From: Bruce Richardson Date: Thu, 10 Oct 2019 10:46:23 +0000 (+0100) Subject: net: remove ethernet packing and set two-byte alignment X-Git-Url: http://git.droids-corp.org/?a=commitdiff_plain;h=da5350ef29afd35c1adabe76f60832f3092269ad;p=dpdk.git net: remove ethernet packing and set two-byte alignment The ether header does not need to be packed since that makes no sense for structures with only bytes in them, but it should be aligned to a two-byte boundary to simplify access to it from code. Other packed structures that use this also need to be updated to take account of the change, either by removing packing - where it is clearly unneeded - or by explicitly giving those structures 2-byte alignment also. Signed-off-by: Stephen Hemminger Signed-off-by: Bruce Richardson --- diff --git a/doc/guides/rel_notes/deprecation.rst b/doc/guides/rel_notes/deprecation.rst index 3aa16347c5..4249aab833 100644 --- a/doc/guides/rel_notes/deprecation.rst +++ b/doc/guides/rel_notes/deprecation.rst @@ -48,16 +48,6 @@ Deprecation Notices structure would be made internal (or removed if all dependencies are cleared) in future releases. -* net: The Ethernet address and header definitions will change - attributes. The Ethernet address struct will no longer be marked as - packed since the packed attribute is meaningless on a byte - array. The Ethernet header will be marked as aligned on a 2-byte - boundary and will no longer have the packed attribute. This allows - for efficient access on CPU architectures where unaligned access is - expensive. These changes should not impact normal usage because drivers - naturally align the Ethernet header on receive and all known - encapsulations preserve the alignment of the header. - * ethdev: The function ``rte_eth_dev_count`` will be removed in DPDK 20.02. It is replaced by the function ``rte_eth_dev_count_avail``. If the intent is to iterate over ports, ``RTE_ETH_FOREACH_*`` macros diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst index 0e5bb5d3f1..ae8e7b2f09 100644 --- a/doc/guides/rel_notes/release_19_11.rst +++ b/doc/guides/rel_notes/release_19_11.rst @@ -359,6 +359,12 @@ ABI Changes Also, make sure to start the actual text at the margin. ========================================================= +* net: The Ethernet address and other header definitions have changed + attributes. They have been modified to be aligned on 2-byte boundaries. + These changes should not impact normal usage because drivers naturally + align the Ethernet header on receive and all known encapsulations + preserve the alignment of the header. + Shared Library Versions ----------------------- diff --git a/drivers/net/bonding/rte_eth_bond_8023ad.h b/drivers/net/bonding/rte_eth_bond_8023ad.h index cbad59aa7c..62265f449f 100644 --- a/drivers/net/bonding/rte_eth_bond_8023ad.h +++ b/drivers/net/bonding/rte_eth_bond_8023ad.h @@ -60,7 +60,7 @@ struct slow_protocol { struct slow_protocol_frame { struct rte_ether_hdr eth_hdr; struct slow_protocol slow_protocol; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct port_params { uint16_t system_priority; @@ -73,7 +73,7 @@ struct port_params { /**< Priority of this (unused in current implementation) */ uint16_t port_number; /**< Port number. It corresponds to slave port id. */ -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct lacpdu_actor_partner_params { uint8_t tlv_type_info; @@ -81,7 +81,7 @@ struct lacpdu_actor_partner_params { struct port_params port_params; uint8_t state; uint8_t reserved_3[3]; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); /** LACPDU structure (5.4.2 in 802.1AX documentation). */ struct lacpdu { @@ -99,13 +99,13 @@ struct lacpdu { uint8_t tlv_type_terminator; uint8_t terminator_length; uint8_t reserved_50[50]; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); /** LACPDU frame: Contains ethernet header and LACPDU. */ struct lacpdu_header { struct rte_ether_hdr eth_hdr; struct lacpdu lacpdu; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct marker { uint8_t subtype; @@ -121,12 +121,12 @@ struct marker { uint8_t tlv_type_terminator; uint8_t terminator_length; uint8_t reserved_90[90]; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct marker_header { struct rte_ether_hdr eth_hdr; struct marker marker; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct rte_eth_bond_8023ad_conf { uint32_t fast_periodic_ms; diff --git a/lib/librte_net/rte_arp.h b/lib/librte_net/rte_arp.h index ccb6875cf0..fabd686243 100644 --- a/lib/librte_net/rte_arp.h +++ b/lib/librte_net/rte_arp.h @@ -26,7 +26,7 @@ struct rte_arp_ipv4 { uint32_t arp_sip; /**< sender IP address */ struct rte_ether_addr arp_tha; /**< target hardware address */ uint32_t arp_tip; /**< target IP