From: Intel Date: Wed, 19 Dec 2012 23:00:00 +0000 (+0100) Subject: e1000: whitespace changes X-Git-Tag: spdx-start~11350 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=bdb244b969208e6d4b8014e6e9e6cb5f3613caf3;p=dpdk.git e1000: whitespace changes Signed-off-by: Intel --- diff --git a/lib/librte_pmd_e1000/e1000/e1000_82575.c b/lib/librte_pmd_e1000/e1000/e1000_82575.c index a6187dbc43..fc303a23fe 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_82575.c +++ b/lib/librte_pmd_e1000/e1000/e1000_82575.c @@ -53,34 +53,34 @@ STATIC void e1000_release_nvm_82575(struct e1000_hw *hw); STATIC s32 e1000_check_for_link_82575(struct e1000_hw *hw); STATIC s32 e1000_get_cfg_done_82575(struct e1000_hw *hw); STATIC s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex); + u16 *duplex); STATIC s32 e1000_init_hw_82575(struct e1000_hw *hw); STATIC s32 e1000_phy_hw_reset_sgmii_82575(struct e1000_hw *hw); STATIC s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data); + u16 *data); STATIC s32 e1000_reset_hw_82575(struct e1000_hw *hw); STATIC s32 e1000_reset_hw_82580(struct e1000_hw *hw); STATIC s32 e1000_read_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 *data); + u32 offset, u16 *data); STATIC s32 e1000_write_phy_reg_82580(struct e1000_hw *hw, - u32 offset, u16 data); + u32 offset, u16 data); STATIC s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, - bool active); + bool active); STATIC s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, - bool active); + bool active); STATIC s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, - bool active); + bool active); STATIC s32 e1000_setup_copper_link_82575(struct e1000_hw *hw); STATIC s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw); STATIC s32 e1000_get_media_type_82575(struct e1000_hw *hw); STATIC s32 e1000_set_sfp_media_type_82575(struct e1000_hw *hw); STATIC s32 e1000_valid_led_default_82575(struct e1000_hw *hw, u16 *data); STATIC s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, - u32 offset, u16 data); + u32 offset, u16 data); STATIC void e1000_clear_hw_cntrs_82575(struct e1000_hw *hw); STATIC s32 e1000_acquire_swfw_sync_82575(struct e1000_hw *hw, u16 mask); static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex); + u16 *speed, u16 *duplex); static s32 e1000_get_phy_id_82575(struct e1000_hw *hw); STATIC void e1000_release_swfw_sync_82575(struct e1000_hw *hw, u16 mask); static bool e1000_sgmii_active_82575(struct e1000_hw *hw); @@ -95,9 +95,9 @@ STATIC s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw); STATIC s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw); STATIC s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw); STATIC s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); + u16 offset); STATIC s32 e1000_validate_nvm_checksum_with_offset(struct e1000_hw *hw, - u16 offset); + u16 offset); STATIC s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw); STATIC s32 e1000_update_nvm_checksum_i350(struct e1000_hw *hw); STATIC void e1000_write_vfta_i350(struct e1000_hw *hw, u32 offset, u32 value); @@ -177,22 +177,22 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw) phy->ops.power_up = e1000_power_up_phy_copper; phy->ops.power_down = e1000_power_down_phy_copper_82575; - phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; - phy->reset_delay_us = 100; + phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT; + phy->reset_delay_us = 100; - phy->ops.acquire = e1000_acquire_phy_82575; - phy->ops.check_reset_block = e1000_check_reset_block_generic; - phy->ops.commit = e1000_phy_sw_reset_generic; - phy->ops.get_cfg_done = e1000_get_cfg_done_82575; - phy->ops.release = e1000_release_phy_82575; + phy->ops.acquire = e1000_acquire_phy_82575; + phy->ops.check_reset_block = e1000_check_reset_block_generic; + phy->ops.commit = e1000_phy_sw_reset_generic; + phy->ops.get_cfg_done = e1000_get_cfg_done_82575; + phy->ops.release = e1000_release_phy_82575; ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); if (e1000_sgmii_active_82575(hw)) { - phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; + phy->ops.reset = e1000_phy_hw_reset_sgmii_82575; ctrl_ext |= E1000_CTRL_I2C_ENA; } else { - phy->ops.reset = e1000_phy_hw_reset_generic; + phy->ops.reset = e1000_phy_hw_reset_generic; ctrl_ext &= ~E1000_CTRL_I2C_ENA; } @@ -200,14 +200,14 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw) e1000_reset_mdicnfg_82580(hw); if (e1000_sgmii_active_82575(hw) && !e1000_sgmii_uses_mdio_82575(hw)) { - phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; - phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; + phy->ops.read_reg = e1000_read_phy_reg_sgmii_82575; + phy->ops.write_reg = e1000_write_phy_reg_sgmii_82575; } else { switch (hw->mac.type) { case e1000_82580: case e1000_i350: - phy->ops.read_reg = e1000_read_phy_reg_82580; - phy->ops.write_reg = e1000_write_phy_reg_82580; + phy->ops.read_reg = e1000_read_phy_reg_82580; + phy->ops.write_reg = e1000_write_phy_reg_82580; break; case e1000_i210: case e1000_i211: @@ -215,9 +215,9 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw) phy->ops.write_reg = e1000_write_phy_reg_gs40g; break; default: - phy->ops.read_reg = e1000_read_phy_reg_igp; - phy->ops.write_reg = e1000_write_phy_reg_igp; - } + phy->ops.read_reg = e1000_read_phy_reg_igp; + phy->ops.write_reg = e1000_write_phy_reg_igp; + } } /* Set phy->phy_addr and phy->id. */ @@ -229,9 +229,9 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw) case M88E1112_E_PHY_ID: case M88E1340M_E_PHY_ID: case M88E1111_I_PHY_ID: - phy->type = e1000_phy_m88; - phy->ops.check_polarity = e1000_check_polarity_m88; - phy->ops.get_info = e1000_get_phy_info_m88; + phy->type = e1000_phy_m88; + phy->ops.check_polarity = e1000_check_polarity_m88; + phy->ops.get_info = e1000_get_phy_info_m88; if (phy->id == I347AT4_E_PHY_ID || phy->id == M88E1112_E_PHY_ID || phy->id == M88E1340M_E_PHY_ID) @@ -243,24 +243,24 @@ STATIC s32 e1000_init_phy_params_82575(struct e1000_hw *hw) break; case IGP03E1000_E_PHY_ID: case IGP04E1000_E_PHY_ID: - phy->type = e1000_phy_igp_3; - phy->ops.check_polarity = e1000_check_polarity_igp; - phy->ops.get_info = e1000_get_phy_info_igp; - phy->ops.get_cable_length = e1000_get_cable_length_igp_2; + phy->type = e1000_phy_igp_3; + phy->ops.check_polarity = e1000_check_polarity_igp; + phy->ops.get_info = e1000_get_phy_info_igp; + phy->ops.get_cable_length = e1000_get_cable_length_igp_2; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_igp; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82575; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_generic; break; case I82580_I_PHY_ID: case I350_I_PHY_ID: - phy->type = e1000_phy_82580; - phy->ops.check_polarity = e1000_check_polarity_82577; + phy->type = e1000_phy_82580; + phy->ops.check_polarity = e1000_check_polarity_82577; phy->ops.force_speed_duplex = e1000_phy_force_speed_duplex_82577; - phy->ops.get_cable_length = e1000_get_cable_length_82577; - phy->ops.get_info = e1000_get_phy_info_82577; - phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; - phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; + phy->ops.get_cable_length = e1000_get_cable_length_82577; + phy->ops.get_info = e1000_get_phy_info_82577; + phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82580; + phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82580; break; case I210_I_PHY_ID: phy->type = e1000_phy_i210; @@ -293,7 +293,7 @@ s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) DEBUGFUNC("e1000_init_nvm_params_82575"); size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >> - E1000_EECD_SIZE_EX_SHIFT); + E1000_EECD_SIZE_EX_SHIFT); /* * Added to a constant, "size" becomes the left-shift value * for setting word_size. @@ -308,43 +308,43 @@ s32 e1000_init_nvm_params_82575(struct e1000_hw *hw) nvm->word_size = 1 << size; if (hw->mac.type < e1000_i210) { - nvm->opcode_bits = 8; - nvm->delay_usec = 1; + nvm->opcode_bits = 8; + nvm->delay_usec = 1; - switch (nvm->override) { - case e1000_nvm_override_spi_large: - nvm->page_size = 32; - nvm->address_bits = 16; - break; - case e1000_nvm_override_spi_small: - nvm->page_size = 8; - nvm->address_bits = 8; - break; - default: - nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; + switch (nvm->override) { + case e1000_nvm_override_spi_large: + nvm->page_size = 32; + nvm->address_bits = 16; + break; + case e1000_nvm_override_spi_small: + nvm->page_size = 8; + nvm->address_bits = 8; + break; + default: + nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8; nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8; - break; - } - if (nvm->word_size == (1 << 15)) - nvm->page_size = 128; + break; + } + if (nvm->word_size == (1 << 15)) + nvm->page_size = 128; nvm->type = e1000_nvm_eeprom_spi; } else { nvm->type = e1000_nvm_flash_hw; } /* Function Pointers */ - nvm->ops.acquire = e1000_acquire_nvm_82575; - nvm->ops.release = e1000_release_nvm_82575; + nvm->ops.acquire = e1000_acquire_nvm_82575; + nvm->ops.release = e1000_release_nvm_82575; if (nvm->word_size < (1 << 15)) - nvm->ops.read = e1000_read_nvm_eerd; + nvm->ops.read = e1000_read_nvm_eerd; else - nvm->ops.read = e1000_read_nvm_spi; + nvm->ops.read = e1000_read_nvm_spi; - nvm->ops.write = e1000_write_nvm_spi; - nvm->ops.validate = e1000_validate_nvm_checksum_generic; - nvm->ops.update = e1000_update_nvm_checksum_generic; - nvm->ops.valid_led_default = e1000_valid_led_default_82575; + nvm->ops.write = e1000_write_nvm_spi; + nvm->ops.validate = e1000_validate_nvm_checksum_generic; + nvm->ops.update = e1000_update_nvm_checksum_generic; + nvm->ops.valid_led_default = e1000_valid_led_default_82575; /* override generic family function pointers for specific descendants */ switch (hw->mac.type) { @@ -415,7 +415,7 @@ STATIC s32 e1000_init_mac_params_82575(struct e1000_hw *hw) mac->ops.setup_link = e1000_setup_link_generic; /* physical interface link setup */ mac->ops.setup_physical_interface = - (hw->phy.media_type == e1000_media_type_copper) + (hw->phy.media_type == e1000_media_type_copper) ? e1000_setup_copper_link_82575 : e1000_setup_serdes_link_82575; /* physical interface shutdown */ mac->ops.shutdown_serdes = e1000_shutdown_serdes_link_82575; @@ -435,10 +435,10 @@ STATIC s32 e1000_init_mac_params_82575(struct e1000_hw *hw) /* clearing VFTA */ mac->ops.clear_vfta = e1000_clear_vfta_i350; } else { - /* writing VFTA */ - mac->ops.write_vfta = e1000_write_vfta_generic; - /* clearing VFTA */ - mac->ops.clear_vfta = e1000_clear_vfta_generic; + /* writing VFTA */ + mac->ops.write_vfta = e1000_write_vfta_generic; + /* clearing VFTA */ + mac->ops.clear_vfta = e1000_clear_vfta_generic; } if (hw->mac.type >= e1000_82580) mac->ops.validate_mdi_setting = @@ -542,7 +542,7 @@ STATIC void e1000_release_phy_82575(struct e1000_hw *hw) * interface and stores the retrieved information in data. **/ STATIC s32 e1000_read_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 *data) + u16 *data) { s32 ret_val = -E1000_ERR_PARAM; @@ -575,7 +575,7 @@ out: * media independent interface. **/ STATIC s32 e1000_write_phy_reg_sgmii_82575(struct e1000_hw *hw, u32 offset, - u16 data) + u16 data) { s32 ret_val = -E1000_ERR_PARAM; @@ -656,7 +656,7 @@ STATIC s32 e1000_get_phy_id_82575(struct e1000_hw *hw) /* Power on sgmii phy if it is disabled */ ctrl_ext = E1000_READ_REG(hw, E1000_CTRL_EXT); E1000_WRITE_REG(hw, E1000_CTRL_EXT, - ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); + ctrl_ext & ~E1000_CTRL_EXT_SDP3_DATA); E1000_WRITE_FLUSH(hw); msec_delay(300); @@ -677,7 +677,7 @@ STATIC s32 e1000_get_phy_id_82575(struct e1000_hw *hw) break; } else { DEBUGOUT1("PHY address %u was unreadable\n", - phy->addr); + phy->addr); } } @@ -763,22 +763,22 @@ STATIC s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) if (active) { data |= IGP02E1000_PM_D0_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); if (ret_val) goto out; /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); if (ret_val) goto out; } else { data &= ~IGP02E1000_PM_D0_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); /* * LPLU and SmartSpeed are mutually exclusive. LPLU is used * during Dx states where the power conservation is most @@ -787,28 +787,28 @@ STATIC s32 e1000_set_d0_lplu_state_82575(struct e1000_hw *hw, bool active) */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) goto out; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) goto out; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) goto out; } @@ -859,7 +859,7 @@ STATIC s32 e1000_set_d0_lplu_state_82580(struct e1000_hw *hw, bool active) data |= E1000_82580_PM_SPD; else if (phy->smart_speed == e1000_smart_speed_off) data &= ~E1000_82580_PM_SPD; - } + } E1000_WRITE_REG(hw, E1000_82580_PHY_POWER_MGMT, data); return ret_val; @@ -902,8 +902,8 @@ s32 e1000_set_d3_lplu_state_82580(struct e1000_hw *hw, bool active) else if (phy->smart_speed == e1000_smart_speed_off) data &= ~E1000_82580_PM_SPD; } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { data |= E1000_82580_PM_D3_LPLU; /* When LPLU is enabled, we should disable SmartSpeed */ data &= ~E1000_82580_PM_SPD; @@ -1109,7 +1109,7 @@ STATIC s32 e1000_get_cfg_done_82575(struct e1000_hw *hw) * Otherwise, use the generic function to get the link speed and duplex info. **/ STATIC s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, - u16 *duplex) + u16 *duplex) { s32 ret_val; @@ -1117,10 +1117,10 @@ STATIC s32 e1000_get_link_up_info_82575(struct e1000_hw *hw, u16 *speed, if (hw->phy.media_type != e1000_media_type_copper) ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, speed, - duplex); + duplex); else ret_val = e1000_get_speed_and_duplex_copper_generic(hw, speed, - duplex); + duplex); return ret_val; } @@ -1141,7 +1141,7 @@ STATIC s32 e1000_check_for_link_82575(struct e1000_hw *hw) if (hw->phy.media_type != e1000_media_type_copper) { ret_val = e1000_get_pcs_speed_and_duplex_82575(hw, &speed, - &duplex); + &duplex); /* * Use this flag to determine if link needs to be checked or * not. If we have link clear the flag so that we do not @@ -1204,7 +1204,7 @@ STATIC void e1000_power_up_serdes_link_82575(struct e1000_hw *hw) * duplex, then store the values in the pointers provided. **/ static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, - u16 *speed, u16 *duplex) + u16 *speed, u16 *duplex) { struct e1000_mac_info *mac = &hw->mac; u32 pcs; @@ -1242,7 +1242,7 @@ static s32 e1000_get_pcs_speed_and_duplex_82575(struct e1000_hw *hw, mac->serdes_has_link = false; *speed = 0; *duplex = 0; - } + } return E1000_SUCCESS; } @@ -1413,7 +1413,7 @@ STATIC s32 e1000_init_hw_82575(struct e1000_hw *hw) STATIC s32 e1000_setup_copper_link_82575(struct e1000_hw *hw) { u32 ctrl; - s32 ret_val; + s32 ret_val; u32 phpm_reg; DEBUGFUNC("e1000_setup_copper_link_82575"); @@ -1550,7 +1550,7 @@ STATIC s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) * link either autoneg or be forced to 1000/Full */ ctrl_reg |= E1000_CTRL_SPD_1000 | E1000_CTRL_FRCSPD | - E1000_CTRL_FD | E1000_CTRL_FRCDPX; + E1000_CTRL_FD | E1000_CTRL_FRCDPX; /* set speed of 1000/Full if speed/duplex is forced */ reg |= E1000_PCS_LCTL_FSV_1000 | E1000_PCS_LCTL_FDV_FULL; @@ -1566,7 +1566,7 @@ STATIC s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) * However, both are supported by the hardware and some drivers/tools. */ reg &= ~(E1000_PCS_LCTL_AN_ENABLE | E1000_PCS_LCTL_FLV_LINK_UP | - E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); + E1000_PCS_LCTL_FSD | E1000_PCS_LCTL_FORCE_LINK); if (pcs_autoneg) { /* Set PCS register for autoneg */ @@ -1598,7 +1598,7 @@ STATIC s32 e1000_setup_serdes_link_82575(struct e1000_hw *hw) DEBUGOUT1("Configuring Autoneg:PCS_LCTL=0x%08X\n", reg); } else { /* Set PCS register for forced link */ - reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ + reg |= E1000_PCS_LCTL_FSD; /* Force Speed */ /* Force flow control for forced link */ reg |= E1000_PCS_LCTL_FORCE_FCTRL; @@ -2079,7 +2079,7 @@ void e1000_rx_fifo_flush_82575(struct e1000_hw *hw) for (i = 0; i < 4; i++) { rxdctl[i] = E1000_READ_REG(hw, E1000_RXDCTL(i)); E1000_WRITE_REG(hw, E1000_RXDCTL(i), - rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); + rxdctl[i] & ~E1000_RXDCTL_QUEUE_ENABLE); } /* Poll all queues to verify they have shut down */ for (ms_wait = 0; ms_wait < 10; ms_wait++) { @@ -2165,14 +2165,14 @@ STATIC s32 e1000_set_pcie_completion_timeout(struct e1000_hw *hw) * 16ms to 55ms */ ret_val = e1000_read_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); + &pcie_devctl2); if (ret_val) goto out; pcie_devctl2 |= PCIE_DEVICE_CONTROL2_16ms; ret_val = e1000_write_pcie_cap_reg(hw, PCIE_DEVICE_CONTROL2, - &pcie_devctl2); + &pcie_devctl2); out: /* disable completion timeout resend */ gcr &= ~E1000_GCR_CMPL_TMOUT_RESEND; @@ -2359,8 +2359,8 @@ STATIC s32 e1000_reset_mdicnfg_82580(struct e1000_hw *hw) goto out; ret_val = hw->nvm.ops.read(hw, NVM_INIT_CONTROL3_PORT_A + - NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, - &nvm_data); + NVM_82580_LAN_FUNC_OFFSET(hw->bus.func), 1, + &nvm_data); if (ret_val) { DEBUGOUT("NVM Read Error\n"); goto out; @@ -2551,7 +2551,7 @@ s32 e1000_update_nvm_checksum_with_offset(struct e1000_hw *hw, u16 offset) } checksum = (u16) NVM_SUM - checksum; ret_val = hw->nvm.ops.write(hw, (NVM_CHECKSUM_REG + offset), 1, - &checksum); + &checksum); if (ret_val) DEBUGOUT("NVM Write Error while updating checksum.\n"); @@ -2591,7 +2591,7 @@ STATIC s32 e1000_validate_nvm_checksum_82580(struct e1000_hw *hw) for (j = 0; j < eeprom_regions_count; j++) { nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); + nvm_offset); if (ret_val != E1000_SUCCESS) goto out; } @@ -2626,7 +2626,7 @@ STATIC s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) /* set compatibility bit to validate checksums appropriately */ nvm_data = nvm_data | NVM_COMPATIBILITY_BIT_MASK; ret_val = hw->nvm.ops.write(hw, NVM_COMPATIBILITY_REG_3, 1, - &nvm_data); + &nvm_data); if (ret_val) { DEBUGOUT("NVM Write Error while updating checksum compatibility bit.\n"); goto out; @@ -2638,7 +2638,7 @@ STATIC s32 e1000_update_nvm_checksum_82580(struct e1000_hw *hw) ret_val = e1000_update_nvm_checksum_with_offset(hw, nvm_offset); if (ret_val) goto out; - } + } out: return ret_val; @@ -2663,7 +2663,7 @@ STATIC s32 e1000_validate_nvm_checksum_i350(struct e1000_hw *hw) for (j = 0; j < 4; j++) { nvm_offset = NVM_82580_LAN_FUNC_OFFSET(j); ret_val = e1000_validate_nvm_checksum_with_offset(hw, - nvm_offset); + nvm_offset); if (ret_val != E1000_SUCCESS) goto out; } @@ -2725,7 +2725,7 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw) ipcnfg |= (E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); eeer |= (E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); + E1000_EEER_LPI_FC); /* This bit should not be set in normal operation. */ if (eee_su & E1000_EEE_SU_LPI_CLK_STP) @@ -2733,12 +2733,12 @@ s32 e1000_set_eee_i350(struct e1000_hw *hw) } else { ipcnfg &= ~(E1000_IPCNFG_EEE_1G_AN | E1000_IPCNFG_EEE_100M_AN); eeer &= ~(E1000_EEER_TX_LPI_EN | E1000_EEER_RX_LPI_EN | - E1000_EEER_LPI_FC); + E1000_EEER_LPI_FC); } E1000_WRITE_REG(hw, E1000_IPCNFG, ipcnfg); E1000_WRITE_REG(hw, E1000_EEER, eeer); - E1000_READ_REG(hw, E1000_IPCNFG); - E1000_READ_REG(hw, E1000_EEER); + E1000_READ_REG(hw, E1000_IPCNFG); + E1000_READ_REG(hw, E1000_EEER); out: return ret_val; diff --git a/lib/librte_pmd_e1000/e1000/e1000_82575.h b/lib/librte_pmd_e1000/e1000/e1000_82575.h index 0a144d7490..4e104c9d30 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_82575.h +++ b/lib/librte_pmd_e1000/e1000/e1000_82575.h @@ -34,10 +34,10 @@ POSSIBILITY OF SUCH DAMAGE. #ifndef _E1000_82575_H_ #define _E1000_82575_H_ -#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ - (ID_LED_DEF1_DEF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_OFF1_ON2)) +#define ID_LED_DEFAULT_82575_SERDES ((ID_LED_DEF1_DEF2 << 12) | \ + (ID_LED_DEF1_DEF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_OFF1_ON2)) /* * Receive Address Register Count * Number of high/low register pairs in the RAR. The RAR (Receive Address @@ -48,13 +48,13 @@ POSSIBILITY OF SUCH DAMAGE. * For 82576, there are an additional set of RARs that begin at an offset * separate from the first set of RARs. */ -#define E1000_RAR_ENTRIES_82575 16 -#define E1000_RAR_ENTRIES_82576 24 -#define E1000_RAR_ENTRIES_82580 24 -#define E1000_RAR_ENTRIES_I350 32 -#define E1000_SW_SYNCH_MB 0x00000100 -#define E1000_STAT_DEV_RST_SET 0x00100000 -#define E1000_CTRL_DEV_RST 0x20000000 +#define E1000_RAR_ENTRIES_82575 16 +#define E1000_RAR_ENTRIES_82576 24 +#define E1000_RAR_ENTRIES_82580 24 +#define E1000_RAR_ENTRIES_I350 32 +#define E1000_SW_SYNCH_MB 0x00000100 +#define E1000_STAT_DEV_RST_SET 0x00100000 +#define E1000_CTRL_DEV_RST 0x20000000 #ifdef E1000_BIT_FIELDS struct e1000_adv_data_desc { @@ -79,21 +79,21 @@ struct e1000_adv_data_desc { } upper; }; -#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ -#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ -#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ -#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ -#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ -#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ -#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ -#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ -#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ -#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ -#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ -#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ -#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ +#define E1000_TXD_DTYP_ADV_C 0x2 /* Advanced Context Descriptor */ +#define E1000_TXD_DTYP_ADV_D 0x3 /* Advanced Data Descriptor */ +#define E1000_ADV_TXD_CMD_DEXT 0x20 /* Descriptor extension (0 = legacy) */ +#define E1000_ADV_TUCMD_IPV4 0x2 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADV_TUCMD_IPV6 0x0 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADV_TUCMD_L4T_UDP 0x0 /* L4 Packet TYPE of UDP */ +#define E1000_ADV_TUCMD_L4T_TCP 0x4 /* L4 Packet TYPE of TCP */ +#define E1000_ADV_TUCMD_MKRREQ 0x10 /* Indicates markers are required */ +#define E1000_ADV_DCMD_EOP 0x1 /* End of Packet */ +#define E1000_ADV_DCMD_IFCS 0x2 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADV_DCMD_RS 0x8 /* Report Status */ +#define E1000_ADV_DCMD_VLE 0x40 /* Add VLAN tag */ +#define E1000_ADV_DCMD_TSE 0x80 /* TCP Seg enable */ /* Extended Device Control */ -#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ +#define E1000_CTRL_EXT_NSICR 0x00000001 /* Disable Intr Clear all on read */ struct e1000_adv_context_desc { union { @@ -122,78 +122,78 @@ struct e1000_adv_context_desc { #endif /* SRRCTL bit definitions */ -#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ -#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 -#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ -#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 -#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 -#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 #define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 -#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 -#define E1000_SRRCTL_TIMESTAMP 0x40000000 -#define E1000_SRRCTL_DROP_EN 0x80000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_TIMESTAMP 0x40000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 -#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F -#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 -#define E1000_TX_HEAD_WB_ENABLE 0x1 -#define E1000_TX_SEQNUM_WB_ENABLE 0x2 +#define E1000_TX_HEAD_WB_ENABLE 0x1 +#define E1000_TX_SEQNUM_WB_ENABLE 0x2 -#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 -#define E1000_MRQC_ENABLE_VMDQ 0x00000003 -#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 -#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 -#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 -#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 -#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 +#define E1000_MRQC_ENABLE_RSS_4Q 0x00000002 +#define E1000_MRQC_ENABLE_VMDQ 0x00000003 +#define E1000_MRQC_ENABLE_VMDQ_RSS_2Q 0x00000005 +#define E1000_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define E1000_MRQC_RSS_FIELD_IPV6_UDP_EX 0x01000000 +#define E1000_MRQC_ENABLE_RSS_8Q 0x00000002 -#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 +#define E1000_VMRCTL_MIRROR_PORT_SHIFT 8 #define E1000_VMRCTL_MIRROR_DSTPORT_MASK (7 << \ E1000_VMRCTL_MIRROR_PORT_SHIFT) -#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) -#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) -#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) +#define E1000_VMRCTL_POOL_MIRROR_ENABLE (1 << 0) +#define E1000_VMRCTL_UPLINK_MIRROR_ENABLE (1 << 1) +#define E1000_VMRCTL_DOWNLINK_MIRROR_ENABLE (1 << 2) #define E1000_EICR_TX_QUEUE ( \ - E1000_EICR_TX_QUEUE0 | \ - E1000_EICR_TX_QUEUE1 | \ - E1000_EICR_TX_QUEUE2 | \ - E1000_EICR_TX_QUEUE3) + E1000_EICR_TX_QUEUE0 | \ + E1000_EICR_TX_QUEUE1 | \ + E1000_EICR_TX_QUEUE2 | \ + E1000_EICR_TX_QUEUE3) #define E1000_EICR_RX_QUEUE ( \ - E1000_EICR_RX_QUEUE0 | \ - E1000_EICR_RX_QUEUE1 | \ - E1000_EICR_RX_QUEUE2 | \ - E1000_EICR_RX_QUEUE3) + E1000_EICR_RX_QUEUE0 | \ + E1000_EICR_RX_QUEUE1 | \ + E1000_EICR_RX_QUEUE2 | \ + E1000_EICR_RX_QUEUE3) -#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE -#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE +#define E1000_EIMS_RX_QUEUE E1000_EICR_RX_QUEUE +#define E1000_EIMS_TX_QUEUE E1000_EICR_TX_QUEUE #define EIMS_ENABLE_MASK ( \ - E1000_EIMS_RX_QUEUE | \ - E1000_EIMS_TX_QUEUE | \ - E1000_EIMS_TCP_TIMER | \ - E1000_EIMS_OTHER) + E1000_EIMS_RX_QUEUE | \ + E1000_EIMS_TX_QUEUE | \ + E1000_EIMS_TCP_TIMER | \ + E1000_EIMS_OTHER) /* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ -#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ -#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ -#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ -#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ -#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ -#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ -#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ -#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ -#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ -#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ +#define E1000_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define E1000_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define E1000_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define E1000_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define E1000_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define E1000_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define E1000_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define E1000_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define E1000_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define E1000_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of ctrl bits */ /* Receive Descriptor - Advanced */ union e1000_adv_rx_desc { struct { - __le64 pkt_addr; /* Packet buffer address */ - __le64 hdr_addr; /* Header buffer address */ + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ } read; struct { struct { @@ -206,74 +206,74 @@ union e1000_adv_rx_desc { } hs_rss; } lo_dword; union { - __le32 rss; /* RSS Hash */ + __le32 rss; /* RSS Hash */ struct { - __le16 ip_id; /* IP id */ - __le16 csum; /* Packet Checksum */ + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ } csum_ip; } hi_dword; } lower; struct { - __le32 status_error; /* ext status/error */ - __le16 length; /* Packet length */ - __le16 vlan; /* VLAN tag */ + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ } upper; } wb; /* writeback */ }; -#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F -#define E1000_RXDADV_RSSTYPE_SHIFT 12 -#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 -#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 -#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 -#define E1000_RXDADV_SPH 0x8000 -#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ -#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ -#define E1000_RXDADV_ERR_HBO 0x00800000 +#define E1000_RXDADV_RSSTYPE_MASK 0x0000000F +#define E1000_RXDADV_RSSTYPE_SHIFT 12 +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 +#define E1000_RXDADV_SPLITHEADER_EN 0x00001000 +#define E1000_RXDADV_SPH 0x8000 +#define E1000_RXDADV_STAT_TS 0x10000 /* Pkt was time stamped */ +#define E1000_RXDADV_STAT_TSIP 0x08000 /* timestamp in packet */ +#define E1000_RXDADV_ERR_HBO 0x00800000 /* RSS Hash results */ -#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 -#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 -#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 -#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 -#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 -#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 +#define E1000_RXDADV_RSSTYPE_NONE 0x00000000 +#define E1000_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define E1000_RXDADV_RSSTYPE_IPV4 0x00000002 +#define E1000_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define E1000_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define E1000_RXDADV_RSSTYPE_IPV6 0x00000005 #define E1000_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 -#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 -#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define E1000_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define E1000_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 #define E1000_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 /* RSS Packet Types as indicated in the receive descriptor */ -#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 -#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ -#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ -#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ -#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ -#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ -#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ -#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ -#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ - -#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ -#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ -#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ -#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ -#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ -#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ +#define E1000_RXDADV_PKTTYPE_NONE 0x00000000 +#define E1000_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPV4 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPV4 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPV6 hdr present */ +#define E1000_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPV6 hdr + extensions */ +#define E1000_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define E1000_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define E1000_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define E1000_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ + +#define E1000_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define E1000_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define E1000_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define E1000_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define E1000_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define E1000_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ /* LinkSec results */ /* Security Processing bit Indication */ -#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 -#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 -#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 -#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 -#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 - -#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 -#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 -#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 -#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 -#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 +#define E1000_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define E1000_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define E1000_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +#define E1000_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define E1000_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define E1000_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define E1000_RXDADV_IPSEC_ERROR_AUTHENTICATION_FAILED 0x18000000 /* Transmit Descriptor - Advanced */ union e1000_adv_tx_desc { @@ -290,26 +290,26 @@ union e1000_adv_tx_desc { }; /* Adv Transmit Descriptor Config Masks */ -#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ -#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ -#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ -#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ -#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ -#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ -#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ -#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ #define E1000_ADVTXD_MAC_LINKSEC 0x00040000 /* Apply LinkSec on pkt */ #define E1000_ADVTXD_MAC_TSTAMP 0x00080000 /* IEEE1588 Timestamp pkt */ #define E1000_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED prsnt in WB */ -#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ -#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ -#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ -#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +#define E1000_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define E1000_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define E1000_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ /* 1st & Last TSO-full iSCSI PDU*/ #define E1000_ADVTXD_POPTS_ISCO_FULL 0x00001800 -#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ -#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ +#define E1000_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ /* Context descriptors */ struct e1000_adv_tx_context_desc { @@ -319,66 +319,66 @@ struct e1000_adv_tx_context_desc { __le32 mss_l4len_idx; }; -#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ -#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ -#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ -#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ -#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ -#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ -#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ -#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define E1000_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define E1000_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ /* IPSec Encrypt Enable for ESP */ -#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 +#define E1000_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000 /* Req requires Markers and CRC */ #define E1000_ADVTXD_TUCMD_MKRREQ 0x00002000 -#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ -#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ /* Adv ctxt IPSec SA IDX mask */ -#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF +#define E1000_ADVTXD_IPSEC_SA_INDEX_MASK 0x000000FF /* Adv ctxt IPSec ESP len mask */ -#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF +#define E1000_ADVTXD_IPSEC_ESP_LEN_MASK 0x000000FF /* Additional Transmit Descriptor Control definitions */ #define E1000_TXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Tx Queue */ #define E1000_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. wbk flushing */ /* Tx Queue Arbitration Priority 0=low, 1=high */ -#define E1000_TXDCTL_PRIORITY 0x08000000 +#define E1000_TXDCTL_PRIORITY 0x08000000 /* Additional Receive Descriptor Control definitions */ #define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ #define E1000_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. wbk flushing */ /* Direct Cache Access (DCA) definitions */ -#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ -#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ +#define E1000_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define E1000_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ -#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ -#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ +#define E1000_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define E1000_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ -#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ -#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define E1000_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define E1000_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define E1000_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header ena */ #define E1000_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload ena */ -#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ -#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ -#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define E1000_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define E1000_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define E1000_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ -#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ -#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ -#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ -#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ +#define E1000_DCA_TXCTRL_CPUID_MASK_82576 0xFF000000 /* Tx CPUID Mask */ +#define E1000_DCA_RXCTRL_CPUID_MASK_82576 0xFF000000 /* Rx CPUID Mask */ +#define E1000_DCA_TXCTRL_CPUID_SHIFT_82576 24 /* Tx CPUID */ +#define E1000_DCA_RXCTRL_CPUID_SHIFT_82576 24 /* Rx CPUID */ /* Additional interrupt register bit definitions */ -#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ -#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ -#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ +#define E1000_ICR_LSECPNS 0x00000020 /* PN threshold - server */ +#define E1000_IMS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ +#define E1000_ICS_LSECPNS E1000_ICR_LSECPNS /* PN threshold - server */ /* ETQF register bit definitions */ -#define E1000_ETQF_FILTER_ENABLE (1 << 26) -#define E1000_ETQF_IMM_INT (1 << 29) -#define E1000_ETQF_1588 (1 << 30) -#define E1000_ETQF_QUEUE_ENABLE (1 << 31) +#define E1000_ETQF_FILTER_ENABLE (1 << 26) +#define E1000_ETQF_IMM_INT (1 << 29) +#define E1000_ETQF_1588 (1 << 30) +#define E1000_ETQF_QUEUE_ENABLE (1 << 31) /* * ETQF filter list: one static filter per filter consumer. This is * to avoid filter collisions later. Add new filters @@ -387,89 +387,89 @@ struct e1000_adv_tx_context_desc { * Current filters: * EAPOL 802.1x (0x888e): Filter 0 */ -#define E1000_ETQF_FILTER_EAPOL 0 +#define E1000_ETQF_FILTER_EAPOL 0 -#define E1000_FTQF_VF_BP 