From: Alejandro Lucero Date: Thu, 5 Apr 2018 14:42:46 +0000 (+0100) Subject: doc: update NFP guide X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=b2a99605bc3c00b85a42afd8ce5690f5539a70f8;p=dpdk.git doc: update NFP guide New CPP interface changes the way firmware upload is managed by the PMD. It also supports different firmware file names for having specific firmware applications per card. Signed-off-by: Alejandro Lucero --- diff --git a/doc/guides/nics/nfp.rst b/doc/guides/nics/nfp.rst index 67e574e0a5..927c03c63b 100644 --- a/doc/guides/nics/nfp.rst +++ b/doc/guides/nics/nfp.rst @@ -99,17 +99,35 @@ bound to ``igb_uio`` or ``vfio-pci`` kernel drivers. Future DPDK versions will have a PMD able to work with the PF and VFs at the same time and with the PF implementing VF management along with other PF-only functionalities/offloads. -The PMD PF has extra work to do which will delay the DPDK app initialization. -This additional effort could be checking if a firmware is already available in -the device, uploading the firmware if necessary or configuring the Link state -properly when starting or stopping a PF port. Note that firmware upload is not -always necessary which is the main delay for NFP PF PMD initialization. +The PMD PF has extra work to do which will delay the DPDK app initialization +like uploading the firmware and configure the Link state properly when starting or +stopping a PF port. Since DPDK 18.05 the firmware upload happens when +a PF is initialized, which was not always true with older DPDK versions. Depending on the Netronome product installed in the system, firmware files should be available under ``/lib/firmware/netronome``. DPDK PMD supporting the -PF requires a specific link, ``/lib/firmware/netronome/nic_dpdk_default.nffw``, -which should be created automatically with Netronome's Agilio products -installation. +PF looks for a firmware file in this order: + + 1) First try to find a firmware image specific for this device using the + NFP serial number: + + serial-00-15-4d-12-20-65-10-ff.nffw + + 2) Then try the PCI name: + + pci-0000:04:00.0.nffw + + 3) Finally try the card type and media: + + nic_AMDA0099-0001_2x25.nffw + +Netronome's software packages install firmware files under ``/lib/firmware/netronome`` +to support all the Netronome's SmartNICs and different firmware applications. +This is usually done using file names based on SmartNIC type and media and with a +directory per firmware application. Options 1 and 2 for firmware filenames allow +more than one SmartNIC, same type of SmartNIC or different ones, and to upload a +different firmware to each SmartNIC. + PF multiport support --------------------