From: Huisong Li Date: Tue, 13 Apr 2021 13:47:17 +0000 (+0800) Subject: net/hns3: support link speed autoneg for PF X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=bdaf190f8235ff0968cc346c005fceccda4e1af0;p=dpdk.git net/hns3: support link speed autoneg for PF This patch supports link speed auto-negotiation for PF. If the device supports auto-negotiation, the device negotiates with the link partner at all speeds supported by the device. Signed-off-by: Huisong Li Signed-off-by: Min Hu (Connor) --- diff --git a/drivers/net/hns3/hns3_cmd.h b/drivers/net/hns3/hns3_cmd.h index fc75429a3a..e4f5aa6000 100644 --- a/drivers/net/hns3/hns3_cmd.h +++ b/drivers/net/hns3/hns3_cmd.h @@ -108,6 +108,7 @@ enum hns3_opcode_type { /* MAC command */ HNS3_OPC_CONFIG_MAC_MODE = 0x0301, + HNS3_OPC_CONFIG_AN_MODE = 0x0304, HNS3_OPC_QUERY_LINK_STATUS = 0x0307, HNS3_OPC_CONFIG_MAX_FRM_SIZE = 0x0308, HNS3_OPC_CONFIG_SPEED_DUP = 0x0309, @@ -796,7 +797,9 @@ struct hns3_sfp_info_cmd { uint32_t sfp_speed; uint8_t query_type; /* 0: sfp speed, 1: active */ uint8_t active_fec; /* current FEC mode */ - uint16_t rsv; + uint8_t autoneg; /* current autoneg state */ + /* 0: not support autoneg, 1: support autoneg */ + uint8_t autoneg_ability; uint32_t supported_speed; /* speed supported by current media */ uint32_t module_type; uint8_t rsv1[8]; diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c index fe46d78f9c..52b1f06a63 100644 --- a/drivers/net/hns3/hns3_ethdev.c +++ b/drivers/net/hns3/hns3_ethdev.c @@ -2850,8 +2850,7 @@ hns3_setup_linkstatus(struct rte_eth_dev *eth_dev, new_link->link_duplex = mac->link_duplex; new_link->link_status = mac->link_status ? ETH_LINK_UP : ETH_LINK_DOWN; - new_link->link_autoneg = - !(eth_dev->data->dev_conf.link_speeds & ETH_LINK_SPEED_FIXED); + new_link->link_autoneg = mac->link_autoneg; } static int @@ -4605,6 +4604,9 @@ hns3_get_sfp_info(struct hns3_hw *hw, struct hns3_mac *mac_info) mac_info->query_type = HNS3_ACTIVE_QUERY; mac_info->supported_speed = rte_le_to_cpu_32(resp->supported_speed); + mac_info->support_autoneg = resp->autoneg_ability; + mac_info->link_autoneg = (resp->autoneg == 0) ? ETH_LINK_FIXED + : ETH_LINK_AUTONEG; } else { mac_info->query_type = HNS3_DEFAULT_QUERY; } @@ -4685,6 +4687,8 @@ hns3_update_fiber_link_info(struct hns3_hw *hw) mac->link_speed = mac_info.link_speed; mac->supported_speed = mac_info.supported_speed; + mac->support_autoneg = mac_info.support_autoneg; + mac->link_autoneg = mac_info.link_autoneg; return 0; } @@ -5247,6 +5251,144 @@ hns3_uninit_pf(struct rte_eth_dev *eth_dev) hw->io_base = NULL; } +static int +hns3_set_copper_port_link_speed(struct hns3_hw *hw, + struct hns3_set_link_speed_cfg *cfg) +{ + struct hns3_cmd_desc desc[HNS3_PHY_PARAM_CFG_BD_NUM]; + struct hns3_phy_params_bd0_cmd *req; + uint16_t i; + + for (i = 0; i < HNS3_PHY_PARAM_CFG_BD_NUM - 1; i++) { + hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG, + false); + desc[i].flag |= rte_cpu_to_le_16(HNS3_CMD_FLAG_NEXT); + } + hns3_cmd_setup_basic_desc(&desc[i], HNS3_OPC_PHY_PARAM_CFG, false); + req = (struct hns3_phy_params_bd0_cmd *)desc[0].data; + req->autoneg = cfg->autoneg; + + /* + * The full speed capability is used to negotiate when + * auto-negotiation is enabled. + */ + if (cfg->autoneg) { + req->advertising = HNS3_PHY_LINK_SPEED_10M_BIT | + HNS3_PHY_LINK_SPEED_10M_HD_BIT | + HNS3_PHY_LINK_SPEED_100M_BIT | + HNS3_PHY_LINK_SPEED_100M_HD_BIT | + HNS3_PHY_LINK_SPEED_1000M_BIT; + } + + return