address */ -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); /** * ARP header. @@ -47,7 +47,7 @@ struct rte_arp_hdr { #define RTE_ARP_OP_INVREPLY 9 /* response identifying peer */ struct rte_arp_ipv4 arp_data; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); /** * @warning diff --git a/lib/librte_net/rte_ether.h b/lib/librte_net/rte_ether.h index 13210f2fd0..e069dc7fe0 100644 --- a/lib/librte_net/rte_ether.h +++ b/lib/librte_net/rte_ether.h @@ -59,7 +59,7 @@ extern "C" { */ struct rte_ether_addr { uint8_t addr_bytes[RTE_ETHER_ADDR_LEN]; /**< Addr bytes in tx order */ -} __attribute__((__packed__)); +} __attribute__((aligned(2))); #define RTE_ETHER_LOCAL_ADMIN_ADDR 0x02 /**< Locally assigned Eth. address. */ #define RTE_ETHER_GROUP_ADDR 0x01 /**< Multicast or broadcast Eth. address. */ @@ -81,8 +81,8 @@ struct rte_ether_addr { static inline int rte_is_same_ether_addr(const struct rte_ether_addr *ea1, const struct rte_ether_addr *ea2) { - const unaligned_uint16_t *w1 = (const uint16_t *)ea1; - const unaligned_uint16_t *w2 = (const uint16_t *)ea2; + const uint16_t *w1 = (const uint16_t *)ea1; + const uint16_t *w2 = (const uint16_t *)ea2; return ((w1[0] ^ w2[0]) | (w1[1] ^ w2[1]) | (w1[2] ^ w2[2])) == 0; } @@ -99,7 +99,7 @@ static inline int rte_is_same_ether_addr(const struct rte_ether_addr *ea1, */ static inline int rte_is_zero_ether_addr(const struct rte_ether_addr *ea) { - const unaligned_uint16_t *w = (const uint16_t *)ea; + const uint16_t *w = (const uint16_t *)ea; return (w[0] | w[1] | w[2]) == 0; } @@ -146,7 +146,7 @@ static inline int rte_is_multicast_ether_addr(const struct rte_ether_addr *ea) */ static inline int rte_is_broadcast_ether_addr(const struct rte_ether_addr *ea) { - const unaligned_uint16_t *ea_words = (const unaligned_uint16_t *)ea; + const uint16_t *ea_words = (const uint16_t *)ea; return (ea_words[0] == 0xFFFF && ea_words[1] == 0xFFFF && ea_words[2] == 0xFFFF); @@ -273,7 +273,7 @@ struct rte_ether_hdr { struct rte_ether_addr d_addr; /**< Destination address. */ struct rte_ether_addr s_addr; /**< Source address. */ uint16_t ether_type; /**< Frame type. */ -} __attribute__((__packed__)); +} __attribute__((aligned(2))); /** * Ethernet VLAN Header. diff --git a/lib/librte_pipeline/rte_table_action.c b/lib/librte_pipeline/rte_table_action.c index 961f006607..9ce98f2ceb 100644 --- a/lib/librte_pipeline/rte_table_action.c +++ b/lib/librte_pipeline/rte_table_action.c @@ -439,7 +439,7 @@ encap_cfg_check(struct rte_table_action_encap_config *encap) struct encap_ether_data { struct rte_ether_hdr ether; -} __attribute__((__packed__)); +}; #define VLAN(pcp, dei, vid) \ ((uint16_t)((((uint64_t)(pcp)) & 0x7LLU) << 13) | \ @@ -449,13 +449,13 @@ struct encap_ether_data { struct encap_vlan_data { struct rte_ether_hdr ether; struct rte_vlan_hdr vlan; -} __attribute__((__packed__)); +}; struct encap_qinq_data { struct rte_ether_hdr ether; struct rte_vlan_hdr svlan; struct rte_vlan_hdr cvlan; -} __attribute__((__packed__)); +}; #define ETHER_TYPE_MPLS_UNICAST 0x8847 @@ -471,7 +471,7 @@ struct encap_mpls_data { struct rte_ether_hdr ether; uint32_t mpls[RTE_TABLE_ACTION_MPLS_LABELS_MAX]; uint32_t mpls_count; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); #define PPP_PROTOCOL_IP 0x0021 @@ -480,12 +480,12 @@ struct pppoe_ppp_hdr { uint16_t session_id; uint16_t length; uint16_t protocol; -} __attribute__((__packed__)); +}; struct encap_pppoe_data { struct rte_ether_hdr ether; struct pppoe_ppp_hdr pppoe_ppp; -} __attribute__((__packed__)); +}; #define IP_PROTO_UDP 17 @@ -494,7 +494,7 @@ struct encap_vxlan_ipv4_data { struct rte_ipv4_hdr ipv4; struct rte_udp_hdr udp; struct rte_vxlan_hdr vxlan; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct encap_vxlan_ipv4_vlan_data { struct rte_ether_hdr ether; @@ -502,14 +502,14 @@ struct encap_vxlan_ipv4_vlan_data { struct rte_ipv4_hdr ipv4; struct rte_udp_hdr udp; struct rte_vxlan_hdr vxlan; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct encap_vxlan_ipv6_data { struct rte_ether_hdr ether; struct rte_ipv6_hdr ipv6; struct rte_udp_hdr udp; struct rte_vxlan_hdr vxlan; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct encap_vxlan_ipv6_vlan_data { struct rte_ether_hdr ether; @@ -517,14 +517,14 @@ struct encap_vxlan_ipv6_vlan_data { struct rte_ipv6_hdr ipv6; struct rte_udp_hdr udp; struct rte_vxlan_hdr vxlan; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); struct encap_qinq_pppoe_data { struct rte_ether_hdr ether; struct rte_vlan_hdr svlan; struct rte_vlan_hdr cvlan; struct pppoe_ppp_hdr pppoe_ppp; -} __attribute__((__packed__)); +} __attribute__((__packed__)) __attribute__((aligned(2))); static size_t encap_data_size(struct rte_table_action_encap_config *encap)