From: Ajit Khaparde Date: Thu, 1 Jun 2017 17:07:15 +0000 (-0500) Subject: net/bnxt: support LED on/off X-Git-Tag: spdx-start~3059 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=bb81e07323bb;p=dpdk.git net/bnxt: support LED on/off This patch adds support for dev_led_on/off dev_ops HWRM calls added: bnxt_hwrm_port_led_qcaps() bnxt_hwrm_port_led_cfg() Signed-off-by: Ajit Khaparde --- diff --git a/doc/guides/nics/features/bnxt.ini b/doc/guides/nics/features/bnxt.ini index d4eb69218f..119132e163 100644 --- a/doc/guides/nics/features/bnxt.ini +++ b/doc/guides/nics/features/bnxt.ini @@ -20,6 +20,7 @@ VLAN offload = Y Basic stats = Y Extended stats = Y FW version = Y +LED = Y Linux UIO = Y Linux VFIO = Y x86-64 = Y diff --git a/drivers/net/bnxt/bnxt.h b/drivers/net/bnxt/bnxt.h index e411704084..c23a836896 100644 --- a/drivers/net/bnxt/bnxt.h +++ b/drivers/net/bnxt/bnxt.h @@ -47,6 +47,42 @@ #define BNXT_MAX_MTU 9500 #define VLAN_TAG_SIZE 4 +#define BNXT_MAX_LED 4 + +struct bnxt_led_info { + uint8_t led_id; + uint8_t led_type; + uint8_t led_group_id; + uint8_t unused; + uint16_t led_state_caps; +#define BNXT_LED_ALT_BLINK_CAP(x) ((x) & \ + rte_cpu_to_le_16(HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT)) + + uint16_t led_color_caps; +}; + +struct bnxt_led_cfg { + uint8_t led_id; + uint8_t led_state; + uint8_t led_color; + uint8_t unused; + uint16_t led_blink_on; + uint16_t led_blink_off; + uint8_t led_group_id; + uint8_t rsvd; +}; + +#define BNXT_LED_DFLT_ENA \ + (HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID | \ + HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE | \ + HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON | \ + HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF | \ + HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID) + +#define BNXT_LED_DFLT_ENA_SHIFT 6 + +#define BNXT_LED_DFLT_ENABLES(x) \ + rte_cpu_to_le_32(BNXT_LED_DFLT_ENA << (BNXT_LED_DFLT_ENA_SHIFT * (x))) enum bnxt_hw_context { HW_CONTEXT_NONE = 0, @@ -205,6 +241,9 @@ struct bnxt { uint16_t geneve_fw_dst_port_id; uint32_t fw_ver; rte_atomic64_t rx_mbuf_alloc_fail; + + struct bnxt_led_info leds[BNXT_MAX_LED]; + uint8_t num_leds; }; /* diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c index 5ae70ea592..b90e7dc755 100644 --- a/drivers/net/bnxt/bnxt_ethdev.c +++ b/drivers/net/bnxt/bnxt_ethdev.c @@ -1497,6 +1497,22 @@ bnxt_vlan_pvid_set_op(struct rte_eth_dev *dev, uint16_t pvid, int on) return rc; } +static int +bnxt_dev_led_on_op(struct rte_eth_dev *dev) +{ + struct bnxt *bp = (struct bnxt *)dev->data->dev_private; + + return bnxt_hwrm_port_led_cfg(bp, true); +} + +static int +bnxt_dev_led_off_op(struct rte_eth_dev *dev) +{ + struct bnxt *bp = (struct bnxt *)dev->data->dev_private; + + return bnxt_hwrm_port_led_cfg(bp, false); +} + /* * Initialization */ @@ -1542,6 +1558,8 @@ static const struct eth_dev_ops bnxt_dev_ops = { .set_mc_addr_list = bnxt_dev_set_mc_addr_list_op, .rxq_info_get = bnxt_rxq_info_get_op, .txq_info_get = bnxt_txq_info_get_op, + .dev_led_on = bnxt_dev_led_on_op, + .dev_led_off = bnxt_dev_led_off_op, }; static bool bnxt_vf_pciid(uint16_t id) @@ -1815,6 +1833,8 @@ bnxt_dev_init(struct rte_eth_dev *eth_dev) } } + bnxt_hwrm_port_led_qcaps(bp); + rc = bnxt_setup_int(bp); if (rc) goto error_free; diff --git a/drivers/net/bnxt/bnxt_hwrm.c b/drivers/net/bnxt/bnxt_hwrm.c index a1aa80e248..9a0488548f 100644 --- a/drivers/net/bnxt/bnxt_hwrm.c +++ b/drivers/net/bnxt/bnxt_hwrm.c @@ -2453,3 +2453,73 @@ int bnxt_hwrm_port_clr_stats(struct bnxt *bp) HWRM_CHECK_RESULT; return rc; } + +int bnxt_hwrm_port_led_qcaps(struct bnxt *bp) +{ + struct hwrm_port_led_qcaps_output *resp = bp->hwrm_cmd_resp_addr; + struct hwrm_port_led_qcaps_input req = {0}; + int rc; + + if (BNXT_VF(bp)) + return 0; + + HWRM_PREP(req, PORT_LED_QCAPS, -1, resp); + req.port_id = bp->pf.port_id; + rc = bnxt_hwrm_send_message(bp, &req, sizeof(req)); + HWRM_CHECK_RESULT; + + if (resp->num_leds > 0 && resp->num_leds < BNXT_MAX_LED) { + unsigned int i; + + bp->num_leds = resp->num_leds; + memcpy(bp->leds, &resp->led0_id, + sizeof(bp->leds[0]) * bp->num_leds); + for (i = 0; i < bp->num_leds; i++) { + struct bnxt_led_info *led = &bp->leds[i]; + + uint16_t caps = led->led_state_caps; + + if (!led->led_group_id || + !BNXT_LED_ALT_BLINK_CAP(caps)) { + bp->num_leds = 0; + break; + } + } + } + return rc; +} + +int bnxt_hwrm_port_led_cfg(struct bnxt *bp, bool led_on) +{ + struct hwrm_port_led_cfg_output *resp = bp->hwrm_cmd_resp_addr; + struct hwrm_port_led_cfg_input req = {0}; + struct bnxt_led_cfg *led_cfg; + uint8_t led_state = HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT; + uint16_t duration = 0; + int rc, i; + + if (!bp->num_leds || BNXT_VF(bp)) + return -EOPNOTSUPP; + + HWRM_PREP(req, PORT_LED_CFG, -1, resp); + if (led_on) { + led_state = HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT; + duration = rte_cpu_to_le_16(500); + } + req.port_id = bp->pf.port_id; + req.num_leds = bp->num_leds; + led_cfg = (struct bnxt_led_cfg *)&req.led0_id; + for (i = 0; i < bp->num_leds; i++, led_cfg++) { + req.enables |= BNXT_LED_DFLT_ENABLES(i); + led_cfg->led_id = bp->leds[i].led_id; + led_cfg->led_state = led_state; + led_cfg->led_blink_on = duration; + led_cfg->led_blink_off = duration; + led_cfg->led_group_id = bp->leds[i].led_group_id; + } + + rc = bnxt_hwrm_send_message(bp, &req, sizeof(req)); + HWRM_CHECK_RESULT; + + return rc; +} diff --git a/drivers/net/bnxt/bnxt_hwrm.h b/drivers/net/bnxt/bnxt_hwrm.h index ab42913973..35919173c9 100644 --- a/drivers/net/bnxt/bnxt_hwrm.h +++ b/drivers/net/bnxt/bnxt_hwrm.h @@ -130,4 +130,6 @@ void bnxt_free_tunnel_ports(struct bnxt *bp); int bnxt_hwrm_set_default_vlan(struct bnxt *bp, int vf, uint8_t is_vf); int bnxt_hwrm_port_qstats(struct bnxt *bp); int bnxt_hwrm_port_clr_stats(struct bnxt *bp); +int bnxt_hwrm_port_led_cfg(struct bnxt *bp, bool led_on); +int bnxt_hwrm_port_led_qcaps(struct bnxt *bp); #endif diff --git a/drivers/net/bnxt/hsi_struct_def_dpdk.h b/drivers/net/bnxt/hsi_struct_def_dpdk.h index 2fcfce6c11..17a912f18f 100644 --- a/drivers/net/bnxt/hsi_struct_def_dpdk.h +++ b/drivers/net/bnxt/hsi_struct_def_dpdk.h @@ -5743,6 +5743,983 @@ struct hwrm_port_clr_stats_output { */ } __attribute__((packed)); +/* hwrm_port_led_cfg */ +/* + * Description: This function is used to configure LEDs on a given port. Each + * port has individual set of LEDs associated with it. These LEDs are used for + * speed/link configuration as well as activity indicator configuration. Up to + * three LEDs can be configured, one for activity and two for speeds. + */ +/* Input (64 bytes) */ +struct hwrm_port_led_cfg_input { + uint16_t req_type; + /* + * This value indicates what type of request this is. The format + * for the rest of the command is determined by this field. + */ + uint16_t cmpl_ring; + /* + * This value indicates the what completion ring the request + * will be optionally completed on. If the value is -1, then no + * CR completion will be generated. Any other value must be a + * valid CR ring_id value for this function. + */ + uint16_t seq_id; + /* This value indicates the command sequence number. */ + uint16_t target_id; + /* + * Target ID of this command. 0x0 - 0xFFF8 - Used for function + * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF + * - HWRM + */ + uint64_t resp_addr; + /* + * This is the host address where the response will be written + * when the request is complete. This area must be 16B aligned + * and must be cleared to zero before the request is made. + */ + uint32_t enables; + /* This bit must be '1' for the led0_id field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_ID UINT32_C(0x1) + /* This bit must be '1' for the led0_state field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_STATE UINT32_C(0x2) + /* This bit must be '1' for the led0_color field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_COLOR UINT32_C(0x4) + /* + * This bit must be '1' for the led0_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_ON UINT32_C(0x8) + /* + * This bit must be '1' for the led0_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_BLINK_OFF UINT32_C(0x10) + /* + * This bit must be '1' for the led0_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED0_GROUP_ID UINT32_C(0x20) + /* This bit must be '1' for the led1_id field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_ID UINT32_C(0x40) + /* This bit must be '1' for the led1_state field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_STATE UINT32_C(0x80) + /* This bit must be '1' for the led1_color field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_COLOR UINT32_C(0x100) + /* + * This bit must be '1' for the led1_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_ON UINT32_C(0x200) + /* + * This bit must be '1' for the led1_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_BLINK_OFF UINT32_C(0x400) + /* + * This bit must be '1' for the led1_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED1_GROUP_ID UINT32_C(0x800) + /* This bit must be '1' for the led2_id field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_ID UINT32_C(0x1000) + /* This bit must be '1' for