From: Akhil Goyal Date: Mon, 9 Oct 2017 14:21:42 +0000 (+0530) Subject: doc: add NXP DPAA SEC X-Git-Tag: spdx-start~1396 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=bf551c96752e56036096eea68f074245fc5fdccb;p=dpdk.git doc: add NXP DPAA SEC Signed-off-by: Hemant Agrawal Signed-off-by: Akhil Goyal Acked-by: John McNamara --- diff --git a/MAINTAINERS b/MAINTAINERS index 487ca2a117..206afda4bf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -580,6 +580,8 @@ NXP DPAA_SEC M: Akhil Goyal M: Hemant Agrawal F: drivers/crypto/dpaa_sec/ +F: doc/guides/cryptodevs/dpaa_sec.rst +F: doc/guides/cryptodevs/features/dpaa_sec.ini NXP DPAA2_SEC M: Akhil Goyal diff --git a/doc/guides/cryptodevs/dpaa_sec.rst b/doc/guides/cryptodevs/dpaa_sec.rst new file mode 100644 index 0000000000..d3438cc306 --- /dev/null +++ b/doc/guides/cryptodevs/dpaa_sec.rst @@ -0,0 +1,182 @@ +.. BSD LICENSE + Copyright 2017 NXP. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of NXP nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + + +NXP DPAA CAAM (DPAA_SEC) +======================== + +The DPAA_SEC PMD provides poll mode crypto driver support for NXP DPAA CAAM +hardware accelerator. + +Architecture +------------ + +SEC is the SOC's security engine, which serves as NXP's latest cryptographic +acceleration and offloading hardware. It combines functions previously +implemented in separate modules to create a modular and scalable acceleration +and assurance engine. It also implements block encryption algorithms, stream +cipher algorithms, hashing algorithms, public key algorithms, run-time +integrity checking, and a hardware random number generator. SEC performs +higher-level cryptographic operations than previous NXP cryptographic +accelerators. This provides significant improvement to system level performance. + +DPAA_SEC is one of the hardware resource in DPAA Architecture. More information +on DPAA Architecture is described in :ref:`dpaa_overview`. + +DPAA_SEC PMD is one of DPAA drivers which interacts with QBMAN to create, +configure and destroy the device instance using queue pair with CAAM portal. + +DPAA_SEC PMD also uses some of the other hardware resources like buffer pools, +queues, queue portals to store and to enqueue/dequeue data to the hardware SEC. + +Implementation +-------------- + +SEC provides platform assurance by working with SecMon, which is a companion +logic block that tracks the security state of the SOC. SEC is programmed by +means of descriptors (not to be confused with frame descriptors (FDs)) that +indicate the operations to be performed and link to the message and +associated data. SEC incorporates two DMA engines to fetch the descriptors, +read the message data, and write the results of the operations. The DMA +engine provides a scatter/gather capability so that SEC can read and write +data scattered in memory. SEC may be configured by means of software for +dynamic changes in byte ordering. The default configuration for this version +of SEC is little-endian mode. + +Features +-------- + +The DPAA PMD has support for: + +Cipher algorithms: + +* ``RTE_CRYPTO_CIPHER_3DES_CBC`` +* ``RTE_CRYPTO_CIPHER_AES128_CBC`` +* ``RTE_CRYPTO_CIPHER_AES192_CBC`` +* ``RTE_CRYPTO_CIPHER_AES256_CBC`` +* ``RTE_CRYPTO_CIPHER_AES128_CTR`` +* ``RTE_CRYPTO_CIPHER_AES192_CTR`` +* ``RTE_CRYPTO_CIPHER_AES256_CTR`` + +Hash algorithms: + +* ``RTE_CRYPTO_AUTH_SHA1_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA224_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA256_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA384_HMAC`` +* ``RTE_CRYPTO_AUTH_SHA512_HMAC`` +* ``RTE_CRYPTO_AUTH_MD5_HMAC`` + +AEAD algorithms: + +* ``RTE_CRYPTO_AEAD_AES_GCM`` + +Supported DPAA SoCs +-------------------- + +* LS1046A/LS1026A +* LS1043A/LS1023A + +Limitations +----------- + +* Chained mbufs are not supported. +* Hash followed by Cipher mode is not supported +* Only supports the session-oriented API implementation (session-less APIs are not supported). + +Prerequisites +------------- + +DPAA_SEC driver has similar pre-requisites as described in :ref:`dpaa_overview`. +The following dependencies are not part of DPDK and must be installed separately: + +* **NXP Linux SDK** + + NXP Linux software development kit (SDK) includes support for the family + of