From: Shreyansh Jain Date: Wed, 31 Jan 2018 09:13:09 +0000 (+0530) Subject: rawdev: introduce raw device library X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=c88b3f2558ed09738d29913169bb865531dcb067;p=dpdk.git rawdev: introduce raw device library Each device in DPDK has a type associated with it - ethernet, crypto, event etc. This patch introduces 'rawdevice' which is a generic type of device, not currently handled out-of-the-box by DPDK. A device which can be scanned on an installed bus (pci, fslmc, ...) or instantiated through devargs, can be interfaced using standardized APIs just like other standardized devices. This library introduces an API set which can be plugged on the northbound side to the application layer, and on the southbound side to the driver layer. The APIs of rawdev library exposes some generic operations which can enable configuration and I/O with the raw devices. Using opaque data (pointer) as API arguments, library allows a high flexibility for application and driver implementation. This patch introduces basic device operations like start, stop, reset, queue and info support. Subsequent patches would introduce other operations like buffer enqueue/dequeue and firmware support. Signed-off-by: Shreyansh Jain --- diff --git a/MAINTAINERS b/MAINTAINERS index acd056134f..1c3376a35c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -315,6 +315,11 @@ F: lib/librte_eventdev/*eth_rx_adapter* F: test/test/test_event_eth_rx_adapter.c F: doc/guides/prog_guide/event_ethernet_rx_adapter.rst +Raw device API - EXPERIMENTAL +M: Shreyansh Jain +M: Hemant Agrawal +F: lib/librte_rawdev/ + Bus Drivers ----------- diff --git a/config/common_base b/config/common_base index 751ba43deb..fb48dd68dc 100644 --- a/config/common_base +++ b/config/common_base @@ -605,6 +605,13 @@ CONFIG_RTE_LIBRTE_PMD_DPAA_EVENTDEV=n # CONFIG_RTE_LIBRTE_PMD_DPAA2_EVENTDEV=n +# +# Compile raw device support +# EXPERIMENTAL: API may change without prior notice +# +CONFIG_RTE_LIBRTE_RAWDEV=y +CONFIG_RTE_RAWDEV_MAX_DEVS=10 + # # Compile librte_ring # diff --git a/lib/Makefile b/lib/Makefile index 427f34b00c..ec965a606a 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -32,6 +32,8 @@ DEPDIRS-librte_security += librte_ether DEPDIRS-librte_security += librte_cryptodev DIRS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += librte_eventdev DEPDIRS-librte_eventdev := librte_eal librte_ring librte_ether librte_hash +DIRS-$(CONFIG_RTE_LIBRTE_RAWDEV) += librte_rawdev +DEPDIRS-librte_rawdev := librte_eal librte_ether DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost DEPDIRS-librte_vhost := librte_eal librte_mempool librte_mbuf librte_ether \ librte_net diff --git a/lib/librte_rawdev/Makefile b/lib/librte_rawdev/Makefile new file mode 100644 index 0000000000..b9105b0606 --- /dev/null +++ b/lib/librte_rawdev/Makefile @@ -0,0 +1,28 @@ +# SPDX-License-Identifier: BSD-3-Clause +# Copyright 2017 NXP + +include $(RTE_SDK)/mk/rte.vars.mk + +# library name +LIB = librte_rawdev.a + +# library version +LIBABIVER := 1 + +# build flags +CFLAGS += -DALLOW_EXPERIMENTAL_API +CFLAGS += -O3 +CFLAGS += $(WERROR_FLAGS) +LDLIBS += -lrte_eal + +# library source files +SRCS-y += rte_rawdev.c + +# export include files +SYMLINK-y-include += rte_rawdev.h +SYMLINK-y-include += rte_rawdev_pmd.h + +# versioning export map +EXPORT_MAP := rte_rawdev_version.map + +include $(RTE_SDK)/mk/rte.lib.mk diff --git a/lib/librte_rawdev/rte_rawdev.c b/lib/librte_rawdev/rte_rawdev.c new file mode 100644 index 0000000000..46353a4eb4 --- /dev/null +++ b/lib/librte_rawdev/rte_rawdev.c @@ -0,0 +1,360 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2017 NXP + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "rte_rawdev.h" +#include "rte_rawdev_pmd.h" + +/* dynamic log identifier */ +int librawdev_logtype; + +struct rte_rawdev rte_rawdevices[RTE_RAWDEV_MAX_DEVS]; + +struct rte_rawdev *rte_rawdevs = &rte_rawdevices[0]; + +static struct rte_rawdev_global rawdev_globals = { + .nb_devs = 0 +}; + +struct rte_rawdev_global *rte_rawdev_globals = &rawdev_globals; + +/* Raw device, northbound API implementation */ +uint8_t __rte_experimental +rte_rawdev_count(void) +{ + return rte_rawdev_globals->nb_devs; +} + +uint16_t __rte_experimental +rte_rawdev_get_dev_id(const char *name) +{ + uint16_t i; + + if (!name) + return -EINVAL; + + for (i = 0; i < rte_rawdev_globals->nb_devs; i++) + if ((strcmp(rte_rawdevices[i].name, name) + == 0) && + (rte_rawdevices[i].attached == + RTE_RAWDEV_ATTACHED)) + return i; + return -ENODEV; +} + +int __rte_experimental +rte_rawdev_socket_id(uint16_t dev_id) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + return dev->socket_id; +} + +int __rte_experimental +rte_rawdev_info_get(uint16_t dev_id, struct rte_rawdev_info *dev_info) +{ + struct rte_rawdev *rawdev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + RTE_FUNC_PTR_OR_ERR_RET(dev_info, -EINVAL); + + if (dev_info == NULL) + return -EINVAL; + + rawdev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*rawdev->dev_ops->dev_info_get, -ENOTSUP); + (*rawdev->dev_ops->dev_info_get)(rawdev, dev_info->dev_private); + + if (dev_info) { + + dev_info->driver_name = rawdev->driver_name; + dev_info->device = rawdev->device; + } + + return 0; +} + +int __rte_experimental +rte_rawdev_configure(uint16_t dev_id, struct rte_rawdev_info *dev_conf) +{ + struct rte_rawdev *dev; + int diag; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + RTE_FUNC_PTR_OR_ERR_RET(dev_conf, -EINVAL); + + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_configure, -ENOTSUP); + + if (dev->started) { + RTE_RDEV_ERR( + "device %d must be stopped to allow configuration", dev_id); + return -EBUSY; + } + + /* Configure the device */ + diag = (*dev->dev_ops->dev_configure)(dev, dev_conf->dev_private); + if (diag != 0) + RTE_RDEV_ERR("dev%d dev_configure = %d", dev_id, diag); + else + dev->attached = 1; + + return diag; +} + +int __rte_experimental +rte_rawdev_queue_conf_get(uint16_t dev_id, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_def_conf, -ENOTSUP); + (*dev->dev_ops->queue_def_conf)(dev, queue_id, queue_conf); + return 0; +} + +int __rte_experimental +rte_rawdev_queue_setup(uint16_t dev_id, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_setup, -ENOTSUP); + return (*dev->dev_ops->queue_setup)(dev, queue_id, queue_conf); +} + +int __rte_experimental +rte_rawdev_queue_release(uint16_t dev_id, uint16_t queue_id) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->queue_release, -ENOTSUP); + return (*dev->dev_ops->queue_release)(dev, queue_id); +} + +int __rte_experimental +rte_rawdev_dump(uint16_t dev_id, FILE *f) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dump, -ENOTSUP); + return (*dev->dev_ops->dump)(dev, f); +} + +int __rte_experimental +rte_rawdev_start(uint16_t dev_id) +{ + struct rte_rawdev *dev; + int diag; + + RTE_RDEV_DEBUG("Start dev_id=%" PRIu8, dev_id); + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_start, -ENOTSUP); + + if (dev->started != 0) { + RTE_RDEV_ERR("Device with dev_id=%" PRIu8 "already started", + dev_id); + return 0; + } + + diag = (*dev->dev_ops->dev_start)(dev); + if (diag == 0) + dev->started = 1; + else + return diag; + + return 0; +} + +void __rte_experimental +rte_rawdev_stop(uint16_t dev_id) +{ + struct rte_rawdev *dev; + + RTE_RDEV_DEBUG("Stop dev_id=%" PRIu8, dev_id); + + RTE_RAWDEV_VALID_DEVID_OR_RET(dev_id); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_RET(*dev->dev_ops->dev_stop); + + if (dev->started == 0) { + RTE_RDEV_ERR("Device with dev_id=%" PRIu8 "already stopped", + dev_id); + return; + } + + (*dev->dev_ops->dev_stop)(dev); + dev->started = 0; +} + +int __rte_experimental +rte_rawdev_close(uint16_t dev_id) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_close, -ENOTSUP); + /* Device must be stopped before it can be closed */ + if (dev->started == 1) { + RTE_RDEV_ERR("Device %u must be stopped before closing", + dev_id); + return -EBUSY; + } + + return (*dev->dev_ops->dev_close)(dev); +} + +int __rte_experimental +rte_rawdev_reset(uint16_t dev_id) +{ + struct rte_rawdev *dev; + + RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, -EINVAL); + dev = &rte_rawdevs[dev_id]; + + RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_reset, -ENOTSUP); + /* Reset is not dependent on state of the device */ + return (*dev->dev_ops->dev_reset)(dev); +} + +static inline uint8_t +rte_rawdev_find_free_device_index(void) +{ + uint16_t dev_id; + + for (dev_id = 0; dev_id < RTE_RAWDEV_MAX_DEVS; dev_id++) { + if (rte_rawdevs[dev_id].attached == + RTE_RAWDEV_DETACHED) + return dev_id; + } + + return RTE_RAWDEV_MAX_DEVS; +} + +struct rte_rawdev * __rte_experimental +rte_rawdev_pmd_allocate(const char *name, size_t dev_priv_size, int socket_id) +{ + struct rte_rawdev *rawdev; + uint16_t dev_id; + + if (rte_rawdev_pmd_get_named_dev(name) != NULL) { + RTE_RDEV_ERR("Event device with name %s already allocated!", + name); + return NULL; + } + + dev_id = rte_rawdev_find_free_device_index(); + if (dev_id == RTE_RAWDEV_MAX_DEVS) { + RTE_RDEV_ERR("Reached maximum number of raw devices"); + return NULL; + } + + rawdev = &rte_rawdevs[dev_id]; + + rawdev->dev_private = rte_zmalloc_socket("rawdev private", + dev_priv_size, + RTE_CACHE_LINE_SIZE, + socket_id); + if (!rawdev->dev_private) { + RTE_RDEV_ERR("Unable to allocate memory to Skeleton dev"); + return NULL; + } + + + rawdev->dev_id = dev_id; + rawdev->socket_id = socket_id; + rawdev->started = 0; + snprintf(rawdev->name, RTE_RAWDEV_NAME_MAX_LEN, "%s", name); + + rawdev->attached = RTE_RAWDEV_ATTACHED; + rawdev_globals.nb_devs++; + + return rawdev; +} + +int __rte_experimental +rte_rawdev_pmd_release(struct rte_rawdev *rawdev) +{ + int ret; + + if (rawdev == NULL) + return -EINVAL; + + ret = rte_rawdev_close(rawdev->dev_id); + if (ret < 0) + return ret; + + rawdev->attached = RTE_RAWDEV_DETACHED; + rawdev_globals.nb_devs--; + + rawdev->dev_id = 0; + rawdev->socket_id = 0; + rawdev->dev_ops = NULL; + if (rawdev->dev_private) { + rte_free(rawdev->dev_private); + rawdev->dev_private = NULL; + } + + return 0; +} + +RTE_INIT(librawdev_init_log); + +static void +librawdev_init_log(void) +{ + librawdev_logtype = rte_log_register("lib.rawdev"); + if (librawdev_logtype >= 0) + rte_log_set_level(librawdev_logtype, RTE_LOG_INFO); +} diff --git a/lib/librte_rawdev/rte_rawdev.h b/lib/librte_rawdev/rte_rawdev.h new file mode 100644 index 0000000000..76a533e067 --- /dev/null +++ b/lib/librte_rawdev/rte_rawdev.h @@ -0,0 +1,326 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2017 NXP + */ + +#ifndef _RTE_RAWDEV_H_ +#define _RTE_RAWDEV_H_ + +/** + * @file rte_rawdev.h + * + * Generic device abstraction