From: Raslan Darawsheh <rasland@mellanox.com>
Date: Mon, 23 Mar 2020 14:21:33 +0000 (+0200)
Subject: net/mlx5: fix validation of VXLAN/VXLAN-GPE specs
X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c79ab350a8976718d477d616f06678872a29b1b2;p=dpdk.git

net/mlx5: fix validation of VXLAN/VXLAN-GPE specs

Trying to create zero spec for vni wasn't allowed, to
avoid matching all packets from previous layer (udp).
This behavior is incorrect, since VXLAN is being identified
through the outer UDP destination port.

Currently, if the user didn't specify outer UDP destination
port the PMD will automatically match only on  outer
UDP port of 4798, and if the user want to match on some none
standard port he need to specify it explicitly in the rule.

This removes the limitation of vni spec to be able to match any
vni.

Fixes: 23c1d42c7138 ("net/mlx5: split flow validation to dedicated function")
Cc: stable@dpdk.org

Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
Acked-by: Matan Azrad <matan@mellanox.com>
---

diff --git a/drivers/net/mlx5/mlx5_flow.c b/drivers/net/mlx5/mlx5_flow.c
index 41072da6df..2ef6558495 100644
--- a/drivers/net/mlx5/mlx5_flow.c
+++ b/drivers/net/mlx5/mlx5_flow.c
@@ -1836,7 +1836,6 @@ mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
 		uint32_t vlan_id;
 		uint8_t vni[4];
 	} id = { .vlan_id = 0, };
-	uint32_t vlan_id = 0;
 
 
 	if (item_flags & MLX5_FLOW_LAYER_TUNNEL)
@@ -1863,23 +1862,8 @@ mlx5_flow_validate_item_vxlan(const struct rte_flow_item *item,
 		return ret;
 	if (spec) {
 		memcpy(&id.vni[1], spec->vni, 3);
-		vlan_id = id.vlan_id;
 		memcpy(&id.vni[1], mask->vni, 3);
-		vlan_id &= id.vlan_id;
 	}
-	/*
-	 * Tunnel id 0 is equivalent as not adding a VXLAN layer, if
-	 * only this layer is defined in the Verbs specification it is
-	 * interpreted as wildcard and all packets will match this
-	 * rule, if it follows a full stack layer (ex: eth / ipv4 /
-	 * udp), all packets matching the layers before will also
-	 * match this rule.  To avoid such situation, VNI 0 is
-	 * currently refused.
-	 */
-	if (!vlan_id)
-		return rte_flow_error_set(error, ENOTSUP,
-					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "VXLAN vni cannot be 0");
 	if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,
@@ -1918,7 +1902,6 @@ mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
 		uint32_t vlan_id;
 		uint8_t vni[4];
 	} id = { .vlan_id = 0, };
-	uint32_t vlan_id = 0;
 
 	if (!priv->config.l3_vxlan_en)
 		return rte_flow_error_set(error, ENOTSUP,
@@ -1956,22 +1939,8 @@ mlx5_flow_validate_item_vxlan_gpe(const struct rte_flow_item *item,
 						  "VxLAN-GPE protocol"
 						  " not supported");
 		memcpy(&id.vni[1], spec->vni, 3);
-		vlan_id = id.vlan_id;
 		memcpy(&id.vni[1], mask->vni, 3);
-		vlan_id &= id.vlan_id;
 	}
-	/*
-	 * Tunnel id 0 is equivalent as not adding a VXLAN layer, if only this
-	 * layer is defined in the Verbs specification it is interpreted as
-	 * wildcard and all packets will match this rule, if it follows a full
-	 * stack layer (ex: eth / ipv4 / udp), all packets matching the layers
-	 * before will also match this rule.  To avoid such situation, VNI 0
-	 * is currently refused.
-	 */
-	if (!vlan_id)
-		return rte_flow_error_set(error, ENOTSUP,
-					  RTE_FLOW_ERROR_TYPE_ITEM, item,
-					  "VXLAN-GPE vni cannot be 0");
 	if (!(item_flags & MLX5_FLOW_LAYER_OUTER))
 		return rte_flow_error_set(error, ENOTSUP,
 					  RTE_FLOW_ERROR_TYPE_ITEM, item,