hns3_cmd_send(hw, desc, HNS3_PHY_PARAM_CFG_BD_NUM); +} + +static int +hns3_set_autoneg(struct hns3_hw *hw, bool enable) +{ + struct hns3_config_auto_neg_cmd *req; + struct hns3_cmd_desc desc; + uint32_t flag = 0; + int ret; + + hns3_cmd_setup_basic_desc(&desc, HNS3_OPC_CONFIG_AN_MODE, false); + + req = (struct hns3_config_auto_neg_cmd *)desc.data; + if (enable) + hns3_set_bit(flag, HNS3_MAC_CFG_AN_EN_B, 1); + req->cfg_an_cmd_flag = rte_cpu_to_le_32(flag); + + ret = hns3_cmd_send(hw, &desc, 1); + if (ret) + hns3_err(hw, "autoneg set cmd failed, ret = %d.", ret); + + return ret; +} + +static int +hns3_set_fiber_port_link_speed(struct hns3_hw *hw, + struct hns3_set_link_speed_cfg *cfg) +{ + int ret; + + if (hw->mac.support_autoneg) { + ret = hns3_set_autoneg(hw, cfg->autoneg); + if (ret) { + hns3_err(hw, "failed to configure auto-negotiation."); + return ret; + } + + /* + * To enable auto-negotiation, we only need to open the switch + * of auto-negotiation, then firmware sets all speed + * capabilities. + */ + if (cfg->autoneg) + return 0; + } + + /* + * Some hardware doesn't support auto-negotiation, but users may not + * configure link_speeds (default 0), which means auto-negotiation + * In this case, a warning message need to be printed, instead of + * an error. + */ + if (cfg->autoneg) { + hns3_warn(hw, "auto-negotiation is not supported."); + return 0; + } + + return 0; +} + +static int +hns3_set_port_link_speed(struct hns3_hw *hw, + struct hns3_set_link_speed_cfg *cfg) +{ + int ret; + + if (hw->mac.media_type == HNS3_MEDIA_TYPE_COPPER) { +#if defined(RTE_HNS3_ONLY_1630_FPGA) + struct hns3_pf *pf = HNS3_DEV_HW_TO_PF(hw); + if (pf->is_tmp_phy) + return 0; +#endif + + ret = hns3_set_copper_port_link_speed(hw, cfg); + if (ret) { + hns3_err(hw, "failed to set copper port link speed," + "ret = %d.", ret); + return ret; + } + } else if (hw->mac.media_type == HNS3_MEDIA_TYPE_FIBER) { + ret = hns3_set_fiber_port_link_speed(hw, cfg); + if (ret) { + hns3_err(hw, "failed to set fiber port link speed," + "ret = %d.", ret); + return ret; + } + } + + return 0; +} + +static int +hns3_apply_link_speed(struct hns3_hw *hw) +{ + struct rte_eth_conf *conf = &hw->data->dev_conf; + struct hns3_set_link_speed_cfg cfg; + + memset(&cfg, 0, sizeof(struct hns3_set_link_speed_cfg)); + cfg.autoneg = (conf->link_speeds == ETH_LINK_SPEED_AUTONEG) ? + ETH_LINK_AUTONEG : ETH_LINK_FIXED; + if (cfg.autoneg != ETH_LINK_AUTONEG) { + hns3_err(hw, "device doesn't support to force link speed."); + return -EOPNOTSUPP; + } + + return hns3_set_port_link_speed(hw, &cfg); +} + static int hns3_do_start(struct hns3_adapter *hns, bool reset_queue) { @@ -5280,9 +5422,15 @@ hns3_do_start(struct hns3_adapter *hns, bool reset_queue) PMD_INIT_LOG(ERR, "failed to enable MAC, ret = %d", ret); goto err_config_mac_mode; } + + ret = hns3_apply_link_speed(hw); + if (ret) + goto err_config_mac_mode; + return 0; err_config_mac_mode: + (void)hns3_cfg_mac_mode(hw, false); hns3_dev_release_mbufs(hns); /* * Here is exception handling, hns3_reset_all_tqps will have the diff --git a/drivers/net/hns3/hns3_ethdev.h b/drivers/net/hns3/hns3_ethdev.h index df37f05159..7b7d359269 100644 --- a/drivers/net/hns3/hns3_ethdev.h +++ b/drivers/net/hns3/hns3_ethdev.h @@ -165,6 +165,12 @@ struct hns3_cfg { uint16_t umv_space; }; +struct hns3_set_link_speed_cfg { + uint32_t speed; + uint8_t duplex : 1; + uint8_t autoneg : 1; +}; + /* mac media type */ enum hns3_media_type { HNS3_MEDIA_TYPE_UNKNOWN,