APIs. + * + * This API allow applications to configure and use generic devices having + * no specific type already available in DPDK. + * + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include +#include +#include + +/* Rawdevice object - essentially a void to be typecasted by implementation */ +typedef void *rte_rawdev_obj_t; + +/** + * Get the total number of raw devices that have been successfully + * initialised. + * + * @return + * The total number of usable raw devices. + */ +uint8_t __rte_experimental +rte_rawdev_count(void); + +/** + * Get the device identifier for the named raw device. + * + * @param name + * Raw device name to select the raw device identifier. + * + * @return + * Returns raw device identifier on success. + * - <0: Failure to find named raw device. + */ +uint16_t __rte_experimental +rte_rawdev_get_dev_id(const char *name); + +/** + * Return the NUMA socket to which a device is connected. + * + * @param dev_id + * The identifier of the device. + * @return + * The NUMA socket id to which the device is connected or + * a default of zero if the socket could not be determined. + * -(-EINVAL) dev_id value is out of range. + */ +int __rte_experimental +rte_rawdev_socket_id(uint16_t dev_id); + +/** + * Raw device information forward declaration + */ +struct rte_rawdev_info; + +/** + * Retrieve the contextual information of a raw device. + * + * @param dev_id + * The identifier of the device. + * + * @param[out] dev_info + * A pointer to a structure of type *rte_rawdev_info* to be filled with the + * contextual information of the device. + * + * @return + * - 0: Success, driver updates the contextual information of the raw device + * - <0: Error code returned by the driver info get function. + * + */ +int __rte_experimental +rte_rawdev_info_get(uint16_t dev_id, struct rte_rawdev_info *dev_info); + +/** + * Configure a raw device. + * + * This function must be invoked first before any other function in the + * API. This function can also be re-invoked when a device is in the + * stopped state. + * + * The caller may use rte_rawdev_info_get() to get the capability of each + * resources available for this raw device. + * + * @param dev_id + * The identifier of the device to configure. + * @param dev_conf + * The raw device configuration structure encapsulated into rte_rawdev_info + * object. + * It is assumed that the opaque object has enough information which the + * driver/implementation can use to configure the device. It is also assumed + * that once the configuration is done, a `queue_id` type field can be used + * to refer to some arbitrary internal representation of a queue. + * + * @return + * - 0: Success, device configured. + * - <0: Error code returned by the driver configuration function. + */ +int __rte_experimental +rte_rawdev_configure(uint16_t dev_id, struct rte_rawdev_info *dev_conf); + + +/** + * Retrieve the current configuration information of a raw queue designated + * by its *queue_id* from the raw driver for a raw device. + * + * This function intended to be used in conjunction with rte_raw_queue_setup() + * where caller needs to set up the queue by overriding few default values. + * + * @param dev_id + * The identifier of the device. + * @param queue_id + * The index of the raw queue to get the configuration information. + * The value must be in the range [0, nb_raw_queues - 1] + * previously supplied to rte_rawdev_configure(). + * @param[out] queue_conf + * The pointer to the default raw queue configuration data. + * @return + * - 0: Success, driver