the led2_state field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_STATE UINT32_C(0x2000) + /* This bit must be '1' for the led2_color field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_COLOR UINT32_C(0x4000) + /* + * This bit must be '1' for the led2_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_ON UINT32_C(0x8000) + /* + * This bit must be '1' for the led2_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_BLINK_OFF UINT32_C(0x10000) + /* + * This bit must be '1' for the led2_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED2_GROUP_ID UINT32_C(0x20000) + /* This bit must be '1' for the led3_id field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_ID UINT32_C(0x40000) + /* This bit must be '1' for the led3_state field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_STATE UINT32_C(0x80000) + /* This bit must be '1' for the led3_color field to be configured. */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_COLOR UINT32_C(0x100000) + /* + * This bit must be '1' for the led3_blink_on field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_ON UINT32_C(0x200000) + /* + * This bit must be '1' for the led3_blink_off field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_BLINK_OFF \ + UINT32_C(0x400000) + /* + * This bit must be '1' for the led3_group_id field to be + * configured. + */ + #define HWRM_PORT_LED_CFG_INPUT_ENABLES_LED3_GROUP_ID UINT32_C(0x800000) + uint16_t port_id; + /* Port ID of port whose LEDs are configured. */ + uint8_t num_leds; + /* + * The number of LEDs that are being configured. Up to 4 LEDs + * can be configured with this command. + */ + uint8_t rsvd; + /* Reserved field. */ + uint8_t led0_id; + /* An identifier for the LED #0. */ + uint8_t led0_state; + /* The requested state of the LED #0. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_STATE_BLINKALT UINT32_C(0x4) + uint8_t led0_color; + /* The requested color of LED #0. */ + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_0; + uint16_t led0_blink_on; + /* + * If the LED #0 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led0_blink_off; + /* + * If the LED #0 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led0_group_id; + /* + * An identifier for the group of LEDs that LED #0 belongs to. + * If set to 0, then the LED #0 shall not be grouped and shall + * be treated as an individual resource. For all other non-zero + * values of this field, LED #0 shall be grouped together with + * the LEDs with the same group ID value. + */ + uint8_t rsvd0; + /* Reserved field. */ + uint8_t led1_id; + /* An identifier for the LED #1. */ + uint8_t led1_state; + /* The requested state of the LED #1. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_STATE_BLINKALT UINT32_C(0x4) + uint8_t led1_color; + /* The requested color of LED #1. */ + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_1; + uint16_t led1_blink_on; + /* + * If the LED #1 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led1_blink_off; + /* + * If the LED #1 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led1_group_id; + /* + * An identifier for the group of LEDs that LED #1 belongs to. + * If set to 0, then the LED #1 shall not be grouped and shall + * be treated as an individual resource. For all other non-zero + * values of this field, LED #1 shall be grouped together with + * the LEDs with the same group ID value. + */ + uint8_t rsvd1; + /* Reserved field. */ + uint8_t led2_id; + /* An identifier for the LED #2. */ + uint8_t led2_state; + /* The requested state of the LED #2. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_STATE_BLINKALT UINT32_C(0x4) + uint8_t led2_color; + /* The requested color of LED #2. */ + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_2; + uint16_t led2_blink_on; + /* + * If the LED #2 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led2_blink_off; + /* + * If the LED #2 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led2_group_id; + /* + * An identifier for the group of LEDs that LED #2 belongs to. + * If set to 0, then the LED #2 shall not be grouped and shall + * be treated as an individual resource. For all other non-zero + * values of this field, LED #2 shall be grouped together with + * the LEDs with the same group ID value. + */ + uint8_t rsvd2; + /* Reserved field. */ + uint8_t led3_id; + /* An identifier for the LED #3. */ + uint8_t led3_state; + /* The requested state of the LED #3. