in config/defconfig_* ; do - cfg=${cfg/config\/defconfig_/} - TEXT[$CONFIG_NUM]="$cfg" - TARGETS[$CONFIG_NUM]=$cfg - FUNC[$CONFIG_NUM]="setup_target" - let "CONFIG_NUM+=1" - done -} - -# -# Options for setting up environment. -# -step2_func() -{ - TITLE="Setup linux environment" - - TEXT[1]="Insert IGB UIO module" - FUNC[1]="load_igb_uio_module" - - TEXT[2]="Insert VFIO module" - FUNC[2]="load_vfio_module" - - TEXT[3]="Insert KNI module" - FUNC[3]="load_kni_module" - - TEXT[4]="Setup hugepage mappings for non-NUMA systems" - FUNC[4]="set_non_numa_pages" - - TEXT[5]="Setup hugepage mappings for NUMA systems" - FUNC[5]="set_numa_pages" - - TEXT[6]="Display current Ethernet/Baseband/Crypto device settings" - FUNC[6]="show_devices" - - TEXT[7]="Bind Ethernet/Baseband/Crypto device to IGB UIO module" - FUNC[7]="bind_devices_to_igb_uio" - - TEXT[8]="Bind Ethernet/Baseband/Crypto device to VFIO module" - FUNC[8]="bind_devices_to_vfio" - - TEXT[9]="Setup VFIO permissions" - FUNC[9]="set_vfio_permissions" -} - -# -# Options for running applications. -# -step3_func() -{ - TITLE="Run test application for linux environment" - - TEXT[1]="Run test application (\$RTE_TARGET/app/test)" - FUNC[1]="run_test_app" - - TEXT[2]="Run testpmd application in interactive mode (\$RTE_TARGET/app/testpmd)" - FUNC[2]="run_testpmd_app" -} - -# -# Other options -# -step4_func() -{ - TITLE="Other tools" - - TEXT[1]="List hugepage info from /proc/meminfo" - FUNC[1]="grep_meminfo" - -} - -# -# Options for cleaning up the system -# -step5_func() -{ - TITLE="Uninstall and system cleanup" - - TEXT[1]="Unbind devices from IGB UIO or VFIO driver" - FUNC[1]="unbind_devices" - - TEXT[2]="Remove IGB UIO module" - FUNC[2]="remove_igb_uio_module" - - TEXT[3]="Remove VFIO module" - FUNC[3]="remove_vfio_module" - - TEXT[4]="Remove KNI module" - FUNC[4]="remove_kni_module" - - TEXT[5]="Remove hugepage mappings" - FUNC[5]="clear_huge_pages" -} - -STEPS[1]="step1_func" -STEPS[2]="step2_func" -STEPS[3]="step3_func" -STEPS[4]="step4_func" -STEPS[5]="step5_func" - -QUIT=0 - -while [ "$QUIT" == "0" ]; do - OPTION_NUM=1 - - for s in $(seq ${#STEPS[@]}) ; do - ${STEPS[s]} - - echo "----------------------------------------------------------" - echo " Step $s: ${TITLE}" - echo "----------------------------------------------------------" - - for i in $(seq ${#TEXT[@]}) ; do - echo "[$OPTION_NUM] ${TEXT[i]}" - OPTIONS[$OPTION_NUM]=${FUNC[i]} - let "OPTION_NUM+=1" - done - - # Clear TEXT and FUNC arrays before next step - unset TEXT - unset FUNC - - echo "" - done - - echo "[$OPTION_NUM] Exit Script" - OPTIONS[$OPTION_NUM]="quit" - echo "" - echo '--------------------------------------------------' - echo 'WARNING: This tool will be removed from DPDK 20.11' - echo '--------------------------------------------------' - echo - echo -n "Option: " - read our_entry - echo "" - ${OPTIONS[our_entry]} ${our_entry} - - if [ "$QUIT" == "0" ] ; then - echo - echo -n "Press enter to continue ..."; read - fi - -done