updates the default raw queue configuration data. + * - <0: Error code returned by the driver info get function. + * + * @see rte_raw_queue_setup() + * + */ +int __rte_experimental +rte_rawdev_queue_conf_get(uint16_t dev_id, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf); + +/** + * Allocate and set up a raw queue for a raw device. + * + * @param dev_id + * The identifier of the device. + * @param queue_id + * The index of the raw queue to setup. The value must be in the range + * [0, nb_raw_queues - 1] previously supplied to rte_rawdev_configure(). + * @param queue_conf + * The pointer to the configuration data to be used for the raw queue. + * NULL value is allowed, in which case default configuration used. + * + * @see rte_rawdev_queue_conf_get() + * + * @return + * - 0: Success, raw queue correctly set up. + * - <0: raw queue configuration failed + */ +int __rte_experimental +rte_rawdev_queue_setup(uint16_t dev_id, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf); + +/** + * Release and deallocate a raw queue from a raw device. + * + * @param dev_id + * The identifier of the device. + * @param queue_id + * The index of the raw queue to release. The value must be in the range + * [0, nb_raw_queues - 1] previously supplied to rte_rawdev_configure(). + * + * @see rte_rawdev_queue_conf_get() + * + * @return + * - 0: Success, raw queue released. + * - <0: raw queue configuration failed + */ +int __rte_experimental +rte_rawdev_queue_release(uint16_t dev_id, uint16_t queue_id); +/** + * Get the number of raw queues on a specific raw device + * + * @param dev_id + * Raw device identifier. + * @return + * - The number of configured raw queues + */ +uint16_t __rte_experimental +rte_rawdev_queue_count(uint16_t dev_id); + +/** + * Start a raw device. + * + * The device start step is the last one and consists of setting the raw + * queues to start accepting the raws and schedules to raw ports. + * + * On success, all basic functions exported by the API (raw enqueue, + * raw dequeue and so on) can be invoked. + * + * @param dev_id + * Raw device identifier + * @return + * - 0: Success, device started. + * < 0: Failure + */ +int __rte_experimental +rte_rawdev_start(uint16_t dev_id); + +/** + * Stop a raw device. The device can be restarted with a call to + * rte_rawdev_start() + * + * @param dev_id + * Raw device identifier. + */ +void __rte_experimental +rte_rawdev_stop(uint16_t dev_id); + +/** + * Close a raw device. The device cannot be restarted after this call. + * + * @param dev_id + * Raw device identifier + * + * @return + * - 0 on successfully closing device + * - <0 on failure to close device + * - (-EAGAIN) if device is busy + */ +int __rte_experimental +rte_rawdev_close(uint16_t dev_id); + +/** + * Reset a raw device. + * This is different from cycle of rte_rawdev_start->rte_rawdev_stop in the + * sense similar to hard or soft reset. + * + * @param dev_id + * Raw device identifiers + * @return + * 0 for sucessful reset, + * !0 for failure in resetting + */ +int __rte_experimental +rte_rawdev_reset(uint16_t dev_id); + +#define RTE_RAWDEV_NAME_MAX_LEN (64) +/**< @internal Max length of name of raw PMD */ + + + +/** @internal + * The data structure associated with each raw device. + * It is a placeholder for PMD specific data, encapsulating only information + * related to framework. + */ +struct rte_rawdev { + /**< Socket ID where memory is allocated */ + int socket_id; + /**< Device ID for this instance */ + uint16_t dev_id; + /**< Functions exported by PMD */ + const struct rte_rawdev_ops *dev_ops; + /**< Device info. supplied during device initialization */ + struct rte_device *device; + /**< Driver info. supplied by probing */ + const char *driver_name; + + RTE_STD_C11 + /**< Flag indicating the device is attached */ + uint8_t attached : 1; + /**< Device state: STARTED(1)/STOPPED(0) */ + uint8_t started : 1; + + /**< PMD-specific private data */ + rte_rawdev_obj_t dev_private; + /**< Device name */ + char name[RTE_RAWDEV_NAME_MAX_LEN]; +} __rte_cache_aligned; + +/** @internal The pool of rte_rawdev structures. */ +extern struct rte_rawdev *rte_rawdevs; + + +struct rte_rawdev_info { + /**< Name of driver handling this device */ + const char *driver_name; + /**< Device encapsulation */ + struct rte_device *device; + /**< Socket ID where memory is allocated */ + int socket_id; + /**< PMD-specific private data */ + rte_rawdev_obj_t dev_private; +}; + +struct rte_rawdev_buf { + /**< Opaque buffer reference */ + void *buf_addr; +}; + +/** + * Dump internal information about *dev_id* to the FILE* provided in *f*. + * + * @param dev_id + * The identifier of the device. + * + * @param f + * A pointer to a file for output + * + * @return + * - 0: on success + * - <0: on failure. + */ +int __rte_experimental +rte_rawdev_dump(uint16_t dev_id, FILE *f); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_RAWDEV_H_ */ diff --git a/lib/librte_rawdev/rte_rawdev_pmd.h b/lib/librte_rawdev/rte_rawdev_pmd.h new file mode 100644 index 0000000000..aeb371152d --- /dev/null +++ b/lib/librte_rawdev/rte_rawdev_pmd.h @@ -0,0 +1,354 @@ +/* SPDX-License-Identifier: BSD-3-Clause + * Copyright 2017 NXP + */ + +#ifndef _RTE_RAWDEV_PMD_H_ +#define _RTE_RAWDEV_PMD_H_ + +/** @file + * RTE RAW PMD APIs + * + * @note + * Driver facing APIs for a raw device. These are not to be called directly by + * any application. + * + * @warning + * @b EXPERIMENTAL: this API may change without prior notice + */ + +#ifdef __cplusplus +extern "C" { +#endif + +#include + +#include +#include +#include +#include + +#include "rte_rawdev.h" + +extern int librawdev_logtype; + +/* Logging Macros */ +#define RTE_RDEV_LOG(level, fmt, args...) \ + rte_log(RTE_LOG_ ## level, librawdev_logtype, "%s(): " fmt "\n", \ + __func__, ##args) + +#define RTE_RDEV_ERR(fmt, args...) \ + RTE_RDEV_LOG(ERR, fmt, ## args) +#define RTE_RDEV_DEBUG(fmt, args...) \ + RTE_RDEV_LOG(DEBUG, fmt, ## args) +#define RTE_RDEV_INFO(fmt, args...) \ + RTE_RDEV_LOG(INFO, fmt, ## args) + + +/* Macros to check for valid device */ +#define RTE_RAWDEV_VALID_DEVID_OR_ERR_RET(dev_id, retval) do { \ + if (!rte_rawdev_pmd_is_valid_dev((dev_id))) { \ + RTE_RDEV_ERR("Invalid dev_id=%d", dev_id); \ + return retval; \ + } \ +} while (0) + +#define RTE_RAWDEV_VALID_DEVID_OR_RET(dev_id) do { \ + if (!rte_rawdev_pmd_is_valid_dev((dev_id))) { \ + RTE_RDEV_ERR("Invalid dev_id=%d", dev_id); \ + return; \ + } \ +} while (0) + +#define RTE_RAWDEV_DETACHED (0) +#define RTE_RAWDEV_ATTACHED (1) + +/* Global structure used for maintaining state of allocated raw devices. + * + * TODO: Can be expanded to : in future. + * Applications should be able to select from a number of type of raw + * devices which were detected or attached to this DPDK instance. + */ +struct rte_rawdev_global { + /**< Number of devices found */ + uint16_t nb_devs; +}; + +extern struct rte_rawdev_global *rte_rawdev_globals; +/** Pointer to global raw devices data structure. */ +extern struct rte_rawdev *rte_rawdevs; +/** The pool of rte_rawdev structures. */ + +/** + * Get the rte_rawdev structure device pointer for the named