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_STATE_BLINKALT UINT32_C(0x4) + uint8_t led3_color; + /* The requested color of LED #3. */ + /* Default */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_CFG_INPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_3; + uint16_t led3_blink_on; + /* + * If the LED #3 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led3_blink_off; + /* + * If the LED #3 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led3_group_id; + /* + * An identifier for the group of LEDs that LED #3 belongs to. + * If set to 0, then the LED #3 shall not be grouped and shall + * be treated as an individual resource. For all other non-zero + * values of this field, LED #3 shall be grouped together with + * the LEDs with the same group ID value. + */ + uint8_t rsvd3; + /* Reserved field. */ +} __attribute__((packed)); + +/* Output (16 bytes) */ +struct hwrm_port_led_cfg_output { + uint16_t error_code; + /* + * Pass/Fail or error type Note: receiver to verify the in + * parameters, and fail the call with an error when appropriate + */ + uint16_t req_type; + /* This field returns the type of original request. */ + uint16_t seq_id; + /* This field provides original sequence number of the command. */ + uint16_t resp_len; + /* + * This field is the length of the response in bytes. The last + * byte of the response is a valid flag that will read as '1' + * when the command has been completely written to memory. + */ + uint32_t unused_0; + uint8_t unused_1; + uint8_t unused_2; + uint8_t unused_3; + uint8_t valid; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been completely + * written. When writing a command completion or response to an + * internal processor, the order of writes has to be such that + * this field is written last. + */ +} __attribute__((packed)); + +/* hwrm_port_led_qcfg */ +/* + * Description: This function is used to query configuration of LEDs on a given + * port. Each port has individual set of LEDs associated with it. These LEDs are + * used for speed/link configuration as well as activity indicator + * configuration. Up to three LEDs can be configured, one for activity and two + * for speeds. + */ +/* Input (24 bytes) */ +struct hwrm_port_led_qcfg_input { + uint16_t req_type; + /* + * This value indicates what type of request this is. The format + * for the rest of the command is determined by this field. + */ + uint16_t cmpl_ring; + /* + * This value indicates the what completion ring the request + * will be optionally completed on. If the value is -1, then no + * CR completion will be generated. Any other value must be a + * valid CR ring_id value for this function. + */ + uint16_t seq_id; + /* This value indicates the command sequence number. */ + uint16_t target_id; + /* + * Target ID of this command. 0x0 - 0xFFF8 - Used for function + * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF + * - HWRM + */ + uint64_t resp_addr; + /* + * This is the host address where the response will be written + * when the request is complete. This area must be 16B aligned + * and must be cleared to zero before the request is made. + */ + uint16_t port_id; + /* Port ID of port whose LED configuration is being queried. */ + uint16_t unused_0[3]; +} __attribute__((packed)); + +/* Output (56 bytes) */ +struct hwrm_port_led_qcfg_output { + uint16_t error_code; + /* + * Pass/Fail or error type Note: receiver to verify the in + * parameters, and fail the call with an error when appropriate + */ + uint16_t req_type; + /* This field returns the type of original request. */ + uint16_t seq_id; + /* This field provides original sequence number of the command. */ + uint16_t resp_len; + /* + * This field is the length of the response in bytes. The last + * byte of the response is a valid flag that will read as '1' + * when the command has been completely written to memory. + */ + uint8_t num_leds; + /* + * The number of LEDs that are configured on this port. Up to 4 + * LEDs can be returned in the response. + */ + uint8_t led0_id; + /* An identifier for the LED #0. */ + uint8_t led0_type; + /* The type of LED #0. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) + uint8_t led0_state; + /* The current state of the LED #0. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_STATE_BLINKALT UINT32_C(0x4) + uint8_t led0_color; + /* The color of LED #0. */ + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED0_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_0; + uint16_t led0_blink_on; + /* + * If the LED #0 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led0_blink_off; + /* + * If the LED #0 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led0_group_id; + /* + * An identifier for the group of LEDs that LED #0 belongs to. + * If set to 0, then the LED #0 is not grouped. For all other + * non-zero values of this field, LED #0 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t led1_id; + /* An identifier for the LED #1. */ + uint8_t led1_type; + /* The type of LED #1. