From: Zhiyong Yang Date: Fri, 13 Oct 2017 13:17:01 +0000 (+0800) Subject: doc: update port id type X-Git-Tag: spdx-start~1313 X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c6d6982dc9f0245ad9e8ff267c73e48411662308;p=dpdk.git doc: update port id type Since port id has changed from uint8_t to uint16_t in dpdk code, So update the change in related doc. Fixes: f8244c6399d9 ("ethdev: increase port id range") Signed-off-by: Zhiyong Yang Acked-by: John McNamara --- diff --git a/doc/guides/prog_guide/poll_mode_drv.rst b/doc/guides/prog_guide/poll_mode_drv.rst index 4231709976..6a0c9f9923 100644 --- a/doc/guides/prog_guide/poll_mode_drv.rst +++ b/doc/guides/prog_guide/poll_mode_drv.rst @@ -562,7 +562,7 @@ NIC Reset API .. code-block:: c - int rte_eth_dev_reset(uint8_t port_id); + int rte_eth_dev_reset(uint16_t port_id); Sometimes a port has to be reset passively. For example when a PF is reset, all its VFs should also be reset by the application to make them diff --git a/doc/guides/prog_guide/rte_flow.rst b/doc/guides/prog_guide/rte_flow.rst index 31138819b2..13e3dbe0d8 100644 --- a/doc/guides/prog_guide/rte_flow.rst +++ b/doc/guides/prog_guide/rte_flow.rst @@ -1418,7 +1418,7 @@ supported and can be created. .. code-block:: c int - rte_flow_validate(uint8_t port_id, + rte_flow_validate(uint16_t port_id, const struct rte_flow_attr *attr, const struct rte_flow_item pattern[], const struct rte_flow_action actions[], @@ -1473,7 +1473,7 @@ actually created and a handle returned. .. code-block:: c struct rte_flow * - rte_flow_create(uint8_t port_id, + rte_flow_create(uint16_t port_id, const struct rte_flow_attr *attr, const struct rte_flow_item pattern[], const struct rte_flow_action *actions[], @@ -1505,7 +1505,7 @@ performing this step before releasing resources. .. code-block:: c int - rte_flow_destroy(uint8_t port_id, + rte_flow_destroy(uint16_t port_id, struct rte_flow *flow, struct rte_flow_error *error); @@ -1536,7 +1536,7 @@ port. They are released as with successive calls to ``rte_flow_destroy()``. .. code-block:: c int - rte_flow_flush(uint8_t port_id, + rte_flow_flush(uint16_t port_id, struct rte_flow_error *error); In the unlikely event of failure, handles are still considered destroyed and @@ -1564,7 +1564,7 @@ definition. .. code-block:: c int - rte_flow_query(uint8_t port_id, + rte_flow_query(uint16_t port_id, struct rte_flow *flow, enum rte_flow_action_type action, void *data, @@ -1637,7 +1637,7 @@ port and may return errors such as ``ENOTSUP`` ("not supported"): .. code-block:: c int - rte_flow_isolate(uint8_t port_id, int set, struct rte_flow_error *error); + rte_flow_isolate(uint16_t port_id, int set, struct rte_flow_error *error); Arguments: diff --git a/doc/guides/sample_app_ug/ipv4_multicast.rst b/doc/guides/sample_app_ug/ipv4_multicast.rst index 49712a0fe3..60bca859ee 100644 --- a/doc/guides/sample_app_ug/ipv4_multicast.rst +++ b/doc/guides/sample_app_ug/ipv4_multicast.rst @@ -268,7 +268,7 @@ The actual packet transmission is done in the mcast_send_pkt() function: .. code-block:: c - static inline void mcast_send_pkt(struct rte_mbuf *pkt, struct ether_addr *dest_addr, struct lcore_queue_conf *qconf, uint8_t port) + static inline void mcast_send_pkt(struct rte_mbuf *pkt, struct ether_addr *dest_addr, struct lcore_queue_conf *qconf, uint16_t port) { struct ether_hdr *ethdr; uint16_t len; diff --git a/doc/guides/sample_app_ug/kernel_nic_interface.rst b/doc/guides/sample_app_ug/kernel_nic_interface.rst index 619a7b5276..e050e8bf77 100644 --- a/doc/guides/sample_app_ug/kernel_nic_interface.rst +++ b/doc/guides/sample_app_ug/kernel_nic_interface.rst @@ -246,7 +246,7 @@ The code for allocating the kernel NIC interfaces for a specific port is as foll .. code-block:: c static int - kni_alloc(uint8_t port_id) + kni_alloc(uint16_t port_id) { uint8_t i; struct rte_kni *kni; @@ -335,7 +335,7 @@ The code is as follows: int i, j, nb_token; char *str_fld[_NUM_FLD]; unsigned long int_fld[_NUM_FLD]; - uint8_t port_id, nb_kni_port_params = 0; + uint16_t port_id, nb_kni_port_params = 0; memset(&kni_port_params_array, 0, sizeof(kni_port_params_array)); @@ -532,7 +532,7 @@ Currently, setting a new MTU and configuring the network interface (up/ down) ar /* Callback for request of changing MTU */ static int - kni_change_mtu(uint8_t port_id, unsigned new_mtu) + kni_change_mtu(uint16_t port_id, unsigned new_mtu) { int ret; struct rte_eth_conf conf; @@ -581,7 +581,7 @@ Currently, setting a new MTU and configuring the network interface (up/ down) ar /* Callback for request of configuring network interface up/down */ static int - kni_config_network_interface(uint8_t port_id, uint8_t if_up) + kni_config_network_interface(uint16_t port_id, uint8_t if_up) { int ret = 0; diff --git a/doc/guides/sample_app_ug/l2_forward_job_stats.rst b/doc/guides/sample_app_ug/l2_forward_job_stats.rst index 1029cc8ff5..1d45896f5e 100644 --- a/doc/guides/sample_app_ug/l2_forward_job_stats.rst +++ b/doc/guides/sample_app_ug/l2_forward_job_stats.rst @@ -558,7 +558,7 @@ If the table is full, the whole packets table is transmitted using the l2fwd_sen /* Send the packet on an output interface */ static int - l2fwd_send_packet(struct rte_mbuf *m, uint8_t port) + l2fwd_send_packet(struct rte_mbuf *m, uint16_t port) { unsigned lcore_id, len; struct lcore_queue_conf *qconf; @@ -593,7 +593,7 @@ however it improves performance: unsigned lcore_id; struct lcore_queue_conf *qconf; struct mbuf_table *m_table; - uint8_t portid; + uint16_t portid; lcore_id = rte_lcore_id(); qconf = &lcore_queue_conf[lcore_id]; diff --git a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst index f579c8fe9c..6f496f730d 100644 --- a/doc/guides/sample_app_ug/l2_forward_real_virtual.rst +++ b/doc/guides/sample_app_ug/l2_forward_real_virtual.rst @@ -474,7 +474,7 @@ If the table is full, the whole packets table is transmitted using the l2fwd_sen /* Send the packet on an output interface */ static int - l2fwd_send_packet(struct rte_mbuf *m, uint8_t port) + l2fwd_send_packet(struct rte_mbuf *m, uint16_t port) { unsigned lcore_id, len; struct lcore_queue_conf *qconf; diff --git a/doc/guides/sample_app_ug/l3_forward.rst b/doc/guides/sample_app_ug/l3_forward.rst index 6a6b8fbe8d..2635f403b8 100644 --- a/doc/guides/sample_app_ug/l3_forward.rst +++ b/doc/guides/sample_app_ug/l3_forward.rst @@ -283,7 +283,7 @@ The get_ipv4_dst_port() function is shown below: .. code-block:: c static inline uint8_t - get_ipv4_dst_port(void *ipv4_hdr, uint8_t portid, lookup_struct_t *ipv4_l3fwd_lookup_struct) + get_ipv4_dst_port(void *ipv4_hdr, uint16_t portid, lookup_struct_t *ipv4_l3fwd_lookup_struct) { int ret = 0; union ipv4_5tuple_host key; @@ -312,7 +312,7 @@ The key code snippet of simple_ipv4_fwd_4pkts() is shown below: .. code-block:: c static inline void - simple_ipv4_fwd_4pkts(struct rte_mbuf* m[4], uint8_t portid, struct lcore_conf *qconf) + simple_ipv4_fwd_4pkts(struct rte_mbuf* m[4], uint16_t portid, struct lcore_conf *qconf) { // ... @@ -351,10 +351,10 @@ for LPM-based lookups is done by the get_ipv4_dst_port() function below: .. code-block:: c - static inline uint8_t - get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint8_t portid, lookup_struct_t *ipv4_l3fwd_lookup_struct) + static inline uint16_t + get_ipv4_dst_port(struct ipv4_hdr *ipv4_hdr, uint16_t portid, lookup_struct_t *ipv4_l3fwd_lookup_struct) { uint8_t next_hop; - return (uint8_t) ((rte_lpm_lookup(ipv4_l3fwd_lookup_struct, rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)? next_hop : portid); + return ((rte_lpm_lookup(ipv4_l3fwd_lookup_struct, rte_be_to_cpu_32(ipv4_hdr->dst_addr), &next_hop) == 0)? next_hop : portid); } diff --git a/doc/guides/sample_app_ug/l3_forward_power_man.rst