From: Stephen Hemminger Date: Wed, 10 Apr 2019 17:41:30 +0000 (-0700) Subject: app/testpmd: add ability to set Tx IP and UDP parameters X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=bf5b2126bf44;p=dpdk.git app/testpmd: add ability to set Tx IP and UDP parameters This patch changes what testpmd uses as IP addresses when run in transmit only mode. The old code was using 192.168.0.1 -> 192.168.0.2 but these addresses are reserved for private Internet by RFC 1918. The new code uses 192.18.0.1 and 192.18.0.2 which are on the subnet reserved for performance testing by RFC 2544. New command line option allows the user to pick any other src/dst address desired. Notice: this changes the default IP address for transmit only. It may cause some user who has hardcoded network addresses to report a regression. Signed-off-by: Stephen Hemminger Acked-by: Bernard Iremonger --- diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c index 7f18b3e748..41eb3ffa8a 100644 --- a/app/test-pmd/parameters.c +++ b/app/test-pmd/parameters.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -65,6 +66,7 @@ usage(char* progname) #ifdef RTE_LIBRTE_CMDLINE "--eth-peers-configfile= | " "--eth-peer=X,M:M:M:M:M:M | " + "--tx-ip=SRC,DST | --tx-udp=PORT | " #endif "--pkt-filter-mode= |" "--rss-ip | --rss-udp | " @@ -647,6 +649,8 @@ launch_args_parse(int argc, char** argv) { "mlockall", 0, 0, 0 }, { "no-mlockall", 0, 0, 0 }, { "mp-alloc", 1, 0, 0 }, + { "tx-ip", 1, 0, 0 }, + { "tx-udp", 1, 0, 0 }, { "noisy-tx-sw-buffer-size", 1, 0, 0 }, { "noisy-tx-sw-buffer-flushtime", 1, 0, 0 }, { "noisy-lkup-memory", 1, 0, 0 }, @@ -746,6 +750,55 @@ launch_args_parse(int argc, char** argv) nb_peer_eth_addrs++; } #endif + if (!strcmp(lgopts[opt_idx].name, "tx-ip")) { + struct in_addr in; + char *end; + + end = strchr(optarg, ','); + if (end == optarg || !end) + rte_exit(EXIT_FAILURE, + "Invalid tx-ip: %s", optarg); + + *end++ = 0; + if (inet_aton(optarg, &in) == 0) + rte_exit(EXIT_FAILURE, + "Invalid source IP address: %s\n", + optarg); + tx_ip_src_addr = rte_be_to_cpu_32(in.s_addr); + + if (inet_aton(end, &in) == 0) + rte_exit(EXIT_FAILURE, + "Invalid destination IP address: %s\n", + optarg); + tx_ip_dst_addr = rte_be_to_cpu_32(in.s_addr); + } + if (!strcmp(lgopts[opt_idx].name, "tx-udp")) { + char *end = NULL; + + errno = 0; + n = strtoul(optarg, &end, 10); + if (errno != 0 || end == optarg || + n > UINT16_MAX || + !(*end == '\0' || *end == ',')) + rte_exit(EXIT_FAILURE, + "Invalid UDP port: %s\n", + optarg); + tx_udp_src_port = n; + if (*end == ',') { + char *dst = end + 1; + + n = strtoul(dst, &end, 10); + if (errno != 0 || end == dst || + n > UINT16_MAX || *end) + rte_exit(EXIT_FAILURE, + "Invalid destination UDP port: %s\n", + dst); + tx_udp_dst_port = n; + } else { + tx_udp_dst_port = n; + } + + } if (!strcmp(lgopts[opt_idx].name, "nb-ports")) { n = atoi(optarg); if (n > 0 && n <= nb_ports) diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h index e2117e66ff..1d9b7a2458 100644 --- a/app/test-pmd/testpmd.h +++ b/app/test-pmd/testpmd.h @@ -445,6 +445,12 @@ extern int8_t tx_pthresh; extern int8_t tx_hthresh; extern int8_t tx_wthresh; +extern uint16_t tx_udp_src_port; +extern uint16_t tx_udp_dst_port; + +extern uint32_t