From: Julien Meunier Date: Wed, 20 Feb 2019 21:05:29 +0000 (+0200) Subject: net/ixgbe: do not start on unsupported loopback mode X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=d54e3fe7dca0b371550611ad0c6585f8f67b45e5;p=dpdk.git net/ixgbe: do not start on unsupported loopback mode Only TX->RX loopback is supported currently on 82599EB. If a user wants to apply an another loopback configuration (!= IXGBE_LPBK_82599_TX_RX), ixgbe PMD ignores it and continues the configuration without raising any error. Let's increase robustness of this part by checking if the requested loopback mode is correct for the current device, before starting it. If it is not valid, PMD will refuse to start. Signed-off-by: Julien Meunier Acked-by: Wei Zhao --- diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c index 749311048c..4deedb0c80 100644 --- a/drivers/net/ixgbe/ixgbe_ethdev.c +++ b/drivers/net/ixgbe/ixgbe_ethdev.c @@ -2652,10 +2652,16 @@ ixgbe_dev_start(struct rte_eth_dev *dev) goto error; } - /* Skip link setup if loopback mode is enabled for 82599. */ - if (hw->mac.type == ixgbe_mac_82599EB && - dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX) - goto skip_link_setup; + /* Skip link setup if loopback mode is enabled. */ + if (dev->data->dev_conf.lpbk_mode != 0) { + err = ixgbe_check_supported_loopback_mode(dev); + if (err < 0) { + PMD_INIT_LOG(ERR, "Unsupported loopback mode"); + goto error; + } else { + goto skip_link_setup; + } + } if (ixgbe_is_sfp(hw) && hw->phy.multispeed_fiber) { err = hw->mac.ops.setup_sfp(hw); diff --git a/drivers/net/ixgbe/ixgbe_rxtx.c b/drivers/net/ixgbe/ixgbe_rxtx.c index 9a79d18e49..c9a70a8232 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.c +++ b/drivers/net/ixgbe/ixgbe_rxtx.c @@ -4879,13 +4879,18 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev) hlreg0 &= ~IXGBE_HLREG0_JUMBOEN; /* - * If loopback mode is configured for 82599, set LPBK bit. + * If loopback mode is configured, set LPBK bit. */ - if (hw->mac.type == ixgbe_mac_82599EB && - dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX) + if (dev->data->dev_conf.lpbk_mode != 0) { + rc = ixgbe_check_supported_loopback_mode(dev); + if (rc < 0) { + PMD_INIT_LOG(ERR, "Unsupported loopback mode"); + return rc; + } hlreg0 |= IXGBE_HLREG0_LPBK; - else + } else { hlreg0 &= ~IXGBE_HLREG0_LPBK; + } IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); @@ -5061,6 +5066,21 @@ ixgbe_dev_tx_init(struct rte_eth_dev *dev) ixgbe_dev_mq_tx_configure(dev); } +/* + * Check if requested loopback mode is supported + */ +int +ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev) +{ + struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private); + + if (dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX) + if (hw->mac.type == ixgbe_mac_82599EB) + return 0; + + return -ENOTSUP; +} + /* * Set up link for 82599 loopback mode Tx->Rx. */ @@ -5148,10 +5168,11 @@ ixgbe_dev_rxtx_start(struct rte_eth_dev *dev) rxctrl |= IXGBE_RXCTRL_RXEN; hw->mac.ops.enable_rx_dma(hw, rxctrl); - /* If loopback mode is enabled for 82599, set up the link accordingly */ - if (hw->mac.type == ixgbe_mac_82599EB && - dev->data->dev_conf.lpbk_mode == IXGBE_LPBK_82599_TX_RX) - ixgbe_setup_loopback_link_82599(hw); + /* If loopback mode is enabled, set up the link accordingly */ + if (dev->data->dev_conf.lpbk_mode != 0) { + if (hw->mac.type == ixgbe_mac_82599EB) + ixgbe_setup_loopback_link_82599(hw); + } #ifdef RTE_LIBRTE_SECURITY if ((dev->data->dev_conf.rxmode.offloads & diff --git a/drivers/net/ixgbe/ixgbe_rxtx.h b/drivers/net/ixgbe/ixgbe_rxtx.h index 39378f7547..505d344b9c 100644 --- a/drivers/net/ixgbe/ixgbe_rxtx.h +++ b/drivers/net/ixgbe/ixgbe_rxtx.h @@ -276,6 +276,7 @@ void ixgbe_set_tx_function(struct rte_eth_dev *dev, struct ixgbe_tx_queue *txq); */ void ixgbe_set_rx_function(struct rte_eth_dev *dev); +int ixgbe_check_supported_loopback_mode(struct rte_eth_dev *dev); uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts); uint16_t ixgbe_recv_scattered_pkts_vec(void *rx_queue,