b/doc/guides/sample_app_ug/l3_forward_power_man.rst index ea9c404d80..18fe63b5af 100644 --- a/doc/guides/sample_app_ug/l3_forward_power_man.rst +++ b/doc/guides/sample_app_ug/l3_forward_power_man.rst @@ -181,11 +181,11 @@ responsible for checking if it needs to scale down frequency at run time by chec struct lcore_conf *qconf; int ret; unsigned nb_ports; - uint16_t queueid; + uint16_t queueid, portid; unsigned lcore_id; uint64_t hz; uint32_t n_tx_queue, nb_lcores; - uint8_t portid, nb_rx_queue, queue, socketid; + uint8_t nb_rx_queue, queue, socketid; // ... diff --git a/doc/guides/sample_app_ug/link_status_intr.rst b/doc/guides/sample_app_ug/link_status_intr.rst index f9af474926..abc1d8f0db 100644 --- a/doc/guides/sample_app_ug/link_status_intr.rst +++ b/doc/guides/sample_app_ug/link_status_intr.rst @@ -219,7 +219,7 @@ An example callback function that has been written as indicated below. .. code-block:: c static void - lsi_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param) + lsi_event_callback(uint16_t port_id, enum rte_eth_event_type type, void *param) { struct rte_eth_link link; @@ -405,7 +405,7 @@ If the table is full, the whole packets table is transmitted using the lsi_send_ /* Send the packet on an output interface */ static int - lsi_send_packet(struct rte_mbuf *m, uint8_t port) + lsi_send_packet(struct rte_mbuf *m, uint16_t port) { unsigned lcore_id, len; struct lcore_queue_conf *qconf; diff --git a/doc/guides/sample_app_ug/ptpclient.rst b/doc/guides/sample_app_ug/ptpclient.rst index d3ef1d1193..d643cf1eae 100644 --- a/doc/guides/sample_app_ug/ptpclient.rst +++ b/doc/guides/sample_app_ug/ptpclient.rst @@ -257,7 +257,7 @@ PTP IEEE1588 L2 functionality. .. code-block:: c void - parse_ptp_frames(uint8_t portid, struct rte_mbuf *m) { + parse_ptp_frames(uint16_t portid, struct rte_mbuf *m) { struct ptp_header *ptp_hdr; struct ether_hdr *eth_hdr; uint16_t eth_type; diff --git a/doc/guides/sample_app_ug/rxtx_callbacks.rst b/doc/guides/sample_app_ug/rxtx_callbacks.rst index 8d1bb86f77..32619e0c17 100644 --- a/doc/guides/sample_app_ug/rxtx_callbacks.rst +++ b/doc/guides/sample_app_ug/rxtx_callbacks.rst @@ -124,7 +124,7 @@ comments: .. code-block:: c static inline int - port_init(uint8_t port, struct rte_mempool *mbuf_pool) + port_init(uint16_t port, struct rte_mempool *mbuf_pool) { struct rte_eth_conf port_conf = port_conf_default; const uint16_t rx_rings = 1, tx_rings = 1; @@ -196,7 +196,7 @@ all packets received: .. code-block:: c static uint16_t - add_timestamps(uint8_t port __rte_unused, uint16_t qidx __rte_unused, + add_timestamps(uint16_t port __rte_unused, uint16_t qidx __rte_unused, struct rte_mbuf **pkts, uint16_t nb_pkts, void *_ __rte_unused) { unsigned i; @@ -222,7 +222,7 @@ packets prior to transmission: .. code-block:: c static uint16_t - calc_latency(uint8_t port __rte_unused, uint16_t qidx __rte_unused, + calc_latency(uint16_t port __rte_unused, uint16_t qidx __rte_unused, struct rte_mbuf **pkts, uint16_t nb_pkts, void *_ __rte_unused) { uint64_t cycles = 0; diff --git a/doc/guides/sample_app_ug/skeleton.rst b/doc/guides/sample_app_ug/skeleton.rst index c39b03322b..17714455cd 100644 --- a/doc/guides/sample_app_ug/skeleton.rst +++ b/doc/guides/sample_app_ug/skeleton.rst @@ -160,7 +160,7 @@ Forwarding application is shown below: .. code-block:: c static inline int - port_init(uint8_t port, struct rte_mempool *mbuf_pool) + port_init(uint16_t port, struct rte_mempool *mbuf_pool) { struct rte_eth_conf port_conf = port_conf_default; const uint16_t rx_rings = 1, tx_rings = 1; @@ -241,8 +241,8 @@ looks like the following: static __attribute__((noreturn)) void lcore_main(void) { - const uint8_t nb_ports = rte_eth_dev_count(); - uint8_t port; + const uint16_t nb_ports = rte_eth_dev_count(); + uint16_t port; /* * Check that the port is on the same NUMA node as the polling thread