device. + * + * @param name + * device name to select the device structure. + * + * @return + * - The rte_rawdev structure pointer for the given device ID. + */ +static inline struct rte_rawdev * +rte_rawdev_pmd_get_named_dev(const char *name) +{ + struct rte_rawdev *dev; + unsigned int i; + + if (name == NULL) + return NULL; + + for (i = 0; i < RTE_RAWDEV_MAX_DEVS; i++) { + dev = &rte_rawdevs[i]; + if ((dev->attached == RTE_RAWDEV_ATTACHED) && + (strcmp(dev->name, name) == 0)) + return dev; + } + + return NULL; +} + +/** + * Validate if the raw device index is a valid attached raw device. + * + * @param dev_id + * raw device index. + * + * @return + * - If the device index is valid (1) or not (0). + */ +static inline unsigned +rte_rawdev_pmd_is_valid_dev(uint8_t dev_id) +{ + struct rte_rawdev *dev; + + if (dev_id >= RTE_RAWDEV_MAX_DEVS) + return 0; + + dev = &rte_rawdevs[dev_id]; + if (dev->attached != RTE_RAWDEV_ATTACHED) + return 0; + else + return 1; +} + +/** + * Definitions of all functions exported by a driver through the + * the generic structure of type *rawdev_ops* supplied in the + * *rte_rawdev* structure associated with a device. + */ + +/** + * Get device information of a device. + * + * @param dev + * Raw device pointer + * @param dev_info + * Raw device information structure + * + * @return + * Returns 0 on success + */ +typedef void (*rawdev_info_get_t)(struct rte_rawdev *dev, + rte_rawdev_obj_t dev_info); + +/** + * Configure a device. + * + * @param dev + * Raw device pointer + * @param config + * Void object containing device specific configuration + * + * @return + * Returns 0 on success + */ +typedef int (*rawdev_configure_t)(const struct rte_rawdev *dev, + rte_rawdev_obj_t config); + +/** + * Start a configured device. + * + * @param dev + * Raw device pointer + * + * @return + * Returns 0 on success + */ +typedef int (*rawdev_start_t)(struct rte_rawdev *dev); + +/** + * Stop a configured device. + * + * @param dev + * Raw device pointer + */ +typedef void (*rawdev_stop_t)(struct rte_rawdev *dev); + +/** + * Close a configured device. + * + * @param dev + * Raw device pointer + * + * @return + * - 0 on success + * - (-EAGAIN) if can't close as device is busy + */ +typedef int (*rawdev_close_t)(struct rte_rawdev *dev); + +/** + * Reset a configured device. + * + * @param dev + * Raw device pointer + * @return + * 0 for success + * !0 for failure + */ +typedef int (*rawdev_reset_t)(struct rte_rawdev *dev); + +/** + * Retrieve the current raw queue configuration. + * + * @param dev + * Raw device pointer + * @param queue_id + * Raw device queue index + * @param[out] queue_conf + * Raw device queue configuration structure + * + */ +typedef void (*rawdev_queue_conf_get_t)(struct rte_rawdev *dev, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf); + +/** + * Setup an raw queue. + * + * @param dev + * Raw device pointer + * @param queue_id + * Rawqueue index + * @param queue_conf + * Rawqueue configuration structure + * + * @return + * Returns 0 on success. + */ +typedef int (*rawdev_queue_setup_t)(struct rte_rawdev *dev, + uint16_t queue_id, + rte_rawdev_obj_t queue_conf); + +/** + * Release resources allocated by given raw queue. + * + * @param dev + * Raw device pointer + * @param queue_id + * Raw queue index + * + */ +typedef int (*rawdev_queue_release_t)(struct rte_rawdev *dev, + uint16_t queue_id); + +/** + * Dump internal information + * + * @param dev + * Raw device pointer + * @param f + * A pointer to a file for output + * @return + * 0 for success, + * !0 Error + * + */ +typedef