0x00008000 -#define E1000_FTQF_1588_TIME_STAMP 0x08000000 -#define E1000_FTQF_MASK 0xF0000000 -#define E1000_FTQF_MASK_PROTO_BP 0x10000000 -#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 -#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 -#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 +#define E1000_FTQF_VF_BP 0x00008000 +#define E1000_FTQF_1588_TIME_STAMP 0x08000000 +#define E1000_FTQF_MASK 0xF0000000 +#define E1000_FTQF_MASK_PROTO_BP 0x10000000 +#define E1000_FTQF_MASK_SOURCE_ADDR_BP 0x20000000 +#define E1000_FTQF_MASK_DEST_ADDR_BP 0x40000000 +#define E1000_FTQF_MASK_SOURCE_PORT_BP 0x80000000 -#define E1000_NVM_APME_82575 0x0400 +#define E1000_NVM_APME_82575 0x0400 #define MAX_NUM_VFS 7 #define E1000_DTXSWC_MAC_SPOOF_MASK 0x000000FF /* Per VF MAC spoof cntrl */ #define E1000_DTXSWC_VLAN_SPOOF_MASK 0x0000FF00 /* Per VF VLAN spoof cntrl */ -#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ -#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 -#define E1000_DTXSWC_LLE_SHIFT 16 -#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ +#define E1000_DTXSWC_LLE_MASK 0x00FF0000 /* Per VF Local LB enables */ +#define E1000_DTXSWC_VLAN_SPOOF_SHIFT 8 +#define E1000_DTXSWC_LLE_SHIFT 16 +#define E1000_DTXSWC_VMDQ_LOOPBACK_EN (1 << 31) /* global VF LB enable */ /* Easy defines for setting default pool, would normally be left a zero */ -#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 -#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) +#define E1000_VT_CTL_DEFAULT_POOL_SHIFT 7 +#define E1000_VT_CTL_DEFAULT_POOL_MASK (0x7 << E1000_VT_CTL_DEFAULT_POOL_SHIFT) /* Other useful VMD_CTL register defines */ -#define E1000_VT_CTL_IGNORE_MAC (1 << 28) -#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) -#define E1000_VT_CTL_VM_REPL_EN (1 << 30) +#define E1000_VT_CTL_IGNORE_MAC (1 << 28) +#define E1000_VT_CTL_DISABLE_DEF_POOL (1 << 29) +#define E1000_VT_CTL_VM_REPL_EN (1 << 30) /* Per VM Offload register setup */ -#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ -#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ -#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ -#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ -#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ -#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ -#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ -#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ -#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ -#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ - -#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ -#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ -#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ -#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ -#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ - -#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ -#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ - -#define E1000_VLVF_ARRAY_SIZE 32 -#define E1000_VLVF_VLANID_MASK 0x00000FFF -#define E1000_VLVF_POOLSEL_SHIFT 12 -#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) -#define E1000_VLVF_LVLAN 0x00100000 -#define E1000_VLVF_VLANID_ENABLE 0x80000000 - -#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ -#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ - -#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ - -#define E1000_IOVCTL 0x05BBC -#define E1000_IOVCTL_REUSE_VFQ 0x00000001 - -#define E1000_RPLOLR_STRVLAN 0x40000000 -#define E1000_RPLOLR_STRCRC 0x80000000 - -#define E1000_TCTL_EXT_COLD 0x000FFC00 -#define E1000_TCTL_EXT_COLD_SHIFT 10 - -#define E1000_DTXCTL_8023LL 0x0004 -#define E1000_DTXCTL_VLAN_ADDED 0x0008 -#define E1000_DTXCTL_OOS_ENABLE 0x0010 -#define E1000_DTXCTL_MDP_EN 0x0020 -#define E1000_DTXCTL_SPOOF_INT 0x0040 +#define E1000_VMOLR_RLPML_MASK 0x00003FFF /* Long Packet Maximum Length mask */ +#define E1000_VMOLR_LPE 0x00010000 /* Accept Long packet */ +#define E1000_VMOLR_RSSE 0x00020000 /* Enable RSS */ +#define E1000_VMOLR_AUPE 0x01000000 /* Accept untagged packets */ +#define E1000_VMOLR_ROMPE 0x02000000 /* Accept overflow multicast */ +#define E1000_VMOLR_ROPE 0x04000000 /* Accept overflow unicast */ +#define E1000_VMOLR_BAM 0x08000000 /* Accept Broadcast packets */ +#define E1000_VMOLR_MPME 0x10000000 /* Multicast promiscuous mode */ +#define E1000_VMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_VMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_VMOLR_VPE 0x00800000 /* VLAN promiscuous enable */ +#define E1000_VMOLR_UPE 0x20000000 /* Unicast promisuous enable */ +#define E1000_DVMOLR_HIDVLAN 0x20000000 /* Vlan hiding enable */ +#define E1000_DVMOLR_STRVLAN 0x40000000 /* Vlan stripping enable */ +#define E1000_DVMOLR_STRCRC 0x80000000 /* CRC stripping enable */ + +#define E1000_PBRWAC_WALPB 0x00000007 /* Wrap around event on LAN Rx PB */ +#define E1000_PBRWAC_PBE 0x00000008 /* Rx packet buffer empty */ + +#define E1000_VLVF_ARRAY_SIZE 32 +#define E1000_VLVF_VLANID_MASK 0x00000FFF +#define E1000_VLVF_POOLSEL_SHIFT 12 +#define E1000_VLVF_POOLSEL_MASK (0xFF << E1000_VLVF_POOLSEL_SHIFT) +#define E1000_VLVF_LVLAN 0x00100000 +#define E1000_VLVF_VLANID_ENABLE 0x80000000 + +#define E1000_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define E1000_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define E1000_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +#define E1000_IOVCTL 0x05BBC +#define E1000_IOVCTL_REUSE_VFQ 0x00000001 + +#define E1000_RPLOLR_STRVLAN 0x40000000 +#define E1000_RPLOLR_STRCRC 0x80000000 + +#define E1000_TCTL_EXT_COLD 0x000FFC00 +#define E1000_TCTL_EXT_COLD_SHIFT 10 + +#define E1000_DTXCTL_8023LL 0x0004 +#define E1000_DTXCTL_VLAN_ADDED 0x0008 +#define E1000_DTXCTL_OOS_ENABLE 0x0010 +#define E1000_DTXCTL_MDP_EN 0x0020 +#define E1000_DTXCTL_SPOOF_INT 0x0040 #define E1000_EEPROM_PCS_AUTONEG_DISABLE_BIT (1 << 14) -#define ALL_QUEUES 0xFFFF +#define ALL_QUEUES 0xFFFF /* Rx packet buffer size defines */ -#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F +#define E1000_RXPBS_SIZE_MASK_82576 0x0000007F void e1000_vmdq_set_loopback_pf(struct e1000_hw *hw, bool enable); void e1000_vmdq_set_anti_spoofing_pf(struct e1000_hw *hw, bool enable, int pf); void e1000_vmdq_set_replication_pf(struct e1000_hw *hw, bool enable); diff --git a/lib/librte_pmd_e1000/e1000/e1000_api.c b/lib/librte_pmd_e1000/e1000/e1000_api.c index b2125e2f53..46364bd31b 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_api.c +++ b/lib/librte_pmd_e1000/e1000/e1000_api.c @@ -356,9 +356,9 @@ s32 e1000_set_mac_type(struct e1000_hw *hw) * @hw: pointer to the HW structure * @init_device: true will initialize the rest of the function pointers * getting the device ready for use. false will only set - * MAC type and the function pointers for the other init + * MAC type and the function pointers for the other init * functions. Passing false will not generate any hardware - * reads or writes. + * reads or writes. * * This function must be called by a driver in order to use the rest * of the 'shared' code files. Called by drivers only. @@ -534,11 +534,11 @@ void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value) * The caller must have a packed mc_addr_list of multicast addresses. **/ void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, - u32 mc_addr_count) + u32 mc_addr_count) { if (hw->mac.ops.update_mc_addr_list) hw->mac.ops.update_mc_addr_list(hw, mc_addr_list, - mc_addr_count); + mc_addr_count); } /** @@ -873,11 +873,11 @@ bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) * way. Also fills up the sum of the buffer in *buffer parameter. **/ s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, - u16 offset, u8 *sum) + u16 offset, u8 *sum) { if (hw->mac.ops.mng_host_if_write) return hw->mac.ops.mng_host_if_write(hw, buffer, length, - offset, sum); + offset, sum); return E1000_NOT_IMPLEMENTED; } @@ -890,7 +890,7 @@ s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, * Writes the command header after does the checksum calculation. **/ s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) + struct e1000_host_mng_command_header *hdr) { if (hw->mac.ops.mng_write_cmd_header) return hw->mac.ops.mng_write_cmd_header(hw, hdr); @@ -1293,7 +1293,7 @@ s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * This is a function pointer entry point called by drivers. **/ s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, - u8 data) + u8 data) { return e1000_write_8bit_ctrl_reg_generic(hw, reg, offset, data); } diff --git a/lib/librte_pmd_e1000/e1000/e1000_api.h b/lib/librte_pmd_e1000/e1000/e1000_api.h index 4cbbdd8ada..aafa35ebd4 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_api.h +++ b/lib/librte_pmd_e1000/e1000/e1000_api.h @@ -43,78 +43,78 @@ extern void e1000_init_function_pointers_82571(struct e1000_hw *hw); extern void e1000_init_function_pointers_82541(struct e1000_hw *hw); extern void e1000_init_function_pointers_80003es2lan(struct e1000_hw *hw); extern void e1000_init_function_pointers_ich8lan(struct e1000_hw *hw); -extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); -extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); -extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); -extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); -extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_init_function_pointers_82575(struct e1000_hw *hw); +extern void e1000_rx_fifo_flush_82575(struct e1000_hw *hw); +extern void e1000_init_function_pointers_vf(struct e1000_hw *hw); +extern void e1000_power_up_fiber_serdes_link(struct e1000_hw *hw); +extern void e1000_shutdown_fiber_serdes_link(struct e1000_hw *hw); extern void e1000_init_function_pointers_i210(struct e1000_hw *hw); s32 e1000_set_obff_timer(struct e1000_hw *hw, u32 itr); -s32 e1000_set_mac_type(struct e1000_hw *hw); -s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); -s32 e1000_init_mac_params(struct e1000_hw *hw); -s32 e1000_init_nvm_params(struct e1000_hw *hw); -s32 e1000_init_phy_params(struct e1000_hw *hw); -s32 e1000_init_mbx_params(struct e1000_hw *hw); -s32 e1000_get_bus_info(struct e1000_hw *hw); +s32 e1000_set_mac_type(struct e1000_hw *hw); +s32 e1000_setup_init_funcs(struct e1000_hw *hw, bool init_device); +s32 e1000_init_mac_params(struct e1000_hw *hw); +s32 e1000_init_nvm_params(struct e1000_hw *hw); +s32 e1000_init_phy_params(struct e1000_hw *hw); +s32 e1000_init_mbx_params(struct e1000_hw *hw); +s32 e1000_get_bus_info(struct e1000_hw *hw); void e1000_clear_vfta(struct e1000_hw *hw); void e1000_write_vfta(struct e1000_hw *hw, u32 offset, u32 value); -s32 e1000_force_mac_fc(struct e1000_hw *hw); -s32 e1000_check_for_link(struct e1000_hw *hw); -s32 e1000_reset_hw(struct e1000_hw *hw); -s32 e1000_init_hw(struct e1000_hw *hw); -s32 e1000_setup_link(struct e1000_hw *hw); +s32 e1000_force_mac_fc(struct e1000_hw *hw); +s32 e1000_check_for_link(struct e1000_hw *hw); +s32 e1000_reset_hw(struct e1000_hw *hw); +s32 e1000_init_hw(struct e1000_hw *hw); +s32 e1000_setup_link(struct e1000_hw *hw); s32 e1000_get_speed_and_duplex(struct e1000_hw *hw, u16 *speed, u16 *duplex); -s32 e1000_disable_pcie_master(struct e1000_hw *hw); +s32 e1000_disable_pcie_master(struct e1000_hw *hw); void e1000_config_collision_dist(struct e1000_hw *hw); void e1000_rar_set(struct e1000_hw *hw, u8 *addr, u32 index); -u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); +u32 e1000_hash_mc_addr(struct e1000_hw *hw, u8 *mc_addr); void e1000_update_mc_addr_list(struct e1000_hw *hw, u8 *mc_addr_list, u32 mc_addr_count); -s32 e1000_setup_led(struct e1000_hw *hw); -s32 e1000_cleanup_led(struct e1000_hw *hw); -s32 e1000_check_reset_block(struct e1000_hw *hw); -s32 e1000_blink_led(struct e1000_hw *hw); -s32 e1000_led_on(struct e1000_hw *hw); -s32 e1000_led_off(struct e1000_hw *hw); +s32 e1000_setup_led(struct e1000_hw *hw); +s32 e1000_cleanup_led(struct e1000_hw *hw); +s32 e1000_check_reset_block(struct e1000_hw *hw); +s32 e1000_blink_led(struct e1000_hw *hw); +s32 e1000_led_on(struct e1000_hw *hw); +s32 e1000_led_off(struct e1000_hw *hw); s32 e1000_id_led_init(struct e1000_hw *hw); void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); -s32 e1000_get_cable_length(struct e1000_hw *hw); -s32 e1000_validate_mdi_setting(struct e1000_hw *hw); -s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_get_cable_length(struct e1000_hw *hw); +s32 e1000_validate_mdi_setting(struct e1000_hw *hw); +s32 e1000_read_phy_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_phy_reg(struct e1000_hw *hw, u32 offset, u16 data); s32 e1000_write_8bit_ctrl_reg(struct e1000_hw *hw, u32 reg, u32 offset, u8 data); -s32 e1000_get_phy_info(struct e1000_hw *hw); +s32 e1000_get_phy_info(struct e1000_hw *hw); void e1000_release_phy(struct e1000_hw *hw); -s32 e1000_acquire_phy(struct e1000_hw *hw); -s32 e1000_cfg_on_link_up(struct e1000_hw *hw); -s32 e1000_phy_hw_reset(struct e1000_hw *hw); -s32 e1000_phy_commit(struct e1000_hw *hw); +s32 e1000_acquire_phy(struct e1000_hw *hw); +s32 e1000_cfg_on_link_up(struct e1000_hw *hw); +s32 e1000_phy_hw_reset(struct e1000_hw *hw); +s32 e1000_phy_commit(struct e1000_hw *hw); void e1000_power_up_phy(struct e1000_hw *hw); void e1000_power_down_phy(struct e1000_hw *hw); -s32 e1000_read_mac_addr(struct e1000_hw *hw); +s32 e1000_read_mac_addr(struct e1000_hw *hw); s32 e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, u32 pba_num_size); -s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); +s32 e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size); void e1000_reload_nvm(struct e1000_hw *hw); -s32 e1000_update_nvm_checksum(struct e1000_hw *hw); -s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); -s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); -s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); +s32 e1000_update_nvm_checksum(struct e1000_hw *hw); +s32 e1000_validate_nvm_checksum(struct e1000_hw *hw); +s32 e1000_read_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); +s32 e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data); +s32 e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data); s32 e1000_write_nvm(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); -s32 e1000_wait_autoneg(struct e1000_hw *hw); -s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); -s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_wait_autoneg(struct e1000_hw *hw); +s32 e1000_set_d3_lplu_state(struct e1000_hw *hw, bool active); +s32 e1000_set_d0_lplu_state(struct e1000_hw *hw, bool active); bool e1000_check_mng_mode(struct e1000_hw *hw); bool e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); -s32 e1000_mng_enable_host_if(struct e1000_hw *hw); +s32 e1000_mng_enable_host_if(struct e1000_hw *hw); s32 e1000_mng_host_if_write(struct e1000_hw *hw, u8 *buffer, u16 length, u16 offset, u8 *sum); -s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr); +s32 e1000_mng_write_cmd_header(struct e1000_hw *hw, + struct e1000_host_mng_command_header *hdr); s32 e1000_mng_write_dhcp_info(struct e1000_hw *hw, u8 *buffer, u16 length); u32 e1000_translate_register_82542(u32 reg); @@ -153,14 +153,14 @@ u32 e1000_translate_register_82542(u32 reg); #define TBI_ACCEPT(a, status, errors, length, last_byte, \ min_frame_size, max_frame_size) \ - (e1000_tbi_sbp_enabled_82543(a) && \ - (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ - ((last_byte) == CARRIER_EXTENSION) && \ - (((status) & E1000_RXD_STAT_VP) ? \ - (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \ - ((length) <= (max_frame_size + 1))) : \ - (((length) > min_frame_size) && \ - ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1))))) + (e1000_tbi_sbp_enabled_82543(a) && \ + (((errors) & E1000_RXD_ERR_FRAME_ERR_MASK) == E1000_RXD_ERR_CE) && \ + ((last_byte) == CARRIER_EXTENSION) && \ + (((status) & E1000_RXD_STAT_VP) ? \ + (((length) > (min_frame_size - VLAN_TAG_SIZE)) && \ + ((length) <= (max_frame_size + 1))) : \ + (((length) > min_frame_size) && \ + ((length) <= (max_frame_size + VLAN_TAG_SIZE + 1))))) #define E1000_MAX(a, b) ((a) > (b) ? (a) : (b)) #define E1000_DIVIDE_ROUND_UP(a, b) (((a) + (b) - 1) / (b)) /* ceil(a/b) */ diff --git a/lib/librte_pmd_e1000/e1000/e1000_defines.h b/lib/librte_pmd_e1000/e1000/e1000_defines.h index 63393700c3..d549fdc473 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_defines.h +++ b/lib/librte_pmd_e1000/e1000/e1000_defines.h @@ -40,27 +40,27 @@ POSSIBILITY OF SUCH DAMAGE. /* Definitions for power management and wakeup registers */ /* Wake Up Control */ -#define E1000_WUC_APME 0x00000001 /* APM Enable */ -#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ -#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ -#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ -#define E1000_WUC_LSCWE 0x00000010 /* Link Status wake up enable */ -#define E1000_WUC_PPROXYE 0x00000010 /* Protocol Proxy Enable */ -#define E1000_WUC_LSCWO 0x00000020 /* Link Status wake up override */ -#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ -#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ +#define E1000_WUC_APME 0x00000001 /* APM Enable */ +#define E1000_WUC_PME_EN 0x00000002 /* PME Enable */ +#define E1000_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define E1000_WUC_APMPME 0x00000008 /* Assert PME on APM Wakeup */ +#define E1000_WUC_LSCWE 0x00000010 /* Link Status wake up enable */ +#define E1000_WUC_PPROXYE 0x00000010 /* Protocol Proxy Enable */ +#define E1000_WUC_LSCWO 0x00000020 /* Link Status wake up override */ +#define E1000_WUC_SPM 0x80000000 /* Enable SPM */ +#define E1000_WUC_PHY_WAKE 0x00000100 /* if PHY supports wakeup */ #define E1000_WUC_FLX6_PHY 0x4000 /* Flexible Filter 6 Enable */ #define E1000_WUC_FLX7_PHY 0x8000 /* Flexible Filter 7 Enable */ /* Wake Up Filter Control */ -#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ -#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ -#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ -#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ -#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ -#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ -#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ -#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define E1000_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define E1000_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define E1000_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define E1000_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ #define E1000_WUFC_IGNORE_TCO_PHY 0x00000800 /* Ignore WakeOn TCO packets */ #define E1000_WUFC_FLX0_PHY 0x00001000 /* Flexible Filter 0 Enable */ #define E1000_WUFC_FLX1_PHY 0x00002000 /* Flexible Filter 1 Enable */ @@ -68,16 +68,16 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_WUFC_FLX3_PHY 0x00008000 /* Flexible Filter 3 Enable */ #define E1000_WUFC_FLX4_PHY 0x00000200 /* Flexible Filter 4 Enable */ #define E1000_WUFC_FLX5_PHY 0x00000400 /* Flexible Filter 5 Enable */ -#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ -#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ -#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ -#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ -#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define E1000_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ #define E1000_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */ #define E1000_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */ #define E1000_WUFC_FLX6 0x00400000 /* Flexible Filter 6 Enable */ #define E1000_WUFC_FLX7 0x00800000 /* Flexible Filter 7 Enable */ -#define E1000_WUFC_FW_RST 0x80000000 /* Wake on FW Reset Enable */ +#define E1000_WUFC_FW_RST 0x80000000 /* Wake on FW Reset Enable */ #define E1000_WUFC_ALL_FILTERS_PHY_4 0x0000F0FF /* wakeup filters mask */ #define E1000_WUFC_FLX_OFFSET_PHY 12 /* Flexible Filters bits offset */ #define E1000_WUFC_FLX_FILTERS_PHY_4 0x0000F000 /* 4 flexible filters mask */ @@ -94,26 +94,26 @@ POSSIBILITY OF SUCH DAMAGE. * For 82576 to utilize Extended filter masks in addition to * existing (filter) masks */ -#define E1000_WUFC_EXT_FLX_FILTERS 0x00300000 /* Ext. FLX filter mask */ +#define E1000_WUFC_EXT_FLX_FILTERS 0x00300000 /* Ext. FLX filter mask */ /* Wake Up Status */ -#define E1000_WUS_LNKC E1000_WUFC_LNKC -#define E1000_WUS_MAG E1000_WUFC_MAG -#define E1000_WUS_EX E1000_WUFC_EX -#define E1000_WUS_MC E1000_WUFC_MC -#define E1000_WUS_BC E1000_WUFC_BC -#define E1000_WUS_ARP E1000_WUFC_ARP -#define E1000_WUS_IPV4 E1000_WUFC_IPV4 -#define E1000_WUS_IPV6 E1000_WUFC_IPV6 +#define E1000_WUS_LNKC E1000_WUFC_LNKC +#define E1000_WUS_MAG E1000_WUFC_MAG +#define E1000_WUS_EX E1000_WUFC_EX +#define E1000_WUS_MC E1000_WUFC_MC +#define E1000_WUS_BC E1000_WUFC_BC +#define E1000_WUS_ARP E1000_WUFC_ARP +#define E1000_WUS_IPV4 E1000_WUFC_IPV4 +#define E1000_WUS_IPV6 E1000_WUFC_IPV6 #define E1000_WUS_FLX0_PHY E1000_WUFC_FLX0_PHY #define E1000_WUS_FLX1_PHY E1000_WUFC_FLX1_PHY #define E1000_WUS_FLX2_PHY E1000_WUFC_FLX2_PHY #define E1000_WUS_FLX3_PHY E1000_WUFC_FLX3_PHY #define E1000_WUS_FLX_FILTERS_PHY_4 E1000_WUFC_FLX_FILTERS_PHY_4 -#define E1000_WUS_FLX0 E1000_WUFC_FLX0 -#define E1000_WUS_FLX1 E1000_WUFC_FLX1 -#define E1000_WUS_FLX2 E1000_WUFC_FLX2 -#define E1000_WUS_FLX3 E1000_WUFC_FLX3 +#define E1000_WUS_FLX0 E1000_WUFC_FLX0 +#define E1000_WUS_FLX1 E1000_WUFC_FLX1 +#define E1000_WUS_FLX2 E1000_WUFC_FLX2 +#define E1000_WUS_FLX3 E1000_WUFC_FLX3 #define E1000_WUS_FLX4 E1000_WUFC_FLX4 #define E1000_WUS_FLX5 E1000_WUFC_FLX5 #define E1000_WUS_FLX6 E1000_WUFC_FLX6 @@ -122,78 +122,78 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_WUS_FLX5_PHY E1000_WUFC_FLX5_PHY #define E1000_WUS_FLX6_PHY 0x0400 #define E1000_WUS_FLX7_PHY 0x0800 -#define E1000_WUS_FLX_FILTERS E1000_WUFC_FLX_FILTERS +#define E1000_WUS_FLX_FILTERS E1000_WUFC_FLX_FILTERS #define E1000_WUS_FLX_FILTERS_6 E1000_WUFC_FLX_FILTERS_6 #define E1000_WUS_FLX_FILTERS_8 E1000_WUFC_FLX_FILTERS_8 #define E1000_WUS_FLX_FILTERS_PHY_6 E1000_WUFC_FLX_FILTERS_PHY_6 /* Wake Up Packet Length */ -#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ +#define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ /* Four Flexible Filters are supported */ -#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4 +#define E1000_FLEXIBLE_FILTER_COUNT_MAX 4 /* Six Flexible Filters are supported */ #define E1000_FLEXIBLE_FILTER_COUNT_MAX_6 6 /* Eight Flexible Filters are supported */ #define E1000_FLEXIBLE_FILTER_COUNT_MAX_8 8 /* Two Extended Flexible Filters are supported (82576) */ -#define E1000_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 -#define E1000_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ -#define E1000_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ +#define E1000_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 +#define E1000_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ +#define E1000_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ /* Each Flexible Filter is at most 128 (0x80) bytes in length */ -#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128 +#define E1000_FLEXIBLE_FILTER_SIZE_MAX 128 -#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX +#define E1000_FFLT_SIZE E1000_FLEXIBLE_FILTER_COUNT_MAX #define E1000_FFLT_SIZE_6 E1000_FLEXIBLE_FILTER_COUNT_MAX_6 #define E1000_FFLT_SIZE_8 E1000_FLEXIBLE_FILTER_COUNT_MAX_8 -#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX -#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX +#define E1000_FFMT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX +#define E1000_FFVT_SIZE E1000_FLEXIBLE_FILTER_SIZE_MAX /* Extended Device Control */ -#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ -#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ -#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN -#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ -#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ +#define E1000_CTRL_EXT_GPI0_EN 0x00000001 /* Maps SDP4 to GPI0 */ +#define E1000_CTRL_EXT_GPI1_EN 0x00000002 /* Maps SDP5 to GPI1 */ +#define E1000_CTRL_EXT_PHYINT_EN E1000_CTRL_EXT_GPI1_EN +#define E1000_CTRL_EXT_GPI2_EN 0x00000004 /* Maps SDP6 to GPI2 */ +#define E1000_CTRL_EXT_GPI3_EN 0x00000008 /* Maps SDP7 to GPI3 */ /* Reserved (bits 4,5) in >= 82575 */ #define E1000_CTRL_EXT_SDP4_DATA 0x00000010 /* SW Definable Pin 4 data */ #define E1000_CTRL_EXT_SDP5_DATA 0x00000020 /* SW Definable Pin 5 data */ -#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA +#define E1000_CTRL_EXT_PHY_INT E1000_CTRL_EXT_SDP5_DATA #define E1000_CTRL_EXT_SDP6_DATA 0x00000040 /* SW Definable Pin 6 data */ #define E1000_CTRL_EXT_SDP3_DATA 0x00000080 /* SW Definable Pin 3 data */ /* SDP 4/5 (bits 8,9) are reserved in >= 82575 */ -#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ -#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ -#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ -#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ -#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ -#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ -#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ +#define E1000_CTRL_EXT_SDP4_DIR 0x00000100 /* Direction of SDP4 0=in 1=out */ +#define E1000_CTRL_EXT_SDP5_DIR 0x00000200 /* Direction of SDP5 0=in 1=out */ +#define E1000_CTRL_EXT_SDP6_DIR 0x00000400 /* Direction of SDP6 0=in 1=out */ +#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* Direction of SDP3 0=in 1=out */ +#define E1000_CTRL_EXT_ASDCHK 0x00001000 /* Initiate an ASD sequence */ +#define E1000_CTRL_EXT_EE_RST 0x00002000 /* Reinitialize from EEPROM */ +#define E1000_CTRL_EXT_IPS 0x00004000 /* Invert Power State */ /* Physical Func Reset Done Indication */ -#define E1000_CTRL_EXT_PFRSTD 0x00004000 -#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ -#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define E1000_CTRL_EXT_PFRSTD 0x00004000 +#define E1000_CTRL_EXT_SPD_BYPS 0x00008000 /* Speed Select Bypass */ +#define E1000_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ #define E1000_CTRL_EXT_DMA_DYN_CLK_EN 0x00080000 /* DMA Dynamic Clk Gating */ -#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000 /* Offset of the link mode field in Ctrl Ext register */ #define E1000_CTRL_EXT_LINK_MODE_OFFSET 22 -#define E1000_CTRL_EXT_LINK_MODE_82580_MASK 0x01C00000 /*82580 bit 24:22*/ -#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 -#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 -#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 -#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 -#define E1000_CTRL_EXT_LINK_MODE_PCIX_SERDES 0x00800000 -#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 -#define E1000_CTRL_EXT_EIAME 0x01000000 -#define E1000_CTRL_EXT_IRCA 0x00000001 -#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 -#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 -#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 -#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 -#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 -#define E1000_CTRL_EXT_CANC 0x04000000 /* Int delay cancellation */ +#define E1000_CTRL_EXT_LINK_MODE_82580_MASK 0x01C00000 /*82580 bit 24:22*/ +#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000 +#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_TBI 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_KMRN 0x00000000 +#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000 +#define E1000_CTRL_EXT_LINK_MODE_PCIX_SERDES 0x00800000 +#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000 +#define E1000_CTRL_EXT_EIAME 0x01000000 +#define E1000_CTRL_EXT_IRCA 0x00000001 +#define E1000_CTRL_EXT_WR_WMARK_MASK 0x03000000 +#define E1000_CTRL_EXT_WR_WMARK_256 0x00000000 +#define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 +#define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 +#define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_CANC 0x04000000 /* Int delay cancellation */ #define E1000_CTRL_EXT_DRV_LOAD 0x10000000 /* Drv loaded bit for FW */ /* IAME enable bit (27) was removed in >= 82575 */ #define E1000_CTRL_EXT_IAME 0x08000000 /* Int ACK Auto-mask */ @@ -201,66 +201,66 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_CRTL_EXT_PB_PAREN 0x01000000 /* descriptor FIFO parity error detection enable */ #define E1000_CTRL_EXT_DF_PAREN 0x02000000 -#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 -#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ +#define E1000_CTRL_EXT_GHOST_PAREN 0x40000000 +#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */ #define E1000_CTRL_EXT_LSECCK 0x00001000 #define E1000_CTRL_EXT_PHYPDEN 0x00100000 -#define E1000_I2CCMD_REG_ADDR_SHIFT 16 -#define E1000_I2CCMD_REG_ADDR 0x00FF0000 -#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 -#define E1000_I2CCMD_PHY_ADDR 0x07000000 -#define E1000_I2CCMD_OPCODE_READ 0x08000000 -#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 -#define E1000_I2CCMD_RESET 0x10000000 -#define E1000_I2CCMD_READY 0x20000000 -#define E1000_I2CCMD_INTERRUPT_ENA 0x40000000 -#define E1000_I2CCMD_ERROR 0x80000000 +#define E1000_I2CCMD_REG_ADDR_SHIFT 16 +#define E1000_I2CCMD_REG_ADDR 0x00FF0000 +#define E1000_I2CCMD_PHY_ADDR_SHIFT 24 +#define E1000_I2CCMD_PHY_ADDR 0x07000000 +#define E1000_I2CCMD_OPCODE_READ 0x08000000 +#define E1000_I2CCMD_OPCODE_WRITE 0x00000000 +#define E1000_I2CCMD_RESET 0x10000000 +#define E1000_I2CCMD_READY 0x20000000 +#define E1000_I2CCMD_INTERRUPT_ENA 0x40000000 +#define E1000_I2CCMD_ERROR 0x80000000 #define E1000_I2CCMD_SFP_DATA_ADDR(a) (0x0000 + (a)) #define E1000_I2CCMD_SFP_DIAG_ADDR(a) (0x0100 + (a)) -#define E1000_MAX_SGMII_PHY_REG_ADDR 255 -#define E1000_I2CCMD_PHY_TIMEOUT 200 -#define E1000_IVAR_VALID 0x80 -#define E1000_GPIE_NSICR 0x00000001 -#define E1000_GPIE_MSIX_MODE 0x00000010 -#define E1000_GPIE_EIAME 0x40000000 -#define E1000_GPIE_PBA 0x80000000 +#define E1000_MAX_SGMII_PHY_REG_ADDR 255 +#define E1000_I2CCMD_PHY_TIMEOUT 200 +#define E1000_IVAR_VALID 0x80 +#define E1000_GPIE_NSICR 0x00000001 +#define E1000_GPIE_MSIX_MODE 0x00000010 +#define E1000_GPIE_EIAME 0x40000000 +#define E1000_GPIE_PBA 0x80000000 /* Receive Descriptor bit definitions */ -#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ -#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ -#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ -#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ -#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ -#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ -#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ -#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ -#define E1000_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ -#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ -#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ -#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ -#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ -#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ -#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ -#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ -#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ -#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ -#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ -#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ -#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ -#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define E1000_RXD_SPC_PRI_SHIFT 13 -#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ -#define E1000_RXD_SPC_CFI_SHIFT 12 +#define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ +#define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ +#define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ +#define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define E1000_RXD_ERR_CE 0x01 /* CRC Error */ +#define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ +#define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ +#define E1000_RXD_ERR_CXE 0x10 /* Carrier Extension Error */ +#define E1000_RXD_ERR_TCPE 0x20 /* TCP/UDP Checksum Error */ +#define E1000_RXD_ERR_IPE 0x40 /* IP Checksum Error */ +#define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ +#define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +#define E1000_RXD_SPC_PRI_SHIFT 13 +#define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_SHIFT 12 #define E1000_RXDEXT_STATERR_TST 0x00000100 /* Time Stamp taken */ -#define E1000_RXDEXT_STATERR_LB 0x00040000 -#define E1000_RXDEXT_STATERR_CE 0x01000000 -#define E1000_RXDEXT_STATERR_SE 0x02000000 -#define E1000_RXDEXT_STATERR_SEQ 0x04000000 -#define E1000_RXDEXT_STATERR_CXE 0x10000000 -#define E1000_RXDEXT_STATERR_TCPE 0x20000000 -#define E1000_RXDEXT_STATERR_IPE 0x40000000 -#define E1000_RXDEXT_STATERR_RXE 0x80000000 +#define E1000_RXDEXT_STATERR_LB 0x00040000 +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 #define E1000_RXDEXT_LSECH 0x01000000 #define E1000_RXDEXT_LSECE_MASK 0x60000000 @@ -271,180 +271,180 @@ POSSIBILITY OF SUCH DAMAGE. /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ - E1000_RXD_ERR_CE | \ - E1000_RXD_ERR_SE | \ - E1000_RXD_ERR_SEQ | \ - E1000_RXD_ERR_CXE | \ - E1000_RXD_ERR_RXE) + E1000_RXD_ERR_CE | \ + E1000_RXD_ERR_SE | \ + E1000_RXD_ERR_SEQ | \ + E1000_RXD_ERR_CXE | \ + E1000_RXD_ERR_RXE) /* Same mask, but for extended and packet split descriptors */ #define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ - E1000_RXDEXT_STATERR_CE | \ - E1000_RXDEXT_STATERR_SE | \ - E1000_RXDEXT_STATERR_SEQ | \ - E1000_RXDEXT_STATERR_CXE | \ - E1000_RXDEXT_STATERR_RXE) + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) /* Packet Types as indicated in the Adv/Ext receive descriptor. */ #define E1000_RXD_PKTTYPE_MASK 0x000F0000 #define E1000_RXD_PKTTYPE_PTP 0x000E0000 -#define E1000_MRQC_ENABLE_MASK 0x00000007 -#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 -#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 -#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 -#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 -#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 -#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 -#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 -#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 +#define E1000_MRQC_ENABLE_MASK 0x00000007 +#define E1000_MRQC_ENABLE_RSS_2Q 0x00000001 +#define E1000_MRQC_ENABLE_RSS_INT 0x00000004 +#define E1000_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define E1000_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define E1000_MRQC_RSS_FIELD_IPV4 0x00020000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP_EX 0x00040000 +#define E1000_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define E1000_MRQC_RSS_FIELD_IPV6 0x00100000 +#define E1000_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 -#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 -#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF /* Management Control */ -#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ -#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ -#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ -#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ -#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ -#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ -#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ -#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ -#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ +#define E1000_MANC_SMBUS_EN 0x00000001 /* SMBus Enabled - RO */ +#define E1000_MANC_ASF_EN 0x00000002 /* ASF Enabled - RO */ +#define E1000_MANC_R_ON_FORCE 0x00000004 /* Reset on Force TCO - RO */ +#define E1000_MANC_RMCP_EN 0x00000100 /* Enable RCMP 026Fh Filtering */ +#define E1000_MANC_0298_EN 0x00000200 /* Enable RCMP 0298h Filtering */ +#define E1000_MANC_IPV4_EN 0x00000400 /* Enable IPv4 */ +#define E1000_MANC_IPV6_EN 0x00000800 /* Enable IPv6 */ +#define E1000_MANC_SNAP_EN 0x00001000 /* Accept LLC/SNAP */ +#define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ /* Enable Neighbor Discovery Filtering */ -#define E1000_MANC_NEIGHBOR_EN 0x00004000 -#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ -#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ -#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ +#define E1000_MANC_NEIGHBOR_EN 0x00004000 +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ +#define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ +#define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ -#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ -#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ +#define E1000_MANC_RCV_ALL 0x00080000 /* Receive All Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ /* Enable MAC address filtering */ -#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 +#define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MNG packets to host memory */ -#define E1000_MANC_EN_MNG2HOST 0x00200000 +#define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable IP address filtering */ -#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 #define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Ena checksum filtering */ #define E1000_MANC_BR_EN 0x01000000 /* Ena broadcast filtering */ -#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ -#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ -#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ -#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ -#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ -#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ -#define E1000_MANC_MPROXYE 0x40000000 /* Mngment Proxy Enable */ +#define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ +#define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ +#define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ +#define E1000_MANC_SMB_DATA_IN 0x08000000 /* SMBus Data In */ +#define E1000_MANC_SMB_DATA_OUT 0x10000000 /* SMBus Data Out */ +#define E1000_MANC_SMB_CLK_OUT 0x20000000 /* SMBus Clock Out */ +#define E1000_MANC_MPROXYE 0x40000000 /* Mngment Proxy Enable */ #define E1000_MANC_EN_BMC2OS 0x10000000 /* OS2BMC is enabld or not */ -#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ -#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +#define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ +#define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ -#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ -#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ -#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ -#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ +#define E1000_MANC2H_PORT_623 0x00000020 /* Port 0x26f */ +#define E1000_MANC2H_PORT_664 0x00000040 /* Port 0x298 */ +#define E1000_MDEF_PORT_623 0x00000800 /* Port 0x26f */ +#define E1000_MDEF_PORT_664 0x00000400 /* Port 0x298 */ /* Receive Control */ -#define E1000_RCTL_RST 0x00000001 /* Software reset */ -#define E1000_RCTL_EN 0x00000002 /* enable */ -#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ -#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ -#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ -#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ -#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ -#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ -#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ -#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ -#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ -#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ -#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ -#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* Rx desc min thresh size */ -#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* Rx desc min thresh size */ -#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ -#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ -#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ -#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ -#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ -#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ -#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ +#define E1000_RCTL_RST 0x00000001 /* Software reset */ +#define E1000_RCTL_EN 0x00000002 /* enable */ +#define E1000_RCTL_SBP 0x00000004 /* store bad packet */ +#define E1000_RCTL_UPE 0x00000008 /* unicast promisc enable */ +#define E1000_RCTL_MPE 0x00000010 /* multicast promisc enable */ +#define E1000_RCTL_LPE 0x00000020 /* long packet enable */ +#define E1000_RCTL_LBM_NO 0x00000000 /* no loopback mode */ +#define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ +#define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ +#define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ +#define E1000_RCTL_RDMTS_HALF 0x00000000 /* Rx desc min thresh size */ +#define E1000_RCTL_RDMTS_QUAT 0x00000100 /* Rx desc min thresh size */ +#define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* Rx desc min thresh size */ +#define E1000_RCTL_MO_SHIFT 12 /* multicast offset shift */ +#define E1000_RCTL_MO_0 0x00000000 /* multicast offset 11:0 */ +#define E1000_RCTL_MO_1 0x00001000 /* multicast offset 12:1 */ +#define E1000_RCTL_MO_2 0x00002000 /* multicast offset 13:2 */ +#define E1000_RCTL_MO_3 0x00003000 /* multicast offset 15:4 */ +#define E1000_RCTL_MDR 0x00004000 /* multicast desc ring 0 */ +#define E1000_RCTL_BAM 0x00008000 /* broadcast enable */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 0 */ -#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ -#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ -#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ -#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ +#define E1000_RCTL_SZ_2048 0x00000000 /* Rx buffer size 2048 */ +#define E1000_RCTL_SZ_1024 0x00010000 /* Rx buffer size 1024 */ +#define E1000_RCTL_SZ_512 0x00020000 /* Rx buffer size 512 */ +#define E1000_RCTL_SZ_256 0x00030000 /* Rx buffer size 256 */ /* these buffer sizes are valid if E1000_RCTL_BSEX is 1 */ -#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ -#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ -#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ -#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ -#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ -#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ -#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ -#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ -#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ -#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ -#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ -#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ +#define E1000_RCTL_SZ_16384 0x00010000 /* Rx buffer size 16384 */ +#define E1000_RCTL_SZ_8192 0x00020000 /* Rx buffer size 8192 */ +#define E1000_RCTL_SZ_4096 0x00030000 /* Rx buffer size 4096 */ +#define E1000_RCTL_VFE 0x00040000 /* vlan filter enable */ +#define E1000_RCTL_CFIEN 0x00080000 /* canonical form enable */ +#define E1000_RCTL_CFI 0x00100000 /* canonical form indicator */ +#define E1000_RCTL_DPF 0x00400000 /* discard pause frames */ +#define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ +#define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ +#define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ /* * Use byte values for the following shift parameters * Usage: * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & - * E1000_PSRCTL_BSIZE0_MASK) | - * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & - * E1000_PSRCTL_BSIZE1_MASK) | - * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & - * E1000_PSRCTL_BSIZE2_MASK) | - * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; - * E1000_PSRCTL_BSIZE3_MASK)) + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) * where value0 = [128..16256], default=256 * value1 = [1024..64512], default=4096 * value2 = [0..64512], default=4096 * value3 = [0..64512], default=0 */ -#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F -#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 -#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 -#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 -#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ -#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ -#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ -#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* SWFW_SYNC Definitions */ -#define E1000_SWFW_EEP_SM 0x01 -#define E1000_SWFW_PHY0_SM 0x02 -#define E1000_SWFW_PHY1_SM 0x04 -#define E1000_SWFW_CSR_SM 0x08 -#define E1000_SWFW_PHY2_SM 0x20 -#define E1000_SWFW_PHY3_SM 0x40 -#define E1000_SWFW_SW_MNG_SM 0x400 +#define E1000_SWFW_EEP_SM 0x01 +#define E1000_SWFW_PHY0_SM 0x02 +#define E1000_SWFW_PHY1_SM 0x04 +#define E1000_SWFW_CSR_SM 0x08 +#define E1000_SWFW_PHY2_SM 0x20 +#define E1000_SWFW_PHY3_SM 0x40 +#define E1000_SWFW_SW_MNG_SM 0x400 /* FACTPS Definitions */ -#define E1000_FACTPS_LFS 0x40000000 /* LAN Function Select */ +#define E1000_FACTPS_LFS 0x40000000 /* LAN Function Select */ /* Device Control */ -#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ -#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ -#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ +#define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ +#define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ #define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master reqs */ -#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ -#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ -#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ -#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ -#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ -#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ -#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ -#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ -#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ -#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ -#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ -#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ -#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ -#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ +#define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ +#define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ +#define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ +#define E1000_CTRL_ASDE 0x00000020 /* Auto-speed detect enable */ +#define E1000_CTRL_SLU 0x00000040 /* Set link up (Force Link) */ +#define E1000_CTRL_ILOS 0x00000080 /* Invert Loss-Of Signal */ +#define E1000_CTRL_SPD_SEL 0x00000300 /* Speed Select Mask */ +#define E1000_CTRL_SPD_10 0x00000000 /* Force 10Mb */ +#define E1000_CTRL_SPD_100 0x00000100 /* Force 100Mb */ +#define E1000_CTRL_SPD_1000 0x00000200 /* Force 1Gb */ +#define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ +#define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ +#define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_EN 0x00002000 /* Dock/Undock enable */ /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Reset both PHY ports, through PHYRST_N pin */ @@ -453,103 +453,103 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_CTRL_EXT_LINK_EN 0x00010000 #define E1000_CTRL_LANPHYPC_OVERRIDE 0x00010000 /* SW control of LANPHYPC */ #define E1000_CTRL_LANPHYPC_VALUE 0x00020000 /* SW value of LANPHYPC */ -#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ -#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ -#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ -#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ -#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ -#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ -#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ -#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ -#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ -#define E1000_CTRL_RST 0x04000000 /* Global reset */ -#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ -#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ -#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ -#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ -#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ -#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to ME */ -#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ +#define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ +#define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_SWDPIN3 0x00200000 /* SWDPIN 3 value */ +#define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ +#define E1000_CTRL_SWDPIO1 0x00800000 /* SWDPIN 1 input or output */ +#define E1000_CTRL_SWDPIO2 0x01000000 /* SWDPIN 2 input or output */ +#define E1000_CTRL_SWDPIO3 0x02000000 /* SWDPIN 3 input or output */ +#define E1000_CTRL_RST 0x04000000 /* Global reset */ +#define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ +#define E1000_CTRL_TFCE 0x10000000 /* Transmit flow control enable */ +#define E1000_CTRL_RTE 0x20000000 /* Routing tag enable */ +#define E1000_CTRL_VME 0x40000000 /* IEEE VLAN mode enable */ +#define E1000_CTRL_PHY_RST 0x80000000 /* PHY Reset */ +#define E1000_CTRL_SW2FW_INT 0x02000000 /* Initiate an interrupt to ME */ +#define E1000_CTRL_I2C_ENA 0x02000000 /* I2C enable */ /* * Bit definitions for the Management Data IO (MDIO) and Management Data * Clock (MDC) pins in the Device Control Register. */ -#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0 -#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0 -#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2 -#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2 -#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3 -#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3 -#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR -#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA - -#define E1000_CONNSW_ENRGSRC 0x4 -#define E1000_PCS_CFG_PCS_EN 8 -#define E1000_PCS_LCTL_FLV_LINK_UP 1 -#define E1000_PCS_LCTL_FSV_10 0 -#define E1000_PCS_LCTL_FSV_100 2 -#define E1000_PCS_LCTL_FSV_1000 4 -#define E1000_PCS_LCTL_FDV_FULL 8 -#define E1000_PCS_LCTL_FSD 0x10 -#define E1000_PCS_LCTL_FORCE_LINK 0x20 -#define E1000_PCS_LCTL_LOW_LINK_LATCH 0x40 -#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 -#define E1000_PCS_LCTL_AN_ENABLE 0x10000 -#define E1000_PCS_LCTL_AN_RESTART 0x20000 -#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 -#define E1000_PCS_LCTL_AN_SGMII_BYPASS 0x80000 -#define E1000_PCS_LCTL_AN_SGMII_TRIGGER 0x100000 -#define E1000_PCS_LCTL_FAST_LINK_TIMER 0x1000000 -#define E1000_PCS_LCTL_LINK_OK_FIX 0x2000000 -#define E1000_PCS_LCTL_CRS_ON_NI 0x4000000 -#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 - -#define E1000_PCS_LSTS_LINK_OK 1 -#define E1000_PCS_LSTS_SPEED_10 0 -#define E1000_PCS_LSTS_SPEED_100 2 -#define E1000_PCS_LSTS_SPEED_1000 4 -#define E1000_PCS_LSTS_DUPLEX_FULL 8 -#define E1000_PCS_LSTS_SYNK_OK 0x10 -#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 -#define E1000_PCS_LSTS_AN_PAGE_RX 0x20000 -#define E1000_PCS_LSTS_AN_TIMED_OUT 0x40000 -#define E1000_PCS_LSTS_AN_REMOTE_FAULT 0x80000 -#define E1000_PCS_LSTS_AN_ERROR_RWS 0x100000 +#define E1000_CTRL_PHY_RESET_DIR E1000_CTRL_SWDPIO0 +#define E1000_CTRL_PHY_RESET E1000_CTRL_SWDPIN0 +#define E1000_CTRL_MDIO_DIR E1000_CTRL_SWDPIO2 +#define E1000_CTRL_MDIO E1000_CTRL_SWDPIN2 +#define E1000_CTRL_MDC_DIR E1000_CTRL_SWDPIO3 +#define E1000_CTRL_MDC E1000_CTRL_SWDPIN3 +#define E1000_CTRL_PHY_RESET_DIR4 E1000_CTRL_EXT_SDP4_DIR +#define E1000_CTRL_PHY_RESET4 E1000_CTRL_EXT_SDP4_DATA + +#define E1000_CONNSW_ENRGSRC 0x4 +#define E1000_PCS_CFG_PCS_EN 8 +#define E1000_PCS_LCTL_FLV_LINK_UP 1 +#define E1000_PCS_LCTL_FSV_10 0 +#define E1000_PCS_LCTL_FSV_100 2 +#define E1000_PCS_LCTL_FSV_1000 4 +#define E1000_PCS_LCTL_FDV_FULL 8 +#define E1000_PCS_LCTL_FSD 0x10 +#define E1000_PCS_LCTL_FORCE_LINK 0x20 +#define E1000_PCS_LCTL_LOW_LINK_LATCH 0x40 +#define E1000_PCS_LCTL_FORCE_FCTRL 0x80 +#define E1000_PCS_LCTL_AN_ENABLE 0x10000 +#define E1000_PCS_LCTL_AN_RESTART 0x20000 +#define E1000_PCS_LCTL_AN_TIMEOUT 0x40000 +#define E1000_PCS_LCTL_AN_SGMII_BYPASS 0x80000 +#define E1000_PCS_LCTL_AN_SGMII_TRIGGER 0x100000 +#define E1000_PCS_LCTL_FAST_LINK_TIMER 0x1000000 +#define E1000_PCS_LCTL_LINK_OK_FIX 0x2000000 +#define E1000_PCS_LCTL_CRS_ON_NI 0x4000000 +#define E1000_ENABLE_SERDES_LOOPBACK 0x0410 + +#define E1000_PCS_LSTS_LINK_OK 1 +#define E1000_PCS_LSTS_SPEED_10 0 +#define E1000_PCS_LSTS_SPEED_100 2 +#define E1000_PCS_LSTS_SPEED_1000 4 +#define E1000_PCS_LSTS_DUPLEX_FULL 8 +#define E1000_PCS_LSTS_SYNK_OK 0x10 +#define E1000_PCS_LSTS_AN_COMPLETE 0x10000 +#define E1000_PCS_LSTS_AN_PAGE_RX 0x20000 +#define E1000_PCS_LSTS_AN_TIMED_OUT 0x40000 +#define E1000_PCS_LSTS_AN_REMOTE_FAULT 0x80000 +#define E1000_PCS_LSTS_AN_ERROR_RWS 0x100000 /* Device Status */ #define E1000_STATUS_FD 0x00000001 /* Duplex 0=half 1=full */ -#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ -#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ -#define E1000_STATUS_FUNC_SHIFT 2 -#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ -#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ -#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ -#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ -#define E1000_STATUS_SPEED_MASK 0x000000C0 -#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ -#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ -#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ +#define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ +#define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 +#define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ +#define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ +#define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ +#define E1000_STATUS_TBIMODE 0x00000020 /* TBI mode */ +#define E1000_STATUS_SPEED_MASK 0x000000C0 +#define E1000_STATUS_SPEED_10 0x00000000 /* Speed 10Mb/s */ +#define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ +#define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define E1000_STATUS_LAN_INIT_DONE 0x00000200 /* Lan Init Compltn by NVM */ -#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ -#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ +#define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_PHYRA 0x00000400 /* PHY Reset Asserted */ /* Change in Dock/Undock state clear on write '0'. */ #define E1000_STATUS_DOCK_CI 0x00000800 -#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ -#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ -#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ -#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ -#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ -#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Master request status */ +#define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ +#define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ +#define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ +#define E1000_STATUS_PCIX_MODE 0x00002000 /* PCI-X mode */ +#define E1000_STATUS_PCIX_SPEED 0x0000C000 /* PCI-X bus speed */ #define E1000_STATUS_BMC_SKU_0 0x00100000 /* BMC USB redirect disbld */ -#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ -#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ -#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ +#define E1000_STATUS_BMC_SKU_1 0x00200000 /* BMC SRAM disabled */ +#define E1000_STATUS_BMC_SKU_2 0x00400000 /* BMC SDRAM disabled */ +#define E1000_STATUS_BMC_CRYPTO 0x00800000 /* BMC crypto disabled */ /* BMC external code execution disabled */ #define E1000_STATUS_BMC_LITE 0x01000000 -#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ -#define E1000_STATUS_FUSE_8 0x04000000 -#define E1000_STATUS_FUSE_9 0x08000000 +#define E1000_STATUS_RGMII_ENABLE 0x02000000 /* RGMII disabled */ +#define E1000_STATUS_FUSE_8 0x04000000 +#define E1000_STATUS_FUSE_9 0x08000000 #define E1000_STATUS_SERDES0_DIS 0x10000000 /* SERDES disbld on port 0 */ #define E1000_STATUS_SERDES1_DIS 0x20000000 /* SERDES disbld on port 1 */ @@ -558,20 +558,20 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_STATUS_PCIX_SPEED_100 0x00004000 /* PCI-X bus spd 66-100MHz */ #define E1000_STATUS_PCIX_SPEED_133 0x00008000 /* PCI-X bus spd 100-133MHz*/ -#define SPEED_10 10 -#define SPEED_100 100 -#define SPEED_1000 1000 -#define HALF_DUPLEX 1 -#define FULL_DUPLEX 2 +#define SPEED_10 10 +#define SPEED_100 100 +#define SPEED_1000 1000 +#define HALF_DUPLEX 1 +#define FULL_DUPLEX 2 -#define PHY_FORCE_TIME 20 +#define PHY_FORCE_TIME 20 -#define ADVERTISE_10_HALF 0x0001 -#define ADVERTISE_10_FULL 0x0002 -#define ADVERTISE_100_HALF 0x0004 -#define ADVERTISE_100_FULL 0x0008 -#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ -#define ADVERTISE_1000_FULL 0x0020 +#define ADVERTISE_10_HALF 0x0001 +#define ADVERTISE_10_FULL 0x0002 +#define ADVERTISE_100_HALF 0x0004 +#define ADVERTISE_100_FULL 0x0008 +#define ADVERTISE_1000_HALF 0x0010 /* Not used, just FYI */ +#define ADVERTISE_1000_FULL 0x0020 /* 1000/H is not supported, nor spec-compliant. */ #define E1000_ALL_SPEED_DUPLEX ( \ @@ -580,13 +580,13 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_ALL_NOT_GIG ( \ ADVERTISE_10_HALF | ADVERTISE_10_FULL | ADVERTISE_100_HALF | \ ADVERTISE_100_FULL) -#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) -#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) +#define E1000_ALL_100_SPEED (ADVERTISE_100_HALF | ADVERTISE_100_FULL) +#define E1000_ALL_10_SPEED (ADVERTISE_10_HALF | ADVERTISE_10_FULL) #define E1000_ALL_FULL_DUPLEX ( \ ADVERTISE_10_FULL | ADVERTISE_100_FULL | ADVERTISE_1000_FULL) -#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) +#define E1000_ALL_HALF_DUPLEX (ADVERTISE_10_HALF | ADVERTISE_100_HALF) -#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX +#define AUTONEG_ADVERTISE_SPEED_DEFAULT E1000_ALL_SPEED_DUPLEX /* LED Control */ #define E1000_PHY_LED0_MODE_MASK 0x00000007 @@ -594,164 +594,164 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_PHY_LED0_BLINK 0x00000010 #define E1000_PHY_LED0_MASK 0x0000001F -#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F -#define E1000_LEDCTL_LED0_MODE_SHIFT 0 -#define E1000_LEDCTL_LED0_BLINK_RATE 0x00000020 -#define E1000_LEDCTL_LED0_IVRT 0x00000040 -#define E1000_LEDCTL_LED0_BLINK 0x00000080 -#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 -#define E1000_LEDCTL_LED1_MODE_SHIFT 8 -#define E1000_LEDCTL_LED1_BLINK_RATE 0x00002000 -#define E1000_LEDCTL_LED1_IVRT 0x00004000 -#define E1000_LEDCTL_LED1_BLINK 0x00008000 -#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 -#define E1000_LEDCTL_LED2_MODE_SHIFT 16 -#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 -#define E1000_LEDCTL_LED2_IVRT 0x00400000 -#define E1000_LEDCTL_LED2_BLINK 0x00800000 -#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 -#define E1000_LEDCTL_LED3_MODE_SHIFT 24 -#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 -#define E1000_LEDCTL_LED3_IVRT 0x40000000 -#define E1000_LEDCTL_LED3_BLINK 0x80000000 - -#define E1000_LEDCTL_MODE_LINK_10_1000 0x0 -#define E1000_LEDCTL_MODE_LINK_100_1000 0x1 -#define E1000_LEDCTL_MODE_LINK_UP 0x2 -#define E1000_LEDCTL_MODE_ACTIVITY 0x3 -#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4 -#define E1000_LEDCTL_MODE_LINK_10 0x5 -#define E1000_LEDCTL_MODE_LINK_100 0x6 -#define E1000_LEDCTL_MODE_LINK_1000 0x7 -#define E1000_LEDCTL_MODE_PCIX_MODE 0x8 -#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9 -#define E1000_LEDCTL_MODE_COLLISION 0xA -#define E1000_LEDCTL_MODE_BUS_SPEED 0xB -#define E1000_LEDCTL_MODE_BUS_SIZE 0xC -#define E1000_LEDCTL_MODE_PAUSED 0xD -#define E1000_LEDCTL_MODE_LED_ON 0xE -#define E1000_LEDCTL_MODE_LED_OFF 0xF +#define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F +#define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_BLINK_RATE 0x00000020 +#define E1000_LEDCTL_LED0_IVRT 0x00000040 +#define E1000_LEDCTL_LED0_BLINK 0x00000080 +#define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 +#define E1000_LEDCTL_LED1_MODE_SHIFT 8 +#define E1000_LEDCTL_LED1_BLINK_RATE 0x00002000 +#define E1000_LEDCTL_LED1_IVRT 0x00004000 +#define E1000_LEDCTL_LED1_BLINK 0x00008000 +#define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 +#define E1000_LEDCTL_LED2_MODE_SHIFT 16 +#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 +#define E1000_LEDCTL_LED2_IVRT 0x00400000 +#define E1000_LEDCTL_LED2_BLINK 0x00800000 +#define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 +#define E1000_LEDCTL_LED3_MODE_SHIFT 24 +#define E1000_LEDCTL_LED3_BLINK_RATE 0x20000000 +#define E1000_LEDCTL_LED3_IVRT 0x40000000 +#define E1000_LEDCTL_LED3_BLINK 0x80000000 + +#define E1000_LEDCTL_MODE_LINK_10_1000 0x0 +#define E1000_LEDCTL_MODE_LINK_100_1000 0x1 +#define E1000_LEDCTL_MODE_LINK_UP 0x2 +#define E1000_LEDCTL_MODE_ACTIVITY 0x3 +#define E1000_LEDCTL_MODE_LINK_ACTIVITY 0x4 +#define E1000_LEDCTL_MODE_LINK_10 0x5 +#define E1000_LEDCTL_MODE_LINK_100 0x6 +#define E1000_LEDCTL_MODE_LINK_1000 0x7 +#define E1000_LEDCTL_MODE_PCIX_MODE 0x8 +#define E1000_LEDCTL_MODE_FULL_DUPLEX 0x9 +#define E1000_LEDCTL_MODE_COLLISION 0xA +#define E1000_LEDCTL_MODE_BUS_SPEED 0xB +#define E1000_LEDCTL_MODE_BUS_SIZE 0xC +#define E1000_LEDCTL_MODE_PAUSED 0xD +#define E1000_LEDCTL_MODE_LED_ON 0xE +#define E1000_LEDCTL_MODE_LED_OFF 0xF /* Transmit Descriptor bit definitions */ -#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ -#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ -#define E1000_TXD_POPTS_SHIFT 8 /* POPTS shift */ -#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ -#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ -#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ -#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ -#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ -#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ +#define E1000_TXD_DTYP_D 0x00100000 /* Data Descriptor */ +#define E1000_TXD_DTYP_C 0x00000000 /* Context Descriptor */ +#define E1000_TXD_POPTS_SHIFT 8 /* POPTS shift */ +#define E1000_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define E1000_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define E1000_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define E1000_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define E1000_TXD_CMD_RS 0x08000000 /* Report Status */ +#define E1000_TXD_CMD_RPS 0x10000000 /* Report Packet Sent */ #define E1000_TXD_CMD_DEXT 0x20000000 /* Desc extension (0 = legacy) */ -#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ -#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ -#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ -#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ -#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ -#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ -#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ -#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ -#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ -#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ +#define E1000_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define E1000_TXD_CMD_IDE 0x80000000 /* Enable Tidv register */ +#define E1000_TXD_STAT_DD 0x00000001 /* Descriptor Done */ +#define E1000_TXD_STAT_EC 0x00000002 /* Excess Collisions */ +#define E1000_TXD_STAT_LC 0x00000004 /* Late Collisions */ +#define E1000_TXD_STAT_TU 0x00000008 /* Transmit underrun */ +#define E1000_TXD_CMD_TCP 0x01000000 /* TCP packet */ +#define E1000_TXD_CMD_IP 0x02000000 /* IP packet */ +#define E1000_TXD_CMD_TSE 0x04000000 /* TCP Seg enable */ +#define E1000_TXD_STAT_TC 0x00000004 /* Tx Underrun */ /* Extended desc bits for Linksec and timesync */ #define E1000_TXD_CMD_LINKSEC 0x10000000 /* Apply LinkSec on packet */ #define E1000_TXD_EXTCMD_TSTAMP 0x00000010 /* IEEE1588 Timestamp packet */ /* Transmit Control */ -#define E1000_TCTL_RST 0x00000001 /* software reset */ -#define E1000_TCTL_EN 0x00000002 /* enable Tx */ -#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ -#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ -#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ -#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ -#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ -#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ -#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ -#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ -#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ +#define E1000_TCTL_RST 0x00000001 /* software reset */ +#define E1000_TCTL_EN 0x00000002 /* enable Tx */ +#define E1000_TCTL_BCE 0x00000004 /* busy check enable */ +#define E1000_TCTL_PSP 0x00000008 /* pad short packets */ +#define E1000_TCTL_CT 0x00000ff0 /* collision threshold */ +#define E1000_TCTL_COLD 0x003ff000 /* collision distance */ +#define E1000_TCTL_SWXOFF 0x00400000 /* SW Xoff transmission */ +#define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ +#define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ +#define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Transmit Arbitration Count */ -#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ +#define E1000_TARC0_ENABLE 0x00000400 /* Enable Tx Queue 0 */ /* SerDes Control */ -#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 +#define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 /* Receive Checksum Control */ -#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ -#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ -#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ -#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ -#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ -#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ -#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ +#define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ +#define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ +#define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ +#define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_CRCOFL 0x00000800 /* CRC32 offload enable */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ /* Header split receive */ -#define E1000_RFCTL_ISCSI_DIS 0x00000001 -#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E -#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 -#define E1000_RFCTL_NFSW_DIS 0x00000040 -#define E1000_RFCTL_NFSR_DIS 0x00000080 -#define E1000_RFCTL_NFS_VER_MASK 0x00000300 -#define E1000_RFCTL_NFS_VER_SHIFT 8 -#define E1000_RFCTL_IPV6_DIS 0x00000400 -#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 -#define E1000_RFCTL_ACK_DIS 0x00001000 -#define E1000_RFCTL_ACKD_DIS 0x00002000 -#define E1000_RFCTL_IPFRSP_DIS 0x00004000 -#define E1000_RFCTL_EXTEN 0x00008000 -#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 -#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 -#define E1000_RFCTL_LEF 0x00040000 +#define E1000_RFCTL_ISCSI_DIS 0x00000001 +#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_NFS_VER_MASK 0x00000300 +#define E1000_RFCTL_NFS_VER_SHIFT 8 +#define E1000_RFCTL_IPV6_DIS 0x00000400 +#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_ACKD_DIS 0x00002000 +#define E1000_RFCTL_IPFRSP_DIS 0x00004000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 +#define E1000_RFCTL_LEF 0x00040000 /* Collision related configuration parameters */ -#define E1000_COLLISION_THRESHOLD 15 -#define E1000_CT_SHIFT 4 -#define E1000_COLLISION_DISTANCE 63 -#define E1000_COLD_SHIFT 12 +#define E1000_COLLISION_THRESHOLD 15 +#define E1000_CT_SHIFT 4 +#define E1000_COLLISION_DISTANCE 63 +#define E1000_COLD_SHIFT 12 /* Default values for the transmit IPG register */ #define DEFAULT_82542_TIPG_IPGT 10 -#define DEFAULT_82543_TIPG_IPGT_FIBER 9 -#define DEFAULT_82543_TIPG_IPGT_COPPER 8 +#define DEFAULT_82543_TIPG_IPGT_FIBER 9 +#define DEFAULT_82543_TIPG_IPGT_COPPER 8 -#define E1000_TIPG_IPGT_MASK 0x000003FF -#define E1000_TIPG_IPGR1_MASK 0x000FFC00 -#define E1000_TIPG_IPGR2_MASK 0x3FF00000 +#define E1000_TIPG_IPGT_MASK 0x000003FF +#define E1000_TIPG_IPGR1_MASK 0x000FFC00 +#define E1000_TIPG_IPGR2_MASK 0x3FF00000 #define DEFAULT_82542_TIPG_IPGR1 2 -#define DEFAULT_82543_TIPG_IPGR1 8 -#define E1000_TIPG_IPGR1_SHIFT 10 +#define DEFAULT_82543_TIPG_IPGR1 8 +#define E1000_TIPG_IPGR1_SHIFT 10 #define DEFAULT_82542_TIPG_IPGR2 10 -#define DEFAULT_82543_TIPG_IPGR2 6 -#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 -#define E1000_TIPG_IPGR2_SHIFT 20 +#define DEFAULT_82543_TIPG_IPGR2 6 +#define DEFAULT_80003ES2LAN_TIPG_IPGR2 7 +#define E1000_TIPG_IPGR2_SHIFT 20 /* Ethertype field values */ -#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ +#define ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.3ac packet */ -#define ETHERNET_FCS_SIZE 4 -#define MAX_JUMBO_FRAME_SIZE 0x3F00 +#define ETHERNET_FCS_SIZE 4 +#define MAX_JUMBO_FRAME_SIZE 0x3F00 /* Extended Configuration Control and Size */ -#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 -#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 -#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 -#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 -#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 -#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 -#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 -#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 - -#define E1000_PHY_CTRL_SPD_EN 0x00000001 -#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 -#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 -#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 -#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 - -#define E1000_KABGTXD_BGSQLBIAS 0x00050000 +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_LCD_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE 0x00000008 +#define E1000_EXTCNF_CTRL_SWFLAG 0x00000020 +#define E1000_EXTCNF_CTRL_GATE_PHY_CFG 0x00000080 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_MASK 0x00FF0000 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH_SHIFT 16 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK 0x0FFF0000 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT 16 + +#define E1000_PHY_CTRL_SPD_EN 0x00000001 +#define E1000_PHY_CTRL_D0A_LPLU 0x00000002 +#define E1000_PHY_CTRL_NOND0A_LPLU 0x00000004 +#define E1000_PHY_CTRL_NOND0A_GBE_DISABLE 0x00000008 +#define E1000_PHY_CTRL_GBE_DISABLE 0x00000040 + +#define E1000_KABGTXD_BGSQLBIAS 0x00050000 /* Low Power IDLE Control */ #define E1000_LPIC_1000ENABLE 0x00010000 @@ -759,91 +759,91 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_LPIC_LPIET_SHIFT 24 /* Low Power Idle Entry Time */ /* PBA constants */ -#define E1000_PBA_6K 0x0006 /* 6KB */ -#define E1000_PBA_8K 0x0008 /* 8KB */ -#define E1000_PBA_10K 0x000A /* 10KB */ -#define E1000_PBA_12K 0x000C /* 12KB */ -#define E1000_PBA_14K 0x000E /* 14KB */ -#define E1000_PBA_16K 0x0010 /* 16KB */ -#define E1000_PBA_18K 0x0012 -#define E1000_PBA_20K 0x0014 -#define E1000_PBA_22K 0x0016 -#define E1000_PBA_24K 0x0018 -#define E1000_PBA_26K 0x001A -#define E1000_PBA_30K 0x001E -#define E1000_PBA_32K 0x0020 -#define E1000_PBA_34K 0x0022 -#define E1000_PBA_35K 0x0023 -#define E1000_PBA_38K 0x0026 -#define E1000_PBA_40K 0x0028 -#define E1000_PBA_48K 0x0030 /* 48KB */ -#define E1000_PBA_64K 0x0040 /* 64KB */ +#define E1000_PBA_6K 0x0006 /* 6KB */ +#define E1000_PBA_8K 0x0008 /* 8KB */ +#define E1000_PBA_10K 0x000A /* 10KB */ +#define E1000_PBA_12K 0x000C /* 12KB */ +#define E1000_PBA_14K 0x000E /* 14KB */ +#define E1000_PBA_16K 0x0010 /* 16KB */ +#define E1000_PBA_18K 0x0012 +#define E1000_PBA_20K 0x0014 +#define E1000_PBA_22K 0x0016 +#define E1000_PBA_24K 0x0018 +#define E1000_PBA_26K 0x001A +#define E1000_PBA_30K 0x001E +#define E1000_PBA_32K 0x0020 +#define E1000_PBA_34K 0x0022 +#define E1000_PBA_35K 0x0023 +#define E1000_PBA_38K 0x0026 +#define E1000_PBA_40K 0x0028 +#define E1000_PBA_48K 0x0030 /* 48KB */ +#define E1000_PBA_64K 0x0040 /* 64KB */ #define E1000_PBA_RXA_MASK 0xFFFF -#define E1000_PBS_16K E1000_PBA_16K -#define E1000_PBS_24K E1000_PBA_24K +#define E1000_PBS_16K E1000_PBA_16K +#define E1000_PBS_24K E1000_PBA_24K -#define IFS_MAX 80 -#define IFS_MIN 40 -#define IFS_RATIO 4 -#define IFS_STEP 10 -#define MIN_NUM_XMITS 1000 +#define IFS_MAX 80 +#define IFS_MIN 40 +#define IFS_RATIO 4 +#define IFS_STEP 10 +#define MIN_NUM_XMITS 1000 /* SW Semaphore Register */ -#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ -#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ -#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ -#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ -#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ +#define E1000_SWSM2_LOCK 0x00000002 /* Secondary driver semaphore bit */ /* Interrupt Cause Read */ -#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ -#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ -#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ -#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ -#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ -#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ -#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ -#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ -#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ -#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ -#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ -#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ -#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ -#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ -#define E1000_ICR_TXD_LOW 0x00008000 -#define E1000_ICR_SRPD 0x00010000 -#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ -#define E1000_ICR_MNG 0x00040000 /* Manageability event */ -#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_TXDW 0x00000001 /* Transmit desc written back */ +#define E1000_ICR_TXQE 0x00000002 /* Transmit Queue empty */ +#define E1000_ICR_LSC 0x00000004 /* Link Status Change */ +#define E1000_ICR_RXSEQ 0x00000008 /* Rx sequence error */ +#define E1000_ICR_RXDMT0 0x00000010 /* Rx desc min. threshold (0) */ +#define E1000_ICR_RXO 0x00000040 /* Rx overrun */ +#define E1000_ICR_RXT0 0x00000080 /* Rx timer intr (ring 0) */ +#define E1000_ICR_VMMB 0x00000100 /* VM MB event */ +#define E1000_ICR_MDAC 0x00000200 /* MDIO access complete */ +#define E1000_ICR_RXCFG 0x00000400 /* Rx /c/ ordered set */ +#define E1000_ICR_GPI_EN0 0x00000800 /* GP Int 0 */ +#define E1000_ICR_GPI_EN1 0x00001000 /* GP Int 1 */ +#define E1000_ICR_GPI_EN2 0x00002000 /* GP Int 2 */ +#define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ +#define E1000_ICR_TXD_LOW 0x00008000 +#define E1000_ICR_SRPD 0x00010000 +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ #define E1000_ICR_TS 0x00080000 /* Time Sync Interrupt */ -#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ +#define E1000_ICR_DRSTA 0x40000000 /* Device Reset Asserted */ /* If this bit asserted, the driver should claim the interrupt */ #define E1000_ICR_INT_ASSERTED 0x80000000 -#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* Q0 Rx desc FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* Q0 Tx desc FIFO parity error */ -#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity err */ -#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ -#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* Q1 Rx desc FIFO parity error */ -#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* Q1 Tx desc FIFO parity error */ -#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ +#define E1000_ICR_RXD_FIFO_PAR0 0x00100000 /* Q0 Rx desc FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR0 0x00200000 /* Q0 Tx desc FIFO parity error */ +#define E1000_ICR_HOST_ARB_PAR 0x00400000 /* host arb read buffer parity err */ +#define E1000_ICR_PB_PAR 0x00800000 /* packet buffer parity error */ +#define E1000_ICR_RXD_FIFO_PAR1 0x01000000 /* Q1 Rx desc FIFO parity error */ +#define E1000_ICR_TXD_FIFO_PAR1 0x02000000 /* Q1 Tx desc FIFO parity error */ +#define E1000_ICR_ALL_PARITY 0x03F00000 /* all parity error bits */ /* FW changed the status of DISSW bit in the FWSM */ #define E1000_ICR_DSW 0x00000020 /* LAN connected device generates an interrupt */ #define E1000_ICR_PHYINT 0x00001000 -#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ -#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */ +#define E1000_ICR_DOUTSYNC 0x10000000 /* NIC DMA out of sync */ +#define E1000_ICR_EPRST 0x00100000 /* ME hardware reset occurs */ #define E1000_ICR_RXQ0 0x00100000 /* Rx Queue 0 Interrupt */ #define E1000_ICR_RXQ1 0x00200000 /* Rx Queue 1 Interrupt */ #define E1000_ICR_TXQ0 0x00400000 /* Tx Queue 0 Interrupt */ #define E1000_ICR_TXQ1 0x00800000 /* Tx Queue 1 Interrupt */ #define E1000_ICR_OTHER 0x01000000 /* Other Interrupts */ -#define E1000_ICR_FER 0x00400000 /* Fatal Error */ +#define E1000_ICR_FER 0x00400000 /* Fatal Error */ -#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ -#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ +#define E1000_ICR_THS 0x00800000 /* ICR.THS: Thermal Sensor Event*/ +#define E1000_ICR_MDDET 0x10000000 /* Malicious Driver Detect */ #define E1000_ITR_MASK 0x000FFFFF /* ITR value bitfield */ #define E1000_ITR_MULT 256 /* ITR mulitplier in nsec */ @@ -856,21 +856,21 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_PBA_ECC_INT_EN 0x00000004 /* Enable ICR bit 5 on ECC error */ /* Extended Interrupt Cause Read */ -#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ -#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ -#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ -#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ -#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ -#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ -#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ -#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ -#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ -#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ +#define