From: Slawomir Mrozowicz Date: Wed, 25 Jan 2017 16:27:35 +0000 (+0100) Subject: doc: describe new performance test application X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c6baca7adc94a204e4587761b3891916a4882fed;p=dpdk.git doc: describe new performance test application Add documentation to describe using the new performance test application. Signed-off-by: Slawomir Mrozowicz Signed-off-by: Piotr Azarewicz --- diff --git a/MAINTAINERS b/MAINTAINERS index 7daa94a2fb..27f999b052 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -653,6 +653,7 @@ F: doc/guides/testpmd_app_ug/ Crypto performance test application M: Declan Doherty F: app/test-crypto-perf/ +F: doc/guides/tools/cryptoperf.rst Procinfo tool M: Maryam Tahhan diff --git a/doc/guides/rel_notes/release_17_02.rst b/doc/guides/rel_notes/release_17_02.rst index 9b72d58168..83519dc8c3 100644 --- a/doc/guides/rel_notes/release_17_02.rst +++ b/doc/guides/rel_notes/release_17_02.rst @@ -192,6 +192,11 @@ New Features * Scatter-gatter support for chained mbufs (only out-of place and destination mbuf must be contiguous) +* **Added crypto performance test application.** + + A new performance test application allows measuring performance parameters + of PMDs available in crypto tree. + * **Added Elastic Flow Distributor library (rte_efd).** This new library uses perfect hashing to determine a target/value for a diff --git a/doc/guides/tools/cryptoperf.rst b/doc/guides/tools/cryptoperf.rst new file mode 100644 index 0000000000..6832312d6a --- /dev/null +++ b/doc/guides/tools/cryptoperf.rst @@ -0,0 +1,397 @@ +.. BSD LICENSE + Copyright(c) 2016 Intel Corporation. All rights reserved. + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions + are met: + + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in + the documentation and/or other materials provided with the + distribution. + * Neither the name of Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived + from this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +dpdk-test-crypto-perf Application +================================= + +The ``dpdk-test-crypto-perf`` tool is a Data Plane Development Kit (DPDK) +utility that allows measuring performance parameters of PMDs available in the +crypto tree. There are available two measurement types: throughput and latency. +User can use multiply cores to run tests on but only +one type of crypto PMD can be measured during single application +execution. Cipher parameters, type of device, type of operation and +chain mode have to be specified in the command line as application +parameters. These parameters are checked using device capabilities +structure. + +Compiling the Application +------------------------- + +**Step 1: PMD setting** + +The ``dpdk-test-crypto-perf`` tool depends on crypto device drivers PMD which +are disabled by default in the build configuration file ``common_base``. +The crypto device drivers PMD which should be tested can be enabled by setting:: + + CONFIG_RTE_LIBRTE_PMD_=y + +Setting example for open ssl PMD:: + + CONFIG_RTE_LIBRTE_PMD_OPENSSL=y + +**Step 2: Linearization setting** + +It is possible linearized input segmented packets just before crypto operation +for devices which doesn't support scatter-gather, and allows to measure +performance also for this use case. + +To set on the linearization options add below definition to the +``cperf_ops.h`` file:: + + #define CPERF_LINEARIZATION_ENABLE + +**Step 3: Build the application** + +Execute the ``dpdk-setup.sh`` script to build the DPDK library together with the +``dpdk-test-crypto-perf`` applcation. + +Initially, the user must select a DPDK target to choose the correct target type +and compiler options to use when building the libraries. +The user must have all libraries, modules, updates and compilers installed +in the system prior to this, +as described in the earlier chapters in this Getting Started Guide. + +Running the Application +----------------------- + +The tool application has a number of command line options: + +.. code-block:: console + + dpdk-test-crypto-perf [EAL Options] -- [Application Options] + +EAL Options +~~~~~~~~~~~ + +The following are the EAL command-line options that can be used in conjunction +with the ``dpdk-test-crypto-perf`` applcation. +See the DPDK Getting Started Guides for more information on these options. + +* ``-c `` + + Set the hexadecimal bitmask of the cores to run on. + +* ``-w `` + + Add a PCI device in white list. + +* ``--vdev `` + + Add a virtual device. + +Appication Options +~~~~~~~~~~~~~~~~~~ + +The following are the appication command-line options: + +* ``--ptest type`` + + Set test type, where ``type`` is one of the following:: + + throughput + latency + +* ``--silent`` + + Disable options dump. + +* ``--pool-sz `` + + Set the number of mbufs to be allocated in the mbuf pool. + +* ``--total-ops `` + + Set the number of total operations performed. + +* ``--burst-sz `` + + Set the number of packets per burst. + +* ``--buffer-sz `` + + Set the size of single packet (plaintext or ciphertext in it). + +* ``--segments-nb `` + + Set the number of segments per packet. + +* ``--devtype `` + + Set device type, where ``name`` is one of the following:: + + crypto_null + crypto_aesni_mb + crypto_aesni_gcm + crypto_openssl + crypto_qat + crypto_snow3g + crypto_kasumi + crypto_zuc + +* ``--optype `` + + Set operation type, where ``name`` is one of the following:: + + cipher-only + auth-only + cipher-then-auth + auth-then-cipher + aead + +* ``--sessionless`` + + Enable session-less crypto operations mode. + +* ``--out-of-place`` + + Enable out-of-place crypto operations mode. + +* ``--verify`` + + Enable verify that all crypto operations were successful. + The verification is done after the performance test. + +* ``--test-file `` + + Set test vector file path. See the Test Vector File chapter. + +* ``--test-name `` + + Set specific test name section in the test vector file. + +* ``--cipher-algo `` + + Set cipher algorithm name, where ``name`` is one of the following:: + + 3des-cbc + 3des-ecb + 3des-ctr + aes-cbc + aes-ccm + aes-ctr + aes-ecb + aes-gcm + aes-f8 + aes-xts + arc4 + null + kasumi-f8 + snow3g-uea2 + zuc-eea3 + +* ``--cipher-op `` + + Set cipher operation mode, where ``mode`` is one of the following:: + + encrypt + decrypt + +* ``--cipher-key-sz `` + + Set the size of cipher key. + +* ``--cipher-iv-sz `` + + Set the size of cipher iv. + +* ``--auth-algo `` + + Set authentication algorithm name, where ``name`` is one + of the following:: + + 3des-cbc + aes-cbc-mac + aes-ccm + aes-cmac + aes-gcm + aes-gmac + aes-xcbc-mac + md5 + md5-hmac + sha1 + sha1-hmac + sha2-224 + sha2-224-hmac + sha2-256 + sha2-256-hmac + sha2-384 + sha2-384-hmac + sha2-512 + sha2-512-hmac + kasumi-f9 + snow3g-uia2 + zuc-eia3 + +* ``--auth-op `` + + Set authentication operation mode, where ``mode`` is one of + the following:: + + verify + generate + +* ``--auth-key-sz `` + + Set the size of authentication key. + +* ``--auth-digest-sz `` + + Set the size of authentication digest. + +* ``--auth-aad-sz `` + + Set the size of authentication aad. + +* ``--csv-friendly`` + + Enable test result output CSV friendly rather than human friendly. + +Test Vector File +~~~~~~~~~~~~~~~~ + +The test vector file is a text file contain information about test vectors. +The file is made of the sections. The first section doesn't have header. +It contain global information used in each test variant vectors - +typicaly information about plaintext, ciphertext, cipher key, aut key, +initial vector. All other sections begin header. +The sections contain particular information typicaly digest. + +**Format of the file:** + +Each line beginig with sign '#' contain comment and it is ignored by parser:: + + # + +Header line is just name in square bracket:: + + [