int (*rawdev_dump_t)(struct rte_rawdev *dev, FILE *f); + +/** Rawdevice operations function pointer table */ +struct rte_rawdev_ops { + /**< Get device info. */ + rawdev_info_get_t dev_info_get; + /**< Configure device. */ + rawdev_configure_t dev_configure; + /**< Start device. */ + rawdev_start_t dev_start; + /**< Stop device. */ + rawdev_stop_t dev_stop; + /**< Close device. */ + rawdev_close_t dev_close; + /**< Reset device. */ + rawdev_reset_t dev_reset; + + /**< Get raw queue configuration. */ + rawdev_queue_conf_get_t queue_def_conf; + /**< Set up an raw queue. */ + rawdev_queue_setup_t queue_setup; + /**< Release an raw queue. */ + rawdev_queue_release_t queue_release; + + /* Dump internal information */ + rawdev_dump_t dump; +}; + +/** + * Allocates a new rawdev slot for an raw device and returns the pointer + * to that slot for the driver to use. + * + * @param name + * Unique identifier name for each device + * @param dev_private_size + * Private data allocated within rte_rawdev object. + * @param socket_id + * Socket to allocate resources on. + * @return + * - Slot in the rte_dev_devices array for a new device; + */ +struct rte_rawdev * __rte_experimental +rte_rawdev_pmd_allocate(const char *name, size_t dev_private_size, + int socket_id); + +/** + * Release the specified rawdev device. + * + * @param rawdev + * The *rawdev* pointer is the address of the *rte_rawdev* structure. + * @return + * - 0 on success, negative on error + */ +int __rte_experimental +rte_rawdev_pmd_release(struct rte_rawdev *rawdev); + +/** + * Creates a new raw device and returns the pointer to that device. + * + * @param name + * Pointer to a character array containing name of the device + * @param dev_private_size + * Size of raw PMDs private data + * @param socket_id + * Socket to allocate resources on. + * + * @return + * - Raw device pointer if device is successfully created. + * - NULL if device cannot be created. + */ +struct rte_rawdev * __rte_experimental +rte_rawdev_pmd_init(const char *name, size_t dev_private_size, + int socket_id); + +/** + * Destroy a raw device + * + * @param name + * Name of the device + * @return + * - 0 on success, negative on error + */ +int __rte_experimental +rte_rawdev_pmd_uninit(const char *name); + +#ifdef __cplusplus +} +#endif + +#endif /* _RTE_RAWDEV_PMD_H_ */ diff --git a/lib/librte_rawdev/rte_rawdev_version.map b/lib/librte_rawdev/rte_rawdev_version.map new file mode 100644 index 0000000000..64e60d945f --- /dev/null +++ b/lib/librte_rawdev/rte_rawdev_version.map @@ -0,0 +1,21 @@ +EXPERIMENTAL { + global: + + rte_rawdev_close; + rte_rawdev_configure; + rte_rawdev_count; + rte_rawdev_get_dev_id; + rte_rawdev_info_get; + rte_rawdev_pmd_allocate; + rte_rawdev_pmd_release; + rte_rawdev_queue_conf_get; + rte_rawdev_queue_setup; + rte_rawdev_queue_release; + rte_rawdev_reset; + rte_rawdev_socket_id; + rte_rawdev_start; + rte_rawdev_stop; + rte_rawdevs; + + local: *; +}; diff --git a/mk/rte.app.mk b/mk/rte.app.mk index 0169f3f5b9..8b05e21947 100644 --- a/mk/rte.app.mk +++ b/mk/rte.app.mk @@ -97,6 +97,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_BBDEV) += -lrte_bbdev _LDLIBS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += -lrte_cryptodev _LDLIBS-$(CONFIG_RTE_LIBRTE_SECURITY) += -lrte_security _LDLIBS-$(CONFIG_RTE_LIBRTE_EVENTDEV) += -lrte_eventdev +_LDLIBS-$(CONFIG_RTE_LIBRTE_RAWDEV) += -lrte_rawdev _LDLIBS-$(CONFIG_RTE_LIBRTE_MEMPOOL) += -lrte_mempool _LDLIBS-$(CONFIG_RTE_DRIVER_MEMPOOL_RING) += -lrte_mempool_ring _LDLIBS-$(CONFIG_RTE_LIBRTE_RING) += -lrte_ring