tx_ip_src_addr; +extern uint32_t tx_ip_dst_addr; + extern struct fwd_config cur_fwd_config; extern struct fwd_engine *cur_fwd_eng; extern uint32_t retry_enabled; diff --git a/app/test-pmd/txonly.c b/app/test-pmd/txonly.c index 2d0e1a0279..fa8e0c0d33 100644 --- a/app/test-pmd/txonly.c +++ b/app/test-pmd/txonly.c @@ -40,11 +40,13 @@ #include "testpmd.h" -#define UDP_SRC_PORT 1024 -#define UDP_DST_PORT 1024 +/* use RFC863 Discard Protocol */ +uint16_t tx_udp_src_port = 9; +uint16_t tx_udp_dst_port = 9; -#define IP_SRC_ADDR ((192U << 24) | (168 << 16) | (0 << 8) | 1) -#define IP_DST_ADDR ((192U << 24) | (168 << 16) | (0 << 8) | 2) +/* use RFC5735 / RFC2544 reserved network test addresses */ +uint32_t tx_ip_src_addr = (192U << 24) | (18 << 16) | (0 << 8) | 1; +uint32_t tx_ip_dst_addr = (192U << 24) | (18 << 16) | (0 << 8) | 2; #define IP_DEFTTL 64 /* from RFC 1340. */ #define IP_VERSION 0x40 @@ -105,8 +107,8 @@ setup_pkt_udp_ip_headers(struct ipv4_hdr *ip_hdr, * Initialize UDP header. */ pkt_len = (uint16_t) (pkt_data_len + sizeof(struct udp_hdr)); - udp_hdr->src_port = rte_cpu_to_be_16(UDP_SRC_PORT); - udp_hdr->dst_port = rte_cpu_to_be_16(UDP_DST_PORT); + udp_hdr->src_port = rte_cpu_to_be_16(tx_udp_src_port); + udp_hdr->dst_port = rte_cpu_to_be_16(tx_udp_dst_port); udp_hdr->dgram_len = RTE_CPU_TO_BE_16(pkt_len); udp_hdr->dgram_cksum = 0; /* No UDP checksum. */ @@ -121,8 +123,8 @@ setup_pkt_udp_ip_headers(struct ipv4_hdr *ip_hdr, ip_hdr->next_proto_id = IPPROTO_UDP; ip_hdr->packet_id = 0; ip_hdr->total_length = RTE_CPU_TO_BE_16(pkt_len); - ip_hdr->src_addr = rte_cpu_to_be_32(IP_SRC_ADDR); - ip_hdr->dst_addr = rte_cpu_to_be_32(IP_DST_ADDR); + ip_hdr->src_addr = rte_cpu_to_be_32(tx_ip_src_addr); + ip_hdr->dst_addr = rte_cpu_to_be_32(tx_ip_dst_addr); /* * Compute IP header checksum. @@ -206,7 +208,7 @@ pkt_burst_prepare(struct rte_mbuf *pkt, struct rte_mempool *mbp, * packet generator for developer's quick performance * regression test. */ - addr = (IP_DST_ADDR | (ip_var++ << 8)) + rte_lcore_id(); + addr = (tx_ip_dst_addr | (ip_var++ << 8)) + rte_lcore_id(); ip_hdr->src_addr = rte_cpu_to_be_32(addr); } copy_buf_to_pkt(&pkt_udp_hdr, sizeof(pkt_udp_hdr), pkt, diff --git a/doc/guides/testpmd_app_ug/run_app.rst b/doc/guides/testpmd_app_ug/run_app.rst index 89a097d09a..fdf6ec7f90 100644 --- a/doc/guides/testpmd_app_ug/run_app.rst +++ b/doc/guides/testpmd_app_ug/run_app.rst @@ -121,12 +121,24 @@ The command line options are: XX:XX:XX:XX:XX:02 ... - * ``--eth-peer=N,XX:XX:XX:XX:XX:XX`` Set the MAC address ``XX:XX:XX:XX:XX:XX`` of the peer port N, where 0 <= N < ``CONFIG_RTE_MAX_ETHPORTS`` from the configuration file. +* ``--tx-ip=SRC,DST`` + + Set the source and destination IP address used when doing transmit only test. + The defaults address values are source 192.18.0.1 and + destination 192.18.0.2. These are special purpose addresses + reserved for benchmarking (RFC 2544). + +* ``--tx-udp=SRC[,DST]`` + + Set the source and destination UDP port number for transmit test only test. + The default port is the port 9 which is defined for the discard protocol + (RFC 863). + * ``--pkt-filter-mode=mode`` Set Flow Director mode where mode is either ``none`` (the default), ``signature`` or ``perfect``.