QorIQ® ARM-Architecture-based system on chip (SoC) processors + and corresponding boards. + + It includes the Linux board support packages (BSPs) for NXP SoCs, + a fully operational tool chain, kernel and board specific modules. + + SDK and related information can be obtained from: `NXP QorIQ SDK `_. + +* **DPDK Extras Scripts** + + DPAA based resources can be configured easily with the help of ready scripts + as provided in the DPDK Extras repository. + + `DPDK Extras Scripts `_. + +Currently supported by DPDK: + +* NXP SDK **2.0+**. +* Supported architectures: **arm64 LE**. + +* Follow the DPDK :ref:`Getting Started Guide for Linux ` to setup the basic DPDK environment. + +Pre-Installation Configuration +------------------------------ + +Config File Options +~~~~~~~~~~~~~~~~~~~ + +Basic DPAA config file options are described in :ref:`dpaa_overview`. +In addition to those, the following options can be modified in the ``config`` file +to enable DPAA_SEC PMD. + +Please note that enabling debugging options may affect system performance. + +* ``CONFIG_RTE_LIBRTE_PMD_DPAA_SEC`` (default ``n``) + By default it is only enabled in defconfig_arm64-dpaa-* config. + Toggle compilation of the ``librte_pmd_dpaa_sec`` driver. + +* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_INIT`` (default ``n``) + Toggle display of initialization related driver messages + +* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_DRIVER`` (default ``n``) + Toggle display of driver runtime messages + +* ``CONFIG_RTE_LIBRTE_DPAA_SEC_DEBUG_RX`` (default ``n``) + Toggle display of receive fast path run-time message + +* ``CONFIG_RTE_DPAA_SEC_PMD_MAX_NB_SESSIONS`` + By default it is set as 2048 in defconfig_arm64-dpaa-* config. + It indicates Number of sessions to create in the session memory pool + on a single DPAA SEC device. + +Installations +------------- +To compile the DPAA_SEC PMD for Linux arm64 gcc target, run the +following ``make`` command: + +.. code-block:: console + + cd + make config T=arm64-dpaa-linuxapp-gcc install diff --git a/doc/guides/cryptodevs/features/dpaa_sec.ini b/doc/guides/cryptodevs/features/dpaa_sec.ini new file mode 100644 index 0000000000..0e8f5b2a95 --- /dev/null +++ b/doc/guides/cryptodevs/features/dpaa_sec.ini @@ -0,0 +1,40 @@ +; +; Supported features of the 'dpaa_sec' crypto driver. +; +; Refer to default.ini for the full list of available PMD features. +; +[Features] +Symmetric crypto = Y +Sym operation chaining = Y +HW Accelerated = Y + +; +; Supported crypto algorithms of the 'dpaa_sec' crypto driver. +; +[Cipher] +AES CBC (128) = Y +AES CBC (192) = Y +AES CBC (256) = Y +AES CTR (128) = Y +AES CTR (192) = Y +AES CTR (256) = Y +3DES CBC = Y + +; +; Supported authentication algorithms of the 'dpaa_sec' crypto driver. +; +[Auth] +MD5 HMAC = Y +SHA1 HMAC = Y +SHA224 HMAC = Y +SHA256 HMAC = Y +SHA384 HMAC = Y +SHA512 HMAC = Y + +; +; Supported AEAD algorithms of the 'dpaa_sec' crypto driver. +; +[AEAD] +AES GCM (128) = Y +AES GCM (192) = Y +AES GCM (256) = Y diff --git a/doc/guides/cryptodevs/index.rst b/doc/guides/cryptodevs/index.rst index 361b82ddcc..3a39a2d334 100644 --- a/doc/guides/cryptodevs/index.rst +++ b/doc/guides/cryptodevs/index.rst @@ -40,6 +40,7 @@ Crypto Device Drivers aesni_gcm armv8 dpaa2_sec + dpaa_sec kasumi openssl null diff --git a/doc/guides/rel_notes/release_17_11.rst b/doc/guides/rel_notes/release_17_11.rst index 5ddc7ebdc5..092c3a16e7 100644 --- a/doc/guides/rel_notes/release_17_11.rst +++ b/doc/guides/rel_notes/release_17_11.rst @@ -110,6 +110,12 @@ New Features * DES CBC algorithm. * AES CCM algorithm. +* **Added NXP DPAA SEC crypto PMD.** + + A new "dpaa_sec" hardware based crypto PMD for NXP DPAA devices has been + added. See the "Crypto Device Drivers" document for more details on this + driver. + * **Add new benchmarking mode to dpdk-test-crypto-perf application.** Added new "PMD cyclecount" benchmark mode to dpdk-test-crypto-perf application diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst index d587c201a4..2b3a5b6216 100644 --- a/doc/guides/tools/cryptoperf.rst +++ b/doc/guides/tools/cryptoperf.rst @@ -190,6 +190,7 @@ The following are the appication command-line options: crypto_snow3g crypto_kasumi crypto_zuc + crypto_dpaa_sec crypto_dpaa2_sec crypto_armv8 crypto_scheduler