From: Liron Himi Date: Wed, 27 Jan 2021 16:09:27 +0000 (+0200) Subject: net/mvpp2: support DSA mode X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c2b5ae61c07e747dae3cbf067087a783b69e3987;p=dpdk.git net/mvpp2: support DSA mode Extend the config file with 'dsa-mode' field. Currently 'eth' (default) and 'dsa' headers are supported. Signed-off-by: Liron Himi --- diff --git a/doc/guides/nics/mvpp2.rst b/doc/guides/nics/mvpp2.rst index e1246efae1..324a1702aa 100644 --- a/doc/guides/nics/mvpp2.rst +++ b/doc/guides/nics/mvpp2.rst @@ -40,7 +40,7 @@ Features of the MVPP2 PMD are: - :ref:`Extended stats ` - RX flow control - Scattered TX frames -- :ref:`QoS ` +- :ref:`QoS ` - :ref:`Flow API ` - :ref:`Traffic metering and policing ` - :ref:`Traffic Management API ` @@ -188,12 +188,12 @@ MVPP2 PMD supports the following extended statistics: - ``tx_errors``: number of TX MAC errors -.. _qossupport: +.. _extconf: -QoS Configuration ------------------ +External Configuration +---------------------- -QoS configuration is done through external configuration file. Path to the +Several driver configuration (e.g. QoS) can be done through external configuration file. Path to the file must be given as `cfg` in driver's vdev parameter list. Configuration syntax @@ -209,6 +209,7 @@ Configuration syntax cbs = [port default] + dsa_mode = default_tc = mapping_priority = @@ -241,6 +242,8 @@ Where: - ````: DPDK Port number (0..n). +- ````: Indicate what is the dsa header mode (`none`, `dsa`, or `ext_dsa`). + - ````: Default traffic class (e.g. 0) - ````: QoS priority for mapping (`ip`, `vlan`, `ip/vlan` or `vlan/ip`). @@ -537,7 +540,7 @@ MVPP2 PMD supports DPDK traffic metering and policing that allows the following: For an additional description please refer to DPDK :doc:`Traffic Metering and Policing API <../prog_guide/traffic_metering_and_policing>`. -The policer objects defined by this feature can work with the default policer defined via config file as described in :ref:`QoS Support `. +The policer objects defined by this feature can work with the default policer defined via config file as described in :ref:`QoS Support `. Limitations ~~~~~~~~~~~ diff --git a/drivers/net/mvpp2/mrvl_ethdev.c b/drivers/net/mvpp2/mrvl_ethdev.c index 43dd4c4c3f..6448f44f99 100644 --- a/drivers/net/mvpp2/mrvl_ethdev.c +++ b/drivers/net/mvpp2/mrvl_ethdev.c @@ -689,6 +689,10 @@ mrvl_dev_start(struct rte_eth_dev *dev) snprintf(match, sizeof(match), "ppio-%d:%d", priv->pp_id, priv->ppio_id); priv->ppio_params.match = match; + priv->ppio_params.eth_start_hdr = PP2_PPIO_HDR_ETH; + if (mrvl_qos_cfg) + priv->ppio_params.eth_start_hdr = + mrvl_qos_cfg->port[dev->data->port_id].eth_start_hdr; /* * Calculate the minimum bpool size for refill feature as follows: diff --git a/drivers/net/mvpp2/mrvl_qos.c b/drivers/net/mvpp2/mrvl_qos.c index 7fd970309e..976cb06a84 100644 --- a/drivers/net/mvpp2/mrvl_qos.c +++ b/drivers/net/mvpp2/mrvl_qos.c @@ -19,6 +19,10 @@ /* Parsing tokens. Defined conveniently, so that any correction is easy. */ #define MRVL_TOK_DEFAULT "default" +#define MRVL_TOK_DSA_MODE "dsa_mode" +#define MRVL_TOK_DSA_MODE_NONE "none" +#define MRVL_TOK_DSA_MODE_DSA "dsa" +#define MRVL_TOK_DSA_MODE_EXT_DSA "ext_dsa" #define MRVL_TOK_DEFAULT_TC "default_tc" #define MRVL_TOK_DSCP "dscp" #define MRVL_TOK_MAPPING_PRIORITY "mapping_priority" @@ -494,16 +498,19 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path, const char *entry; char sec_name[32]; - if (file == NULL) - rte_exit(EXIT_FAILURE, "Cannot load configuration %s\n", path); + if (file == NULL) { + MRVL_LOG(ERR, "Cannot load configuration %s\n", path); + return -1; + } /* Create configuration. This is never accessed on the fast path, * so we can ignore socket. */ *cfg = rte_zmalloc("mrvl_qos_cfg", sizeof(struct mrvl_qos_cfg), 0); - if (*cfg == NULL) - rte_exit(EXIT_FAILURE, "Cannot allocate configuration %s\n", - path); + if (*cfg == NULL) { + MRVL_LOG(ERR, "Cannot allocate configuration %s\n", path); + return -1; + } n = rte_cfgfile_num_sections(file, MRVL_TOK_PORT, sizeof(MRVL_TOK_PORT) - 1); @@ -528,6 +535,31 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path, continue; } + entry = rte_cfgfile_get_entry(file, sec_name, + MRVL_TOK_DSA_MODE); + if (entry) { + if (!strncmp(entry, MRVL_TOK_DSA_MODE_NONE, + sizeof(MRVL_TOK_DSA_MODE_NONE))) + (*cfg)->port[n].eth_start_hdr = + PP2_PPIO_HDR_ETH; + else if (!strncmp(entry, MRVL_TOK_DSA_MODE_DSA, + sizeof(MRVL_TOK_DSA_MODE_DSA))) + (*cfg)->port[n].eth_start_hdr = + PP2_PPIO_HDR_ETH_DSA; + else if (!strncmp(entry, MRVL_TOK_DSA_MODE_EXT_DSA, + sizeof(MRVL_TOK_DSA_MODE_EXT_DSA))) { + (*cfg)->port[n].eth_start_hdr = + PP2_PPIO_HDR_ETH_EXT_DSA; + } else { + MRVL_LOG(ERR, + "Error in parsing %s value (%s)!\n", + MRVL_TOK_DSA_MODE, entry); + return -1; + } + } else { + (*cfg)->port[n].eth_start_hdr = PP2_PPIO_HDR_ETH; + } + /* * Read per-port rate limiting. Setting that will * disable per-queue rate limiting. @@ -575,13 +607,15 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path, (*cfg)->port[n].mapping_priority = PP2_CLS_QOS_TBL_IP_PRI; else if (!strncmp(entry, MRVL_TOK_VLAN, - sizeof(MRVL_TOK_VLAN))) + sizeof(MRVL_TOK_VLAN))) { (*cfg)->port[n].mapping_priority = PP2_CLS_QOS_TBL_VLAN_PRI; - else - rte_exit(EXIT_FAILURE, + } else { + MRVL_LOG(ERR, "Error in parsing %s value (%s)!\n", MRVL_TOK_MAPPING_PRIORITY, entry); + return -1; + } } else { (*cfg)->port[n].mapping_priority = PP2_CLS_QOS_TBL_VLAN_IP_PRI; @@ -604,18 +638,22 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path, for (i = 0; i < MRVL_PP2_RXQ_MAX; ++i) { ret = get_outq_cfg(file, n, i, *cfg); - if (ret < 0) - rte_exit(EXIT_FAILURE, + if (ret < 0) { + MRVL_LOG(ERR, "Error %d parsing port %d outq %d!\n", ret, n, i); + return -1; + } } for (i = 0; i < MRVL_PP2_TC_MAX; ++i) { ret = parse_tc_cfg(file, n, i, *cfg); - if (ret < 0) - rte_exit(EXIT_FAILURE, + if (ret < 0) { + MRVL_LOG(ERR, "Error %d parsing port %d tc %d!\n", ret, n, i); + return -1; + } } entry = rte_cfgfile_get_entry(file, sec_name, @@ -628,7 +666,8 @@ mrvl_get_qoscfg(const char *key __rte_unused, const char *path, } else { if ((*cfg)->port[n].use_global_defaults == 0) { MRVL_LOG(ERR, - "Default Traffic Class required in custom configuration!"); + "Default Traffic Class required in " + "custom configuration!"); return -1; } } diff --git a/drivers/net/mvpp2/mrvl_qos.h b/drivers/net/mvpp2/mrvl_qos.h index f03e7731c6..0934752cfe 100644 --- a/drivers/net/mvpp2/mrvl_qos.h +++ b/drivers/net/mvpp2/mrvl_qos.h @@ -20,6 +20,7 @@ /* QoS config. */ struct mrvl_qos_cfg { struct port_cfg { + enum pp2_ppio_eth_start_hdr eth_start_hdr; int rate_limit_enable; struct pp2_ppio_rate_limit_params rate_limit_params; struct {