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) + uint8_t led1_state; + /* The current state of the LED #1. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_STATE_BLINKALT UINT32_C(0x4) + uint8_t led1_color; + /* The color of LED #1. */ + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED1_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_1; + uint16_t led1_blink_on; + /* + * If the LED #1 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led1_blink_off; + /* + * If the LED #1 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led1_group_id; + /* + * An identifier for the group of LEDs that LED #1 belongs to. + * If set to 0, then the LED #1 is not grouped. For all other + * non-zero values of this field, LED #1 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t led2_id; + /* An identifier for the LED #2. */ + uint8_t led2_type; + /* The type of LED #2. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) + uint8_t led2_state; + /* The current state of the LED #2. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_STATE_BLINKALT UINT32_C(0x4) + uint8_t led2_color; + /* The color of LED #2. */ + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED2_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_2; + uint16_t led2_blink_on; + /* + * If the LED #2 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led2_blink_off; + /* + * If the LED #2 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led2_group_id; + /* + * An identifier for the group of LEDs that LED #2 belongs to. + * If set to 0, then the LED #2 is not grouped. For all other + * non-zero values of this field, LED #2 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t led3_id; + /* An identifier for the LED #3. */ + uint8_t led3_type; + /* The type of LED #3. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) + uint8_t led3_state; + /* The current state of the LED #3. */ + /* Default state of the LED */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_DEFAULT UINT32_C(0x0) + /* Off */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_OFF UINT32_C(0x1) + /* On */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_ON UINT32_C(0x2) + /* Blink */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINK UINT32_C(0x3) + /* Blink Alternately */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_STATE_BLINKALT UINT32_C(0x4) + uint8_t led3_color; + /* The color of LED #3. */ + /* Default */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_DEFAULT UINT32_C(0x0) + /* Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_AMBER UINT32_C(0x1) + /* Green */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREEN UINT32_C(0x2) + /* Green or Amber */ + #define HWRM_PORT_LED_QCFG_OUTPUT_LED3_COLOR_GREENAMBER UINT32_C(0x3) + uint8_t unused_3; + uint16_t led3_blink_on; + /* + * If the LED #3 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED on + * between cycles. + */ + uint16_t led3_blink_off; + /* + * If the LED #3 state is "blink" or "blinkalt", then this field + * represents the requested time in milliseconds to keep LED off + * between cycles. + */ + uint8_t led3_group_id; + /* + * An identifier for the group of LEDs that LED #3 belongs to. + * If set to 0, then the LED #3 is not grouped. For all other + * non-zero values of this field, LED #3 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t unused_4; + uint16_t unused_5; + uint8_t unused_6; + uint8_t unused_7; + uint8_t unused_8; + uint8_t valid; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been completely + * written. When writing a command completion or response to an + * internal processor, the order of writes has to be such that + * this field is written last. + */ +} __attribute__((packed)); + +/* hwrm_port_led_qcaps */ +/* + * Description: This function is used to query capabilities of LEDs on a given + * port. Each port has individual set of LEDs associated with it. These LEDs are + * used for speed/link configuration as well as activity indicator + * configuration. + */ +/* Input (24 bytes) */ +struct hwrm_port_led_qcaps_input { + uint16_t req_type; + /* + * This value indicates what type of request this is. The format + * for the rest of the command is determined by this field. + */ + uint16_t cmpl_ring; + /* + * This value indicates the what completion ring the request + * will be optionally completed on. If the value is -1, then no + * CR completion will be generated. Any other value must be a + * valid CR ring_id value for this function. + */ + uint16_t seq_id; + /* This value indicates the command sequence number. */ + uint16_t target_id; + /* + * Target ID of this command. 