From: Guinan Sun Date: Mon, 6 Jul 2020 08:12:14 +0000 (+0000) Subject: net/e1000/base: modify flow control setup X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c3c9fe369949a4fd257ee7f298e7260de2bbaf5b;p=dpdk.git net/e1000/base: modify flow control setup Customers had a problem with large pings after connected standby. This is due to the requirement of maintaining link after CS - the driver blocks resets during "AdapterStart" and skips flow control setup. Added condition in e1000_setup_link_ich8lan.c function that always setup flow control, and setup physical interface only when no need to block resets. Signed-off-by: Nir Efrati Signed-off-by: Guinan Sun Reviewed-by: Wei Zhao --- diff --git a/drivers/net/e1000/base/e1000_ich8lan.c b/drivers/net/e1000/base/e1000_ich8lan.c index 9b9cc7d902..85344ebebc 100644 --- a/drivers/net/e1000/base/e1000_ich8lan.c +++ b/drivers/net/e1000/base/e1000_ich8lan.c @@ -5200,9 +5200,6 @@ STATIC s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) DEBUGFUNC("e1000_setup_link_ich8lan"); - if (hw->phy.ops.check_reset_block(hw)) - return E1000_SUCCESS; - /* ICH parts do not have a word in the NVM to determine * the default flow control setting, so we explicitly * set it to full. @@ -5218,10 +5215,12 @@ STATIC s32 e1000_setup_link_ich8lan(struct e1000_hw *hw) DEBUGOUT1("After fix-ups FlowControl is now = %x\n", hw->fc.current_mode); - /* Continue to configure the copper link. */ - ret_val = hw->mac.ops.setup_physical_interface(hw); - if (ret_val) - return ret_val; + if (!hw->phy.ops.check_reset_block(hw)) { + /* Continue to configure the copper link. */ + ret_val = hw->mac.ops.setup_physical_interface(hw); + if (ret_val) + return ret_val; + } E1000_WRITE_REG(hw, E1000_FCTTV, hw->fc.pause_time); if ((hw->phy.type == e1000_phy_82578) ||