] + +Data line contain information tocken then sign '=' and +a string of bytes in C byte array format:: + + = + +**Tockens list:** + +* ``plaintext`` + + Original plaintext to be crypted. + +* ``ciphertext`` + + Encrypted plaintext string. + +* ``cipher_key`` + + Key used in cipher operation. + +* ``auth_key`` + + Key used in auth operation. + +* ``iv`` + + Initial vector. + +* ``aad`` + + Additional data. + +* ``digest`` + + Digest string. + +Examples +-------- + +Call application for performance throughput test of single Aesni MB PMD +for cipher encryption aes-cbc and auth generation sha1-hmac, +one milion operations, burst size 32, packet size 64:: + + dpdk-test-crypto-perf -c 0xc0 --vdev crypto_aesni_mb_pmd -w 0000:00:00.0 -- + --ptest throughput --devtype crypto_aesni_mb --optype cipher-then-auth + --cipher-algo aes-cbc --cipher-op encrypt --cipher-key-sz 16 --auth-algo + sha1-hmac --auth-op generate --auth-key-sz 64 --auth-digest-sz 12 + --total-ops 10000000 --burst-sz 32 --buffer-sz 64 + +Call application for performance latency test of two Aesni MB PMD executed +on two cores for cipher encryption aes-cbc, ten operations in silent mode:: + + dpdk-test-crypto-perf -c 0xf0 --vdev crypto_aesni_mb_pmd1 + --vdev crypto_aesni_mb_pmd2 -w 0000:00:00.0 -- --devtype crypto_aesni_mb + --cipher-algo aes-cbc --cipher-key-sz 16 --cipher-iv-sz 16 + --cipher-op encrypt --optype cipher-only --silent + --ptest latency --total-ops 10 + +Call application for performance latency test of single open ssl PMD +for cipher encryption aes-gcm and auth generation aes-gcm,ten operations +in silent mode, test vector provide in file "test_aes_gcm.data" +with packet verification:: + + dpdk-test-crypto-perf -c 0xf0 --vdev crypto_openssl -w 0000:00:00.0 -- + --devtype crypto_openssl --cipher-algo aes-gcm --cipher-key-sz 16 + --cipher-iv-sz 16 --cipher-op encrypt --auth-algo aes-gcm --auth-key-sz 16 + --auth-digest-sz 16 --auth-aad-sz 16 --auth-op generate --optype aead + --silent --ptest latency --total-ops 10 + --test-file test_aes_gcm.data --verify + +Test vector file for cipher algorithm aes cbc 256 with authorization sha:: + + # Global Section + plaintext = + 0xff, 0xca, 0xfb, 0xf1, 0x38, 0x20, 0x2f, 0x7b, 0x24, 0x98, 0x26, 0x7d, 0x1d, 0x9f, 0xb3, 0x93, + 0xd9, 0xef, 0xbd, 0xad, 0x4e, 0x40, 0xbd, 0x60, 0xe9, 0x48, 0x59, 0x90, 0x67, 0xd7, 0x2b, 0x7b, + 0x8a, 0xe0, 0x4d, 0xb0, 0x70, 0x38, 0xcc, 0x48, 0x61, 0x7d, 0xee, 0xd6, 0x35, 0x49, 0xae, 0xb4, + 0xaf, 0x6b, 0xdd, 0xe6, 0x21, 0xc0, 0x60, 0xce, 0x0a, 0xf4, 0x1c, 0x2e, 0x1c, 0x8d, 0xe8, 0x7b + ciphertext = + 0x77, 0xF9, 0xF7, 0x7A, 0xA3, 0xCB, 0x68, 0x1A, 0x11, 0x70, 0xD8, 0x7A, 0xB6, 0xE2, 0x37, 0x7E, + 0xD1, 0x57, 0x1C, 0x8E, 0x85, 0xD8, 0x08, 0xBF, 0x57, 0x1F, 0x21, 0x6C, 0xAD, 0xAD, 0x47, 0x1E, + 0x0D, 0x6B, 0x79, 0x39, 0x15, 0x4E, 0x5B, 0x59, 0x2D, 0x76, 0x87, 0xA6, 0xD6, 0x47, 0x8F, 0x82, + 0xB8, 0x51, 0x91, 0x32, 0x60, 0xCB, 0x97, 0xDE, 0xBE, 0xF0, 0xAD, 0xFC, 0x23, 0x2E, 0x22, 0x02 + cipher_key = + 0xE4, 0x23, 0x33, 0x8A, 0x35, 0x64, 0x61, 0xE2, 0x49, 0x03, 0xDD, 0xC6, 0xB8, 0xCA, 0x55, 0x7A, + 0xd0, 0xe7, 0x4b, 0xfb, 0x5d, 0xe5, 0x0c, 0xe7, 0x6f, 0x21, 0xb5, 0x52, 0x2a, 0xbb, 0xc7, 0xf7 + auth_key = + 0xaf, 0x96, 0x42, 0xf1, 0x8c, 0x50, 0xdc, 0x67, 0x1a, 0x43, 0x47, 0x62, 0xc7, 0x04, 0xab, 0x05, + 0xf5, 0x0c, 0xe7, 0xa2, 0xa6, 0x23, 0xd5, 0x3d, 0x95, 0xd8, 0xcd, 0x86, 0x79, 0xf5, 0x01, 0x47, + 0x4f, 0xf9, 0x1d, 0x9d, 0x36, 0xf7, 0x68, 0x1a, 0x64, 0x44, 0x58, 0x5d, 0xe5, 0x81, 0x15, 0x2a, + 0x41, 0xe4, 0x0e, 0xaa, 0x1f, 0x04, 0x21, 0xff, 0x2c, 0xf3, 0x73, 0x2b, 0x48, 0x1e, 0xd2, 0xf7 + iv = + 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B, 0x0C, 0x0D, 0x0E, 0x0F + # Section sha 1 hmac buff 32 + [sha1_hmac_buff_32] + digest = + 0x36, 0xCA, 0x49, 0x6A, 0xE3, 0x54, 0xD8, 0x4F, 0x0B, 0x76, 0xD8, 0xAA, 0x78, 0xEB, 0x9D, 0x65, + 0x2C, 0xCA, 0x1F, 0x97 + # Section sha 256 hmac buff 32 + [sha256_hmac_buff_32] + digest = + 0x1C, 0xB2, 0x3D, 0xD1, 0xF9, 0xC7, 0x6C, 0x49, 0x2E, 0xDA, 0x94, 0x8B, 0xF1, 0xCF, 0x96, 0x43, + 0x67, 0x50, 0x39, 0x76, 0xB5, 0xA1, 0xCE, 0xA1, 0xD7, 0x77, 0x10, 0x07, 0x43, 0x37, 0x05, 0xB4 diff --git a/doc/guides/tools/index.rst b/doc/guides/tools/index.rst index 513221cad4..6dc5d202a5 100644 --- a/doc/guides/tools/index.rst +++ b/doc/guides/tools/index.rst @@ -39,4 +39,5 @@ DPDK Tools User Guides pdump pmdinfo devbind + cryptoperf