E1000_EICR_RX_QUEUE0 0x00000001 /* Rx Queue 0 Interrupt */ +#define E1000_EICR_RX_QUEUE1 0x00000002 /* Rx Queue 1 Interrupt */ +#define E1000_EICR_RX_QUEUE2 0x00000004 /* Rx Queue 2 Interrupt */ +#define E1000_EICR_RX_QUEUE3 0x00000008 /* Rx Queue 3 Interrupt */ +#define E1000_EICR_TX_QUEUE0 0x00000100 /* Tx Queue 0 Interrupt */ +#define E1000_EICR_TX_QUEUE1 0x00000200 /* Tx Queue 1 Interrupt */ +#define E1000_EICR_TX_QUEUE2 0x00000400 /* Tx Queue 2 Interrupt */ +#define E1000_EICR_TX_QUEUE3 0x00000800 /* Tx Queue 3 Interrupt */ +#define E1000_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define E1000_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ /* TCP Timer */ -#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ -#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ -#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ -#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ +#define E1000_TCPTIMER_KS 0x00000100 /* KickStart */ +#define E1000_TCPTIMER_COUNT_ENABLE 0x00000200 /* Count Enable */ +#define E1000_TCPTIMER_COUNT_FINISH 0x00000400 /* Count finish */ +#define E1000_TCPTIMER_LOOP 0x00000800 /* Loop */ /* * This defines the bits that are set in the Interrupt Mask @@ -879,8 +879,8 @@ POSSIBILITY OF SUCH DAMAGE. * o RXSEQ = Receive Sequence Error */ #define POLL_IMS_ENABLE_MASK ( \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ) + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ) /* * This defines the bits that are set in the Interrupt Mask @@ -892,34 +892,34 @@ POSSIBILITY OF SUCH DAMAGE. * o LSC = Link Status Change */ #define IMS_ENABLE_MASK ( \ - E1000_IMS_RXT0 | \ - E1000_IMS_TXDW | \ - E1000_IMS_RXDMT0 | \ - E1000_IMS_RXSEQ | \ - E1000_IMS_LSC) + E1000_IMS_RXT0 | \ + E1000_IMS_TXDW | \ + E1000_IMS_RXDMT0 | \ + E1000_IMS_RXSEQ | \ + E1000_IMS_LSC) /* Interrupt Mask Set */ -#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ -#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ -#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ -#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ -#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ -#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ -#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */ -#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ -#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW -#define E1000_IMS_SRPD E1000_ICR_SRPD -#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_IMS_TXDW E1000_ICR_TXDW /* Tx desc written back */ +#define E1000_IMS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_IMS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_IMS_VMMB E1000_ICR_VMMB /* Mail box activity */ +#define E1000_IMS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_IMS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_IMS_RXO E1000_ICR_RXO /* Rx overrun */ +#define E1000_IMS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_IMS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_IMS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */ +#define E1000_IMS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_IMS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_IMS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW +#define E1000_IMS_SRPD E1000_ICR_SRPD +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ #define E1000_IMS_TS E1000_ICR_TS /* Time Sync Interrupt */ -#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ +#define E1000_IMS_DRSTA E1000_ICR_DRSTA /* Device Reset Asserted */ /* Q0 Rx desc FIFO parity error */ #define E1000_IMS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Tx desc FIFO parity error */ @@ -932,51 +932,51 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_IMS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Tx desc FIFO parity error */ #define E1000_IMS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 -#define E1000_IMS_DSW E1000_ICR_DSW -#define E1000_IMS_PHYINT E1000_ICR_PHYINT -#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ -#define E1000_IMS_EPRST E1000_ICR_EPRST +#define E1000_IMS_DSW E1000_ICR_DSW +#define E1000_IMS_PHYINT E1000_ICR_PHYINT +#define E1000_IMS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ +#define E1000_IMS_EPRST E1000_ICR_EPRST #define E1000_IMS_RXQ0 E1000_ICR_RXQ0 /* Rx Queue 0 Interrupt */ #define E1000_IMS_RXQ1 E1000_ICR_RXQ1 /* Rx Queue 1 Interrupt */ #define E1000_IMS_TXQ0 E1000_ICR_TXQ0 /* Tx Queue 0 Interrupt */ #define E1000_IMS_TXQ1 E1000_ICR_TXQ1 /* Tx Queue 1 Interrupt */ #define E1000_IMS_OTHER E1000_ICR_OTHER /* Other Interrupts */ -#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ +#define E1000_IMS_FER E1000_ICR_FER /* Fatal Error */ -#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ -#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ +#define E1000_IMS_THS E1000_ICR_THS /* ICR.TS: Thermal Sensor Event*/ +#define E1000_IMS_MDDET E1000_ICR_MDDET /* Malicious Driver Detect */ /* Extended Interrupt Mask Set */ -#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ -#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ -#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ -#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ -#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ -#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ -#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ -#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ -#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ -#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ +#define E1000_EIMS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EIMS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EIMS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EIMS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EIMS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EIMS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EIMS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EIMS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EIMS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EIMS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ /* Interrupt Cause Set */ -#define E1000_ICS_TXDW E1000_ICR_TXDW /* Tx desc written back */ -#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ -#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ -#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ -#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ -#define E1000_ICS_RXO E1000_ICR_RXO /* Rx overrun */ -#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ -#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ -#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */ -#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ -#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ -#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ -#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ -#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW -#define E1000_ICS_SRPD E1000_ICR_SRPD -#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ -#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ -#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ -#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */ +#define E1000_ICS_TXDW E1000_ICR_TXDW /* Tx desc written back */ +#define E1000_ICS_TXQE E1000_ICR_TXQE /* Transmit Queue empty */ +#define E1000_ICS_LSC E1000_ICR_LSC /* Link Status Change */ +#define E1000_ICS_RXSEQ E1000_ICR_RXSEQ /* Rx sequence error */ +#define E1000_ICS_RXDMT0 E1000_ICR_RXDMT0 /* Rx desc min. threshold */ +#define E1000_ICS_RXO E1000_ICR_RXO /* Rx overrun */ +#define E1000_ICS_RXT0 E1000_ICR_RXT0 /* Rx timer intr */ +#define E1000_ICS_MDAC E1000_ICR_MDAC /* MDIO access complete */ +#define E1000_ICS_RXCFG E1000_ICR_RXCFG /* Rx /c/ ordered set */ +#define E1000_ICS_GPI_EN0 E1000_ICR_GPI_EN0 /* GP Int 0 */ +#define E1000_ICS_GPI_EN1 E1000_ICR_GPI_EN1 /* GP Int 1 */ +#define E1000_ICS_GPI_EN2 E1000_ICR_GPI_EN2 /* GP Int 2 */ +#define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ +#define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW +#define E1000_ICS_SRPD E1000_ICR_SRPD +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ +#define E1000_ICS_DRSTA E1000_ICR_DRSTA /* Device Reset Aserted */ /* Q0 Rx desc FIFO parity error */ #define E1000_ICS_RXD_FIFO_PAR0 E1000_ICR_RXD_FIFO_PAR0 /* Q0 Tx desc FIFO parity error */ @@ -989,46 +989,46 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_ICS_RXD_FIFO_PAR1 E1000_ICR_RXD_FIFO_PAR1 /* Q1 Tx desc FIFO parity error */ #define E1000_ICS_TXD_FIFO_PAR1 E1000_ICR_TXD_FIFO_PAR1 -#define E1000_ICS_DSW E1000_ICR_DSW -#define E1000_ICS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ -#define E1000_ICS_PHYINT E1000_ICR_PHYINT -#define E1000_ICS_EPRST E1000_ICR_EPRST +#define E1000_ICS_DSW E1000_ICR_DSW +#define E1000_ICS_DOUTSYNC E1000_ICR_DOUTSYNC /* NIC DMA out of sync */ +#define E1000_ICS_PHYINT E1000_ICR_PHYINT +#define E1000_ICS_EPRST E1000_ICR_EPRST /* Extended Interrupt Cause Set */ -#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ -#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ -#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ -#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ -#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ -#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ -#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ -#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ -#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ -#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ - -#define E1000_EITR_ITR_INT_MASK 0x0000FFFF +#define E1000_EICS_RX_QUEUE0 E1000_EICR_RX_QUEUE0 /* Rx Queue 0 Interrupt */ +#define E1000_EICS_RX_QUEUE1 E1000_EICR_RX_QUEUE1 /* Rx Queue 1 Interrupt */ +#define E1000_EICS_RX_QUEUE2 E1000_EICR_RX_QUEUE2 /* Rx Queue 2 Interrupt */ +#define E1000_EICS_RX_QUEUE3 E1000_EICR_RX_QUEUE3 /* Rx Queue 3 Interrupt */ +#define E1000_EICS_TX_QUEUE0 E1000_EICR_TX_QUEUE0 /* Tx Queue 0 Interrupt */ +#define E1000_EICS_TX_QUEUE1 E1000_EICR_TX_QUEUE1 /* Tx Queue 1 Interrupt */ +#define E1000_EICS_TX_QUEUE2 E1000_EICR_TX_QUEUE2 /* Tx Queue 2 Interrupt */ +#define E1000_EICS_TX_QUEUE3 E1000_EICR_TX_QUEUE3 /* Tx Queue 3 Interrupt */ +#define E1000_EICS_TCP_TIMER E1000_EICR_TCP_TIMER /* TCP Timer */ +#define E1000_EICS_OTHER E1000_EICR_OTHER /* Interrupt Cause Active */ + +#define E1000_EITR_ITR_INT_MASK 0x0000FFFF /* E1000_EITR_CNT_IGNR is only for 82576 and newer */ -#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ +#define E1000_EITR_CNT_IGNR 0x80000000 /* Don't reset counters on write */ /* Transmit Descriptor Control */ -#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ -#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ -#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ -#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ -#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ -#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_PTHRESH 0x0000003F /* TXDCTL Prefetch Threshold */ +#define E1000_TXDCTL_HTHRESH 0x00003F00 /* TXDCTL Host Threshold */ +#define E1000_TXDCTL_WTHRESH 0x003F0000 /* TXDCTL Writeback Threshold */ +#define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ +#define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ +#define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ #define E1000_TXDCTL_MAX_TX_DESC_PREFETCH 0x0100001F /* GRAN=1, PTHRESH=31 */ /* Enable the counting of descriptors still to be processed. */ -#define E1000_TXDCTL_COUNT_DESC 0x00400000 +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Flow Control Constants */ -#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 -#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 -#define FLOW_CONTROL_TYPE 0x8808 +#define FLOW_CONTROL_ADDRESS_LOW 0x00C28001 +#define FLOW_CONTROL_ADDRESS_HIGH 0x00000100 +#define FLOW_CONTROL_TYPE 0x8808 /* 802.1q VLAN Packet Size */ -#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ -#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ +#define VLAN_TAG_SIZE 4 /* 802.3ac tag (not DMA'd) */ +#define E1000_VLAN_FILTER_TBL_SIZE 128 /* VLAN Filter Table (4096 bits) */ /* Receive Address */ /* @@ -1038,88 +1038,88 @@ POSSIBILITY OF SUCH DAMAGE. * (RAR[15]) for our directed address used by controllers with * manageability enabled, allowing us room for 15 multicast addresses. */ -#define E1000_RAR_ENTRIES 15 -#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ -#define E1000_RAL_MAC_ADDR_LEN 4 -#define E1000_RAH_MAC_ADDR_LEN 2 -#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 -#define E1000_RAH_POOL_MASK 0x03FC0000 -#define E1000_RAH_POOL_SHIFT 18 -#define E1000_RAH_POOL_1 0x00040000 +#define E1000_RAR_ENTRIES 15 +#define E1000_RAH_AV 0x80000000 /* Receive descriptor valid */ +#define E1000_RAL_MAC_ADDR_LEN 4 +#define E1000_RAH_MAC_ADDR_LEN 2 +#define E1000_RAH_QUEUE_MASK_82575 0x000C0000 +#define E1000_RAH_POOL_MASK 0x03FC0000 +#define E1000_RAH_POOL_SHIFT 18 +#define E1000_RAH_POOL_1 0x00040000 /* Error Codes */ -#define E1000_SUCCESS 0 -#define E1000_ERR_NVM 1 -#define E1000_ERR_PHY 2 -#define E1000_ERR_CONFIG 3 -#define E1000_ERR_PARAM 4 -#define E1000_ERR_MAC_INIT 5 -#define E1000_ERR_PHY_TYPE 6 -#define E1000_ERR_RESET 9 -#define E1000_ERR_MASTER_REQUESTS_PENDING 10 -#define E1000_ERR_HOST_INTERFACE_COMMAND 11 -#define E1000_BLK_PHY_RESET 12 -#define E1000_ERR_SWFW_SYNC 13 -#define E1000_NOT_IMPLEMENTED 14 -#define E1000_ERR_MBX 15 -#define E1000_ERR_INVALID_ARGUMENT 16 -#define E1000_ERR_NO_SPACE 17 -#define E1000_ERR_NVM_PBA_SECTION 18 +#define E1000_SUCCESS 0 +#define E1000_ERR_NVM 1 +#define E1000_ERR_PHY 2 +#define E1000_ERR_CONFIG 3 +#define E1000_ERR_PARAM 4 +#define E1000_ERR_MAC_INIT 5 +#define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 +#define E1000_ERR_SWFW_SYNC 13 +#define E1000_NOT_IMPLEMENTED 14 +#define E1000_ERR_MBX 15 +#define E1000_ERR_INVALID_ARGUMENT 16 +#define E1000_ERR_NO_SPACE 17 +#define E1000_ERR_NVM_PBA_SECTION 18 #define E1000_ERR_I2C 19 #define E1000_ERR_INVM_VALUE_NOT_FOUND 20 /* Loop limit on how long we wait for auto-negotiation to complete */ -#define FIBER_LINK_UP_LIMIT 50 -#define COPPER_LINK_UP_LIMIT 10 -#define PHY_AUTO_NEG_LIMIT 45 -#define PHY_FORCE_LIMIT 20 +#define FIBER_LINK_UP_LIMIT 50 +#define COPPER_LINK_UP_LIMIT 10 +#define PHY_AUTO_NEG_LIMIT 45 +#define PHY_FORCE_LIMIT 20 /* Number of 100 microseconds we wait for PCI Express master disable */ -#define MASTER_DISABLE_TIMEOUT 800 +#define MASTER_DISABLE_TIMEOUT 800 /* Number of milliseconds we wait for PHY configuration done after MAC reset */ -#define PHY_CFG_TIMEOUT 100 +#define PHY_CFG_TIMEOUT 100 /* Number of 2 milliseconds we wait for acquiring MDIO ownership. */ -#define MDIO_OWNERSHIP_TIMEOUT 10 +#define MDIO_OWNERSHIP_TIMEOUT 10 /* Number of milliseconds for NVM auto read done after MAC reset. */ -#define AUTO_READ_DONE_TIMEOUT 10 +#define AUTO_READ_DONE_TIMEOUT 10 /* Flow Control */ -#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ -#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ -#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ -#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +#define E1000_FCRTH_RTH 0x0000FFF8 /* Mask Bits[15:3] for RTH */ +#define E1000_FCRTH_XFCE 0x80000000 /* External Flow Control Enable */ +#define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ +#define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ /* Transmit Configuration Word */ -#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ -#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ -#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ -#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ -#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ -#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ -#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ -#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ -#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ -#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ +#define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ +#define E1000_TXCW_HD 0x00000040 /* TXCW half duplex */ +#define E1000_TXCW_PAUSE 0x00000080 /* TXCW sym pause request */ +#define E1000_TXCW_ASM_DIR 0x00000100 /* TXCW astm pause direction */ +#define E1000_TXCW_PAUSE_MASK 0x00000180 /* TXCW pause request mask */ +#define E1000_TXCW_RF 0x00003000 /* TXCW remote fault */ +#define E1000_TXCW_NP 0x00008000 /* TXCW next page */ +#define E1000_TXCW_CW 0x0000ffff /* TxConfigWord mask */ +#define E1000_TXCW_TXC 0x40000000 /* Transmit Config control */ +#define E1000_TXCW_ANE 0x80000000 /* Auto-neg enable */ /* Receive Configuration Word */ -#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ -#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ -#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ -#define E1000_RXCW_CC 0x10000000 /* Receive config change */ -#define E1000_RXCW_C 0x20000000 /* Receive config */ -#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ -#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ - -#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ -#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ - -#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ -#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ -#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 -#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 -#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 -#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 -#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A -#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ +#define E1000_RXCW_CW 0x0000ffff /* RxConfigWord mask */ +#define E1000_RXCW_NC 0x04000000 /* Receive config no carrier */ +#define E1000_RXCW_IV 0x08000000 /* Receive config invalid */ +#define E1000_RXCW_CC 0x10000000 /* Receive config change */ +#define E1000_RXCW_C 0x20000000 /* Receive config */ +#define E1000_RXCW_SYNCH 0x40000000 /* Receive config synch */ +#define E1000_RXCW_ANC 0x80000000 /* Auto-neg complete */ + +#define E1000_TSYNCTXCTL_VALID 0x00000001 /* Tx timestamp valid */ +#define E1000_TSYNCTXCTL_ENABLED 0x00000010 /* enable Tx timestamping */ + +#define E1000_TSYNCRXCTL_VALID 0x00000001 /* Rx timestamp valid */ +#define E1000_TSYNCRXCTL_TYPE_MASK 0x0000000E /* Rx type mask */ +#define E1000_TSYNCRXCTL_TYPE_L2_V2 0x00 +#define E1000_TSYNCRXCTL_TYPE_L4_V1 0x02 +#define E1000_TSYNCRXCTL_TYPE_L2_L4_V2 0x04 +#define E1000_TSYNCRXCTL_TYPE_ALL 0x08 +#define E1000_TSYNCRXCTL_TYPE_EVENT_V2 0x0A +#define E1000_TSYNCRXCTL_ENABLED 0x00000010 /* enable Rx timestamping */ #define E1000_TSYNCRXCTL_SYSCFI 0x00000020 /* Sys clock frequency */ #define E1000_RXMTRL_PTP_V1_SYNC_MESSAGE 0x00000000 @@ -1128,90 +1128,90 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_RXMTRL_PTP_V2_SYNC_MESSAGE 0x00000000 #define E1000_RXMTRL_PTP_V2_DELAY_REQ_MESSAGE 0x01000000 -#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF -#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 -#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 -#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 -#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 -#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 - -#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 -#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 -#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 -#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 -#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 -#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 -#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 -#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 -#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 - -#define E1000_TIMINCA_16NS_SHIFT 24 +#define E1000_TSYNCRXCFG_PTP_V1_CTRLT_MASK 0x000000FF +#define E1000_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE 0x00 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE 0x01 +#define E1000_TSYNCRXCFG_PTP_V1_FOLLOWUP_MESSAGE 0x02 +#define E1000_TSYNCRXCFG_PTP_V1_DELAY_RESP_MESSAGE 0x03 +#define E1000_TSYNCRXCFG_PTP_V1_MANAGEMENT_MESSAGE 0x04 + +#define E1000_TSYNCRXCFG_PTP_V2_MSGID_MASK 0x00000F00 +#define E1000_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE 0x0000 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE 0x0100 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_REQ_MESSAGE 0x0200 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_RESP_MESSAGE 0x0300 +#define E1000_TSYNCRXCFG_PTP_V2_FOLLOWUP_MESSAGE 0x0800 +#define E1000_TSYNCRXCFG_PTP_V2_DELAY_RESP_MESSAGE 0x0900 +#define E1000_TSYNCRXCFG_PTP_V2_PATH_DELAY_FOLLOWUP_MESSAGE 0x0A00 +#define E1000_TSYNCRXCFG_PTP_V2_ANNOUNCE_MESSAGE 0x0B00 +#define E1000_TSYNCRXCFG_PTP_V2_SIGNALLING_MESSAGE 0x0C00 +#define E1000_TSYNCRXCFG_PTP_V2_MANAGEMENT_MESSAGE 0x0D00 + +#define E1000_TIMINCA_16NS_SHIFT 24 #define E1000_TIMINCA_INCPERIOD_SHIFT 24 #define E1000_TIMINCA_INCVALUE_MASK 0x00FFFFFF #define E1000_TSICR_TXTS 0x00000002 #define E1000_TSIM_TXTS 0x00000002 /* TUPLE Filtering Configuration */ -#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ -#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ -#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ +#define E1000_TTQF_DISABLE_MASK 0xF0008000 /* TTQF Disable Mask */ +#define E1000_TTQF_QUEUE_ENABLE 0x100 /* TTQF Queue Enable Bit */ +#define E1000_TTQF_PROTOCOL_MASK 0xFF /* TTQF Protocol Mask */ /* TTQF TCP Bit, shift with E1000_TTQF_PROTOCOL SHIFT */ -#define E1000_TTQF_PROTOCOL_TCP 0x0 +#define E1000_TTQF_PROTOCOL_TCP 0x0 /* TTQF UDP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ -#define E1000_TTQF_PROTOCOL_UDP 0x1 +#define E1000_TTQF_PROTOCOL_UDP 0x1 /* TTQF SCTP Bit, shift with E1000_TTQF_PROTOCOL_SHIFT */ -#define E1000_TTQF_PROTOCOL_SCTP 0x2 -#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ -#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ -#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ -#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ -#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ -#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ -#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ -#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ - -#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ -#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ -#define E1000_MDICNFG_PHY_MASK 0x03E00000 -#define E1000_MDICNFG_PHY_SHIFT 21 - -#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ -#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ -#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ -#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ +#define E1000_TTQF_PROTOCOL_SCTP 0x2 +#define E1000_TTQF_PROTOCOL_SHIFT 5 /* TTQF Protocol Shift */ +#define E1000_TTQF_QUEUE_SHIFT 16 /* TTQF Queue Shfit */ +#define E1000_TTQF_RX_QUEUE_MASK 0x70000 /* TTQF Queue Mask */ +#define E1000_TTQF_MASK_ENABLE 0x10000000 /* TTQF Mask Enable Bit */ +#define E1000_IMIR_CLEAR_MASK 0xF001FFFF /* IMIR Reg Clear Mask */ +#define E1000_IMIR_PORT_BYPASS 0x20000 /* IMIR Port Bypass Bit */ +#define E1000_IMIR_PRIORITY_SHIFT 29 /* IMIR Priority Shift */ +#define E1000_IMIREXT_CLEAR_MASK 0x7FFFF /* IMIREXT Reg Clear Mask */ + +#define E1000_MDICNFG_EXT_MDIO 0x80000000 /* MDI ext/int destination */ +#define E1000_MDICNFG_COM_MDIO 0x40000000 /* MDI shared w/ lan 0 */ +#define E1000_MDICNFG_PHY_MASK 0x03E00000 +#define E1000_MDICNFG_PHY_SHIFT 21 + +#define E1000_THSTAT_LOW_EVENT 0x20000000 /* Low thermal threshold */ +#define E1000_THSTAT_MID_EVENT 0x00200000 /* Mid thermal threshold */ +#define E1000_THSTAT_HIGH_EVENT 0x00002000 /* High thermal threshold */ +#define E1000_THSTAT_PWR_DOWN 0x00000001 /* Power Down Event */ #define E1000_THSTAT_LINK_THROTTLE 0x00000002 /* Link Spd Throttle Event */ /* I350 EEE defines */ #define E1000_IPCNFG_EEE_1G_AN 0x00000008 /* IPCNFG EEE Ena 1G AN */ #define E1000_IPCNFG_EEE_100M_AN 0x00000004 /* IPCNFG EEE Ena 100M AN */ -#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ -#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ +#define E1000_EEER_TX_LPI_EN 0x00010000 /* EEER Tx LPI Enable */ +#define E1000_EEER_RX_LPI_EN 0x00020000 /* EEER Rx LPI Enable */ #define E1000_EEER_LPI_FC 0x00040000 /* EEER Ena on Flow Cntrl */ /* EEE status */ #define E1000_EEER_EEE_NEG 0x20000000 /* EEE capability nego */ -#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ -#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ +#define E1000_EEER_RX_LPI_STATUS 0x40000000 /* Rx in LPI state */ +#define E1000_EEER_TX_LPI_STATUS 0x80000000 /* Tx in LPI state */ #define E1000_EEE_SU_LPI_CLK_STP 0x00800000 /* EEE LPI Clock Stop */ /* PCI Express Control */ -#define E1000_GCR_RXD_NO_SNOOP 0x00000001 -#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 -#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 -#define E1000_GCR_TXD_NO_SNOOP 0x00000008 -#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 -#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 -#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 -#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 -#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 -#define E1000_GCR_CAP_VER2 0x00040000 - -#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ - E1000_GCR_RXDSCW_NO_SNOOP | \ - E1000_GCR_RXDSCR_NO_SNOOP | \ - E1000_GCR_TXD_NO_SNOOP | \ - E1000_GCR_TXDSCW_NO_SNOOP | \ - E1000_GCR_TXDSCR_NO_SNOOP) +#define E1000_GCR_RXD_NO_SNOOP 0x00000001 +#define E1000_GCR_RXDSCW_NO_SNOOP 0x00000002 +#define E1000_GCR_RXDSCR_NO_SNOOP 0x00000004 +#define E1000_GCR_TXD_NO_SNOOP 0x00000008 +#define E1000_GCR_TXDSCW_NO_SNOOP 0x00000010 +#define E1000_GCR_TXDSCR_NO_SNOOP 0x00000020 +#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define E1000_GCR_CMPL_TMOUT_10ms 0x00001000 +#define E1000_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define E1000_GCR_CAP_VER2 0x00040000 + +#define PCIE_NO_SNOOP_ALL (E1000_GCR_RXD_NO_SNOOP | \ + E1000_GCR_RXDSCW_NO_SNOOP | \ + E1000_GCR_RXDSCR_NO_SNOOP | \ + E1000_GCR_TXD_NO_SNOOP | \ + E1000_GCR_TXDSCW_NO_SNOOP | \ + E1000_GCR_TXDSCR_NO_SNOOP) /* mPHY address control and data registers */ #define E1000_MPHY_ADDR_CTL 0x0024 /* Address Control Reg */ @@ -1224,73 +1224,73 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_MPHY_PCS_CLK_REG_DIGINELBEN 0x10 /* PHY Control Register */ -#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ -#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ -#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ -#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ -#define MII_CR_POWER_DOWN 0x0800 /* Power down */ -#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ -#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ -#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ -#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ -#define MII_CR_SPEED_1000 0x0040 -#define MII_CR_SPEED_100 0x2000 -#define MII_CR_SPEED_10 0x0000 +#define MII_CR_SPEED_SELECT_MSB 0x0040 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_COLL_TEST_ENABLE 0x0080 /* Collision test enable */ +#define MII_CR_FULL_DUPLEX 0x0100 /* FDX =1, half duplex =0 */ +#define MII_CR_RESTART_AUTO_NEG 0x0200 /* Restart auto negotiation */ +#define MII_CR_ISOLATE 0x0400 /* Isolate PHY from MII */ +#define MII_CR_POWER_DOWN 0x0800 /* Power down */ +#define MII_CR_AUTO_NEG_EN 0x1000 /* Auto Neg Enable */ +#define MII_CR_SPEED_SELECT_LSB 0x2000 /* bits 6,13: 10=1000, 01=100, 00=10 */ +#define MII_CR_LOOPBACK 0x4000 /* 0 = normal, 1 = loopback */ +#define MII_CR_RESET 0x8000 /* 0 = normal, 1 = PHY reset */ +#define MII_CR_SPEED_1000 0x0040 +#define MII_CR_SPEED_100 0x2000 +#define MII_CR_SPEED_10 0x0000 /* PHY Status Register */ -#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ -#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ -#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ -#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ -#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ -#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ +#define MII_SR_EXTENDED_CAPS 0x0001 /* Extended register capabilities */ +#define MII_SR_JABBER_DETECT 0x0002 /* Jabber Detected */ +#define MII_SR_LINK_STATUS 0x0004 /* Link Status 1 = link */ +#define MII_SR_AUTONEG_CAPS 0x0008 /* Auto Neg Capable */ +#define MII_SR_REMOTE_FAULT 0x0010 /* Remote Fault Detect */ +#define MII_SR_AUTONEG_COMPLETE 0x0020 /* Auto Neg Complete */ #define MII_SR_PREAMBLE_SUPPRESS 0x0040 /* Preamble may be suppressed */ -#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ -#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ -#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ -#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ -#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ -#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ -#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ -#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ +#define MII_SR_EXTENDED_STATUS 0x0100 /* Ext. status info in Reg 0x0F */ +#define MII_SR_100T2_HD_CAPS 0x0200 /* 100T2 Half Duplex Capable */ +#define MII_SR_100T2_FD_CAPS 0x0400 /* 100T2 Full Duplex Capable */ +#define MII_SR_10T_HD_CAPS 0x0800 /* 10T Half Duplex Capable */ +#define MII_SR_10T_FD_CAPS 0x1000 /* 10T Full Duplex Capable */ +#define MII_SR_100X_HD_CAPS 0x2000 /* 100X Half Duplex Capable */ +#define MII_SR_100X_FD_CAPS 0x4000 /* 100X Full Duplex Capable */ +#define MII_SR_100T4_CAPS 0x8000 /* 100T4 Capable */ /* Autoneg Advertisement Register */ -#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ -#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ -#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ -#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ -#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ -#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ -#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ -#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ -#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ -#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_AR_SELECTOR_FIELD 0x0001 /* indicates IEEE 802.3 CSMA/CD */ +#define NWAY_AR_10T_HD_CAPS 0x0020 /* 10T Half Duplex Capable */ +#define NWAY_AR_10T_FD_CAPS 0x0040 /* 10T Full Duplex Capable */ +#define NWAY_AR_100TX_HD_CAPS 0x0080 /* 100TX Half Duplex Capable */ +#define NWAY_AR_100TX_FD_CAPS 0x0100 /* 100TX Full Duplex Capable */ +#define NWAY_AR_100T4_CAPS 0x0200 /* 100T4 Capable */ +#define NWAY_AR_PAUSE 0x0400 /* Pause operation desired */ +#define NWAY_AR_ASM_DIR 0x0800 /* Asymmetric Pause Direction bit */ +#define NWAY_AR_REMOTE_FAULT 0x2000 /* Remote Fault detected */ +#define NWAY_AR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Link Partner Ability Register (Base Page) */ -#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ +#define NWAY_LPAR_SELECTOR_FIELD 0x0000 /* LP protocol selector field */ #define NWAY_LPAR_10T_HD_CAPS 0x0020 /* LP 10T Half Dplx Capable */ #define NWAY_LPAR_10T_FD_CAPS 0x0040 /* LP 10T Full Dplx Capable */ #define NWAY_LPAR_100TX_HD_CAPS 0x0080 /* LP 100TX Half Dplx Capable */ #define NWAY_LPAR_100TX_FD_CAPS 0x0100 /* LP 100TX Full Dplx Capable */ -#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ -#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ +#define NWAY_LPAR_100T4_CAPS 0x0200 /* LP is 100T4 Capable */ +#define NWAY_LPAR_PAUSE 0x0400 /* LP Pause operation desired */ #define NWAY_LPAR_ASM_DIR 0x0800 /* LP Asym Pause Direction bit */ #define NWAY_LPAR_REMOTE_FAULT 0x2000 /* LP detected Remote Fault */ #define NWAY_LPAR_ACKNOWLEDGE 0x4000 /* LP rx'd link code word */ -#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ +#define NWAY_LPAR_NEXT_PAGE 0x8000 /* Next Page ability supported */ /* Autoneg Expansion Register */ -#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ +#define NWAY_ER_LP_NWAY_CAPS 0x0001 /* LP has Auto Neg Capability */ #define NWAY_ER_PAGE_RXD 0x0002 /* LP 10T Half Dplx Capable */ #define NWAY_ER_NEXT_PAGE_CAPS 0x0004 /* LP 10T Full Dplx Capable */ #define NWAY_ER_LP_NEXT_PAGE_CAPS 0x0008 /* LP 100TX Half Dplx Capable */ #define NWAY_ER_PAR_DETECT_FAULT 0x0010 /* LP 100TX Full Dplx Capable */ /* 1000BASE-T Control Register */ -#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ -#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ -#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ +#define CR_1000T_ASYM_PAUSE 0x0080 /* Advertise asymmetric pause bit */ +#define CR_1000T_HD_CAPS 0x0100 /* Advertise 1000T HD capability */ +#define CR_1000T_FD_CAPS 0x0200 /* Advertise 1000T FD capability */ /* 1=Repeater/switch device port 0=DTE device */ #define CR_1000T_REPEATER_DTE 0x0400 /* 1=Configure PHY as Master 0=Configure PHY as Slave */ @@ -1298,75 +1298,75 @@ POSSIBILITY OF SUCH DAMAGE. /* 1=Master/Slave manual config value 0=Automatic Master/Slave config */ #define CR_1000T_MS_ENABLE 0x1000 #define CR_1000T_TEST_MODE_NORMAL 0x0000 /* Normal Operation */ -#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ -#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ -#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ -#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ +#define CR_1000T_TEST_MODE_1 0x2000 /* Transmit Waveform test */ +#define CR_1000T_TEST_MODE_2 0x4000 /* Master Transmit Jitter test */ +#define CR_1000T_TEST_MODE_3 0x6000 /* Slave Transmit Jitter test */ +#define CR_1000T_TEST_MODE_4 0x8000 /* Transmitter Distortion test */ /* 1000BASE-T Status Register */ #define SR_1000T_IDLE_ERROR_CNT 0x00FF /* Num idle err since last rd */ #define SR_1000T_ASYM_PAUSE_DIR 0x0100 /* LP asym pause direction bit */ -#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ -#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ -#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ -#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ +#define SR_1000T_LP_HD_CAPS 0x0400 /* LP is 1000T HD capable */ +#define SR_1000T_LP_FD_CAPS 0x0800 /* LP is 1000T FD capable */ +#define SR_1000T_REMOTE_RX_STATUS 0x1000 /* Remote receiver OK */ +#define SR_1000T_LOCAL_RX_STATUS 0x2000 /* Local receiver OK */ #define SR_1000T_MS_CONFIG_RES 0x4000 /* 1=Local Tx Master, 0=Slave */ -#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ +#define SR_1000T_MS_CONFIG_FAULT 0x8000 /* Master/Slave config fault */ -#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 +#define SR_1000T_PHY_EXCESSIVE_IDLE_ERR_COUNT 5 /* PHY 1000 MII Register/Bit Definitions */ /* PHY Registers defined by IEEE */ -#define PHY_CONTROL 0x00 /* Control Register */ -#define PHY_STATUS 0x01 /* Status Register */ -#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ -#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ -#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ -#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ -#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ -#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ -#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ -#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ -#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ -#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ - -#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ +#define PHY_CONTROL 0x00 /* Control Register */ +#define PHY_STATUS 0x01 /* Status Register */ +#define PHY_ID1 0x02 /* Phy Id Reg (word 1) */ +#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */ +#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */ +#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */ +#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */ +#define PHY_NEXT_PAGE_TX 0x07 /* Next Page Tx */ +#define PHY_LP_NEXT_PAGE 0x08 /* Link Partner Next Page */ +#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */ +#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */ +#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */ + +#define PHY_CONTROL_LB 0x4000 /* PHY Loopback bit */ /* NVM Control */ -#define E1000_EECD_SK 0x00000001 /* NVM Clock */ -#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ -#define E1000_EECD_DI 0x00000004 /* NVM Data In */ -#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ -#define E1000_EECD_FWE_MASK 0x00000030 -#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ -#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ -#define E1000_EECD_FWE_SHIFT 4 -#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ -#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ -#define E1000_EECD_PRES 0x00000100 /* NVM Present */ -#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ -#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ -#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ -#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ -#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ +#define E1000_EECD_SK 0x00000001 /* NVM Clock */ +#define E1000_EECD_CS 0x00000002 /* NVM Chip Select */ +#define E1000_EECD_DI 0x00000004 /* NVM Data In */ +#define E1000_EECD_DO 0x00000008 /* NVM Data Out */ +#define E1000_EECD_FWE_MASK 0x00000030 +#define E1000_EECD_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define E1000_EECD_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define E1000_EECD_FWE_SHIFT 4 +#define E1000_EECD_REQ 0x00000040 /* NVM Access Request */ +#define E1000_EECD_GNT 0x00000080 /* NVM Access Grant */ +#define E1000_EECD_PRES 0x00000100 /* NVM Present */ +#define E1000_EECD_SIZE 0x00000200 /* NVM Size (0=64 word 1=256 word) */ +#define E1000_EECD_BLOCKED 0x00008000 /* Bit banging access blocked flag */ +#define E1000_EECD_ABORT 0x00010000 /* NVM operation aborted flag */ +#define E1000_EECD_TIMEOUT 0x00020000 /* NVM read operation timeout flag */ +#define E1000_EECD_ERROR_CLR 0x00040000 /* NVM error status clear bit */ /* NVM Addressing bits based on type 0=small, 1=large */ -#define E1000_EECD_ADDR_BITS 0x00000400 -#define E1000_EECD_TYPE 0x00002000 /* NVM Type (1-SPI, 0-Microwire) */ +#define E1000_EECD_ADDR_BITS 0x00000400 +#define E1000_EECD_TYPE 0x00002000 /* NVM Type (1-SPI, 0-Microwire) */ #ifndef E1000_NVM_GRANT_ATTEMPTS -#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ +#define E1000_NVM_GRANT_ATTEMPTS 1000 /* NVM # attempts to gain grant */ #endif -#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ -#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ -#define E1000_EECD_SIZE_EX_SHIFT 11 -#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ -#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ -#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ -#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUTO_RD 0x00000200 /* NVM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* NVM Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ #define E1000_EECD_AUPDEN 0x00100000 /* Ena Auto FLASH update */ -#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ -#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ -#define E1000_EECD_SECVAL_SHIFT 22 -#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_EECD_SECVAL_SHIFT 22 +#define E1000_EECD_SEC1VAL_VALID_MASK (E1000_EECD_AUTO_RD | E1000_EECD_PRES) #define E1000_EECD_FLUPD_I210 0x00800000 /* Update FLASH */ #define E1000_EECD_FLUDONE_I210 0x04000000 /* Update FLASH done */ #define E1000_EECD_FLASH_DETECTED_I210 0x00080000 /* FLASH detected */ @@ -1379,22 +1379,22 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_I210_FIFO_SEL_BMC2OS_TX 0x06 #define E1000_I210_FIFO_SEL_BMC2OS_RX 0x01 -#define E1000_NVM_SWDPIN0 0x0001 /* SWDPIN 0 NVM Value */ -#define E1000_NVM_LED_LOGIC 0x0020 /* Led Logic Word */ -#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ -#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ -#define E1000_NVM_RW_REG_START 1 /* Start operation */ -#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ -#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ -#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ -#define E1000_FLASH_UPDATES 2000 +#define E1000_NVM_SWDPIN0 0x0001 /* SWDPIN 0 NVM Value */ +#define E1000_NVM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_NVM_RW_REG_DATA 16 /* Offset to data in NVM read/write regs */ +#define E1000_NVM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_NVM_RW_REG_START 1 /* Start operation */ +#define E1000_NVM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_NVM_POLL_READ 0 /* Flag for polling for read complete */ +#define E1000_FLASH_UPDATES 2000 /* NVM Word Offsets */ -#define NVM_COMPAT 0x0003 -#define NVM_ID_LED_SETTINGS 0x0004 -#define NVM_VERSION 0x0005 -#define NVM_SERDES_AMPLITUDE 0x0006 /* SERDES output amplitude */ -#define NVM_PHY_CLASS_WORD 0x0007 +#define NVM_COMPAT 0x0003 +#define NVM_ID_LED_SETTINGS 0x0004 +#define NVM_VERSION 0x0005 +#define NVM_SERDES_AMPLITUDE 0x0006 /* SERDES output amplitude */ +#define NVM_PHY_CLASS_WORD 0x0007 #define NVM_FUTURE_INIT_WORD1 0x0019 #define NVM_FUTURE_INIT_WORD2 0x001A #define NVM_ETRACK_WORD 0x0042 @@ -1423,29 +1423,29 @@ POSSIBILITY OF SUCH DAMAGE. #define NVM_COMPAT_VALID_CSUM 0x0001 #define NVM_FUTURE_INIT_WORD1_VALID_CSUM 0x0040 -#define NVM_INIT_CONTROL1_REG 0x000A -#define NVM_INIT_CONTROL2_REG 0x000F -#define NVM_SWDEF_PINS_CTRL_PORT_1 0x0010 -#define NVM_INIT_CONTROL3_PORT_B 0x0014 -#define NVM_INIT_3GIO_3 0x001A -#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 -#define NVM_INIT_CONTROL3_PORT_A 0x0024 -#define NVM_CFG 0x0012 -#define NVM_FLASH_VERSION 0x0032 -#define NVM_ALT_MAC_ADDR_PTR 0x0037 -#define NVM_CHECKSUM_REG 0x003F -#define NVM_COMPATIBILITY_REG_3 0x0003 -#define NVM_COMPATIBILITY_BIT_MASK 0x8000 - -#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ -#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ -#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ -#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ +#define NVM_INIT_CONTROL1_REG 0x000A +#define NVM_INIT_CONTROL2_REG 0x000F +#define NVM_SWDEF_PINS_CTRL_PORT_1 0x0010 +#define NVM_INIT_CONTROL3_PORT_B 0x0014 +#define NVM_INIT_3GIO_3 0x001A +#define NVM_SWDEF_PINS_CTRL_PORT_0 0x0020 +#define NVM_INIT_CONTROL3_PORT_A 0x0024 +#define NVM_CFG 0x0012 +#define NVM_FLASH_VERSION 0x0032 +#define NVM_ALT_MAC_ADDR_PTR 0x0037 +#define NVM_CHECKSUM_REG 0x003F +#define NVM_COMPATIBILITY_REG_3 0x0003 +#define NVM_COMPATIBILITY_BIT_MASK 0x8000 + +#define E1000_NVM_CFG_DONE_PORT_0 0x040000 /* MNG config cycle done */ +#define E1000_NVM_CFG_DONE_PORT_1 0x080000 /* ...for second port */ +#define E1000_NVM_CFG_DONE_PORT_2 0x100000 /* ...for third port */ +#define E1000_NVM_CFG_DONE_PORT_3 0x200000 /* ...for fourth port */ #define NVM_82580_LAN_FUNC_OFFSET(a) ((a) ? (0x40 + (0x40 * (a))) : 0) /* Mask bits for fields in Word 0x24 of the NVM */ -#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ +#define NVM_WORD24_COM_MDIO 0x0008 /* MDIO interface shared */ #define NVM_WORD24_EXT_MDIO 0x0004 /* MDIO accesses routed extrnl */ /* Offset of Link Mode bits for 82575/82576 */ #define NVM_WORD24_LNK_MODE_OFFSET 8 @@ -1454,140 +1454,140 @@ POSSIBILITY OF SUCH DAMAGE. /* Mask bits for fields in Word 0x0f of the NVM */ -#define NVM_WORD0F_PAUSE_MASK 0x3000 -#define NVM_WORD0F_PAUSE 0x1000 -#define NVM_WORD0F_ASM_DIR 0x2000 -#define NVM_WORD0F_ANE 0x0800 -#define NVM_WORD0F_SWPDIO_EXT_MASK 0x00F0 -#define NVM_WORD0F_LPLU 0x0001 +#define NVM_WORD0F_PAUSE_MASK 0x3000 +#define NVM_WORD0F_PAUSE 0x1000 +#define NVM_WORD0F_ASM_DIR 0x2000 +#define NVM_WORD0F_ANE 0x0800 +#define NVM_WORD0F_SWPDIO_EXT_MASK 0x00F0 +#define NVM_WORD0F_LPLU 0x0001 /* Mask bits for fields in Word 0x1a of the NVM */ -#define NVM_WORD1A_ASPM_MASK 0x000C +#define NVM_WORD1A_ASPM_MASK 0x000C /* Mask bits for fields in Word 0x03 of the EEPROM */ -#define NVM_COMPAT_LOM 0x0800 +#define NVM_COMPAT_LOM 0x0800 /* length of string needed to store PBA number */ -#define E1000_PBANUM_LENGTH 11 +#define E1000_PBANUM_LENGTH 11 /* For checksumming, the sum of all words in the NVM should equal 0xBABA. */ -#define NVM_SUM 0xBABA - -#define NVM_MAC_ADDR_OFFSET 0 -#define NVM_PBA_OFFSET_0 8 -#define NVM_PBA_OFFSET_1 9 -#define NVM_PBA_PTR_GUARD 0xFAFA -#define NVM_RESERVED_WORD 0xFFFF -#define NVM_PHY_CLASS_A 0x8000 -#define NVM_SERDES_AMPLITUDE_MASK 0x000F -#define NVM_SIZE_MASK 0x1C00 -#define NVM_SIZE_SHIFT 10 -#define NVM_WORD_SIZE_BASE_SHIFT 6 -#define NVM_SWDPIO_EXT_SHIFT 4 +#define NVM_SUM 0xBABA + +#define NVM_MAC_ADDR_OFFSET 0 +#define NVM_PBA_OFFSET_0 8 +#define NVM_PBA_OFFSET_1 9 +#define NVM_PBA_PTR_GUARD 0xFAFA +#define NVM_RESERVED_WORD 0xFFFF +#define NVM_PHY_CLASS_A 0x8000 +#define NVM_SERDES_AMPLITUDE_MASK 0x000F +#define NVM_SIZE_MASK 0x1C00 +#define NVM_SIZE_SHIFT 10 +#define NVM_WORD_SIZE_BASE_SHIFT 6 +#define NVM_SWDPIO_EXT_SHIFT 4 /* NVM Commands - Microwire */ -#define NVM_READ_OPCODE_MICROWIRE 0x6 /* NVM read opcode */ -#define NVM_WRITE_OPCODE_MICROWIRE 0x5 /* NVM write opcode */ -#define NVM_ERASE_OPCODE_MICROWIRE 0x7 /* NVM erase opcode */ -#define NVM_EWEN_OPCODE_MICROWIRE 0x13 /* NVM erase/write enable */ -#define NVM_EWDS_OPCODE_MICROWIRE 0x10 /* NVM erase/write disable */ +#define NVM_READ_OPCODE_MICROWIRE 0x6 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_MICROWIRE 0x5 /* NVM write opcode */ +#define NVM_ERASE_OPCODE_MICROWIRE 0x7 /* NVM erase opcode */ +#define NVM_EWEN_OPCODE_MICROWIRE 0x13 /* NVM erase/write enable */ +#define NVM_EWDS_OPCODE_MICROWIRE 0x10 /* NVM erase/write disable */ /* NVM Commands - SPI */ -#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ -#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ -#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ -#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ -#define NVM_WRDI_OPCODE_SPI 0x04 /* NVM reset Write Enable latch */ -#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ -#define NVM_WRSR_OPCODE_SPI 0x01 /* NVM write Status register */ +#define NVM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ +#define NVM_READ_OPCODE_SPI 0x03 /* NVM read opcode */ +#define NVM_WRITE_OPCODE_SPI 0x02 /* NVM write opcode */ +#define NVM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define NVM_WREN_OPCODE_SPI 0x06 /* NVM set Write Enable latch */ +#define NVM_WRDI_OPCODE_SPI 0x04 /* NVM reset Write Enable latch */ +#define NVM_RDSR_OPCODE_SPI 0x05 /* NVM read Status register */ +#define NVM_WRSR_OPCODE_SPI 0x01 /* NVM write Status register */ /* SPI NVM Status Register */ -#define NVM_STATUS_RDY_SPI 0x01 -#define NVM_STATUS_WEN_SPI 0x02 -#define NVM_STATUS_BP0_SPI 0x04 -#define NVM_STATUS_BP1_SPI 0x08 -#define NVM_STATUS_WPEN_SPI 0x80 +#define NVM_STATUS_RDY_SPI 0x01 +#define NVM_STATUS_WEN_SPI 0x02 +#define NVM_STATUS_BP0_SPI 0x04 +#define NVM_STATUS_BP1_SPI 0x08 +#define NVM_STATUS_WPEN_SPI 0x80 /* Word definitions for ID LED Settings */ -#define ID_LED_RESERVED_0000 0x0000 -#define ID_LED_RESERVED_FFFF 0xFFFF -#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ - (ID_LED_OFF1_OFF2 << 8) | \ - (ID_LED_DEF1_DEF2 << 4) | \ - (ID_LED_DEF1_DEF2)) -#define ID_LED_DEF1_DEF2 0x1 -#define ID_LED_DEF1_ON2 0x2 -#define ID_LED_DEF1_OFF2 0x3 -#define ID_LED_ON1_DEF2 0x4 -#define ID_LED_ON1_ON2 0x5 -#define ID_LED_ON1_OFF2 0x6 -#define ID_LED_OFF1_DEF2 0x7 -#define ID_LED_OFF1_ON2 0x8 -#define ID_LED_OFF1_OFF2 0x9 - -#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF -#define IGP_ACTIVITY_LED_ENABLE 0x0300 -#define IGP_LED3_MODE 0x07000000 +#define ID_LED_RESERVED_0000 0x0000 +#define ID_LED_RESERVED_FFFF 0xFFFF +#define ID_LED_DEFAULT ((ID_LED_OFF1_ON2 << 12) | \ + (ID_LED_OFF1_OFF2 << 8) | \ + (ID_LED_DEF1_DEF2 << 4) | \ + (ID_LED_DEF1_DEF2)) +#define ID_LED_DEF1_DEF2 0x1 +#define ID_LED_DEF1_ON2 0x2 +#define ID_LED_DEF1_OFF2 0x3 +#define ID_LED_ON1_DEF2 0x4 +#define ID_LED_ON1_ON2 0x5 +#define ID_LED_ON1_OFF2 0x6 +#define ID_LED_OFF1_DEF2 0x7 +#define ID_LED_OFF1_ON2 0x8 +#define ID_LED_OFF1_OFF2 0x9 + +#define IGP_ACTIVITY_LED_MASK 0xFFFFF0FF +#define IGP_ACTIVITY_LED_ENABLE 0x0300 +#define IGP_LED3_MODE 0x07000000 /* PCI/PCI-X/PCI-EX Config space */ -#define PCIX_COMMAND_REGISTER 0xE6 -#define PCIX_STATUS_REGISTER_LO 0xE8 -#define PCIX_STATUS_REGISTER_HI 0xEA -#define PCI_HEADER_TYPE_REGISTER 0x0E -#define PCIE_LINK_STATUS 0x12 -#define PCIE_DEVICE_CONTROL2 0x28 - -#define PCIX_COMMAND_MMRBC_MASK 0x000C -#define PCIX_COMMAND_MMRBC_SHIFT 0x2 -#define PCIX_STATUS_HI_MMRBC_MASK 0x0060 -#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5 -#define PCIX_STATUS_HI_MMRBC_4K 0x3 -#define PCIX_STATUS_HI_MMRBC_2K 0x2 -#define PCIX_STATUS_LO_FUNC_MASK 0x7 -#define PCI_HEADER_TYPE_MULTIFUNC 0x80 -#define PCIE_LINK_WIDTH_MASK 0x3F0 -#define PCIE_LINK_WIDTH_SHIFT 4 -#define PCIE_LINK_SPEED_MASK 0x0F -#define PCIE_LINK_SPEED_2500 0x01 -#define PCIE_LINK_SPEED_5000 0x02 -#define PCIE_DEVICE_CONTROL2_16ms 0x0005 - - -#define PHY_REVISION_MASK 0xFFFFFFF0 -#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ -#define MAX_PHY_MULTI_PAGE_REG 0xF +#define PCIX_COMMAND_REGISTER 0xE6 +#define PCIX_STATUS_REGISTER_LO 0xE8 +#define PCIX_STATUS_REGISTER_HI 0xEA +#define PCI_HEADER_TYPE_REGISTER 0x0E +#define PCIE_LINK_STATUS 0x12 +#define PCIE_DEVICE_CONTROL2 0x28 + +#define PCIX_COMMAND_MMRBC_MASK 0x000C +#define PCIX_COMMAND_MMRBC_SHIFT 0x2 +#define PCIX_STATUS_HI_MMRBC_MASK 0x0060 +#define PCIX_STATUS_HI_MMRBC_SHIFT 0x5 +#define PCIX_STATUS_HI_MMRBC_4K 0x3 +#define PCIX_STATUS_HI_MMRBC_2K 0x2 +#define PCIX_STATUS_LO_FUNC_MASK 0x7 +#define PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define PCIE_LINK_WIDTH_MASK 0x3F0 +#define PCIE_LINK_WIDTH_SHIFT 4 +#define PCIE_LINK_SPEED_MASK 0x0F +#define PCIE_LINK_SPEED_2500 0x01 +#define PCIE_LINK_SPEED_5000 0x02 +#define PCIE_DEVICE_CONTROL2_16ms 0x0005 + + +#define PHY_REVISION_MASK 0xFFFFFFF0 +#define MAX_PHY_REG_ADDRESS 0x1F /* 5 bit address bus (0-0x1F) */ +#define MAX_PHY_MULTI_PAGE_REG 0xF /* Bit definitions for valid PHY IDs. */ /* * I = Integrated * E = External */ -#define M88E1000_E_PHY_ID 0x01410C50 -#define M88E1000_I_PHY_ID 0x01410C30 -#define M88E1011_I_PHY_ID 0x01410C20 -#define IGP01E1000_I_PHY_ID 0x02A80380 -#define M88E1011_I_REV_4 0x04 -#define M88E1111_I_PHY_ID 0x01410CC0 -#define M88E1112_E_PHY_ID 0x01410C90 -#define I347AT4_E_PHY_ID 0x01410DC0 -#define M88E1340M_E_PHY_ID 0x01410DF0 -#define GG82563_E_PHY_ID 0x01410CA0 -#define IGP03E1000_E_PHY_ID 0x02A80390 -#define IFE_E_PHY_ID 0x02A80330 -#define IFE_PLUS_E_PHY_ID 0x02A80320 -#define IFE_C_E_PHY_ID 0x02A80310 +#define M88E1000_E_PHY_ID 0x01410C50 +#define M88E1000_I_PHY_ID 0x01410C30 +#define M88E1011_I_PHY_ID 0x01410C20 +#define IGP01E1000_I_PHY_ID 0x02A80380 +#define M88E1011_I_REV_4 0x04 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define M88E1112_E_PHY_ID 0x01410C90 +#define I347AT4_E_PHY_ID 0x01410DC0 +#define M88E1340M_E_PHY_ID 0x01410DF0 +#define GG82563_E_PHY_ID 0x01410CA0 +#define IGP03E1000_E_PHY_ID 0x02A80390 +#define IFE_E_PHY_ID 0x02A80330 +#define IFE_PLUS_E_PHY_ID 0x02A80320 +#define IFE_C_E_PHY_ID 0x02A80310 #define BME1000_E_PHY_ID 0x01410CB0 #define BME1000_E_PHY_ID_R2 0x01410CB1 #define I82577_E_PHY_ID 0x01540050 #define I82578_E_PHY_ID 0x004DD040 #define I82579_E_PHY_ID 0x01540090 #define I217_E_PHY_ID 0x015400A0 -#define I82580_I_PHY_ID 0x015403A0 -#define I350_I_PHY_ID 0x015403B0 +#define I82580_I_PHY_ID 0x015403A0 +#define I350_I_PHY_ID 0x015403B0 #define I210_I_PHY_ID 0x01410C00 -#define IGP04E1000_E_PHY_ID 0x02A80391 -#define M88_VENDOR 0x0141 +#define IGP04E1000_E_PHY_ID 0x02A80391 +#define M88_VENDOR 0x0141 /* M88E1000 Specific Registers */ #define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Reg */ @@ -1595,43 +1595,43 @@ POSSIBILITY OF SUCH DAMAGE. #define M88E1000_INT_ENABLE 0x12 /* Interrupt Enable Reg */ #define M88E1000_INT_STATUS 0x13 /* Interrupt Status Reg */ #define M88E1000_EXT_PHY_SPEC_CTRL 0x14 /* Extended PHY Specific Cntrl */ -#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ +#define M88E1000_RX_ERR_CNTR 0x15 /* Receive Error Counter */ -#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ +#define M88E1000_PHY_EXT_CTRL 0x1A /* PHY extend control register */ #define M88E1000_PHY_PAGE_SELECT 0x1D /* Reg 29 for pg number setting */ #define M88E1000_PHY_GEN_CONTROL 0x1E /* meaning depends on reg 29 */ -#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ -#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ +#define M88E1000_PHY_VCO_REG_BIT8 0x100 /* Bits 8 & 11 are adjusted for */ +#define M88E1000_PHY_VCO_REG_BIT11 0x800 /* improved BER performance */ /* M88E1000 PHY Specific Control Register */ -#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ -#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ -#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ +#define M88E1000_PSCR_JABBER_DISABLE 0x0001 /* 1=Jabber Function disabled */ +#define M88E1000_PSCR_POLARITY_REVERSAL 0x0002 /* 1=Polarity Reverse enabled */ +#define M88E1000_PSCR_SQE_TEST 0x0004 /* 1=SQE Test enabled */ /* 1=CLK125 low, 0=CLK125 toggling */ -#define M88E1000_PSCR_CLK125_DISABLE 0x0010 +#define M88E1000_PSCR_CLK125_DISABLE 0x0010 /* MDI Crossover Mode bits 6:5 Manual MDI configuration */ #define M88E1000_PSCR_MDI_MANUAL_MODE 0x0000 -#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ +#define M88E1000_PSCR_MDIX_MANUAL_MODE 0x0020 /* Manual MDIX configuration */ /* 1000BASE-T: Auto crossover, 100BASE-TX/10BASE-T: MDI Mode */ -#define M88E1000_PSCR_AUTO_X_1000T 0x0040 +#define M88E1000_PSCR_AUTO_X_1000T 0x0040 /* Auto crossover enabled all speeds */ -#define M88E1000_PSCR_AUTO_X_MODE 0x0060 +#define M88E1000_PSCR_AUTO_X_MODE 0x0060 /* * 1=Enable Extended 10BASE-T distance (Lower 10BASE-T Rx Threshold * 0=Normal 10BASE-T Rx Threshold */ -#define M88E1000_PSCR_EN_10BT_EXT_DIST 0x0080 +#define M88E1000_PSCR_EN_10BT_EXT_DIST 0x0080 /* 1=5-bit interface in 100BASE-TX, 0=MII interface in 100BASE-TX */ -#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 -#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ -#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ -#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ +#define M88E1000_PSCR_MII_5BIT_ENABLE 0x0100 +#define M88E1000_PSCR_SCRAMBLER_DISABLE 0x0200 /* 1=Scrambler disable */ +#define M88E1000_PSCR_FORCE_LINK_GOOD 0x0400 /* 1=Force link good */ +#define M88E1000_PSCR_ASSERT_CRS_ON_TX 0x0800 /* 1=Assert CRS on Tx */ /* M88E1000 PHY Specific Status Register */ -#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ -#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ -#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ -#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ +#define M88E1000_PSSR_JABBER 0x0001 /* 1=Jabber */ +#define M88E1000_PSSR_REV_POLARITY 0x0002 /* 1=Polarity reversed */ +#define M88E1000_PSSR_DOWNSHIFT 0x0020 /* 1=Downshifted */ +#define M88E1000_PSSR_MDIX 0x0040 /* 1=MDIX; 0=MDI */ /* * 0 = <50M * 1 = 50-80M @@ -1639,61 +1639,61 @@ POSSIBILITY OF SUCH DAMAGE. * 3 = 110-140M * 4 = >140M */ -#define M88E1000_PSSR_CABLE_LENGTH 0x0380 -#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ -#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ -#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ -#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ -#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ -#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ -#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ -#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ - -#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 +#define M88E1000_PSSR_CABLE_LENGTH 0x0380 +#define M88E1000_PSSR_LINK 0x0400 /* 1=Link up, 0=Link down */ +#define M88E1000_PSSR_SPD_DPLX_RESOLVED 0x0800 /* 1=Speed & Duplex resolved */ +#define M88E1000_PSSR_PAGE_RCVD 0x1000 /* 1=Page received */ +#define M88E1000_PSSR_DPLX 0x2000 /* 1=Duplex 0=Half Duplex */ +#define M88E1000_PSSR_SPEED 0xC000 /* Speed, bits 14:15 */ +#define M88E1000_PSSR_10MBS 0x0000 /* 00=10Mbs */ +#define M88E1000_PSSR_100MBS 0x4000 /* 01=100Mbs */ +#define M88E1000_PSSR_1000MBS 0x8000 /* 10=1000Mbs */ + +#define M88E1000_PSSR_CABLE_LENGTH_SHIFT 7 /* M88E1000 Extended PHY Specific Control Register */ -#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ +#define M88E1000_EPSCR_FIBER_LOOPBACK 0x4000 /* 1=Fiber loopback */ /* * 1 = Lost lock detect enabled. * Will assert lost lock and bring * link down if idle not seen * within 1ms in 1000BASE-T */ -#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 +#define M88E1000_EPSCR_DOWN_NO_IDLE 0x8000 /* * Number of times we will attempt to autonegotiate before downshifting if we * are the master */ -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400 -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800 -#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK 0x0C00 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_1X 0x0000 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_2X 0x0400 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_3X 0x0800 +#define M88E1000_EPSCR_MASTER_DOWNSHIFT_4X 0x0C00 /* * Number of times we will attempt to autonegotiate before downshifting if we * are the slave */ -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000 -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 -#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 -#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ -#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK 0x0300 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_DIS 0x0000 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X 0x0100 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_2X 0x0200 +#define M88E1000_EPSCR_SLAVE_DOWNSHIFT_3X 0x0300 +#define M88E1000_EPSCR_TX_CLK_2_5 0x0060 /* 2.5 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_25 0x0070 /* 25 MHz TX_CLK */ +#define M88E1000_EPSCR_TX_CLK_0 0x0000 /* NO TX_CLK */ /* M88E1111 Specific Registers */ -#define M88E1111_PHY_PAGE_SELECT1 0x16 /* for registers 0-28 */ -#define M88E1111_PHY_PAGE_SELECT2 0x1D /* for registers 30-31 */ +#define M88E1111_PHY_PAGE_SELECT1 0x16 /* for registers 0-28 */ +#define M88E1111_PHY_PAGE_SELECT2 0x1D /* for registers 30-31 */ /* M88E1111 page select register mask */ -#define M88E1111_PHY_PAGE_SELECT_MASK1 0xFF -#define M88E1111_PHY_PAGE_SELECT_MASK2 0x3F +#define M88E1111_PHY_PAGE_SELECT_MASK1 0xFF +#define M88E1111_PHY_PAGE_SELECT_MASK2 0x3F /* Intel I347AT4 Registers */ -#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ -#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ -#define I347AT4_PAGE_SELECT 0x16 +#define I347AT4_PCDL 0x10 /* PHY Cable Diagnostics Length */ +#define I347AT4_PCDC 0x15 /* PHY Cable Diagnostics Control */ +#define I347AT4_PAGE_SELECT 0x16 /* I347AT4 Extended PHY Specific Control Register */ @@ -1701,33 +1701,33 @@ POSSIBILITY OF SUCH DAMAGE. * Number of times we will attempt to autonegotiate before downshifting if we * are the master */ -#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 -#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 -#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 -#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 -#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 -#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 -#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 -#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 -#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 -#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_ENABLE 0x0800 +#define I347AT4_PSCR_DOWNSHIFT_MASK 0x7000 +#define I347AT4_PSCR_DOWNSHIFT_1X 0x0000 +#define I347AT4_PSCR_DOWNSHIFT_2X 0x1000 +#define I347AT4_PSCR_DOWNSHIFT_3X 0x2000 +#define I347AT4_PSCR_DOWNSHIFT_4X 0x3000 +#define I347AT4_PSCR_DOWNSHIFT_5X 0x4000 +#define I347AT4_PSCR_DOWNSHIFT_6X 0x5000 +#define I347AT4_PSCR_DOWNSHIFT_7X 0x6000 +#define I347AT4_PSCR_DOWNSHIFT_8X 0x7000 /* I347AT4 PHY Cable Diagnostics Control */ -#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ +#define I347AT4_PCDC_CABLE_LENGTH_UNIT 0x0400 /* 0=cm 1=meters */ /* M88E1112 only registers */ -#define M88E1112_VCT_DSP_DISTANCE 0x001A +#define M88E1112_VCT_DSP_DISTANCE 0x001A /* M88EC018 Rev 2 specific DownShift settings */ -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00 -#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_MASK 0x0E00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_1X 0x0000 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_2X 0x0200 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_3X 0x0400 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_4X 0x0600 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_5X 0x0800 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_6X 0x0A00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_7X 0x0C00 +#define M88EC018_EPSCR_DOWNSHIFT_COUNTER_8X 0x0E00 #define I82578_EPSCR_DOWNSHIFT_ENABLE 0x0020 #define I82578_EPSCR_DOWNSHIFT_COUNTER_MASK 0x001C @@ -1740,10 +1740,10 @@ POSSIBILITY OF SUCH DAMAGE. * 15-5: page * 4-0: register offset */ -#define GG82563_PAGE_SHIFT 5 -#define GG82563_REG(page, reg) \ - (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) -#define GG82563_MIN_ALT_REG 30 +#define GG82563_PAGE_SHIFT 5 +#define GG82563_REG(page, reg) \ + (((page) << GG82563_PAGE_SHIFT) | ((reg) & MAX_PHY_REG_ADDRESS)) +#define GG82563_MIN_ALT_REG 30 /* GG82563 Specific Registers */ #define GG82563_PHY_SPEC_CTRL GG82563_REG(0, 16) /* PHY Spec Cntrl */ @@ -1789,51 +1789,51 @@ POSSIBILITY OF SUCH DAMAGE. #define GG82563_PHY_KMRN_MISC GG82563_REG(194, 26) /* Misc. */ /* MDI Control */ -#define E1000_MDIC_DATA_MASK 0x0000FFFF -#define E1000_MDIC_REG_MASK 0x001F0000 -#define E1000_MDIC_REG_SHIFT 16 -#define E1000_MDIC_PHY_MASK 0x03E00000 -#define E1000_MDIC_PHY_SHIFT 21 -#define E1000_MDIC_OP_WRITE 0x04000000 -#define E1000_MDIC_OP_READ 0x08000000 -#define E1000_MDIC_READY 0x10000000 -#define E1000_MDIC_INT_EN 0x20000000 -#define E1000_MDIC_ERROR 0x40000000 -#define E1000_MDIC_DEST 0x80000000 +#define E1000_MDIC_DATA_MASK 0x0000FFFF +#define E1000_MDIC_REG_MASK 0x001F0000 +#define E1000_MDIC_REG_SHIFT 16 +#define E1000_MDIC_PHY_MASK 0x03E00000 +#define E1000_MDIC_PHY_SHIFT 21 +#define E1000_MDIC_OP_WRITE 0x04000000 +#define E1000_MDIC_OP_READ 0x08000000 +#define E1000_MDIC_READY 0x10000000 +#define E1000_MDIC_INT_EN 0x20000000 +#define E1000_MDIC_ERROR 0x40000000 +#define E1000_MDIC_DEST 0x80000000 /* SerDes Control */ -#define E1000_GEN_CTL_READY 0x80000000 -#define E1000_GEN_CTL_ADDRESS_SHIFT 8 -#define E1000_GEN_POLL_TIMEOUT 640 +#define E1000_GEN_CTL_READY 0x80000000 +#define E1000_GEN_CTL_ADDRESS_SHIFT 8 +#define E1000_GEN_POLL_TIMEOUT 640 /* LinkSec register fields */ -#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 -#define E1000_LSECTXCAP_SUM_SHIFT 16 -#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 -#define E1000_LSECRXCAP_SUM_SHIFT 16 - -#define E1000_LSECTXCTRL_EN_MASK 0x00000003 -#define E1000_LSECTXCTRL_DISABLE 0x0 -#define E1000_LSECTXCTRL_AUTH 0x1 -#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 -#define E1000_LSECTXCTRL_AISCI 0x00000020 -#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 -#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 - -#define E1000_LSECRXCTRL_EN_MASK 0x0000000C -#define E1000_LSECRXCTRL_EN_SHIFT 2 -#define E1000_LSECRXCTRL_DISABLE 0x0 -#define E1000_LSECRXCTRL_CHECK 0x1 -#define E1000_LSECRXCTRL_STRICT 0x2 -#define E1000_LSECRXCTRL_DROP 0x3 -#define E1000_LSECRXCTRL_PLSH 0x00000040 -#define E1000_LSECRXCTRL_RP 0x00000080 -#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 +#define E1000_LSECTXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECTXCAP_SUM_SHIFT 16 +#define E1000_LSECRXCAP_SUM_MASK 0x00FF0000 +#define E1000_LSECRXCAP_SUM_SHIFT 16 + +#define E1000_LSECTXCTRL_EN_MASK 0x00000003 +#define E1000_LSECTXCTRL_DISABLE 0x0 +#define E1000_LSECTXCTRL_AUTH 0x1 +#define E1000_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define E1000_LSECTXCTRL_AISCI 0x00000020 +#define E1000_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define E1000_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define E1000_LSECRXCTRL_EN_MASK 0x0000000C +#define E1000_LSECRXCTRL_EN_SHIFT 2 +#define E1000_LSECRXCTRL_DISABLE 0x0 +#define E1000_LSECRXCTRL_CHECK 0x1 +#define E1000_LSECRXCTRL_STRICT 0x2 +#define E1000_LSECRXCTRL_DROP 0x3 +#define E1000_LSECRXCTRL_PLSH 0x00000040 +#define E1000_LSECRXCTRL_RP 0x00000080 +#define E1000_LSECRXCTRL_RSV_MASK 0xFFFFFF33 /* Tx Rate-Scheduler Config fields */ #define E1000_RTTBCNRC_RS_ENA 0x80000000 #define E1000_RTTBCNRC_RF_DEC_MASK 0x00003FFF -#define E1000_RTTBCNRC_RF_INT_SHIFT 14 +#define E1000_RTTBCNRC_RF_INT_SHIFT 14 #define E1000_RTTBCNRC_RF_INT_MASK \ (E1000_RTTBCNRC_RF_DEC_MASK << E1000_RTTBCNRC_RF_INT_SHIFT) @@ -1842,18 +1842,18 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_DMACR_DMACWT_MASK 0x00003FFF /* DMA Coalescing Rx Threshold */ #define E1000_DMACR_DMACTHR_MASK 0x00FF0000 -#define E1000_DMACR_DMACTHR_SHIFT 16 +#define E1000_DMACR_DMACTHR_SHIFT 16 /* Lx when no PCIe transactions */ #define E1000_DMACR_DMAC_LX_MASK 0x30000000 -#define E1000_DMACR_DMAC_LX_SHIFT 28 -#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ +#define E1000_DMACR_DMAC_LX_SHIFT 28 +#define E1000_DMACR_DMAC_EN 0x80000000 /* Enable DMA Coalescing */ /* DMA Coalescing BMC-to-OS Watchdog Enable */ #define E1000_DMACR_DC_BMC2OSW_EN 0x00008000 /* DMA Coalescing Transmit Threshold */ #define E1000_DMCTXTH_DMCTTHR_MASK 0x00000FFF -#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ +#define E1000_DMCTLX_TTLX_MASK 0x00000FFF /* Time to LX request */ /* Rx Traffic Rate Threshold */ #define E1000_DMCRTRH_UTRESH_MASK 0x0007FFFF @@ -1865,7 +1865,7 @@ POSSIBILITY OF SUCH DAMAGE. /* Flow ctrl Rx Threshold High val */ #define E1000_FCRTC_RTH_COAL_MASK 0x0003FFF0 -#define E1000_FCRTC_RTH_COAL_SHIFT 4 +#define E1000_FCRTC_RTH_COAL_SHIFT 4 /* Lx power decision based on DMA coal */ #define E1000_PCIEMISC_LX_DECISION 0x00000080 @@ -1874,17 +1874,17 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_TXPB0S_SIZE_I210_MASK 0x0000003F /* Tx packet buffer 0 size */ /* Proxy Filter Control */ -#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ -#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ +#define E1000_PROXYFC_D0 0x00000001 /* Enable offload in D0 */ +#define E1000_PROXYFC_EX 0x00000004 /* Directed exact proxy */ #define E1000_PROXYFC_MC 0x00000008 /* Directed MC Proxy */ -#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ +#define E1000_PROXYFC_BC 0x00000010 /* Broadcast Proxy Enable */ #define E1000_PROXYFC_ARP_DIRECTED 0x00000020 /* Directed ARP Proxy Ena */ -#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ -#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ +#define E1000_PROXYFC_IPV4 0x00000040 /* Directed IPv4 Enable */ +#define E1000_PROXYFC_IPV6 0x00000080 /* Directed IPv6 Enable */ #define E1000_PROXYFC_NS 0x00000200 /* IPv4 NBRHD Solicitation */ #define E1000_PROXYFC_ARP 0x00000800 /* ARP Request Proxy Ena */ /* Proxy Status */ -#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ +#define E1000_PROXYS_CLEAR 0xFFFFFFFF /* Clear */ /* Firmware Status */ #define E1000_FWSTS_FWRI 0x80000000 /* FW Reset Indication */ diff --git a/lib/librte_pmd_e1000/e1000/e1000_hw.h b/lib/librte_pmd_e1000/e1000/e1000_hw.h index 64e7dc25ae..9cfa9e7886 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_hw.h +++ b/lib/librte_pmd_e1000/e1000/e1000_hw.h @@ -129,32 +129,32 @@ struct e1000_hw; #define E1000_DEV_ID_PCH_D_HV_DC 0x10F0 #define E1000_DEV_ID_PCH2_LV_LM 0x1502 #define E1000_DEV_ID_PCH2_LV_V 0x1503 -#define E1000_DEV_ID_82576 0x10C9 -#define E1000_DEV_ID_82576_FIBER 0x10E6 -#define E1000_DEV_ID_82576_SERDES 0x10E7 -#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 -#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 -#define E1000_DEV_ID_82576_NS 0x150A -#define E1000_DEV_ID_82576_NS_SERDES 0x1518 -#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D -#define E1000_DEV_ID_82576_VF 0x10CA +#define E1000_DEV_ID_82576 0x10C9 +#define E1000_DEV_ID_82576_FIBER 0x10E6 +#define E1000_DEV_ID_82576_SERDES 0x10E7 +#define E1000_DEV_ID_82576_QUAD_COPPER 0x10E8 +#define E1000_DEV_ID_82576_QUAD_COPPER_ET2 0x1526 +#define E1000_DEV_ID_82576_NS 0x150A +#define E1000_DEV_ID_82576_NS_SERDES 0x1518 +#define E1000_DEV_ID_82576_SERDES_QUAD 0x150D +#define E1000_DEV_ID_82576_VF 0x10CA #define E1000_DEV_ID_82576_VF_HV 0x152D -#define E1000_DEV_ID_I350_VF 0x1520 +#define E1000_DEV_ID_I350_VF 0x1520 #define E1000_DEV_ID_I350_VF_HV 0x152F -#define E1000_DEV_ID_82575EB_COPPER 0x10A7 -#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 -#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 -#define E1000_DEV_ID_82580_COPPER 0x150E -#define E1000_DEV_ID_82580_FIBER 0x150F -#define E1000_DEV_ID_82580_SERDES 0x1510 -#define E1000_DEV_ID_82580_SGMII 0x1511 -#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 -#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 -#define E1000_DEV_ID_I350_COPPER 0x1521 -#define E1000_DEV_ID_I350_FIBER 0x1522 -#define E1000_DEV_ID_I350_SERDES 0x1523 -#define E1000_DEV_ID_I350_SGMII 0x1524 -#define E1000_DEV_ID_I350_DA4 0x1546 +#define E1000_DEV_ID_82575EB_COPPER 0x10A7 +#define E1000_DEV_ID_82575EB_FIBER_SERDES 0x10A9 +#define E1000_DEV_ID_82575GB_QUAD_COPPER 0x10D6 +#define E1000_DEV_ID_82580_COPPER 0x150E +#define E1000_DEV_ID_82580_FIBER 0x150F +#define E1000_DEV_ID_82580_SERDES 0x1510 +#define E1000_DEV_ID_82580_SGMII 0x1511 +#define E1000_DEV_ID_82580_COPPER_DUAL 0x1516 +#define E1000_DEV_ID_82580_QUAD_FIBER 0x1527 +#define E1000_DEV_ID_I350_COPPER 0x1521 +#define E1000_DEV_ID_I350_FIBER 0x1522 +#define E1000_DEV_ID_I350_SERDES 0x1523 +#define E1000_DEV_ID_I350_SGMII 0x1524 +#define E1000_DEV_ID_I350_DA4 0x1546 #define E1000_DEV_ID_I210_COPPER 0x1533 #define E1000_DEV_ID_I210_COPPER_OEM1 0x1534 #define E1000_DEV_ID_I210_COPPER_IT 0x1535 @@ -162,25 +162,25 @@ struct e1000_hw; #define E1000_DEV_ID_I210_SERDES 0x1537 #define E1000_DEV_ID_I210_SGMII 0x1538 #define E1000_DEV_ID_I211_COPPER 0x1539 -#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 -#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A -#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C -#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 -#define E1000_REVISION_0 0 -#define E1000_REVISION_1 1 -#define E1000_REVISION_2 2 -#define E1000_REVISION_3 3 -#define E1000_REVISION_4 4 - -#define E1000_FUNC_0 0 -#define E1000_FUNC_1 1 -#define E1000_FUNC_2 2 -#define E1000_FUNC_3 3 - -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 -#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 +#define E1000_DEV_ID_DH89XXCC_SGMII 0x0438 +#define E1000_DEV_ID_DH89XXCC_SERDES 0x043A +#define E1000_DEV_ID_DH89XXCC_BACKPLANE 0x043C +#define E1000_DEV_ID_DH89XXCC_SFP 0x0440 +#define E1000_REVISION_0 0 +#define E1000_REVISION_1 1 +#define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 +#define E1000_REVISION_4 4 + +#define E1000_FUNC_0 0 +#define E1000_FUNC_1 1 +#define E1000_FUNC_2 2 +#define E1000_FUNC_3 3 + +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN0 0 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN1 3 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN2 6 +#define E1000_ALT_MAC_ADDRESS_OFFSET_LAN3 9 enum e1000_mac_type { e1000_undefined = 0, @@ -353,9 +353,9 @@ enum e1000_serdes_link_state { struct e1000_rx_desc { __le64 buffer_addr; /* Address of the descriptor's data buffer */ __le16 length; /* Length of data DMAed into data buffer */ - __le16 csum; /* Packet checksum */ - u8 status; /* Descriptor status */ - u8 errors; /* Descriptor Errors */ + __le16 csum; /* Packet checksum */ + u8 status; /* Descriptor status */ + u8 errors; /* Descriptor Errors */ __le16 special; }; @@ -367,9 +367,9 @@ union e1000_rx_desc_extended { } read; struct { struct { - __le32 mrq; /* Multiple Rx Queues */ + __le32 mrq; /* Multiple Rx Queues */ union { - __le32 rss; /* RSS Hash */ + __le32 rss; /* RSS Hash */ struct { __le16 ip_id; /* IP id */ __le16 csum; /* Packet Checksum */ @@ -379,7 +379,7 @@ union e1000_rx_desc_extended { struct { __le32 status_error; /* ext status/error */ __le16 length; - __le16 vlan; /* VLAN tag */ + __le16 vlan; /* VLAN tag */ } upper; } wb; /* writeback */ }; @@ -393,9 +393,9 @@ union e1000_rx_desc_packet_split { } read; struct { struct { - __le32 mrq; /* Multiple Rx Queues */ + __le32 mrq; /* Multiple Rx Queues */ union { - __le32 rss; /* RSS Hash */ + __le32 rss; /* RSS Hash */ struct { __le16 ip_id; /* IP id */ __le16 csum; /* Packet Checksum */ @@ -404,8 +404,8 @@ union e1000_rx_desc_packet_split { } lower; struct { __le32 status_error; /* ext status/error */ - __le16 length0; /* length of buffer 0 */ - __le16 vlan; /* VLAN tag */ + __le16 length0; /* length of buffer 0 */ + __le16 vlan; /* VLAN tag */ } middle; struct { __le16 header_status; @@ -421,16 +421,16 @@ struct e1000_tx_desc { union { __le32 data; struct { - __le16 length; /* Data buffer length */ - u8 cso; /* Checksum offset */ - u8 cmd; /* Descriptor control */ + __le16 length; /* Data buffer length */ + u8 cso; /* Checksum offset */ + u8 cmd; /* Descriptor control */ } flags; } lower; union { __le32 data; struct { - u8 status; /* Descriptor status */ - u8 css; /* Checksum start */ + u8 status; /* Descriptor status */ + u8 css; /* Checksum start */ __le16 special; } fields; } upper; @@ -441,37 +441,37 @@ struct e1000_context_desc { union { __le32 ip_config; struct { - u8 ipcss; /* IP checksum start */ - u8 ipcso; /* IP checksum offset */ - __le16 ipcse; /* IP checksum end */ + u8 ipcss; /* IP checksum start */ + u8 ipcso; /* IP checksum offset */ + __le16 ipcse; /* IP checksum end */ } ip_fields; } lower_setup; union { __le32 tcp_config; struct { - u8 tucss; /* TCP checksum start */ - u8 tucso; /* TCP checksum offset */ - __le16 tucse; /* TCP checksum end */ + u8 tucss; /* TCP checksum start */ + u8 tucso; /* TCP checksum offset */ + __le16 tucse; /* TCP checksum end */ } tcp_fields; } upper_setup; __le32 cmd_and_length; union { __le32 data; struct { - u8 status; /* Descriptor status */ - u8 hdr_len; /* Header length */ - __le16 mss; /* Maximum segment size */ + u8 status; /* Descriptor status */ + u8 hdr_len; /* Header length */ + __le16 mss; /* Maximum segment size */ } fields; } tcp_seg_setup; }; /* Offload data descriptor */ struct e1000_data_desc { - __le64 buffer_addr; /* Address of the descriptor's buffer address */ + __le64 buffer_addr; /* Address of the descriptor's buffer address */ union { __le32 data; struct { - __le16 length; /* Data buffer length */ + __le16 length; /* Data buffer length */ u8 typ_len_ext; u8 cmd; } flags; @@ -479,8 +479,8 @@ struct e1000_data_desc { union { __le32 data; struct { - u8 status; /* Descriptor status */ - u8 popts; /* Packet Options */ + u8 status; /* Descriptor status */ + u8 popts; /* Packet Options */ __le16 special; } fields; } upper; @@ -626,7 +626,7 @@ struct e1000_host_command_header { u8 checksum; }; -#define E1000_HI_MAX_DATA_LENGTH 252 +#define E1000_HI_MAX_DATA_LENGTH 252 struct e1000_host_command_info { struct e1000_host_command_header command_header; u8 command_data[E1000_HI_MAX_DATA_LENGTH]; @@ -641,7 +641,7 @@ struct e1000_host_mng_command_header { u16 command_length; }; -#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 struct e1000_host_mng_command_info { struct e1000_host_mng_command_header command_header; u8 command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; @@ -683,7 +683,7 @@ struct e1000_mac_operations { s32 (*validate_mdi_setting)(struct e1000_hw *); s32 (*mng_host_if_write)(struct e1000_hw *, u8*, u16, u16, u8*); s32 (*mng_write_cmd_header)(struct e1000_hw *hw, - struct e1000_host_mng_command_header*); + struct e1000_host_mng_command_header*); s32 (*mng_enable_host_if)(struct e1000_hw *); s32 (*wait_autoneg)(struct e1000_hw *); s32 (*acquire_swfw_sync)(struct e1000_hw *, u16); @@ -847,14 +847,14 @@ struct e1000_bus_info { }; struct e1000_fc_info { - u32 high_water; /* Flow control high-water mark */ - u32 low_water; /* Flow control low-water mark */ - u16 pause_time; /* Flow control pause timer */ - u16 refresh_time; /* Flow control refresh timer */ - bool send_xon; /* Flow control send XON */ - bool strict_ieee; /* Strict IEEE mode */ - enum e1000_fc_mode current_mode; /* FC mode in effect */ - enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ + u32 high_water; /* Flow control high-water mark */ + u32 low_water; /* Flow control low-water mark */ + u16 pause_time; /* Flow control pause timer */ + u16 refresh_time; /* Flow control refresh timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + enum e1000_fc_mode current_mode; /* FC mode in effect */ + enum e1000_fc_mode requested_mode; /* FC mode requested by caller */ }; struct e1000_mbx_operations { diff --git a/lib/librte_pmd_e1000/e1000/e1000_mac.c b/lib/librte_pmd_e1000/e1000/e1000_mac.c index 4ec7fa1b57..429e31904f 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_mac.c +++ b/lib/librte_pmd_e1000/e1000/e1000_mac.c @@ -178,8 +178,8 @@ s32 e1000_get_bus_info_pci_generic(struct e1000_hw *hw) /* Bus speed */ if (bus->type == e1000_bus_type_pci) { bus->speed = (status & E1000_STATUS_PCI66) - ? e1000_bus_speed_66 - : e1000_bus_speed_33; + ? e1000_bus_speed_66 + : e1000_bus_speed_33; } else { switch (status & E1000_STATUS_PCIX_SPEED) { case E1000_STATUS_PCIX_SPEED_66: @@ -199,8 +199,8 @@ s32 e1000_get_bus_info_pci_generic(struct e1000_hw *hw) /* Bus width */ bus->width = (status & E1000_STATUS_BUS64) - ? e1000_bus_width_64 - : e1000_bus_width_32; + ? e1000_bus_width_64 + : e1000_bus_width_32; /* Which PCI(-X) function? */ mac->ops.set_lan_id(hw); @@ -228,7 +228,7 @@ s32 e1000_get_bus_info_pcie_generic(struct e1000_hw *hw) bus->type = e1000_bus_type_pci_express; ret_val = e1000_read_pcie_cap_reg(hw, PCIE_LINK_STATUS, - &pcie_link_status); + &pcie_link_status); if (ret_val) { bus->width = e1000_bus_width_unknown; bus->speed = e1000_bus_speed_unknown; @@ -291,7 +291,7 @@ void e1000_set_lan_id_multi_port_pci(struct e1000_hw *hw) if (pci_header_type & PCI_HEADER_TYPE_MULTIFUNC) { status = E1000_READ_REG(hw, E1000_STATUS); bus->func = (status & E1000_STATUS_FUNC_MASK) - >> E1000_STATUS_FUNC_SHIFT; + >> E1000_STATUS_FUNC_SHIFT; } else { bus->func = 0; } @@ -410,7 +410,7 @@ s32 e1000_check_alt_mac_addr_generic(struct e1000_hw *hw) return E1000_SUCCESS; ret_val = hw->nvm.ops.read(hw, NVM_ALT_MAC_ADDR_PTR, 1, - &nvm_alt_mac_addr_offset); + &nvm_alt_mac_addr_offset); if (ret_val) { DEBUGOUT("NVM Read Error\n"); return ret_val; @@ -476,7 +476,7 @@ STATIC void e1000_rar_set_generic(struct e1000_hw *hw, u8 *addr, u32 index) * from network order (big endian) to little endian */ rar_low = ((u32) addr[0] | ((u32) addr[1] << 8) | - ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); + ((u32) addr[2] << 16) | ((u32) addr[3] << 24)); rar_high = ((u32) addr[4] | ((u32) addr[5] << 8)); @@ -539,7 +539,7 @@ u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) * values resulting from each mc_filter_type... * [0] [1] [2] [3] [4] [5] * 01 AA 00 12 34 56 - * LSB MSB + * LSB MSB * * case 0: hash_value = ((0x34 >> 4) | (0x56 << 4)) & 0xFFF = 0x563 * case 1: hash_value = ((0x34 >> 3) | (0x56 << 5)) & 0xFFF = 0xAC6 @@ -562,7 +562,7 @@ u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr) } hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | - (((u16) mc_addr[5]) << bit_shift))); + (((u16) mc_addr[5]) << bit_shift))); return hash_value; } @@ -629,9 +629,9 @@ void e1000_pcix_mmrbc_workaround_generic(struct e1000_hw *hw) e1000_read_pci_cfg(hw, PCIX_COMMAND_REGISTER, &pcix_cmd); e1000_read_pci_cfg(hw, PCIX_STATUS_REGISTER_HI, &pcix_stat_hi_word); cmd_mmrbc = (pcix_cmd & PCIX_COMMAND_MMRBC_MASK) >> - PCIX_COMMAND_MMRBC_SHIFT; + PCIX_COMMAND_MMRBC_SHIFT; stat_mmrbc = (pcix_stat_hi_word & PCIX_STATUS_HI_MMRBC_MASK) >> - PCIX_STATUS_HI_MMRBC_SHIFT; + PCIX_STATUS_HI_MMRBC_SHIFT; if (stat_mmrbc == PCIX_STATUS_HI_MMRBC_4K) stat_mmrbc = PCIX_STATUS_HI_MMRBC_2K; if (cmd_mmrbc > stat_mmrbc) { @@ -967,7 +967,7 @@ s32 e1000_set_default_fc_generic(struct e1000_hw *hw) if (ret_val) { DEBUGOUT("NVM Read Error\n"); - return ret_val; + return ret_val; } if (!