0x0 - 0xFFF8 - Used for function + * ids 0xFFF8 - 0xFFFE - Reserved for internal processors 0xFFFF + * - HWRM + */ + uint64_t resp_addr; + /* + * This is the host address where the response will be written + * when the request is complete. This area must be 16B aligned + * and must be cleared to zero before the request is made. + */ + uint16_t port_id; + /* Port ID of port whose LED configuration is being queried. */ + uint16_t unused_0[3]; +} __attribute__((packed)); + +/* Output (48 bytes) */ +struct hwrm_port_led_qcaps_output { + uint16_t error_code; + /* + * Pass/Fail or error type Note: receiver to verify the in + * parameters, and fail the call with an error when appropriate + */ + uint16_t req_type; + /* This field returns the type of original request. */ + uint16_t seq_id; + /* This field provides original sequence number of the command. */ + uint16_t resp_len; + /* + * This field is the length of the response in bytes. The last + * byte of the response is a valid flag that will read as '1' + * when the command has been completely written to memory. + */ + uint8_t num_leds; + /* + * The number of LEDs that are configured on this port. Up to 4 + * LEDs can be returned in the response. + */ + uint8_t unused_0[3]; + /* Reserved for future use. */ + uint8_t led0_id; + /* An identifier for the LED #0. */ + uint8_t led0_type; + /* The type of LED #0. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_TYPE_INVALID UINT32_C(0xff) + uint8_t led0_group_id; + /* + * An identifier for the group of LEDs that LED #0 belongs to. + * If set to 0, then the LED #0 cannot be grouped. For all other + * non-zero values of this field, LED #0 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t unused_1; + uint16_t led0_state_caps; + /* The states supported by LED #0. */ + /* + * If set to 1, this LED is enabled. If set to 0, this LED is + * disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ENABLED UINT32_C(0x1) + /* + * If set to 1, off state is supported on this LED. If set to 0, + * off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_OFF_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, on state is supported on this LED. If set to 0, + * on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. If set to + * 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. If set + * to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + uint16_t led0_color_caps; + /* The colors supported by LED #0. */ + /* reserved */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_RSVD UINT32_C(0x1) + /* + * If set to 1, Amber color is supported on this LED. If set to + * 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_AMBER_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, Green color is supported on this LED. If set to + * 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED0_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + uint8_t led1_id; + /* An identifier for the LED #1. */ + uint8_t led1_type; + /* The type of LED #1. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_TYPE_INVALID UINT32_C(0xff) + uint8_t led1_group_id; + /* + * An identifier for the group of LEDs that LED #1 belongs to. + * If set to 0, then the LED #0 cannot be grouped. For all other + * non-zero values of this field, LED #0 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t unused_2; + uint16_t led1_state_caps; + /* The states supported by LED #1. */ + /* + * If set to 1, this LED is enabled. If set to 0, this LED is + * disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ENABLED UINT32_C(0x1) + /* + * If set to 1, off state is supported on this LED. If set to 0, + * off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_OFF_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, on state is supported on this LED. If set to 0, + * on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. If set to + * 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. If set + * to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + uint16_t led1_color_caps; + /* The colors supported by LED #1. */ + /* reserved */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_RSVD UINT32_C(0x1) + /* + * If set to 1, Amber color is supported on this LED. If set to + * 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_AMBER_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, Green color is supported on this LED. If set to + * 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED1_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + uint8_t led2_id; + /* An identifier for the LED #2. */ + uint8_t led2_type; + /* The type of LED #2. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_TYPE_INVALID UINT32_C(0xff) + uint8_t led2_group_id; + /* + * An identifier for the group of LEDs that LED #0 belongs to. + * If set to 0, then the LED #0 cannot be grouped. For all other + * non-zero values of this field, LED #0 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t unused_3; + uint16_t led2_state_caps; + /* The states supported by LED #2. */ + /* + * If set to 1, this LED is enabled. If set to 0, this LED is + * disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ENABLED UINT32_C(0x1) + /* + * If set to 1, off state is supported on this LED. If set to 0, + * off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_OFF_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, on state is supported on this LED. If set to 0, + * on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. If set to + * 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. If set + * to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + uint16_t led2_color_caps; + /* The colors supported by LED #2. */ + /* reserved */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_RSVD UINT32_C(0x1) + /* + * If set to 1, Amber color is supported on this LED. If set to + * 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_AMBER_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, Green color is supported on this LED. If set to + * 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED2_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + uint8_t led3_id; + /* An identifier for the LED #3. */ + uint8_t led3_type; + /* The type of LED #3. */ + /* Speed LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_SPEED UINT32_C(0x0) + /* Activity LED */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_ACTIVITY UINT32_C(0x1) + /* Invalid */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_TYPE_INVALID UINT32_C(0xff) + uint8_t led3_group_id; + /* + * An identifier for the group of LEDs that LED #3 belongs to. + * If set to 0, then the LED #0 cannot be grouped. For all other + * non-zero values of this field, LED #0 is grouped together + * with the LEDs with the same group ID value. + */ + uint8_t unused_4; + uint16_t led3_state_caps; + /* The states supported by LED #3. */ + /* + * If set to 1, this LED is enabled. If set to 0, this LED is + * disabled. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ENABLED UINT32_C(0x1) + /* + * If set to 1, off state is supported on this LED. If set to 0, + * off state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_OFF_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, on state is supported on this LED. If set to 0, + * on state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_ON_SUPPORTED \ + UINT32_C(0x4) + /* + * If set to 1, blink state is supported on this LED. If set to + * 0, blink state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_SUPPORTED \ + UINT32_C(0x8) + /* + * If set to 1, blink_alt state is supported on this LED. If set + * to 0, blink_alt state is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_STATE_CAPS_BLINK_ALT_SUPPORTED \ + UINT32_C(0x10) + uint16_t led3_color_caps; + /* The colors supported by LED #3. */ + /* reserved */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_RSVD UINT32_C(0x1) + /* + * If set to 1, Amber color is supported on this LED. If set to + * 0, Amber color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_AMBER_SUPPORTED \ + UINT32_C(0x2) + /* + * If set to 1, Green color is supported on this LED. If set to + * 0, Green color is not supported on this LED. + */ + #define HWRM_PORT_LED_QCAPS_OUTPUT_LED3_COLOR_CAPS_GREEN_SUPPORTED \ + UINT32_C(0x4) + uint8_t unused_5; + uint8_t unused_6; + uint8_t unused_7; + uint8_t valid; + /* + * This field is used in Output records to indicate that the + * output is completely written to RAM. This field should be + * read as '1' to indicate that the output has been completely + * written. When writing a command completion or response to an + * internal processor, the order of writes has to be such that + * this field is written last. + */ +} __attribute__((packed)); + /* hwrm_queue_qportcfg */ /* * Description: This function is called by a driver to query queue configuration