(nvm_data & NVM_WORD0F_PAUSE_MASK)) @@ -1081,14 +1081,14 @@ s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) txcw = (E1000_TXCW_ANE | E1000_TXCW_FD); break; case e1000_fc_rx_pause: - /* + /* * Rx Flow control is enabled and Tx Flow control is disabled * by a software over-ride. Since there really isn't a way to * advertise that we are capable of Rx Pause ONLY, we will * advertise that we support both symmetric and asymmetric Rx * PAUSE. Later, we will disable the adapter's ability to send * PAUSE frames. - */ + */ txcw = (E1000_TXCW_ANE | E1000_TXCW_FD | E1000_TXCW_PAUSE_MASK); break; case e1000_fc_tx_pause: @@ -1199,18 +1199,18 @@ s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw) * will restart auto-negotiation. If auto-negotiation is successful * then the link-up status bit will be set and the flow control enable * bits (RFCE and TFCE) will be set according to their negotiated value. - */ + */ DEBUGOUT("Auto-negotiation enabled\n"); E1000_WRITE_REG(hw, E1000_CTRL, ctrl); E1000_WRITE_FLUSH(hw); msec_delay(1); - /* + /* * For these adapters, the SW definable pin 1 is set when the optics * detect a signal. If we have a signal, then poll for a "Link-Up" * indication. - */ + */ if (hw->phy.media_type == e1000_media_type_internal_serdes || (E1000_READ_REG(hw, E1000_CTRL) & E1000_CTRL_SWDPIN1)) { ret_val = e1000_poll_fiber_serdes_link_generic(hw); @@ -1416,11 +1416,11 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) * flow control was negotiated. */ ret_val = hw->phy.ops.read_reg(hw, PHY_AUTONEG_ADV, - &mii_nway_adv_reg); + &mii_nway_adv_reg); if (ret_val) return ret_val; ret_val = hw->phy.ops.read_reg(hw, PHY_LP_ABILITY, - &mii_nway_lp_ability_reg); + &mii_nway_lp_ability_reg); if (ret_val) return ret_val; @@ -1484,9 +1484,9 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) * 0 | 1 | 1 | 1 | e1000_fc_tx_pause */ else if (!(mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + (mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_tx_pause; DEBUGOUT("Flow Control = Tx PAUSE frames only.\n"); } @@ -1499,9 +1499,9 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) * 1 | 1 | 0 | 1 | e1000_fc_rx_pause */ else if ((mii_nway_adv_reg & NWAY_AR_PAUSE) && - (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && - !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && - (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { + (mii_nway_adv_reg & NWAY_AR_ASM_DIR) && + !(mii_nway_lp_ability_reg & NWAY_LPAR_PAUSE) && + (mii_nway_lp_ability_reg & NWAY_LPAR_ASM_DIR)) { hw->fc.current_mode = e1000_fc_rx_pause; DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); } else { @@ -1616,8 +1616,8 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) } else { hw->fc.current_mode = e1000_fc_rx_pause; DEBUGOUT("Flow Control = Rx PAUSE frames only.\n"); + } } - } /* * For receiving PAUSE frames ONLY. * @@ -1667,7 +1667,7 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) ret_val = e1000_force_mac_fc_generic(hw); if (ret_val) { DEBUGOUT("Error forcing flow control settings\n"); - return ret_val; + return ret_val; } } @@ -1684,7 +1684,7 @@ s32 e1000_config_fc_after_link_up_generic(struct e1000_hw *hw) * speed and duplex for copper connections. **/ s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, - u16 *duplex) + u16 *duplex) { u32 status; @@ -1723,7 +1723,7 @@ s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, * for fiber/serdes links. **/ s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, - u16 *speed, u16 *duplex) + u16 *speed, u16 *duplex) { DEBUGFUNC("e1000_get_speed_and_duplex_fiber_serdes_generic"); @@ -1943,9 +1943,9 @@ s32 e1000_setup_led_generic(struct e1000_hw *hw) hw->mac.ledctl_default = ledctl; /* Turn off LED0 */ ledctl &= ~(E1000_LEDCTL_LED0_IVRT | E1000_LEDCTL_LED0_BLINK | - E1000_LEDCTL_LED0_MODE_MASK); + E1000_LEDCTL_LED0_MODE_MASK); ledctl |= (E1000_LEDCTL_MODE_LED_OFF << - E1000_LEDCTL_LED0_MODE_SHIFT); + E1000_LEDCTL_LED0_MODE_SHIFT); E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl); } else if (hw->phy.media_type == e1000_media_type_copper) { E1000_WRITE_REG(hw, E1000_LEDCTL, hw->mac.ledctl_mode1); @@ -1996,7 +1996,7 @@ s32 e1000_blink_led_generic(struct e1000_hw *hw) if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) == E1000_LEDCTL_MODE_LED_ON) ledctl_blink |= (E1000_LEDCTL_LED0_BLINK << - (i * 8)); + (i * 8)); } E1000_WRITE_REG(hw, E1000_LEDCTL, ledctl_blink); @@ -2241,7 +2241,7 @@ s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw) * completion. **/ s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, - u32 offset, u8 data) + u32 offset, u8 data) { u32 i, regvalue = 0; diff --git a/lib/librte_pmd_e1000/e1000/e1000_mac.h b/lib/librte_pmd_e1000/e1000/e1000_mac.h index b18d8461f1..25c5237e13 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_mac.h +++ b/lib/librte_pmd_e1000/e1000/e1000_mac.h @@ -63,14 +63,14 @@ void e1000_set_lan_id_single_port(struct e1000_hw *hw); void e1000_set_lan_id_multi_port_pci(struct e1000_hw *hw); s32 e1000_get_hw_semaphore_generic(struct e1000_hw *hw); s32 e1000_get_speed_and_duplex_copper_generic(struct e1000_hw *hw, u16 *speed, - u16 *duplex); + u16 *duplex); s32 e1000_get_speed_and_duplex_fiber_serdes_generic(struct e1000_hw *hw, - u16 *speed, u16 *duplex); + u16 *speed, u16 *duplex); s32 e1000_id_led_init_generic(struct e1000_hw *hw); s32 e1000_led_on_generic(struct e1000_hw *hw); s32 e1000_led_off_generic(struct e1000_hw *hw); void e1000_update_mc_addr_list_generic(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count); + u8 *mc_addr_list, u32 mc_addr_count); s32 e1000_set_default_fc_generic(struct e1000_hw *hw); s32 e1000_set_fc_watermarks_generic(struct e1000_hw *hw); s32 e1000_setup_fiber_serdes_link_generic(struct e1000_hw *hw); @@ -78,7 +78,7 @@ s32 e1000_setup_led_generic(struct e1000_hw *hw); s32 e1000_setup_link_generic(struct e1000_hw *hw); s32 e1000_validate_mdi_setting_crossover_generic(struct e1000_hw *hw); s32 e1000_write_8bit_ctrl_reg_generic(struct e1000_hw *hw, u32 reg, - u32 offset, u8 data); + u32 offset, u8 data); u32 e1000_hash_mc_addr_generic(struct e1000_hw *hw, u8 *mc_addr); diff --git a/lib/librte_pmd_e1000/e1000/e1000_manage.c b/lib/librte_pmd_e1000/e1000/e1000_manage.c index f7d6c26564..a216036f8e 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_manage.c +++ b/lib/librte_pmd_e1000/e1000/e1000_manage.c @@ -116,7 +116,7 @@ bool e1000_check_mng_mode_generic(struct e1000_hw *hw) return (fwsm & E1000_FWSM_MODE_MASK) == - (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT); } /** @@ -159,11 +159,11 @@ bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) offset = E1000_MNG_DHCP_COOKIE_OFFSET >> 2; for (i = 0; i < len; i++) *(buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, E1000_HOST_IF, - offset + i); + offset + i); hdr_csum = hdr->checksum; hdr->checksum = 0; csum = e1000_calculate_checksum((u8 *)hdr, - E1000_MNG_DHCP_COOKIE_LENGTH); + E1000_MNG_DHCP_COOKIE_LENGTH); /* * If either the checksums or signature don't match, then * the cookie area isn't considered valid, in which case we @@ -189,7 +189,7 @@ bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw) * Writes the command header after does the checksum calculation. **/ s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr) + struct e1000_host_mng_command_header *hdr) { u16 i, length = sizeof(struct e1000_host_mng_command_header); @@ -203,7 +203,7 @@ s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, /* Write the relevant command block into the ram area. */ for (i = 0; i < length; i++) { E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, - *((u32 *) hdr + i)); + *((u32 *) hdr + i)); E1000_WRITE_FLUSH(hw); } @@ -223,7 +223,7 @@ s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, * way. Also fills up the sum of the buffer in *buffer parameter. **/ s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, - u16 length, u16 offset, u8 *sum) + u16 length, u16 offset, u8 *sum) { u8 *tmp; u8 *bufptr = buffer; @@ -269,7 +269,7 @@ s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, } E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, offset + i, - data); + data); } if (remaining) { for (j = 0; j < sizeof(u32); j++) { @@ -319,7 +319,7 @@ s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, u8 *buffer, ret_val = hw->mac.ops.mng_host_if_write(hw, buffer, length, sizeof(hdr), &(hdr.checksum)); if (ret_val) - return ret_val; + return ret_val; /* Write the manageability command header */ ret_val = hw->mac.ops.mng_write_cmd_header(hw, &hdr); @@ -375,7 +375,7 @@ bool e1000_enable_mng_pass_thru(struct e1000_hw *hw) (e1000_mng_mode_pt << 13))) return true; } else if ((manc & E1000_MANC_SMBUS_EN) && - !(manc & E1000_MANC_ASF_EN)) { + !(manc & E1000_MANC_ASF_EN)) { return true; } @@ -429,7 +429,7 @@ s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) */ for (i = 0; i < length; i++) E1000_WRITE_REG_ARRAY_DWORD(hw, E1000_HOST_IF, i, - *((u32 *)buffer + i)); + *((u32 *)buffer + i)); /* Setting this bit tells the ARC that a new command is pending. */ E1000_WRITE_REG(hw, E1000_HICR, hicr | E1000_HICR_C); @@ -450,8 +450,8 @@ s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length) for (i = 0; i < length; i++) *((u32 *)buffer + i) = E1000_READ_REG_ARRAY_DWORD(hw, - E1000_HOST_IF, - i); + E1000_HOST_IF, + i); return E1000_SUCCESS; } diff --git a/lib/librte_pmd_e1000/e1000/e1000_manage.h b/lib/librte_pmd_e1000/e1000/e1000_manage.h index 9a736a8e1f..38a97b2c80 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_manage.h +++ b/lib/librte_pmd_e1000/e1000/e1000_manage.h @@ -38,11 +38,11 @@ bool e1000_check_mng_mode_generic(struct e1000_hw *hw); bool e1000_enable_tx_pkt_filtering_generic(struct e1000_hw *hw); s32 e1000_mng_enable_host_if_generic(struct e1000_hw *hw); s32 e1000_mng_host_if_write_generic(struct e1000_hw *hw, u8 *buffer, - u16 length, u16 offset, u8 *sum); + u16 length, u16 offset, u8 *sum); s32 e1000_mng_write_cmd_header_generic(struct e1000_hw *hw, - struct e1000_host_mng_command_header *hdr); + struct e1000_host_mng_command_header *hdr); s32 e1000_mng_write_dhcp_info_generic(struct e1000_hw *hw, - u8 *buffer, u16 length); + u8 *buffer, u16 length); bool e1000_enable_mng_pass_thru(struct e1000_hw *hw); u8 e1000_calculate_checksum(u8 *buffer, u32 length); s32 e1000_host_interface_command(struct e1000_hw *hw, u8 *buffer, u32 length); @@ -56,40 +56,40 @@ enum e1000_mng_mode { e1000_mng_mode_host_if_only }; -#define E1000_FACTPS_MNGCG 0x20000000 +#define E1000_FACTPS_MNGCG 0x20000000 -#define E1000_FWSM_MODE_MASK 0xE -#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_MODE_MASK 0xE +#define E1000_FWSM_MODE_SHIFT 1 #define E1000_FWSM_FW_VALID 0x00008000 #define E1000_FWSM_HI_EN_ONLY_MODE 0x4 -#define E1000_MNG_IAMT_MODE 0x3 -#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 -#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 -#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 -#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 -#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 -#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING 0x1 +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN 0x2 -#define E1000_VFTA_ENTRY_SHIFT 5 -#define E1000_VFTA_ENTRY_MASK 0x7F -#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F +#define E1000_VFTA_ENTRY_SHIFT 5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F -#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ -#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ #define E1000_HI_COMMAND_TIMEOUT 500 /* Process HI cmd limit */ #define E1000_HI_FW_BASE_ADDRESS 0x10000 #define E1000_HI_FW_MAX_LENGTH (64 * 1024) /* Num of bytes */ #define E1000_HI_FW_BLOCK_DWORD_LENGTH 256 /* Num of DWORDs per page */ #define E1000_HICR_MEMORY_BASE_EN 0x200 /* MB Enable bit - RO */ -#define E1000_HICR_EN 0x01 /* Enable bit - RO */ +#define E1000_HICR_EN 0x01 /* Enable bit - RO */ /* Driver sets this bit when done to put command in RAM */ -#define E1000_HICR_C 0x02 -#define E1000_HICR_SV 0x04 /* Status Validity */ -#define E1000_HICR_FW_RESET_ENABLE 0x40 -#define E1000_HICR_FW_RESET 0x80 +#define E1000_HICR_C 0x02 +#define E1000_HICR_SV 0x04 /* Status Validity */ +#define E1000_HICR_FW_RESET_ENABLE 0x40 +#define E1000_HICR_FW_RESET 0x80 /* Intel(R) Active Management Technology signature */ -#define E1000_IAMT_SIGNATURE 0x544D4149 +#define E1000_IAMT_SIGNATURE 0x544D4149 #endif diff --git a/lib/librte_pmd_e1000/e1000/e1000_mbx.c b/lib/librte_pmd_e1000/e1000/e1000_mbx.c index 0a925dfd31..cc95fb66db 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_mbx.c +++ b/lib/librte_pmd_e1000/e1000/e1000_mbx.c @@ -49,7 +49,7 @@ STATIC s32 e1000_null_mbx_check_for_flag(struct e1000_hw *hw, u16 mbx_id) * @hw: pointer to the HW structure **/ STATIC s32 e1000_null_mbx_transact(struct e1000_hw *hw, u32 *msg, u16 size, - u16 mbx_id) + u16 mbx_id) { DEBUGFUNC("e1000_null_mbx_rw_msg"); @@ -402,7 +402,7 @@ STATIC s32 e1000_check_for_rst_vf(struct e1000_hw *hw, u16 mbx_id) DEBUGFUNC("e1000_check_for_rst_vf"); if (!e1000_check_for_bit_vf(hw, (E1000_V2PMAILBOX_RSTD | - E1000_V2PMAILBOX_RSTI))) { + E1000_V2PMAILBOX_RSTI))) { ret_val = E1000_SUCCESS; hw->mbx.stats.rsts++; } @@ -442,7 +442,7 @@ STATIC s32 e1000_obtain_mbx_lock_vf(struct e1000_hw *hw) * returns SUCCESS if it successfully copied message into the buffer **/ STATIC s32 e1000_write_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 mbx_id) + u16 mbx_id) { s32 ret_val; u16 i; @@ -483,7 +483,7 @@ out_no_write: * returns SUCCESS if it successfuly read message from buffer **/ STATIC s32 e1000_read_mbx_vf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 mbx_id) + u16 mbx_id) { s32 ret_val = E1000_SUCCESS; u16 i; @@ -656,7 +656,7 @@ STATIC s32 e1000_obtain_mbx_lock_pf(struct e1000_hw *hw, u16 vf_number) * returns SUCCESS if it successfully copied message into the buffer **/ STATIC s32 e1000_write_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) + u16 vf_number) { s32 ret_val; u16 i; @@ -699,7 +699,7 @@ out_no_write: * a message due to a VF request so no polling for message is needed. **/ STATIC s32 e1000_read_mbx_pf(struct e1000_hw *hw, u32 *msg, u16 size, - u16 vf_number) + u16 vf_number) { s32 ret_val; u16 i; diff --git a/lib/librte_pmd_e1000/e1000/e1000_mbx.h b/lib/librte_pmd_e1000/e1000/e1000_mbx.h index 52d76f7c79..3bb4482e61 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_mbx.h +++ b/lib/librte_pmd_e1000/e1000/e1000_mbx.h @@ -37,28 +37,28 @@ POSSIBILITY OF SUCH DAMAGE. #include "e1000_api.h" /* Define mailbox register bits */ -#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ -#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */ -#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ -#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ -#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */ -#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ +#define E1000_V2PMAILBOX_REQ 0x00000001 /* Request for PF Ready bit */ +#define E1000_V2PMAILBOX_ACK 0x00000002 /* Ack PF message received */ +#define E1000_V2PMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_V2PMAILBOX_PFSTS 0x00000010 /* PF wrote a message in the MB */ +#define E1000_V2PMAILBOX_PFACK 0x00000020 /* PF ack the previous VF msg */ +#define E1000_V2PMAILBOX_RSTI 0x00000040 /* PF has reset indication */ +#define E1000_V2PMAILBOX_RSTD 0x00000080 /* PF has indicated reset done */ #define E1000_V2PMAILBOX_R2C_BITS 0x000000B0 /* All read to clear bits */ -#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ -#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ -#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ -#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ +#define E1000_P2VMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define E1000_P2VMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define E1000_P2VMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define E1000_P2VMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ #define E1000_MBVFICR_VFREQ_MASK 0x000000FF /* bits for VF messages */ -#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define E1000_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ #define E1000_MBVFICR_VFACK_MASK 0x00FF0000 /* bits for VF acks */ -#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ +#define E1000_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ -#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ +#define E1000_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ /* If it's a E1000_VF_* msg then it originates in the VF and is sent to the * PF. The reverse is true if it is E1000_PF_*. @@ -70,26 +70,26 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_VT_MSGTYPE_NACK 0x40000000 /* Indicates that VF is still clear to send requests */ #define E1000_VT_MSGTYPE_CTS 0x20000000 -#define E1000_VT_MSGINFO_SHIFT 16 +#define E1000_VT_MSGINFO_SHIFT 16 /* bits 23:16 are used for extra info for certain messages */ -#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) +#define E1000_VT_MSGINFO_MASK (0xFF << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_RESET 0x01 /* VF requests reset */ -#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ -#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ +#define E1000_VF_RESET 0x01 /* VF requests reset */ +#define E1000_VF_SET_MAC_ADDR 0x02 /* VF requests to set MAC addr */ +#define E1000_VF_SET_MULTICAST 0x03 /* VF requests to set MC addr */ #define E1000_VF_SET_MULTICAST_COUNT_MASK (0x1F << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ -#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_MULTICAST_OVERFLOW (0x80 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_VLAN 0x04 /* VF requests to set VLAN */ +#define E1000_VF_SET_VLAN_ADD (0x01 << E1000_VT_MSGINFO_SHIFT) #define E1000_VF_SET_LPE 0x05 /* reqs to set VMOLR.LPE */ #define E1000_VF_SET_PROMISC 0x06 /* reqs to clear VMOLR.ROPE/MPME*/ -#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) -#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_PROMISC_UNICAST (0x01 << E1000_VT_MSGINFO_SHIFT) +#define E1000_VF_SET_PROMISC_MULTICAST (0x02 << E1000_VT_MSGINFO_SHIFT) -#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ +#define E1000_PF_CONTROL_MSG 0x0100 /* PF control message */ -#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ -#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ +#define E1000_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define E1000_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ s32 e1000_read_mbx(struct e1000_hw *, u32 *, u16, u16); s32 e1000_write_mbx(struct e1000_hw *, u32 *, u16, u16); diff --git a/lib/librte_pmd_e1000/e1000/e1000_nvm.c b/lib/librte_pmd_e1000/e1000/e1000_nvm.c index fc586fe475..9c15bed2bd 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_nvm.c +++ b/lib/librte_pmd_e1000/e1000/e1000_nvm.c @@ -404,7 +404,7 @@ static s32 e1000_ready_nvm_eeprom(struct e1000_hw *hw) */ while (timeout) { e1000_shift_out_eec_bits(hw, NVM_RDSR_OPCODE_SPI, - hw->nvm.opcode_bits); + hw->nvm.opcode_bits); spi_stat_reg = (u8)e1000_shift_in_eec_bits(hw, 8); if (!(spi_stat_reg & NVM_STATUS_RDY_SPI)) break; @@ -495,7 +495,7 @@ release: * Reads a 16 bit word from the EEPROM. **/ s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) + u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; u32 i = 0; @@ -579,7 +579,7 @@ s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) break; data[i] = (E1000_READ_REG(hw, E1000_EERD) >> - E1000_NVM_RW_REG_DATA); + E1000_NVM_RW_REG_DATA); } return ret_val; @@ -632,7 +632,7 @@ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) /* Send the WRITE ENABLE command (8 bit opcode) */ e1000_shift_out_eec_bits(hw, NVM_WREN_OPCODE_SPI, - nvm->opcode_bits); + nvm->opcode_bits); e1000_standby_nvm(hw); @@ -646,7 +646,7 @@ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) /* Send the Write command (8-bit opcode + addr) */ e1000_shift_out_eec_bits(hw, write_opcode, nvm->opcode_bits); e1000_shift_out_eec_bits(hw, (u16)((offset + widx) * 2), - nvm->address_bits); + nvm->address_bits); /* Loop to allow for up to whole page write of eeprom */ while (widx < words) { @@ -660,8 +660,8 @@ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) break; } } - msec_delay(10); - nvm->ops.release(hw); + msec_delay(10); + nvm->ops.release(hw); } return ret_val; @@ -680,7 +680,7 @@ s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data) * EEPROM will most likely contain an invalid checksum. **/ s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data) + u16 *data) { struct e1000_nvm_info *nvm = &hw->nvm; s32 ret_val; @@ -709,7 +709,7 @@ s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, goto release; e1000_shift_out_eec_bits(hw, NVM_EWEN_OPCODE_MICROWIRE, - (u16)(nvm->opcode_bits + 2)); + (u16)(nvm->opcode_bits + 2)); e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); @@ -717,10 +717,10 @@ s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, while (words_written < words) { e1000_shift_out_eec_bits(hw, NVM_WRITE_OPCODE_MICROWIRE, - nvm->opcode_bits); + nvm->opcode_bits); e1000_shift_out_eec_bits(hw, (u16)(offset + words_written), - nvm->address_bits); + nvm->address_bits); e1000_shift_out_eec_bits(hw, data[words_written], 16); @@ -745,7 +745,7 @@ s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, u16 words, } e1000_shift_out_eec_bits(hw, NVM_EWDS_OPCODE_MICROWIRE, - (u16)(nvm->opcode_bits + 2)); + (u16)(nvm->opcode_bits + 2)); e1000_shift_out_eec_bits(hw, 0, (u16)(nvm->address_bits - 2)); @@ -765,7 +765,7 @@ release: * the value in pba_num. **/ s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size) + u32 pba_num_size) { s32 ret_val; u16 nvm_data; @@ -1094,7 +1094,7 @@ s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf, ret_val = e1000_read_nvm(hw, pba_word[1] + 0, 1, &length); if (ret_val) - return ret_val; + return ret_val; } else { if (eeprom_buf_size > pba_word[1]) length = eeprom_buf[pba_word[1] + 0]; diff --git a/lib/librte_pmd_e1000/e1000/e1000_nvm.h b/lib/librte_pmd_e1000/e1000/e1000_nvm.h index 5696f1322f..e6948d8f0b 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_nvm.h +++ b/lib/librte_pmd_e1000/e1000/e1000_nvm.h @@ -65,7 +65,7 @@ s32 e1000_acquire_nvm_generic(struct e1000_hw *hw); s32 e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int ee_reg); s32 e1000_read_mac_addr_generic(struct e1000_hw *hw); s32 e1000_read_pba_string_generic(struct e1000_hw *hw, u8 *pba_num, - u32 pba_num_size); + u32 pba_num_size); s32 e1000_read_pba_length_generic(struct e1000_hw *hw, u32 *pba_num_size); s32 e1000_read_pba_raw(struct e1000_hw *hw, u16 *eeprom_buf, u32 eeprom_buf_size, u16 max_pba_block_size, @@ -76,21 +76,21 @@ s32 e1000_get_pba_block_size(struct e1000_hw *hw, u16 *eeprom_buf, u32 eeprom_buf_size, u16 *pba_block_size); s32 e1000_read_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, u16 *data); s32 e1000_read_nvm_microwire(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); + u16 words, u16 *data); s32 e1000_read_nvm_eerd(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); + u16 *data); s32 e1000_valid_led_default_generic(struct e1000_hw *hw, u16 *data); s32 e1000_validate_nvm_checksum_generic(struct e1000_hw *hw); s32 e1000_write_nvm_microwire(struct e1000_hw *hw, u16 offset, - u16 words, u16 *data); + u16 words, u16 *data); s32 e1000_write_nvm_spi(struct e1000_hw *hw, u16 offset, u16 words, - u16 *data); + u16 *data); s32 e1000_update_nvm_checksum_generic(struct e1000_hw *hw); void e1000_stop_nvm(struct e1000_hw *hw); void e1000_release_nvm_generic(struct e1000_hw *hw); void e1000_get_fw_version(struct e1000_hw *hw, struct e1000_fw_version *fw_vers); -#define E1000_STM_OPCODE 0xDB00 +#define E1000_STM_OPCODE 0xDB00 #endif diff --git a/lib/librte_pmd_e1000/e1000/e1000_phy.c b/lib/librte_pmd_e1000/e1000/e1000_phy.c index ef2b9582b4..35f988df2f 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_phy.c +++ b/lib/librte_pmd_e1000/e1000/e1000_phy.c @@ -44,8 +44,8 @@ STATIC s32 e1000_access_phy_debug_regs_hv(struct e1000_hw *hw, u32 offset, static const u16 e1000_m88_cable_length_table[] = { 0, 50, 80, 110, 140, 140, E1000_CABLE_LENGTH_UNDEFINED }; #define M88E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_m88_cable_length_table) / \ - sizeof(e1000_m88_cable_length_table[0])) + (sizeof(e1000_m88_cable_length_table) / \ + sizeof(e1000_m88_cable_length_table[0])) static const u16 e1000_igp_2_cable_length_table[] = { 0, 0, 0, 0, 0, 0, 0, 0, 3, 5, 8, 11, 13, 16, 18, 21, 0, 0, 0, 3, @@ -57,8 +57,8 @@ static const u16 e1000_igp_2_cable_length_table[] = { 100, 105, 109, 113, 116, 119, 122, 124, 104, 109, 114, 118, 121, 124}; #define IGP02E1000_CABLE_LENGTH_TABLE_SIZE \ - (sizeof(e1000_igp_2_cable_length_table) / \ - sizeof(e1000_igp_2_cable_length_table[0])) + (sizeof(e1000_igp_2_cable_length_table) / \ + sizeof(e1000_igp_2_cable_length_table[0])) /** * e1000_init_phy_ops_generic - Initialize PHY function pointers @@ -219,18 +219,18 @@ s32 e1000_get_phy_id(struct e1000_hw *hw) return E1000_SUCCESS; while (retry_count < 2) { - ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); - if (ret_val) + ret_val = phy->ops.read_reg(hw, PHY_ID1, &phy_id); + if (ret_val) return ret_val; - phy->id = (u32)(phy_id << 16); - usec_delay(20); - ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); - if (ret_val) + phy->id = (u32)(phy_id << 16); + usec_delay(20); + ret_val = phy->ops.read_reg(hw, PHY_ID2, &phy_id); + if (ret_val) return ret_val; - phy->id |= (u32)(phy_id & PHY_REVISION_MASK); - phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); + phy->id |= (u32)(phy_id & PHY_REVISION_MASK); + phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK); if (phy->id != 0 && phy->id != PHY_REVISION_MASK) return E1000_SUCCESS; @@ -258,7 +258,7 @@ s32 e1000_phy_reset_dsp_generic(struct e1000_hw *hw) ret_val = hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0xC1); if (ret_val) - return ret_val; + return ret_val; return hw->phy.ops.write_reg(hw, M88E1000_PHY_GEN_CONTROL, 0); } @@ -290,8 +290,8 @@ s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data) * PHY to retrieve the desired data. */ mdic = ((offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_READ)); + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_READ)); E1000_WRITE_REG(hw, E1000_MDIC, mdic); @@ -352,9 +352,9 @@ s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data) * PHY to retrieve the desired data. */ mdic = (((u32)data) | - (offset << E1000_MDIC_REG_SHIFT) | - (phy->addr << E1000_MDIC_PHY_SHIFT) | - (E1000_MDIC_OP_WRITE)); + (offset << E1000_MDIC_REG_SHIFT) | + (phy->addr << E1000_MDIC_PHY_SHIFT) | + (E1000_MDIC_OP_WRITE)); E1000_WRITE_REG(hw, E1000_MDIC, mdic); @@ -410,8 +410,8 @@ s32 e1000_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data) * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - (E1000_I2CCMD_OPCODE_READ)); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + (E1000_I2CCMD_OPCODE_READ)); E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); @@ -469,9 +469,9 @@ s32 e1000_write_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 data) * PHY to retrieve the desired data. */ i2ccmd = ((offset << E1000_I2CCMD_REG_ADDR_SHIFT) | - (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | - E1000_I2CCMD_OPCODE_WRITE | - phy_data_swapped); + (phy->addr << E1000_I2CCMD_PHY_ADDR_SHIFT) | + E1000_I2CCMD_OPCODE_WRITE | + phy_data_swapped); E1000_WRITE_REG(hw, E1000_I2CCMD, i2ccmd); @@ -651,7 +651,7 @@ s32 e1000_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data) return ret_val; ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); hw->phy.ops.release(hw); @@ -681,7 +681,7 @@ s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data) return ret_val; ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); hw->phy.ops.release(hw); @@ -720,7 +720,7 @@ s32 e1000_set_page_igp(struct e1000_hw *hw, u16 page) * semaphores before exiting. **/ static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) + bool locked) { s32 ret_val = E1000_SUCCESS; @@ -737,12 +737,12 @@ static s32 __e1000_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data, if (offset > MAX_PHY_MULTI_PAGE_REG) ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); if (!ret_val) ret_val = e1000_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); if (!locked) hw->phy.ops.release(hw); @@ -789,7 +789,7 @@ s32 e1000_read_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 *data) * at the offset. Release any acquired semaphores before exiting. **/ static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) + bool locked) { s32 ret_val = E1000_SUCCESS; @@ -806,12 +806,12 @@ static s32 __e1000_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data, if (offset > MAX_PHY_MULTI_PAGE_REG) ret_val = e1000_write_phy_reg_mdic(hw, - IGP01E1000_PHY_PAGE_SELECT, - (u16)offset); + IGP01E1000_PHY_PAGE_SELECT, + (u16)offset); if (!ret_val) ret_val = e1000_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset, - data); + data); if (!locked) hw->phy.ops.release(hw); @@ -858,7 +858,7 @@ s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data) * Release any acquired semaphores before exiting. **/ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, - bool locked) + bool locked) { u32 kmrnctrlsta; @@ -876,7 +876,7 @@ static s32 __e1000_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data, } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; + E1000_KMRNCTRLSTA_OFFSET) | E1000_KMRNCTRLSTA_REN; E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); E1000_WRITE_FLUSH(hw); @@ -933,7 +933,7 @@ s32 e1000_read_kmrn_reg_locked(struct e1000_hw *hw, u32 offset, u16 *data) * before exiting. **/ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, - bool locked) + bool locked) { u32 kmrnctrlsta; @@ -951,7 +951,7 @@ static s32 __e1000_write_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 data, } kmrnctrlsta = ((offset << E1000_KMRNCTRLSTA_OFFSET_SHIFT) & - E1000_KMRNCTRLSTA_OFFSET) | data; + E1000_KMRNCTRLSTA_OFFSET) | data; E1000_WRITE_REG(hw, E1000_KMRNCTRLSTA, kmrnctrlsta); E1000_WRITE_FLUSH(hw); @@ -1064,7 +1064,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) ret_val = hw->phy.ops.write_reg(hw, I82577_CFG_REG, phy_data); if (ret_val) - return ret_val; + return ret_val; /* Set MDI/MDIX mode */ ret_val = hw->phy.ops.read_reg(hw, I82577_PHY_CTRL_2, &phy_data); @@ -1118,7 +1118,7 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) /* For BM PHY this bit is downshift enable */ if (phy->type != e1000_phy_bm) - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; /* * Options: @@ -1189,7 +1189,7 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) * to 25MHz clock. */ ret_val = phy->ops.read_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); + &phy_data); if (ret_val) return ret_val; @@ -1203,12 +1203,12 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) } else { /* Configure Master and Slave downshift values */ phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); + M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | - M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); + M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); } ret_val = phy->ops.write_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); + phy_data); if (ret_val) return ret_val; } @@ -1250,7 +1250,7 @@ s32 e1000_copper_link_setup_m88(struct e1000_hw *hw) if (phy->type == e1000_phy_i210) { ret_val = e1000_set_master_slave_mode(hw); if (ret_val) - return ret_val; + return ret_val; } return E1000_SUCCESS; @@ -1418,15 +1418,15 @@ s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) if (phy->autoneg_advertised == ADVERTISE_1000_FULL) { /* Disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) return ret_val; @@ -1436,13 +1436,13 @@ s32 e1000_copper_link_setup_igp(struct e1000_hw *hw) return ret_val; data &= ~CR_1000T_MS_ENABLE; - ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); - if (ret_val) - return ret_val; - } + ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, data); + if (ret_val) + return ret_val; + } ret_val = e1000_set_master_slave_mode(hw); - } + } return ret_val; } @@ -1475,7 +1475,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (phy->autoneg_mask & ADVERTISE_1000_FULL) { /* Read the MII 1000Base-T Control Register (Address 9). */ ret_val = phy->ops.read_reg(hw, PHY_1000T_CTRL, - &mii_1000t_ctrl_reg); + &mii_1000t_ctrl_reg); if (ret_val) return ret_val; } @@ -1494,9 +1494,9 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) * the 1000Base-T Control Register (Address 9). */ mii_autoneg_adv_reg &= ~(NWAY_AR_100TX_FD_CAPS | - NWAY_AR_100TX_HD_CAPS | - NWAY_AR_10T_FD_CAPS | - NWAY_AR_10T_HD_CAPS); + NWAY_AR_100TX_HD_CAPS | + NWAY_AR_10T_FD_CAPS | + NWAY_AR_10T_HD_CAPS); mii_1000t_ctrl_reg &= ~(CR_1000T_HD_CAPS | CR_1000T_FD_CAPS); DEBUGOUT1("autoneg_advertised %x\n", phy->autoneg_advertised); @@ -1602,7 +1602,7 @@ s32 e1000_phy_setup_autoneg(struct e1000_hw *hw) if (phy->autoneg_mask & ADVERTISE_1000_FULL) ret_val = phy->ops.write_reg(hw, PHY_1000T_CTRL, - mii_1000t_ctrl_reg); + mii_1000t_ctrl_reg); return ret_val; } @@ -1624,22 +1624,22 @@ s32 e1000_copper_link_autoneg(struct e1000_hw *hw) DEBUGFUNC("e1000_copper_link_autoneg"); - /* + /* * Perform some bounds checking on the autoneg advertisement * parameter. - */ + */ phy->autoneg_advertised &= phy->autoneg_mask; - /* + /* * If autoneg_advertised is zero, we assume it was not defaulted * by the calling code so we set to advertise full capability. - */ + */ if (!phy->autoneg_advertised) phy->autoneg_advertised = phy->autoneg_mask; DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); ret_val = e1000_phy_setup_autoneg(hw); - if (ret_val) { + if (ret_val) { DEBUGOUT("Error Setting up Auto-Negotiation\n"); return ret_val; } @@ -1818,19 +1818,19 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) /* I210 and I211 devices support Auto-Crossover in forced operation. */ if (phy->type != e1000_phy_i210) { - /* + /* * Clear Auto-Crossover to force MDI manually. M88E1000 * requires MDI forced whenever speed and duplex are forced. - */ + */ ret_val = phy->ops.read_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); - if (ret_val) + if (ret_val) return ret_val; - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; ret_val = phy->ops.write_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); - if (ret_val) + if (ret_val) return ret_val; } @@ -1855,7 +1855,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) DEBUGOUT("Waiting for forced speed/duplex link on M88 phy.\n"); ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); + 100000, &link); if (ret_val) return ret_val; @@ -1895,7 +1895,7 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) /* Try once more */ ret_val = e1000_phy_has_link_generic(hw, PHY_FORCE_LIMIT, - 100000, &link); + 100000, &link); if (ret_val) return ret_val; } @@ -1904,8 +1904,8 @@ s32 e1000_phy_force_speed_duplex_m88(struct e1000_hw *hw) return E1000_SUCCESS; if (hw->phy.id == I347AT4_E_PHY_ID || - hw->phy.id == M88E1340M_E_PHY_ID || - hw->phy.id == M88E1112_E_PHY_ID) + hw->phy.id == M88E1340M_E_PHY_ID || + hw->phy.id == M88E1112_E_PHY_ID) return E1000_SUCCESS; if (hw->phy.id == I210_I_PHY_ID) return E1000_SUCCESS; @@ -2095,7 +2095,7 @@ s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) if (!active) { data &= ~IGP02E1000_PM_D3_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); if (ret_val) return ret_val; /* @@ -2106,49 +2106,49 @@ s32 e1000_set_d3_lplu_state_generic(struct e1000_hw *hw, bool active) */ if (phy->smart_speed == e1000_smart_speed_on) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) return ret_val; data |= IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) return ret_val; } else if (phy->smart_speed == e1000_smart_speed_off) { ret_val = phy->ops.read_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - &data); + IGP01E1000_PHY_PORT_CONFIG, + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - data); + IGP01E1000_PHY_PORT_CONFIG, + data); if (ret_val) return ret_val; } } else if ((phy->autoneg_advertised == E1000_ALL_SPEED_DUPLEX) || - (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || - (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { + (phy->autoneg_advertised == E1000_ALL_NOT_GIG) || + (phy->autoneg_advertised == E1000_ALL_10_SPEED)) { data |= IGP02E1000_PM_D3_LPLU; ret_val = phy->ops.write_reg(hw, IGP02E1000_PHY_POWER_MGMT, - data); + data); if (ret_val) return ret_val; /* When LPLU is enabled, we should disable SmartSpeed */ ret_val = phy->ops.read_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &data); + &data); if (ret_val) return ret_val; data &= ~IGP01E1000_PSCFR_SMART_SPEED; ret_val = phy->ops.write_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - data); + data); } return ret_val; @@ -2176,14 +2176,14 @@ s32 e1000_check_downshift_generic(struct e1000_hw *hw) case e1000_phy_gg82563: case e1000_phy_bm: case e1000_phy_82578: - offset = M88E1000_PHY_SPEC_STATUS; - mask = M88E1000_PSSR_DOWNSHIFT; + offset = M88E1000_PHY_SPEC_STATUS; + mask = M88E1000_PSSR_DOWNSHIFT; break; case e1000_phy_igp: case e1000_phy_igp_2: case e1000_phy_igp_3: - offset = IGP01E1000_PHY_LINK_HEALTH; - mask = IGP01E1000_PLHR_SS_DOWNGRADE; + offset = IGP01E1000_PHY_LINK_HEALTH; + mask = IGP01E1000_PLHR_SS_DOWNGRADE; break; default: /* speed downshift not supported */ @@ -2219,8 +2219,8 @@ s32 e1000_check_polarity_m88(struct e1000_hw *hw) if (!ret_val) phy->cable_polarity = (data & M88E1000_PSSR_REV_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; return ret_val; } @@ -2252,23 +2252,23 @@ s32 e1000_check_polarity_igp(struct e1000_hw *hw) if ((data & IGP01E1000_PSSR_SPEED_MASK) == IGP01E1000_PSSR_SPEED_1000MBPS) { - offset = IGP01E1000_PHY_PCS_INIT_REG; - mask = IGP01E1000_PHY_POLARITY_MASK; + offset = IGP01E1000_PHY_PCS_INIT_REG; + mask = IGP01E1000_PHY_POLARITY_MASK; } else { /* * This really only applies to 10Mbps since * there is no polarity for 100Mbps (always 0). */ - offset = IGP01E1000_PHY_PORT_STATUS; - mask = IGP01E1000_PSSR_POLARITY_REVERSED; + offset = IGP01E1000_PHY_PORT_STATUS; + mask = IGP01E1000_PSSR_POLARITY_REVERSED; } ret_val = phy->ops.read_reg(hw, offset, &data); if (!ret_val) phy->cable_polarity = (data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; return ret_val; } @@ -2302,8 +2302,8 @@ s32 e1000_check_polarity_ife(struct e1000_hw *hw) if (!ret_val) phy->cable_polarity = (phy_data & mask) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; return ret_val; } @@ -2355,7 +2355,7 @@ s32 e1000_wait_autoneg_generic(struct e1000_hw *hw) * Polls the PHY status register for link, 'iterations' number of times. **/ s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success) + u32 usec_interval, bool *success) { s32 ret_val = E1000_SUCCESS; u16 i, phy_status; @@ -2423,7 +2423,7 @@ s32 e1000_get_cable_length_m88(struct e1000_hw *hw) return ret_val; index = (phy_data & M88E1000_PSSR_CABLE_LENGTH) >> - M88E1000_PSSR_CABLE_LENGTH_SHIFT; + M88E1000_PSSR_CABLE_LENGTH_SHIFT; if (index >= M88E1000_CABLE_LENGTH_TABLE_SIZE - 1) return -E1000_ERR_PHY; @@ -2564,10 +2564,10 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) u16 cur_agc_index, max_agc_index = 0; u16 min_agc_index = IGP02E1000_CABLE_LENGTH_TABLE_SIZE - 1; static const u16 agc_reg_array[IGP02E1000_PHY_CHANNEL_NUM] = { - IGP02E1000_PHY_AGC_A, - IGP02E1000_PHY_AGC_B, - IGP02E1000_PHY_AGC_C, - IGP02E1000_PHY_AGC_D + IGP02E1000_PHY_AGC_A, + IGP02E1000_PHY_AGC_B, + IGP02E1000_PHY_AGC_C, + IGP02E1000_PHY_AGC_D }; DEBUGFUNC("e1000_get_cable_length_igp_2"); @@ -2585,7 +2585,7 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) * approximate cable length. */ cur_agc_index = (phy_data >> IGP02E1000_AGC_LENGTH_SHIFT) & - IGP02E1000_AGC_LENGTH_MASK; + IGP02E1000_AGC_LENGTH_MASK; /* Array index bound check. */ if ((cur_agc_index >= IGP02E1000_CABLE_LENGTH_TABLE_SIZE) || @@ -2604,12 +2604,12 @@ s32 e1000_get_cable_length_igp_2(struct e1000_hw *hw) } agc_value -= (e1000_igp_2_cable_length_table[min_agc_index] + - e1000_igp_2_cable_length_table[max_agc_index]); + e1000_igp_2_cable_length_table[max_agc_index]); agc_value /= (IGP02E1000_PHY_CHANNEL_NUM - 2); /* Calculate cable length with the error range of +/- 10 meters. */ phy->min_cable_length = ((agc_value - IGP02E1000_AGC_RANGE) > 0) ? - (agc_value - IGP02E1000_AGC_RANGE) : 0; + (agc_value - IGP02E1000_AGC_RANGE) : 0; phy->max_cable_length = agc_value + IGP02E1000_AGC_RANGE; phy->cable_length = (phy->min_cable_length + phy->max_cable_length) / 2; @@ -2677,12 +2677,12 @@ s32 e1000_get_phy_info_m88(struct e1000_hw *hw) return ret_val; phy->local_rx = (phy_data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; phy->remote_rx = (phy_data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; } else { /* Set values to "undefined" */ phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; @@ -2743,12 +2743,12 @@ s32 e1000_get_phy_info_igp(struct e1000_hw *hw) return ret_val; phy->local_rx = (data & SR_1000T_LOCAL_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; phy->remote_rx = (data & SR_1000T_REMOTE_RX_STATUS) - ? e1000_1000t_rx_status_ok - : e1000_1000t_rx_status_not_ok; + ? e1000_1000t_rx_status_ok + : e1000_1000t_rx_status_not_ok; } else { phy->cable_length = E1000_CABLE_LENGTH_UNDEFINED; phy->local_rx = e1000_1000t_rx_status_undefined; @@ -2794,8 +2794,8 @@ s32 e1000_get_phy_info_ife(struct e1000_hw *hw) } else { /* Polarity is forced */ phy->cable_polarity = (data & IFE_PSC_FORCE_POLARITY) - ? e1000_rev_polarity_reversed - : e1000_rev_polarity_normal; + ? e1000_rev_polarity_reversed + : e1000_rev_polarity_normal; } ret_val = phy->ops.read_reg(hw, IFE_PHY_MDIX_CONTROL, &data); @@ -2861,7 +2861,7 @@ s32 e1000_phy_hw_reset_generic(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_hw_reset_generic"); if (phy->ops.check_reset_block) { - ret_val = phy->ops.check_reset_block(hw); + ret_val = phy->ops.check_reset_block(hw); if (ret_val) return E1000_SUCCESS; } diff --git a/lib/librte_pmd_e1000/e1000/e1000_phy.h b/lib/librte_pmd_e1000/e1000/e1000_phy.h index 7a542cd3a9..130e6dbd46 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_phy.h +++ b/lib/librte_pmd_e1000/e1000/e1000_phy.h @@ -85,7 +85,7 @@ s32 e1000_write_phy_reg_igp_locked(struct e1000_hw *hw, u32 offset, u16 data); s32 e1000_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data); s32 e1000_phy_reset_dsp(struct e1000_hw *hw); s32 e1000_phy_has_link_generic(struct e1000_hw *hw, u32 iterations, - u32 usec_interval, bool *success); + u32 usec_interval, bool *success); s32 e1000_phy_init_script_igp3(struct e1000_hw *hw); enum e1000_phy_type e1000_get_phy_type_from_id(u32 phy_id); s32 e1000_determine_phy_address(struct e1000_hw *hw); @@ -121,17 +121,17 @@ s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); #define E1000_MAX_PHY_ADDR 8 /* IGP01E1000 Specific Registers */ -#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ -#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ -#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ -#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ -#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */ -#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */ -#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ -#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ -#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ -#define IGP_PAGE_SHIFT 5 -#define PHY_REG_MASK 0x1F +#define IGP01E1000_PHY_PORT_CONFIG 0x10 /* Port Config */ +#define IGP01E1000_PHY_PORT_STATUS 0x11 /* Status */ +#define IGP01E1000_PHY_PORT_CTRL 0x12 /* Control */ +#define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health */ +#define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO */ +#define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 /* Power Management */ +#define IGP01E1000_PHY_PAGE_SELECT 0x1F /* Page Select */ +#define BM_PHY_PAGE_SELECT 22 /* Page Select for BM */ +#define IGP_PAGE_SHIFT 5 +#define PHY_REG_MASK 0x1F /* GS40G - I210 PHY defines */ #define GS40G_PAGE_SELECT 0x16 @@ -168,26 +168,26 @@ s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); (((offset) >> (PHY_UPPER_SHIFT - PHY_PAGE_SHIFT)) &\ ~MAX_PHY_REG_ADDRESS))) -#define HV_INTC_FC_PAGE_START 768 -#define I82578_ADDR_REG 29 -#define I82577_ADDR_REG 16 -#define I82577_CFG_REG 22 -#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) -#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ -#define I82577_CTRL_REG 23 +#define HV_INTC_FC_PAGE_START 768 +#define I82578_ADDR_REG 29 +#define I82577_ADDR_REG 16 +#define I82577_CFG_REG 22 +#define I82577_CFG_ASSERT_CRS_ON_TX (1 << 15) +#define I82577_CFG_ENABLE_DOWNSHIFT (3 << 10) /* auto downshift 100/10 */ +#define I82577_CTRL_REG 23 /* 82577 specific PHY registers */ -#define I82577_PHY_CTRL_2 18 -#define I82577_PHY_LBK_CTRL 19 -#define I82577_PHY_STATUS_2 26 -#define I82577_PHY_DIAG_STATUS 31 +#define I82577_PHY_CTRL_2 18 +#define I82577_PHY_LBK_CTRL 19 +#define I82577_PHY_STATUS_2 26 +#define I82577_PHY_DIAG_STATUS 31 /* I82577 PHY Status 2 */ -#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 -#define I82577_PHY_STATUS2_MDIX 0x0800 -#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 -#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 -#define I82577_PHY_STATUS2_SPEED_100MBPS 0x0100 +#define I82577_PHY_STATUS2_REV_POLARITY 0x0400 +#define I82577_PHY_STATUS2_MDIX 0x0800 +#define I82577_PHY_STATUS2_SPEED_MASK 0x0300 +#define I82577_PHY_STATUS2_SPEED_1000MBPS 0x0200 +#define I82577_PHY_STATUS2_SPEED_100MBPS 0x0100 /* I82577 PHY Control 2 */ #define I82577_PHY_CTRL2_MANUAL_MDIX 0x0200 @@ -195,14 +195,14 @@ s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); #define I82577_PHY_CTRL2_MDIX_CFG_MASK 0x0600 /* I82577 PHY Diagnostics Status */ -#define I82577_DSTATUS_CABLE_LENGTH 0x03FC -#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 +#define I82577_DSTATUS_CABLE_LENGTH 0x03FC +#define I82577_DSTATUS_CABLE_LENGTH_SHIFT 2 /* 82580 PHY Power Management */ -#define E1000_82580_PHY_POWER_MGMT 0xE14 -#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ -#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ -#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ +#define E1000_82580_PHY_POWER_MGMT 0xE14 +#define E1000_82580_PM_SPD 0x0001 /* Smart Power Down */ +#define E1000_82580_PM_D0_LPLU 0x0002 /* For D0a states */ +#define E1000_82580_PM_D3_LPLU 0x0004 /* For all other states */ #define E1000_82580_PM_GO_LINKD 0x0020 /* Go Link Disconnect */ /* BM PHY Copper Specific Control 1 */ @@ -224,53 +224,53 @@ s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); #define HV_M_STATUS_SPEED_1000 0x0200 #define HV_M_STATUS_LINK_UP 0x0040 -#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 -#define IGP01E1000_PHY_POLARITY_MASK 0x0078 +#define IGP01E1000_PHY_PCS_INIT_REG 0x00B4 +#define IGP01E1000_PHY_POLARITY_MASK 0x0078 -#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 -#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ +#define IGP01E1000_PSCR_AUTO_MDIX 0x1000 +#define IGP01E1000_PSCR_FORCE_MDI_MDIX 0x2000 /* 0=MDI, 1=MDIX */ -#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 +#define IGP01E1000_PSCFR_SMART_SPEED 0x0080 /* Enable flexible speed on link-up */ -#define IGP01E1000_GMII_FLEX_SPD 0x0010 -#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */ +#define IGP01E1000_GMII_FLEX_SPD 0x0010 +#define IGP01E1000_GMII_SPD 0x0020 /* Enable SPD */ -#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ -#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ -#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* For D0a states */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* For all other states */ -#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 +#define IGP01E1000_PLHR_SS_DOWNGRADE 0x8000 -#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 -#define IGP01E1000_PSSR_MDIX 0x0800 -#define IGP01E1000_PSSR_SPEED_MASK 0xC000 -#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 +#define IGP01E1000_PSSR_POLARITY_REVERSED 0x0002 +#define IGP01E1000_PSSR_MDIX 0x0800 +#define IGP01E1000_PSSR_SPEED_MASK 0xC000 +#define IGP01E1000_PSSR_SPEED_1000MBPS 0xC000 -#define IGP02E1000_PHY_CHANNEL_NUM 4 -#define IGP02E1000_PHY_AGC_A 0x11B1 -#define IGP02E1000_PHY_AGC_B 0x12B1 -#define IGP02E1000_PHY_AGC_C 0x14B1 -#define IGP02E1000_PHY_AGC_D 0x18B1 +#define IGP02E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 -#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */ -#define IGP02E1000_AGC_LENGTH_MASK 0x7F -#define IGP02E1000_AGC_RANGE 15 +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Course - 15:13, Fine - 12:9 */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F +#define IGP02E1000_AGC_RANGE 15 -#define IGP03E1000_PHY_MISC_CTRL 0x1B -#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */ +#define IGP03E1000_PHY_MISC_CTRL 0x1B +#define IGP03E1000_PHY_MISC_DUPLEX_MANUAL_SET 0x1000 /* Manually Set Duplex */ -#define E1000_CABLE_LENGTH_UNDEFINED 0xFF +#define E1000_CABLE_LENGTH_UNDEFINED 0xFF -#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 -#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 -#define E1000_KMRNCTRLSTA_REN 0x00200000 +#define E1000_KMRNCTRLSTA_OFFSET 0x001F0000 +#define E1000_KMRNCTRLSTA_OFFSET_SHIFT 16 +#define E1000_KMRNCTRLSTA_REN 0x00200000 #define E1000_KMRNCTRLSTA_CTRL_OFFSET 0x1 /* Kumeran Control */ -#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ -#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ -#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ -#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ -#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ +#define E1000_KMRNCTRLSTA_DIAG_OFFSET 0x3 /* Kumeran Diagnostic */ +#define E1000_KMRNCTRLSTA_TIMEOUTS 0x4 /* Kumeran Timeouts */ +#define E1000_KMRNCTRLSTA_INBAND_PARAM 0x9 /* Kumeran InBand Parameters */ +#define E1000_KMRNCTRLSTA_IBIST_DISABLE 0x0200 /* Kumeran IBIST Disable */ +#define E1000_KMRNCTRLSTA_DIAG_NELPBK 0x1000 /* Nearend Loopback mode */ #define E1000_KMRNCTRLSTA_K1_CONFIG 0x7 #define E1000_KMRNCTRLSTA_K1_ENABLE 0x0002 /* enable K1 */ #define E1000_KMRNCTRLSTA_UNBLOCK_RX 0x0004 /* unblock Kumeran Rx in K0/K1 */ @@ -281,27 +281,27 @@ s32 e1000_read_phy_reg_gs40g(struct e1000_hw *hw, u32 offset, u16 *data); #define E1000_KMRNCTRLSTA_K0_GBE_EN 0x1000 /* ena K0s mode for 1G link */ #define E1000_KMRNCTRLSTA_K0_100_EN 0x2000 /* ena K0s mode for 10/100 lnk */ -#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 -#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */ -#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */ -#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ +#define IFE_PHY_EXTENDED_STATUS_CONTROL 0x10 +#define IFE_PHY_SPECIAL_CONTROL 0x11 /* 100BaseTx PHY Special Control */ +#define IFE_PHY_SPECIAL_CONTROL_LED 0x1B /* PHY Special and LED Control */ +#define IFE_PHY_MDIX_CONTROL 0x1C /* MDI/MDI-X Control */ /* IFE PHY Extended Status Control */ -#define IFE_PESC_POLARITY_REVERSED 0x0100 +#define IFE_PESC_POLARITY_REVERSED 0x0100 /* IFE PHY Special Control */ -#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 -#define IFE_PSC_FORCE_POLARITY 0x0020 -#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 +#define IFE_PSC_AUTO_POLARITY_DISABLE 0x0010 +#define IFE_PSC_FORCE_POLARITY 0x0020 +#define IFE_PSC_DISABLE_DYNAMIC_POWER_DOWN 0x0100 /* IFE PHY Special Control and LED Control */ -#define IFE_PSCL_PROBE_MODE 0x0020 -#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ -#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ +#define IFE_PSCL_PROBE_MODE 0x0020 +#define IFE_PSCL_PROBE_LEDS_OFF 0x0006 /* Force LEDs 0 and 2 off */ +#define IFE_PSCL_PROBE_LEDS_ON 0x0007 /* Force LEDs 0 and 2 on */ /* IFE PHY MDIX Control */ -#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ -#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ +#define IFE_PMC_MDIX_STATUS 0x0020 /* 1=MDI-X, 0=MDI */ +#define IFE_PMC_FORCE_MDIX 0x0040 /* 1=force MDI-X, 0=force MDI */ #define IFE_PMC_AUTO_MDIX 0x0080 /* 1=enable auto, 0=disable */ /* SFP modules ID memory locations */ diff --git a/lib/librte_pmd_e1000/e1000/e1000_regs.h b/lib/librte_pmd_e1000/e1000/e1000_regs.h index 693fd14953..4bd9493942 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_regs.h +++ b/lib/librte_pmd_e1000/e1000/e1000_regs.h @@ -34,81 +34,81 @@ POSSIBILITY OF SUCH DAMAGE. #ifndef _E1000_REGS_H_ #define _E1000_REGS_H_ -#define E1000_CTRL 0x00000 /* Device Control - RW */ -#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ -#define E1000_STATUS 0x00008 /* Device Status - RO */ -#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ -#define E1000_EERD 0x00014 /* EEPROM Read - RW */ -#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ -#define E1000_FLA 0x0001C /* Flash Access - RW */ -#define E1000_MDIC 0x00020 /* MDI Control - RW */ -#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ -#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ -#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ +#define E1000_CTRL 0x00000 /* Device Control - RW */ +#define E1000_CTRL_DUP 0x00004 /* Device Control Duplicate (Shadow) - RW */ +#define E1000_STATUS 0x00008 /* Device Status - RO */ +#define E1000_EECD 0x00010 /* EEPROM/Flash Control - RW */ +#define E1000_EERD 0x00014 /* EEPROM Read - RW */ +#define E1000_CTRL_EXT 0x00018 /* Extended Device Control - RW */ +#define E1000_FLA 0x0001C /* Flash Access - RW */ +#define E1000_MDIC 0x00020 /* MDI Control - RW */ +#define E1000_MDICNFG 0x00E04 /* MDI Config - RW */ +#define E1000_REGISTER_SET_SIZE 0x20000 /* CSR Size */ +#define E1000_EEPROM_INIT_CTRL_WORD_2 0x0F /* EEPROM Init Ctrl Word 2 */ #define E1000_EEPROM_PCIE_CTRL_WORD_2 0x28 /* EEPROM PCIe Ctrl Word 2 */ -#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ -#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ -#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ +#define E1000_BARCTRL 0x5BBC /* BAR ctrl reg */ +#define E1000_BARCTRL_FLSIZE 0x0700 /* BAR ctrl Flsize */ +#define E1000_BARCTRL_CSRSIZE 0x2000 /* BAR ctrl CSR size */ #define E1000_I350_BARCTRL 0x5BFC /* BAR ctrl reg */ #define E1000_I350_DTXMXPKTSZ 0x355C /* Maximum sent packet size reg*/ -#define E1000_SCTL 0x00024 /* SerDes Control - RW */ -#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ -#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ -#define E1000_FEXT 0x0002C /* Future Extended - RW */ -#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ +#define E1000_SCTL 0x00024 /* SerDes Control - RW */ +#define E1000_FCAL 0x00028 /* Flow Control Address Low - RW */ +#define E1000_FCAH 0x0002C /* Flow Control Address High -RW */ +#define E1000_FEXT 0x0002C /* Future Extended - RW */ +#define E1000_FEXTNVM 0x00028 /* Future Extended NVM - RW */ #define E1000_FEXTNVM2 0x00030 /* Future Extended NVM 2 - RW */ #define E1000_FEXTNVM3 0x0003C /* Future Extended NVM 3 - RW */ #define E1000_FEXTNVM4 0x00024 /* Future Extended NVM 4 - RW */ -#define E1000_FCT 0x00030 /* Flow Control Type - RW */ -#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ -#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ -#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ -#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ -#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ -#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ -#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ -#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ +#define E1000_FCT 0x00030 /* Flow Control Type - RW */ +#define E1000_CONNSW 0x00034 /* Copper/Fiber switch control - RW */ +#define E1000_VET 0x00038 /* VLAN Ether Type - RW */ +#define E1000_ICR 0x000C0 /* Interrupt Cause Read - R/clr */ +#define E1000_ITR 0x000C4 /* Interrupt Throttling Rate - RW */ +#define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ +#define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ +#define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_IVAR 0x000E4 /* Interrupt Vector Allocation Register - RW */ #define E1000_SVCR 0x000F0 #define E1000_SVT 0x000F4 #define E1000_LPIC 0x000FC /* Low Power IDLE control */ -#define E1000_RCTL 0x00100 /* Rx Control - RW */ -#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ -#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ -#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ +#define E1000_RCTL 0x00100 /* Rx Control - RW */ +#define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ +#define E1000_TXCW 0x00178 /* Tx Configuration Word - RW */ +#define E1000_RXCW 0x00180 /* Rx Configuration Word - RO */ #define E1000_PBA_ECC 0x01100 /* PBA ECC Register */ -#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ -#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) -#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ -#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ -#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ -#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ -#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ -#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ -#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ -#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ -#define E1000_TCTL 0x00400 /* Tx Control - RW */ -#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ -#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ -#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */ -#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ -#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ -#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ -#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ -#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + (0x4 * (_n))) +#define E1000_EICS 0x01520 /* Ext. Interrupt Cause Set - W0 */ +#define E1000_EIMS 0x01524 /* Ext. Interrupt Mask Set/Read - RW */ +#define E1000_EIMC 0x01528 /* Ext. Interrupt Mask Clear - WO */ +#define E1000_EIAC 0x0152C /* Ext. Interrupt Auto Clear - RW */ +#define E1000_EIAM 0x01530 /* Ext. Interrupt Ack Auto Clear Mask - RW */ +#define E1000_GPIE 0x01514 /* General Purpose Interrupt Enable - RW */ +#define E1000_IVAR0 0x01700 /* Interrupt Vector Allocation (array) - RW */ +#define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes - RW */ +#define E1000_TCTL 0x00400 /* Tx Control - RW */ +#define E1000_TCTL_EXT 0x00404 /* Extended Tx Control - RW */ +#define E1000_TIPG 0x00410 /* Tx Inter-packet gap -RW */ +#define E1000_TBT 0x00448 /* Tx Burst Timer - RW */ +#define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ +#define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ +#define E1000_PHY_CTRL 0x00F10 /* PHY Control Register in CSR */ #define E1000_POEMB E1000_PHY_CTRL /* PHY OEM Bits */ -#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ -#define E1000_PBS 0x01008 /* Packet Buffer Size */ -#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ -#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ -#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ -#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ -#define E1000_FLSWCTL 0x01030 /* FLASH control register */ -#define E1000_FLSWDATA 0x01034 /* FLASH data register */ -#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ -#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ -#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ -#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ +#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */ +#define E1000_I2CPARAMS 0x0102C /* SFPI2C Parameters Register - RW */ #define E1000_I2CBB_EN 0x00000100 /* I2C - Bit Bang Enable */ #define E1000_I2C_CLK_OUT 0x00000200 /* I2C- Clock */ #define E1000_I2C_DATA_OUT 0x00000400 /* I2C- Data Out */ @@ -117,35 +117,35 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_I2C_CLK_OE_N 0x00002000 /* I2C- Clock Output Enable */ #define E1000_I2C_CLK_IN 0x00004000 /* I2C- Clock In */ #define E1000_I2C_CLK_STRETCH_DIS 0x00008000 /* I2C- Dis Clk Stretching */ -#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ -#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ -#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ -#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ -#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ +#define E1000_WDSTP 0x01040 /* Watchdog Setup - RW */ +#define E1000_SWDSTS 0x01044 /* SW Device Status - RW */ +#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */ +#define E1000_TCPTIMER 0x0104C /* TCP Timer - RW */ +#define E1000_VPDDIAG 0x01060 /* VPD Diagnostic - RO */ #define E1000_ICR_V2 0x01500 /* Intr Cause - new location - RC */ #define E1000_ICS_V2 0x01504 /* Intr Cause Set - new location - WO */ #define E1000_IMS_V2 0x01508 /* Intr Mask Set/Read - new location - RW */ #define E1000_IMC_V2 0x0150C /* Intr Mask Clear - new location - WO */ #define E1000_IAM_V2 0x01510 /* Intr Ack Auto Mask - new location - RW */ -#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ -#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ -#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ -#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ -#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n))) -#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ -#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ +#define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ +#define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ +#define E1000_RDFPCQ(_n) (0x02430 + (0x4 * (_n))) +#define E1000_PBRTH 0x02458 /* PB Rx Arbitration Threshold - RW */ +#define E1000_FCRTV 0x02460 /* Flow Control Refresh Timer Value - RW */ /* Split and Replication Rx Control - RW */ -#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ -#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ -#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ -#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ -#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ -#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ -#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ +#define E1000_RDPUMB 0x025CC /* DMA Rx Descriptor uC Mailbox - RW */ +#define E1000_RDPUAD 0x025D0 /* DMA Rx Descriptor uC Addr Command - RW */ +#define E1000_RDPUWD 0x025D4 /* DMA Rx Descriptor uC Data Write - RW */ +#define E1000_RDPURD 0x025D8 /* DMA Rx Descriptor uC Data Read - RW */ +#define E1000_RDPUCTL 0x025DC /* DMA Rx Descriptor uC Control - RW */ +#define E1000_PBDIAG 0x02458 /* Packet Buffer Diagnostic - RW */ +#define E1000_RXPBS 0x02404 /* Rx Packet Buffer Size - RW */ #define E1000_IRPBS 0x02404 /* Same as RXPBS, renamed for newer Si - RW */ -#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ -#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ -#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ +#define E1000_PBRWAC 0x024E8 /* Rx packet buffer wrap around counter - RO */ +#define E1000_RDTR 0x02820 /* Rx Delay Timer - RW */ +#define E1000_RADV 0x0282C /* Rx Interrupt Absolute Delay Timer - RW */ #define E1000_SRWR 0x12018 /* Shadow Ram Write Register - RW */ #define E1000_I210_FLMNGCTL 0x12038 #define E1000_I210_FLMNGDATA 0x1203C @@ -210,173 +210,173 @@ POSSIBILITY OF SUCH DAMAGE. * Example usage: * E1000_RDBAL_REG(current_rx_queue) */ -#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ - (0x0C000 + ((_n) * 0x40))) -#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ - (0x0C004 + ((_n) * 0x40))) -#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ - (0x0C008 + ((_n) * 0x40))) -#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ - (0x0C00C + ((_n) * 0x40))) -#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ - (0x0C010 + ((_n) * 0x40))) -#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ - (0x0C014 + ((_n) * 0x40))) -#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) -#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ - (0x0C018 + ((_n) * 0x40))) -#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ - (0x0C028 + ((_n) * 0x40))) -#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ - (0x0C030 + ((_n) * 0x40))) -#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ - (0x0E000 + ((_n) * 0x40))) -#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ - (0x0E004 + ((_n) * 0x40))) -#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ - (0x0E008 + ((_n) * 0x40))) -#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ - (0x0E010 + ((_n) * 0x40))) -#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ - (0x0E014 + ((_n) * 0x40))) +#define E1000_RDBAL(_n) ((_n) < 4 ? (0x02800 + ((_n) * 0x100)) : \ + (0x0C000 + ((_n) * 0x40))) +#define E1000_RDBAH(_n) ((_n) < 4 ? (0x02804 + ((_n) * 0x100)) : \ + (0x0C004 + ((_n) * 0x40))) +#define E1000_RDLEN(_n) ((_n) < 4 ? (0x02808 + ((_n) * 0x100)) : \ + (0x0C008 + ((_n) * 0x40))) +#define E1000_SRRCTL(_n) ((_n) < 4 ? (0x0280C + ((_n) * 0x100)) : \ + (0x0C00C + ((_n) * 0x40))) +#define E1000_RDH(_n) ((_n) < 4 ? (0x02810 + ((_n) * 0x100)) : \ + (0x0C010 + ((_n) * 0x40))) +#define E1000_RXCTL(_n) ((_n) < 4 ? (0x02814 + ((_n) * 0x100)) : \ + (0x0C014 + ((_n) * 0x40))) +#define E1000_DCA_RXCTRL(_n) E1000_RXCTL(_n) +#define E1000_RDT(_n) ((_n) < 4 ? (0x02818 + ((_n) * 0x100)) : \ + (0x0C018 + ((_n) * 0x40))) +#define E1000_RXDCTL(_n) ((_n) < 4 ? (0x02828 + ((_n) * 0x100)) : \ + (0x0C028 + ((_n) * 0x40))) +#define E1000_RQDPC(_n) ((_n) < 4 ? (0x02830 + ((_n) * 0x100)) : \ + (0x0C030 + ((_n) * 0x40))) +#define E1000_TDBAL(_n) ((_n) < 4 ? (0x03800 + ((_n) * 0x100)) : \ + (0x0E000 + ((_n) * 0x40))) +#define E1000_TDBAH(_n) ((_n) < 4 ? (0x03804 + ((_n) * 0x100)) : \ + (0x0E004 + ((_n) * 0x40))) +#define E1000_TDLEN(_n) ((_n) < 4 ? (0x03808 + ((_n) * 0x100)) : \ + (0x0E008 + ((_n) * 0x40))) +#define E1000_TDH(_n) ((_n) < 4 ? (0x03810 + ((_n) * 0x100)) : \ + (0x0E010 + ((_n) * 0x40))) +#define E1000_TXCTL(_n) ((_n) < 4 ? (0x03814 + ((_n) * 0x100)) : \ + (0x0E014 + ((_n) * 0x40))) #define E1000_DCA_TXCTRL(_n) E1000_TXCTL(_n) -#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ - (0x0E018 + ((_n) * 0x40))) -#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ - (0x0E028 + ((_n) * 0x40))) -#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ - (0x0E038 + ((_n) * 0x40))) -#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ - (0x0E03C + ((_n) * 0x40))) -#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) -#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ -#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ -#define E1000_TXDMAC 0x03000 /* Tx DMA Control - RW */ -#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ -#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) -#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ - (0x054E0 + ((_i - 16) * 8))) -#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ - (0x054E4 + ((_i - 16) * 8))) -#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) -#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) -#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) -#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) -#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) -#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) -#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) -#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) +#define E1000_TDT(_n) ((_n) < 4 ? (0x03818 + ((_n) * 0x100)) : \ + (0x0E018 + ((_n) * 0x40))) +#define E1000_TXDCTL(_n) ((_n) < 4 ? (0x03828 + ((_n) * 0x100)) : \ + (0x0E028 + ((_n) * 0x40))) +#define E1000_TDWBAL(_n) ((_n) < 4 ? (0x03838 + ((_n) * 0x100)) : \ + (0x0E038 + ((_n) * 0x40))) +#define E1000_TDWBAH(_n) ((_n) < 4 ? (0x0383C + ((_n) * 0x100)) : \ + (0x0E03C + ((_n) * 0x40))) +#define E1000_TARC(_n) (0x03840 + ((_n) * 0x100)) +#define E1000_RSRPD 0x02C00 /* Rx Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ +#define E1000_TXDMAC 0x03000 /* Tx DMA Control - RW */ +#define E1000_KABGTXD 0x03004 /* AFE Band Gap Transmit Ref Data */ +#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4)) +#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x054E0 + ((_i - 16) * 8))) +#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x054E4 + ((_i - 16) * 8))) +#define E1000_SHRAL(_i) (0x05438 + ((_i) * 8)) +#define E1000_SHRAH(_i) (0x0543C + ((_i) * 8)) +#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8)) +#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4)) +#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4)) +#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8)) +#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8)) +#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8)) #define E1000_PBSLAC 0x03100 /* Pkt Buffer Slave Access Control */ #define E1000_PBSLAD(_n) (0x03110 + (0x4 * (_n))) /* Pkt Buffer DWORD */ -#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ +#define E1000_TXPBS 0x03404 /* Tx Packet Buffer Size - RW */ /* Same as TXPBS, renamed for newer Si - RW */ #define E1000_ITPBS 0x03404 -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ #define E1000_TDPUMB 0x0357C /* DMA Tx Desc uC Mail Box - RW */ #define E1000_TDPUAD 0x03580 /* DMA Tx Desc uC Addr Command - RW */ #define E1000_TDPUWD 0x03584 /* DMA Tx Desc uC Data Write - RW */ #define E1000_TDPURD 0x03588 /* DMA Tx Desc uC Data Read - RW */ #define E1000_TDPUCTL 0x0358C /* DMA Tx Desc uC Control - RW */ -#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ -#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ -#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ +#define E1000_DTXCTL 0x03590 /* DMA Tx Control - RW */ +#define E1000_DTXTCPFLGL 0x0359C /* DMA Tx Control flag low - RW */ +#define E1000_DTXTCPFLGH 0x035A0 /* DMA Tx Control flag high - RW */ /* DMA Tx Max Total Allow Size Reqs - RW */ #define E1000_DTXMXSZRQ 0x03540 -#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ -#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ -#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ -#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ -#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ -#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ -#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ -#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ -#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ -#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ -#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ -#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ -#define E1000_COLC 0x04028 /* Collision Count - R/clr */ -#define E1000_DC 0x04030 /* Defer Count - R/clr */ -#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ -#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ -#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ -#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ -#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ -#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ -#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ -#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ -#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ -#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ -#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ -#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ -#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ -#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ -#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ -#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ -#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ -#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ -#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ -#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ -#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ -#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ -#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ -#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ -#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ -#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ -#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ -#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ -#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ -#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ -#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ -#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ -#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ -#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ -#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ -#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ -#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ -#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ -#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ -#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ -#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ -#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ -#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ -#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ -#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ -#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ -#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ -#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ -#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ -#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ -#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ -#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ -#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ -#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ -#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ -#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ +#define E1000_TIDV 0x03820 /* Tx Interrupt Delay Value - RW */ +#define E1000_TADV 0x0382C /* Tx Interrupt Absolute Delay Val - RW */ +#define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ +#define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ +#define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ +#define E1000_RXERRC 0x0400C /* Receive Error Count - R/clr */ +#define E1000_MPC 0x04010 /* Missed Packet Count - R/clr */ +#define E1000_SCC 0x04014 /* Single Collision Count - R/clr */ +#define E1000_ECOL 0x04018 /* Excessive Collision Count - R/clr */ +#define E1000_MCC 0x0401C /* Multiple Collision Count - R/clr */ +#define E1000_LATECOL 0x04020 /* Late Collision Count - R/clr */ +#define E1000_COLC 0x04028 /* Collision Count - R/clr */ +#define E1000_DC 0x04030 /* Defer Count - R/clr */ +#define E1000_TNCRS 0x04034 /* Tx-No CRS - R/clr */ +#define E1000_SEC 0x04038 /* Sequence Error Count - R/clr */ +#define E1000_CEXTERR 0x0403C /* Carrier Extension Error Count - R/clr */ +#define E1000_RLEC 0x04040 /* Receive Length Error Count - R/clr */ +#define E1000_XONRXC 0x04048 /* XON Rx Count - R/clr */ +#define E1000_XONTXC 0x0404C /* XON Tx Count - R/clr */ +#define E1000_XOFFRXC 0x04050 /* XOFF Rx Count - R/clr */ +#define E1000_XOFFTXC 0x04054 /* XOFF Tx Count - R/clr */ +#define E1000_FCRUC 0x04058 /* Flow Control Rx Unsupported Count- R/clr */ +#define E1000_PRC64 0x0405C /* Packets Rx (64 bytes) - R/clr */ +#define E1000_PRC127 0x04060 /* Packets Rx (65-127 bytes) - R/clr */ +#define E1000_PRC255 0x04064 /* Packets Rx (128-255 bytes) - R/clr */ +#define E1000_PRC511 0x04068 /* Packets Rx (255-511 bytes) - R/clr */ +#define E1000_PRC1023 0x0406C /* Packets Rx (512-1023 bytes) - R/clr */ +#define E1000_PRC1522 0x04070 /* Packets Rx (1024-1522 bytes) - R/clr */ +#define E1000_GPRC 0x04074 /* Good Packets Rx Count - R/clr */ +#define E1000_BPRC 0x04078 /* Broadcast Packets Rx Count - R/clr */ +#define E1000_MPRC 0x0407C /* Multicast Packets Rx Count - R/clr */ +#define E1000_GPTC 0x04080 /* Good Packets Tx Count - R/clr */ +#define E1000_GORCL 0x04088 /* Good Octets Rx Count Low - R/clr */ +#define E1000_GORCH 0x0408C /* Good Octets Rx Count High - R/clr */ +#define E1000_GOTCL 0x04090 /* Good Octets Tx Count Low - R/clr */ +#define E1000_GOTCH 0x04094 /* Good Octets Tx Count High - R/clr */ +#define E1000_RNBC 0x040A0 /* Rx No Buffers Count - R/clr */ +#define E1000_RUC 0x040A4 /* Rx Undersize Count - R/clr */ +#define E1000_RFC 0x040A8 /* Rx Fragment Count - R/clr */ +#define E1000_ROC 0x040AC /* Rx Oversize Count - R/clr */ +#define E1000_RJC 0x040B0 /* Rx Jabber Count - R/clr */ +#define E1000_MGTPRC 0x040B4 /* Management Packets Rx Count - R/clr */ +#define E1000_MGTPDC 0x040B8 /* Management Packets Dropped Count - R/clr */ +#define E1000_MGTPTC 0x040BC /* Management Packets Tx Count - R/clr */ +#define E1000_TORL 0x040C0 /* Total Octets Rx Low - R/clr */ +#define E1000_TORH 0x040C4 /* Total Octets Rx High - R/clr */ +#define E1000_TOTL 0x040C8 /* Total Octets Tx Low - R/clr */ +#define E1000_TOTH 0x040CC /* Total Octets Tx High - R/clr */ +#define E1000_TPR 0x040D0 /* Total Packets Rx - R/clr */ +#define E1000_TPT 0x040D4 /* Total Packets Tx - R/clr */ +#define E1000_PTC64 0x040D8 /* Packets Tx (64 bytes) - R/clr */ +#define E1000_PTC127 0x040DC /* Packets Tx (65-127 bytes) - R/clr */ +#define E1000_PTC255 0x040E0 /* Packets Tx (128-255 bytes) - R/clr */ +#define E1000_PTC511 0x040E4 /* Packets Tx (256-511 bytes) - R/clr */ +#define E1000_PTC1023 0x040E8 /* Packets Tx (512-1023 bytes) - R/clr */ +#define E1000_PTC1522 0x040EC /* Packets Tx (1024-1522 Bytes) - R/clr */ +#define E1000_MPTC 0x040F0 /* Multicast Packets Tx Count - R/clr */ +#define E1000_BPTC 0x040F4 /* Broadcast Packets Tx Count - R/clr */ +#define E1000_TSCTC 0x040F8 /* TCP Segmentation Context Tx - R/clr */ +#define E1000_TSCTFC 0x040FC /* TCP Segmentation Context Tx Fail - R/clr */ +#define E1000_IAC 0x04100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x04104 /* Interrupt Cause Rx Pkt Timer Expire Count */ +#define E1000_ICRXATC 0x04108 /* Interrupt Cause Rx Abs Timer Expire Count */ +#define E1000_ICTXPTC 0x0410C /* Interrupt Cause Tx Pkt Timer Expire Count */ +#define E1000_ICTXATC 0x04110 /* Interrupt Cause Tx Abs Timer Expire Count */ +#define E1000_ICTXQEC 0x04118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x0411C /* Interrupt Cause Tx Queue Min Thresh Count */ +#define E1000_ICRXDMTC 0x04120 /* Interrupt Cause Rx Desc Min Thresh Count */ +#define E1000_ICRXOC 0x04124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_CRC_OFFSET 0x05F50 /* CRC Offset register */ -#define E1000_VFGPRC 0x00F10 -#define E1000_VFGORC 0x00F18 -#define E1000_VFMPRC 0x00F3C -#define E1000_VFGPTC 0x00F14 -#define E1000_VFGOTC 0x00F34 -#define E1000_VFGOTLBC 0x00F50 -#define E1000_VFGPTLBC 0x00F44 -#define E1000_VFGORLBC 0x00F48 -#define E1000_VFGPRLBC 0x00F40 +#define E1000_VFGPRC 0x00F10 +#define E1000_VFGORC 0x00F18 +#define E1000_VFMPRC 0x00F3C +#define E1000_VFGPTC 0x00F14 +#define E1000_VFGOTC 0x00F34 +#define E1000_VFGOTLBC 0x00F50 +#define E1000_VFGPTLBC 0x00F44 +#define E1000_VFGORLBC 0x00F48 +#define E1000_VFGPRLBC 0x00F40 /* Virtualization statistical counters */ -#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) -#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) -#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) -#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) -#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) -#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) -#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) -#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) -#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) +#define E1000_PFVFGPRC(_n) (0x010010 + (0x100 * (_n))) +#define E1000_PFVFGPTC(_n) (0x010014 + (0x100 * (_n))) +#define E1000_PFVFGORC(_n) (0x010018 + (0x100 * (_n))) +#define E1000_PFVFGOTC(_n) (0x010034 + (0x100 * (_n))) +#define E1000_PFVFMPRC(_n) (0x010038 + (0x100 * (_n))) +#define E1000_PFVFGPRLBC(_n) (0x010040 + (0x100 * (_n))) +#define E1000_PFVFGPTLBC(_n) (0x010044 + (0x100 * (_n))) +#define E1000_PFVFGORLBC(_n) (0x010048 + (0x100 * (_n))) +#define E1000_PFVFGOTLBC(_n) (0x010050 + (0x100 * (_n))) /* LinkSec */ #define E1000_LSECTXUT 0x04300 /* Tx Untagged Pkt Cnt */ @@ -419,70 +419,70 @@ POSSIBILITY OF SUCH DAMAGE. * LinkSec Rx Keys - where _n is the SA no. and _m the 4 dwords of the 128 bit * key - RW. */ -#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) +#define E1000_LSECRXKEY(_n, _m) (0x0B350 + (0x10 * (_n)) + (0x04 * (_m))) #define E1000_SSVPC 0x041A0 /* Switch Security Violation Pkt Cnt */ -#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ -#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ -#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ +#define E1000_IPSCTRL 0xB430 /* IpSec Control Register */ +#define E1000_IPSRXCMD 0x0B408 /* IPSec Rx Command Register - RW */ +#define E1000_IPSRXIDX 0x0B400 /* IPSec Rx Index - RW */ /* IPSec Rx IPv4/v6 Address - RW */ #define E1000_IPSRXIPADDR(_n) (0x0B420 + (0x04 * (_n))) /* IPSec Rx 128-bit Key - RW */ #define E1000_IPSRXKEY(_n) (0x0B410 + (0x04 * (_n))) -#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ -#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ +#define E1000_IPSRXSALT 0x0B404 /* IPSec Rx Salt - RW */ +#define E1000_IPSRXSPI 0x0B40C /* IPSec Rx SPI - RW */ /* IPSec Tx 128-bit Key - RW */ #define E1000_IPSTXKEY(_n) (0x0B460 + (0x04 * (_n))) -#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ -#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ -#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ -#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ -#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ -#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ -#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ -#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ -#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ -#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ -#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ -#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ -#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ -#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ -#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ -#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ -#define E1000_LENERRS 0x04138 /* Length Errors Count */ -#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ -#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ -#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ -#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ -#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ +#define E1000_IPSTXSALT 0x0B454 /* IPSec Tx Salt - RW */ +#define E1000_IPSTXIDX 0x0B450 /* IPSec Tx SA IDX - RW */ +#define E1000_PCS_CFG0 0x04200 /* PCS Configuration 0 - RW */ +#define E1000_PCS_LCTL 0x04208 /* PCS Link Control - RW */ +#define E1000_PCS_LSTAT 0x0420C /* PCS Link Status - RO */ +#define E1000_CBTMPC 0x0402C /* Circuit Breaker Tx Packet Count */ +#define E1000_HTDPMC 0x0403C /* Host Transmit Discarded Packets */ +#define E1000_CBRDPC 0x04044 /* Circuit Breaker Rx Dropped Count */ +#define E1000_CBRMPC 0x040FC /* Circuit Breaker Rx Packet Count */ +#define E1000_RPTHC 0x04104 /* Rx Packets To Host */ +#define E1000_HGPTC 0x04118 /* Host Good Packets Tx Count */ +#define E1000_HTCBDPC 0x04124 /* Host Tx Circuit Breaker Dropped Count */ +#define E1000_HGORCL 0x04128 /* Host Good Octets Received Count Low */ +#define E1000_HGORCH 0x0412C /* Host Good Octets Received Count High */ +#define E1000_HGOTCL 0x04130 /* Host Good Octets Transmit Count Low */ +#define E1000_HGOTCH 0x04134 /* Host Good Octets Transmit Count High */ +#define E1000_LENERRS 0x04138 /* Length Errors Count */ +#define E1000_SCVPC 0x04228 /* SerDes/SGMII Code Violation Pkt Count */ +#define E1000_HRMPC 0x0A018 /* Header Redirection Missed Packet Count */ +#define E1000_PCS_ANADV 0x04218 /* AN advertisement - RW */ +#define E1000_PCS_LPAB 0x0421C /* Link Partner Ability - RW */ +#define E1000_PCS_NPTX 0x04220 /* AN Next Page Transmit - RW */ #define E1000_PCS_LPABNP 0x04224 /* Link Partner Ability Next Pg - RW */ #define E1000_1GSTAT_RCV 0x04228 /* 1GSTAT Code Violation Pkt Cnt - RW */ -#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ -#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ -#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ -#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ -#define E1000_RA 0x05400 /* Receive Address - RW Array */ +#define E1000_RXCSUM 0x05000 /* Rx Checksum Control - RW */ +#define E1000_RLPML 0x05004 /* Rx Long Packet Max Length */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ +#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ +#define E1000_RA 0x05400 /* Receive Address - RW Array */ #define E1000_RA2 0x054E0 /* 2nd half of Rx address array - RW Array */ -#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ -#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ +#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ +#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */ #define E1000_CIAA 0x05B88 /* Config Indirect Access Address - RW */ #define E1000_CIAD 0x05B8C /* Config Indirect Access Data - RW */ -#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ -#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ -#define E1000_WUC 0x05800 /* Wakeup Control - RW */ -#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ -#define E1000_WUS 0x05810 /* Wakeup Status - RO */ -#define E1000_MANC 0x05820 /* Management Control - RW */ -#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ -#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ -#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ -#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ -#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ -#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ -#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ -#define E1000_HOST_IF 0x08800 /* Host Interface */ -#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ -#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_VFQA0 0x0B000 /* VLAN Filter Queue Array 0 - RW Array */ +#define E1000_VFQA1 0x0B200 /* VLAN Filter Queue Array 1 - RW Array */ +#define E1000_WUC 0x05800 /* Wakeup Control - RW */ +#define E1000_WUFC 0x05808 /* Wakeup Filter Control - RW */ +#define E1000_WUS 0x05810 /* Wakeup Status - RO */ +#define E1000_MANC 0x05820 /* Management Control - RW */ +#define E1000_IPAV 0x05838 /* IP Address Valid - RW */ +#define E1000_IP4AT 0x05840 /* IPv4 Address Table - RW Array */ +#define E1000_IP6AT 0x05880 /* IPv6 Address Table - RW Array */ +#define E1000_WUPL 0x05900 /* Wakeup Packet Length - RW */ +#define E1000_WUPM 0x05A00 /* Wakeup Packet Memory - RO A */ +#define E1000_PBACL 0x05B68 /* MSIx PBA Clear - Read/Write 1's to clear */ +#define E1000_FFLT 0x05F00 /* Flexible Filter Length Table - RW Array */ +#define E1000_HOST_IF 0x08800 /* Host Interface */ +#define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ +#define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ #define E1000_HIBBA 0x8F40 /* Host Interface Buffer Base Address */ /* Flexible Host Filter Table */ #define E1000_FHFT(_n) (0x09000 + ((_n) * 0x100)) @@ -490,37 +490,37 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_FHFT_EXT(_n) (0x09A00 + ((_n) * 0x100)) -#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ -#define E1000_MDPHYA 0x0003C /* PHY address - RW */ -#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ +#define E1000_KMRNCTRLSTA 0x00034 /* MAC-PHY interface - RW */ +#define E1000_MDPHYA 0x0003C /* PHY address - RW */ +#define E1000_MANC2H 0x05860 /* Management Control To Host - RW */ /* Management Decision Filters */ #define E1000_MDEF(_n) (0x05890 + (4 * (_n))) #define E1000_SW_FW_SYNC 0x05B5C /* SW-FW Synchronization - RW */ -#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ -#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ -#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ -#define E1000_GCR 0x05B00 /* PCI-Ex Control */ -#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ -#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ -#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ -#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ -#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ -#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ -#define E1000_SWSM 0x05B50 /* SW Semaphore */ -#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_CCMCTL 0x05B48 /* CCM Control Register */ +#define E1000_GIOCTL 0x05B44 /* GIO Analog Control Register */ +#define E1000_SCCTL 0x05B4C /* PCIc PLL Configuration Register */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GCR2 0x05B64 /* PCI-Ex Control #2 */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ /* Driver-only SW semaphore (not used by BOOT agents) */ #define E1000_SWSM2 0x05B58 -#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ -#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ -#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ -#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ -#define E1000_HICR 0x08F00 /* Host Interface Control */ -#define E1000_FWSTS 0x08F0C /* FW Status */ +#define E1000_DCA_ID 0x05B70 /* DCA Requester ID Information - RO */ +#define E1000_DCA_CTRL 0x05B74 /* DCA Control - RW */ +#define E1000_UFUSE 0x05B78 /* UFUSE - RO */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Interface Control */ +#define E1000_FWSTS 0x08F0C /* FW Status */ /* RSS registers */ -#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ -#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ -#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ +#define E1000_CPUVEC 0x02C10 /* CPU Vector Register - RW */ +#define E1000_MRQC 0x05818 /* Multiple Receive Control - RW */ +#define E1000_IMIR(_i) (0x05A80 + ((_i) * 4)) /* Immediate Interrupt */ #define E1000_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* Immediate INTR Ext*/ #define E1000_IMIRVP 0x05AC0 /* Immediate INT Rx VLAN Priority -RW */ #define E1000_MSIXBM(_i) (0x01600 + ((_i) * 4)) /* MSI-X Alloc Reg -RW */ @@ -532,79 +532,79 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_MSIXTMSG(_i) (0x0C008 + ((_i) * 0x10)) /* MSI-X Table entry vector ctrl reg - RW */ #define E1000_MSIXVCTRL(_i) (0x0C00C + ((_i) * 0x10)) -#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */ -#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ -#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ -#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ -#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ +#define E1000_MSIXPBA 0x0E000 /* MSI-X Pending bit array */ +#define E1000_RETA(_i) (0x05C00 + ((_i) * 4)) /* Redirection Table - RW */ +#define E1000_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* RSS Random Key - RW */ +#define E1000_RSSIM 0x05864 /* RSS Interrupt Mask */ +#define E1000_RSSIR 0x05868 /* RSS Interrupt Request */ /* VT Registers */ -#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ -#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ -#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ -#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ -#define E1000_VFRE 0x00C8C /* VF Receive Enables */ -#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ -#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ -#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ -#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ -#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ -#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ -#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ -#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ -#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ -#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ -#define E1000_MDFB 0x03558 /* Malicious Driver free block */ -#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ -#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ -#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ -#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ -#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ +#define E1000_SWPBS 0x03004 /* Switch Packet Buffer Size - RW */ +#define E1000_MBVFICR 0x00C80 /* Mailbox VF Cause - RWC */ +#define E1000_MBVFIMR 0x00C84 /* Mailbox VF int Mask - RW */ +#define E1000_VFLRE 0x00C88 /* VF Register Events - RWC */ +#define E1000_VFRE 0x00C8C /* VF Receive Enables */ +#define E1000_VFTE 0x00C90 /* VF Transmit Enables */ +#define E1000_QDE 0x02408 /* Queue Drop Enable - RW */ +#define E1000_DTXSWC 0x03500 /* DMA Tx Switch Control - RW */ +#define E1000_WVBR 0x03554 /* VM Wrong Behavior - RWS */ +#define E1000_RPLOLR 0x05AF0 /* Replication Offload - RW */ +#define E1000_UTA 0x0A000 /* Unicast Table Array - RW */ +#define E1000_IOVTCL 0x05BBC /* IOV Control Register */ +#define E1000_VMRCTL 0X05D80 /* Virtual Mirror Rule Control */ +#define E1000_VMRVLAN 0x05D90 /* Virtual Mirror Rule VLAN */ +#define E1000_VMRVM 0x05DA0 /* Virtual Mirror Rule VM */ +#define E1000_MDFB 0x03558 /* Malicious Driver free block */ +#define E1000_LVMMC 0x03548 /* Last VM Misbehavior cause */ +#define E1000_TXSWC 0x05ACC /* Tx Switch Control */ +#define E1000_SCCRL 0x05DB0 /* Storm Control Control */ +#define E1000_BSCTRH 0x05DB8 /* Broadcast Storm Control Threshold */ +#define E1000_MSCTRH 0x05DBC /* Multicast Storm Control Threshold */ /* These act per VF so an array friendly macro is used */ -#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) -#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) -#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) -#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) -#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) +#define E1000_V2PMAILBOX(_n) (0x00C40 + (4 * (_n))) +#define E1000_P2VMAILBOX(_n) (0x00C00 + (4 * (_n))) +#define E1000_VMBMEM(_n) (0x00800 + (64 * (_n))) +#define E1000_VFVMBMEM(_n) (0x00800 + (_n)) +#define E1000_VMOLR(_n) (0x05AD0 + (4 * (_n))) /* VLAN Virtual Machine Filter - RW */ #define E1000_VLVF(_n) (0x05D00 + (4 * (_n))) -#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) -#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ +#define E1000_VMVIR(_n) (0x03700 + (4 * (_n))) +#define E1000_DVMOLR(_n) (0x0C038 + (0x40 * (_n))) /* DMA VM offload */ #define E1000_VTCTRL(_n) (0x10000 + (0x100 * (_n))) /* VT Control */ -#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ -#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ -#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ -#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ -#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ -#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ -#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ -#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ -#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ -#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ -#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ -#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ +#define E1000_TSYNCRXCTL 0x0B620 /* Rx Time Sync Control register - RW */ +#define E1000_TSYNCTXCTL 0x0B614 /* Tx Time Sync Control register - RW */ +#define E1000_TSYNCRXCFG 0x05F50 /* Time Sync Rx Configuration - RW */ +#define E1000_RXSTMPL 0x0B624 /* Rx timestamp Low - RO */ +#define E1000_RXSTMPH 0x0B628 /* Rx timestamp High - RO */ +#define E1000_RXSATRL 0x0B62C /* Rx timestamp attribute low - RO */ +#define E1000_RXSATRH 0x0B630 /* Rx timestamp attribute high - RO */ +#define E1000_TXSTMPL 0x0B618 /* Tx timestamp value Low - RO */ +#define E1000_TXSTMPH 0x0B61C /* Tx timestamp value High - RO */ +#define E1000_SYSTIML 0x0B600 /* System time register Low - RO */ +#define E1000_SYSTIMH 0x0B604 /* System time register High - RO */ +#define E1000_TIMINCA 0x0B608 /* Increment attributes register - RW */ #define E1000_TIMADJL 0x0B60C /* Time sync time adjustment offset Low - RW */ #define E1000_TIMADJH 0x0B610 /* Time sync time adjustment offset High - RW */ -#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ -#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ +#define E1000_TSAUXC 0x0B640 /* Timesync Auxiliary Control register */ +#define E1000_SYSTIMR 0x0B6F8 /* System time register Residue */ #define E1000_TSICR 0x0B66C /* Interrupt Cause Register */ #define E1000_TSIM 0x0B674 /* Interrupt Mask Register */ #define E1000_RXMTRL 0x0B634 /* Time sync Rx EtherType and Msg Type - RW */ #define E1000_RXUDP 0x0B638 /* Time Sync Rx UDP Port - RW */ /* Filtering Registers */ -#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ -#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ -#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ -#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ -#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ -#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ -#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ - -#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ -#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ -#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ -#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ -#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ +#define E1000_SAQF(_n) (0x05980 + (4 * (_n))) /* Source Address Queue Fltr */ +#define E1000_DAQF(_n) (0x059A0 + (4 * (_n))) /* Dest Address Queue Fltr */ +#define E1000_SPQF(_n) (0x059C0 + (4 * (_n))) /* Source Port Queue Fltr */ +#define E1000_FTQF(_n) (0x059E0 + (4 * (_n))) /* 5-tuple Queue Fltr */ +#define E1000_TTQF(_n) (0x059E0 + (4 * (_n))) /* 2-tuple Queue Fltr */ +#define E1000_SYNQF(_n) (0x055FC + (4 * (_n))) /* SYN Packet Queue Fltr */ +#define E1000_ETQF(_n) (0x05CB0 + (4 * (_n))) /* EType Queue Fltr */ + +#define E1000_RTTDCS 0x3600 /* Reedtown Tx Desc plane control and status */ +#define E1000_RTTPCS 0x3474 /* Reedtown Tx Packet Plane control and status */ +#define E1000_RTRPCS 0x2474 /* Rx packet plane control and status */ +#define E1000_RTRUP2TC 0x05AC4 /* Rx User Priority to Traffic Class */ +#define E1000_RTTUP2TC 0x0418 /* Transmit User Priority to Traffic Class */ /* Tx Desc plane TC Rate-scheduler config */ #define E1000_RTTDTCRC(_n) (0x3610 + ((_n) * 4)) /* Tx Packet plane TC Rate-Scheduler Config */ @@ -627,55 +627,55 @@ POSSIBILITY OF SUCH DAMAGE. #define E1000_RTTDVMRM(_n) (0x3670 + ((_n) * 4)) /* Tx BCN Rate-Scheduler MMW */ #define E1000_RTTBCNRM(_n) (0x3690 + ((_n) * 4)) -#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ -#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ -#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ -#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ -#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ -#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ -#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ -#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ -#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ -#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ -#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ -#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ -#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ -#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ +#define E1000_RTTDQSEL 0x3604 /* Tx Desc Plane Queue Select */ +#define E1000_RTTDVMRC 0x3608 /* Tx Desc Plane VM Rate-Scheduler Config */ +#define E1000_RTTDVMRS 0x360C /* Tx Desc Plane VM Rate-Scheduler Status */ +#define E1000_RTTBCNRC 0x36B0 /* Tx BCN Rate-Scheduler Config */ +#define E1000_RTTBCNRS 0x36B4 /* Tx BCN Rate-Scheduler Status */ +#define E1000_RTTBCNCR 0xB200 /* Tx BCN Control Register */ +#define E1000_RTTBCNTG 0x35A4 /* Tx BCN Tagging */ +#define E1000_RTTBCNCP 0xB208 /* Tx BCN Congestion point */ +#define E1000_RTRBCNCR 0xB20C /* Rx BCN Control Register */ +#define E1000_RTTBCNRD 0x36B8 /* Tx BCN Rate Drift */ +#define E1000_PFCTOP 0x1080 /* Priority Flow Control Type and Opcode */ +#define E1000_RTTBCNIDX 0xB204 /* Tx BCN Congestion Point */ +#define E1000_RTTBCNACH 0x0B214 /* Tx BCN Control High */ +#define E1000_RTTBCNACL 0x0B210 /* Tx BCN Control Low */ /* DMA Coalescing registers */ -#define E1000_DMACR 0x02508 /* Control Register */ -#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ -#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ -#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ -#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ -#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ -#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ +#define E1000_DMACR 0x02508 /* Control Register */ +#define E1000_DMCTXTH 0x03550 /* Transmit Threshold */ +#define E1000_DMCTLX 0x02514 /* Time to Lx Request */ +#define E1000_DMCRTRH 0x05DD0 /* Receive Packet Rate Threshold */ +#define E1000_DMCCNT 0x05DD4 /* Current Rx Count */ +#define E1000_FCRTC 0x02170 /* Flow Control Rx high watermark */ +#define E1000_PCIEMISC 0x05BB8 /* PCIE misc config register */ /* PCIe Parity Status Register */ -#define E1000_PCIEERRSTS 0x05BA8 +#define E1000_PCIEERRSTS 0x05BA8 -#define E1000_PROXYS 0x5F64 /* Proxying Status */ -#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ +#define E1000_PROXYS 0x5F64 /* Proxying Status */ +#define E1000_PROXYFC 0x5F60 /* Proxying Filter Control */ /* Thermal sensor configuration and status registers */ -#define E1000_THMJT 0x08100 /* Junction Temperature */ -#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ -#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ -#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ -#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ +#define E1000_THMJT 0x08100 /* Junction Temperature */ +#define E1000_THLOWTC 0x08104 /* Low Threshold Control */ +#define E1000_THMIDTC 0x08108 /* Mid Threshold Control */ +#define E1000_THHIGHTC 0x0810C /* High Threshold Control */ +#define E1000_THSTAT 0x08110 /* Thermal Sensor Status */ /* Energy Efficient Ethernet "EEE" registers */ -#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ -#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ -#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ -#define E1000_EEE_SU 0x0E34 /* EEE Setup */ -#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ -#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ +#define E1000_IPCNFG 0x0E38 /* Internal PHY Configuration */ +#define E1000_LTRC 0x01A0 /* Latency Tolerance Reporting Control */ +#define E1000_EEER 0x0E30 /* Energy Efficient Ethernet "EEE"*/ +#define E1000_EEE_SU 0x0E34 /* EEE Setup */ +#define E1000_TLPIC 0x4148 /* EEE Tx LPI Count - TLPIC */ +#define E1000_RLPIC 0x414C /* EEE Rx LPI Count - RLPIC */ /* OS2BMC Registers */ -#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ -#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ -#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ -#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ +#define E1000_B2OSPC 0x08FE0 /* BMC2OS packets sent by BMC */ +#define E1000_B2OGPRC 0x04158 /* BMC2OS packets received by host */ +#define E1000_O2BGPTC 0x08FE4 /* OS2BMC packets received by BMC */ +#define E1000_O2BSPC 0x0415C /* OS2BMC packets transmitted by host */ diff --git a/lib/librte_pmd_e1000/e1000/e1000_vf.c b/lib/librte_pmd_e1000/e1000/e1000_vf.c index 86c67a6342..4d8f58b1ad 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_vf.c +++ b/lib/librte_pmd_e1000/e1000/e1000_vf.c @@ -35,21 +35,21 @@ POSSIBILITY OF SUCH DAMAGE. #include "e1000_api.h" -STATIC s32 e1000_init_phy_params_vf(struct e1000_hw *hw); -STATIC s32 e1000_init_nvm_params_vf(struct e1000_hw *hw); -STATIC void e1000_release_vf(struct e1000_hw *hw); -STATIC s32 e1000_acquire_vf(struct e1000_hw *hw); -STATIC s32 e1000_setup_link_vf(struct e1000_hw *hw); -STATIC s32 e1000_get_bus_info_pcie_vf(struct e1000_hw *hw); -STATIC s32 e1000_init_mac_params_vf(struct e1000_hw *hw); -STATIC s32 e1000_check_for_link_vf(struct e1000_hw *hw); -STATIC s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, - u16 *duplex); -STATIC s32 e1000_init_hw_vf(struct e1000_hw *hw); -STATIC s32 e1000_reset_hw_vf(struct e1000_hw *hw); -STATIC void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, u32); -STATIC void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); -STATIC s32 e1000_read_mac_addr_vf(struct e1000_hw *); +STATIC s32 e1000_init_phy_params_vf(struct e1000_hw *hw); +STATIC s32 e1000_init_nvm_params_vf(struct e1000_hw *hw); +STATIC void e1000_release_vf(struct e1000_hw *hw); +STATIC s32 e1000_acquire_vf(struct e1000_hw *hw); +STATIC s32 e1000_setup_link_vf(struct e1000_hw *hw); +STATIC s32 e1000_get_bus_info_pcie_vf(struct e1000_hw *hw); +STATIC s32 e1000_init_mac_params_vf(struct e1000_hw *hw); +STATIC s32 e1000_check_for_link_vf(struct e1000_hw *hw); +STATIC s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +STATIC s32 e1000_init_hw_vf(struct e1000_hw *hw); +STATIC s32 e1000_reset_hw_vf(struct e1000_hw *hw); +STATIC void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, u32); +STATIC void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); +STATIC s32 e1000_read_mac_addr_vf(struct e1000_hw *); /** * e1000_init_phy_params_vf - Inits PHY params @@ -218,7 +218,7 @@ STATIC s32 e1000_get_bus_info_pcie_vf(struct e1000_hw *hw) * the status register's data which is often stale and inaccurate. **/ STATIC s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, - u16 *duplex) + u16 *duplex) { s32 status; @@ -287,7 +287,7 @@ STATIC s32 e1000_reset_hw_vf(struct e1000_hw *hw) ret_val = mbx->ops.read_posted(hw, msgbuf, 3, 0); if (!ret_val) { if (msgbuf[0] == (E1000_VF_RESET | - E1000_VT_MSGTYPE_ACK)) + E1000_VT_MSGTYPE_ACK)) memcpy(hw->mac.perm_addr, addr, 6); else ret_val = -E1000_ERR_MAC_INIT; @@ -368,7 +368,7 @@ STATIC u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr) bit_shift++; hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | - (((u16) mc_addr[5]) << bit_shift))); + (((u16) mc_addr[5]) << bit_shift))); return hash_value; } @@ -394,7 +394,7 @@ static void e1000_write_msg_read_ack(struct e1000_hw *hw, * The caller must have a packed mc_addr_list of multicast addresses. **/ void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, - u8 *mc_addr_list, u32 mc_addr_count) + u8 *mc_addr_list, u32 mc_addr_count) { u32 msgbuf[E1000_VFMAILBOX_SIZE]; u16 *hash_list = (u16 *)&msgbuf[1]; diff --git a/lib/librte_pmd_e1000/e1000/e1000_vf.h b/lib/librte_pmd_e1000/e1000/e1000_vf.h index 716bb73000..e8669a5be1 100644 --- a/lib/librte_pmd_e1000/e1000/e1000_vf.h +++ b/lib/librte_pmd_e1000/e1000/e1000_vf.h @@ -40,8 +40,8 @@ POSSIBILITY OF SUCH DAMAGE. struct e1000_hw; -#define E1000_DEV_ID_82576_VF 0x10CA -#define E1000_DEV_ID_I350_VF 0x1520 +#define E1000_DEV_ID_82576_VF 0x10CA +#define E1000_DEV_ID_I350_VF 0x1520 #define E1000_VF_INIT_TIMEOUT 200 /* Num of retries to clear RSTI */ @@ -50,24 +50,24 @@ struct e1000_hw; #define E1000_RXDCTL_QUEUE_ENABLE 0x02000000 /* Ena specific Rx Queue */ /* SRRCTL bit definitions */ -#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ -#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 -#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ -#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 -#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 -#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 -#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 +#define E1000_SRRCTL_BSIZEPKT_SHIFT 10 /* Shift _right_ */ +#define E1000_SRRCTL_BSIZEHDRSIZE_MASK 0x00000F00 +#define E1000_SRRCTL_BSIZEHDRSIZE_SHIFT 2 /* Shift _left_ */ +#define E1000_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define E1000_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define E1000_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION 0x06000000 #define E1000_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 -#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 -#define E1000_SRRCTL_DROP_EN 0x80000000 +#define E1000_SRRCTL_DESCTYPE_MASK 0x0E000000 +#define E1000_SRRCTL_DROP_EN 0x80000000 -#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F -#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 +#define E1000_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define E1000_SRRCTL_BSIZEHDR_MASK 0x00003F00 /* Interrupt Defines */ -#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ -#define E1000_EITR(_n) (0x01680 + ((_n) << 2)) +#define E1000_EICR 0x01580 /* Ext. Interrupt Cause Read - R/clr */ +#define E1000_EITR(_n) (0x01680 + ((_n) << 2)) #define E1000_EICS 0x01520 /* Ext. Intr Cause Set -W0 */ #define E1000_EIMS 0x01524 /* Ext. Intr Mask Set/Read -RW */ #define E1000_EIMC 0x01528 /* Ext. Intr Mask Clear -WO */ @@ -75,13 +75,13 @@ struct e1000_hw; #define E1000_EIAM 0x01530 /* Ext. Intr Ack Auto Clear Mask -RW */ #define E1000_IVAR0 0x01700 /* Intr Vector Alloc (array) -RW */ #define E1000_IVAR_MISC 0x01740 /* IVAR for "other" causes -RW */ -#define E1000_IVAR_VALID 0x80 +#define E1000_IVAR_VALID 0x80 /* Receive Descriptor - Advanced */ union e1000_adv_rx_desc { struct { - u64 pkt_addr; /* Packet buffer address */ - u64 hdr_addr; /* Header buffer address */ + u64 pkt_addr; /* Packet buffer address */ + u64 hdr_addr; /* Header buffer address */ } read; struct { struct { @@ -95,23 +95,23 @@ union e1000_adv_rx_desc { } hs_rss; } lo_dword; union { - u32 rss; /* RSS Hash */ + u32 rss; /* RSS Hash */ struct { - u16 ip_id; /* IP id */ - u16 csum; /* Packet Checksum */ + u16 ip_id; /* IP id */ + u16 csum; /* Packet Checksum */ } csum_ip; } hi_dword; } lower; struct { - u32 status_error; /* ext status/error */ - u16 length; /* Packet length */ - u16 vlan; /* VLAN tag */ + u32 status_error; /* ext status/error */ + u16 length; /* Packet length */ + u16 vlan; /* VLAN tag */ } upper; } wb; /* writeback */ }; -#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 -#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 +#define E1000_RXDADV_HDRBUFLEN_MASK 0x7FE0 +#define E1000_RXDADV_HDRBUFLEN_SHIFT 5 /* Transmit Descriptor - Advanced */ union e1000_adv_tx_desc { @@ -128,15 +128,15 @@ union e1000_adv_tx_desc { }; /* Adv Transmit Descriptor Config Masks */ -#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ -#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ -#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ -#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ -#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ -#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ -#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ -#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ -#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ +#define E1000_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Descriptor */ +#define E1000_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define E1000_ADVTXD_DCMD_EOP 0x01000000 /* End of Packet */ +#define E1000_ADVTXD_DCMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define E1000_ADVTXD_DCMD_RS 0x08000000 /* Report Status */ +#define E1000_ADVTXD_DCMD_DEXT 0x20000000 /* Descriptor extension (1=Adv) */ +#define E1000_ADVTXD_DCMD_VLE 0x40000000 /* VLAN pkt enable */ +#define E1000_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define E1000_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ /* Context descriptors */ struct e1000_adv_tx_context_desc { @@ -146,11 +146,11 @@ struct e1000_adv_tx_context_desc { u32 mss_l4len_idx; }; -#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ -#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ -#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ -#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ -#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ +#define E1000_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define E1000_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define E1000_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define E1000_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define E1000_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ enum e1000_mac_type { e1000_undefined = 0, diff --git a/lib/librte_pmd_e1000/e1000_ethdev.h b/lib/librte_pmd_e1000/e1000_ethdev.h index 0ebd7cc353..8ddbf73bf0 100644 --- a/lib/librte_pmd_e1000/e1000_ethdev.h +++ b/lib/librte_pmd_e1000/e1000_ethdev.h @@ -46,7 +46,7 @@ #define E1000_ADVTXD_POPTS_IXSM 0x00000100 /* IP Checksum offload request */ #define E1000_ADVTXD_TUCMD_L4T_RSV 0x00001800 /* L4 Packet TYPE of Reserved */ #define E1000_RXD_STAT_TMST 0x10000 /* Timestamped Packet indication */ -#define E1000_RXD_ERR_CKSUM_BIT 29 +#define E1000_RXD_ERR_CKSUM_BIT 29 #define E1000_RXD_ERR_CKSUM_MSK 3 #define E1000_ADVTXD_MACLEN_SHIFT 9 /* Bit shift for l2_len */ #define E1000_CTRL_EXT_EXTEND_VLAN (1<<26) /* EXTENDED VLAN */ diff --git a/lib/librte_pmd_e1000/igb_ethdev.c b/lib/librte_pmd_e1000/igb_ethdev.c index 71b6ac0614..b1ec1fd66e 100644 --- a/lib/librte_pmd_e1000/igb_ethdev.c +++ b/lib/librte_pmd_e1000/igb_ethdev.c @@ -283,7 +283,7 @@ eth_igb_dev_init(__attribute__((unused)) struct eth_driver *eth_drv, struct e1000_hw *hw = E1000_DEV_PRIVATE_TO_HW(eth_dev->data->dev_private); struct e1000_vfta * shadow_vfta = - E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private); + E1000_DEV_PRIVATE_TO_VFTA(eth_dev->data->dev_private); pci_dev = eth_dev->pci_dev; eth_dev->dev_ops = ð_igb_ops; diff --git a/lib/librte_pmd_e1000/igb_rxtx.c b/lib/librte_pmd_e1000/igb_rxtx.c index 1dcf80125a..46f6f29d93 100644 --- a/lib/librte_pmd_e1000/igb_rxtx.c +++ b/lib/librte_pmd_e1000/igb_rxtx.c @@ -88,7 +88,7 @@ rte_rxmbuf_alloc(struct rte_mempool *mp) #define RTE_MBUF_DATA_DMA_ADDR(mb) \ (uint64_t) ((mb)->buf_physaddr + \ (uint64_t) ((char *)((mb)->pkt.data) - \ - (char *)(mb)->buf_addr)) + (char *)(mb)->buf_addr)) #define RTE_MBUF_DATA_DMA_ADDR_DEFAULT(mb) \ (uint64_t) ((mb)->buf_physaddr + RTE_PKTMBUF_HEADROOM) @@ -161,7 +161,7 @@ struct igb_tx_queue { volatile uint32_t *tdt_reg_addr; /**< Address of TDT register. */ uint32_t txd_type; /**< Device-specific TXD type */ uint16_t nb_tx_desc; /**< number of TX descriptors. */ - uint16_t tx_tail; /**< Current value of TDT register. */ + uint16_t tx_tail; /**< Current value of TDT register. */ uint16_t tx_head; /**< Index of first used TX descriptor. */ uint16_t queue_id; /**< TX queue index. */ @@ -1099,9 +1099,9 @@ static void igb_tx_queue_release(struct igb_tx_queue *txq) { if (txq != NULL) { - igb_tx_queue_release_mbufs(txq); - rte_free(txq->sw_ring); - rte_free(txq); + igb_tx_queue_release_mbufs(txq); + rte_free(txq->sw_ring); + rte_free(txq); } } @@ -1270,9 +1270,9 @@ static void igb_rx_queue_release(struct igb_rx_queue *rxq) { if (rxq != NULL) { - igb_rx_queue_release_mbufs(rxq); - rte_free(rxq->sw_ring); - rte_free(rxq); + igb_rx_queue_release_mbufs(rxq); + rte_free(rxq->sw_ring); + rte_free(rxq); } } @@ -1389,17 +1389,17 @@ igb_dev_clear_queues(struct rte_eth_dev *dev) for (i = 0; i < dev->data->nb_tx_queues; i++) { txq = dev->data->tx_queues[i]; if (txq != NULL) { - igb_tx_queue_release_mbufs(txq); - igb_reset_tx_queue(txq, dev); - } + igb_tx_queue_release_mbufs(txq); + igb_reset_tx_queue(txq, dev); + } } for (i = 0; i < dev->data->nb_rx_queues; i++) { rxq = dev->data->rx_queues[i]; if (rxq != NULL) { - igb_rx_queue_release_mbufs(rxq); - igb_reset_rx_queue(rxq); - } + igb_rx_queue_release_mbufs(rxq); + igb_reset_rx_queue(rxq); + } } }